# changelog

author: Paul Howarth <paul@city-fan.org> - 1.95.1-1
changelog:
  - Update to 1.951
    (1.950)
    - MAJOR BEHAVIOR CHANGE:
      - ssl_verify_mode now defaults to verify_peer for client
      - Previously it used verify_none, but loudly complained since 1.79 about it
      - It will not complain any longer, but the connection will probably fail
      - Please don't simply disable ssl verification; instead, set SSL_ca_file
        etc. so that verification succeeds!
    - MAJOR BEHAVIOR CHANGE:
      - It will now complain if the built-in defaults of certs/my-ca.pem or ca/
        for CA and certs/{server,client}-{key,cert}.pem for cert and key are
        used, i.e. no certificates are specified explicitly
      - In the future these insecure (relative path!) defaults will be removed
        and the CA replaced with the system defaults
    (1.951)
    - Use Net::SSLeay::SSL_CTX_set_default_verify_paths to use openssl's built-in
      defaults for CA unless CA path/file was given (or IO::Socket::SSL built-ins
      used)


author: Paul Howarth <paul@city-fan.org> - 1.95.4-1
changelog:
  - Update to 1.954
    - Accept older versions of ExtUtils::MakeMaker and add meta information like
      link to repository only for newer versions


author: Paul Howarth <paul@city-fan.org> - 1.95.5-1
changelog:
  - Update to 1.955
    - Support for perfect forward secrecy using ECDH, if the Net::SSLeay version
      supports it


author: Paul Howarth <paul@city-fan.org> - 1.95.8-1
changelog:
  - Update to 1.958
    Lots of behavior changes for more secure defaults:
    - BEHAVIOR CHANGE: make default cipher list more secure, especially:
      - No longer support MD5 by default (broken)
      - No longer support anonymous authentication by default (vulnerable to
        man in the middle attacks)
      - Prefer ECDHE/DHE ciphers and add necessary ECDH curve and DH keys, so
        that it uses by default forward secrecy, if underlying
        Net::SSLeay/openssl supports it
      - Move RC4 to the end, i.e. 3DES is preferred (BEAST attack should
        hopefully have been fixed and now RC4 is considered less safe than 3DES)
      - Default SSL_honor_cipher_order to 1, e.g. when used as server it tries
        to get the best cipher even if the client prefers other ciphers; PLEASE
        NOTE that this might break connections with older, less secure
        implementations, in which case revert to 'ALL:!LOW:!EXP:!aNULL' or so
    - BEHAVIOR CHANGE: SSL_cipher_list now gets set on context, not SSL object,
      and thus gets reused if context gets reused; PLEASE NOTE that using
      SSL_cipher_list together with SSL_reuse_ctx no longer has any effect on
      the ciphers of the context
    - Rework hostname verification schemes:
      - Add RFC names as scheme (e.g. 'rfc2818', ...)
      - Add SIP, SNMP, syslog, netconf, GIST
      - BEHAVIOR CHANGE: fix SMTP - now accept wildcards in CN and subjectAltName
      - BEHAVIOR CHANGE: fix IMAP, POP3, ACAP, NNTP - now accept wildcards in CN
    - BEHAVIOR CHANGE: anywhere wildcards like www* now match only 'www1',
      'www2' etc.  but not 'www'
    - Anywhere wildcards like x* are no longer applied to IDNA names (which start
      with 'xn--')
    - Fix crash of Utils::CERT_free
    - Support TLSv11, TLSv12 as handshake protocols
    - Fixed t/core.t: test used cipher_list of HIGH, which includes anonymous
      authorization; with the DH param given by default since 1.956, old versions
      of openssl (like 0.9.8k) used cipher ADH-AES256-SHA (e.g. anonymous
      authorization) instead of AES256-SHA and thus the check for the peer
      certificate failed (because ADH does not exchange certificates) - fixed by
      explicitly specifying HIGH:!aNULL as cipher (CPAN RT#90221)
    - Cleaned up tests:
      - Remove ssl_settings.req and 02settings.t, because all tests now create a
        simple socket at 127.0.0.1 and thus global settings are no longer needed
      - Some tests did not have use strict(!); fixed it
      - Removed special handling for older Net::SSLeay versions that are less
        than our minimum requirement
      - Some syntax enhancements: removed some SSL_version and SSL_cipher_list
        options where they were not really needed
    - Cleanup: remove workaround for old IO::Socket::INET6 but instead require at
      least version 2.55 which is now 5 years old
    - Fix t/session.t to work with older openssl versions (CPAN RT#90240)


author: Paul Howarth <paul@city-fan.org> - 1.960-1
changelog:
  - Update to 1.960
    - Only documentation enhancements:
      - Clarify with text and example code, that within event loops not only
        select/poll should be used, but also pending has to be called
      - Better introduction into SSL; at least mention anonymous authentication as
        something you don't want and should take care with the right cipher
      - Make it more clear that it's better not to change the cipher list unless
        you really know what you're doing
  - Adopt upstream's versioning scheme


author: Paul Howarth <paul@city-fan.org> - 1.961-1
changelog:
  - Update to 1.961
    - IO::Socket::SSL::Utils::CERT_create can now create CA-certificates that
      are not self-signed (by giving issuer_*)


author: Paul Howarth <paul@city-fan.org> - 1.962-1
changelog:
  - Update to 1.962
    - Work around problems with older F5 BIG-IP by offering fewer ciphers on the
      client side by default, so that the client hello stays below 255 bytes


author: Paul Howarth <paul@city-fan.org> - 1.963-1
changelog:
  - Update to 1.963
    - Fix behavior of stop_SSL: for blocking sockets it now enough to call it
      once, for non-blocking it should be called again as long as EAGAIN and
      SSL_ERROR is set to SSL_WANT_(READ|WRITE)
    - Don't call blocking if start_SSL failed and downgraded socket has no
      blocking method
    - Documentation enhancements:
      - Special section for differences to IO::Socket
      - Describe problem with blocking accept on non-blocking socket
      - Describe arguments to new_from_fd and make clear that for upgrading an
        existing IO::Socket, start_SSL should be used directly


author: Paul Howarth <paul@city-fan.org> - 1.964-1
changelog:
  - Update to 1.964
    - Disabling TLSv1_1 did not work, because the constant was wrong; now it gets
      the constants from calling Net::SSLeay::SSL_OP_NO_TLSv1_1 etc.
    - The new syntax for the protocols is TLSv1_1 instead of TLSv11, which matches
      the syntax from OpenSSL (the old syntax continues to work in SSL_version)
    - New functions get_sslversion and get_sslversion_int, which get the SSL
      version of the established session as string or int
    - Disable t/io-socket-inet6.t if Acme::Override::INET is installed


author: Paul Howarth <paul@city-fan.org> - 1.965-1
changelog:
  - Update to 1.965
    - New key SSL_session_key to influence how sessions are inserted and looked
      up in the client's session cache, which makes it possible to share sessions
      over different ip:host (as is required with some FTPS servers)
    - t/core.t - handle case where default loopback source is not 127.0.0.1, like
      in FreeBSD jails


author: Paul Howarth <paul@city-fan.org> - 1.966-1
changelog:
  - Update to 1.966
    - Fixed bug introduced in 1.964 - disabling TLSv1_2 no longer worked by
      specifying !TLSv12; only !TLSv1_2 worked
    - Fixed leak of session objects in SessionCache, if another session
      replaced an existing session (introduced in 1.965)


author: Paul Howarth <paul@city-fan.org> - 1.967-1
changelog:
  - Update to 1.967
    - Verify the hostname inside a certificate by default with a superset of
      common verification schemes instead of not verifying identity at all; for
      now it will only complain if name verification failed but in the future it
      will fail certificate verification, forcing you to set the expected
      SSL_verifycn_name if you want to accept the certificate
    - New option SSL_fingerprint and new methods get_fingerprint and
      get_fingerprint_bin; together they can be used to selectively accept
      specific certificates that would otherwise fail verification, like
      self-signed, outdated or from unknown CAs
    - Utils:
      - Default RSA key length 2048
      - Digest algorithm to sign certificate in CERT_create can be given;
        defaults to SHA-256
      - CERT_create can now issue non-CA self-signed certificate
      - CERT_create add some more useful constraints to certificate
    - Spelling fixes


author: Paul Howarth <paul@city-fan.org> - 1.968-1
changelog:
  - Update to 1.968
    - BEHAVIOR CHANGE: removed implicit defaults of certs/server-{cert,key}.pem
      for SSL_{cert,key}_file and ca/,certs/my-ca.pem for SSL_ca_file; these
      defaults were deprecated since 1.951 (July 2013)
    - Usable CA verification path on Windows etc.:
      - Do not use Net::SSLeay::CTX_set_default_verify_paths any longer to set
        system/build dependent default verification path, because there was no
        way to retrieve these default values and check if they contained usable
        CA
      - Instead, re-implement the same algorithm and export the results with
        public function default_ca() and make it possible to overwrite it
      - Also check for usable verification path during build; if no usable path
        is detected, require Mozilla::CA at build and try to use it at runtime


author: Paul Howarth <paul@city-fan.org> - 1.969-1
changelog:
  - Update to 1.969
    - Fix set_defaults to match documentation regarding short names
    - New function set_args_filter_hack to make it possible to override bad SSL
      settings from other code at the last moment
    - Determine default_ca on module load (and not on first use in each thread)
    - Don't try default hostname verification if verify_mode 0
    - Fix hostname verification when reusing context


author: Paul Howarth <paul@city-fan.org> - 1.970-1
changelog:
  - Update to 1.970
    - Make sure sub default_ca uses a local $_ and not a version of an outer
      scope that might be read-only (CPAN RT#93987)


author: Paul Howarth <paul@city-fan.org> - 1.971-1
changelog:
  - Update to 1.971
    - Try to use SSL_hostname for hostname verification if no SSL_verifycn_name
      is given; this way, hostname for SNI and verification can be specified in
      one step
    - New test program example/simulate_proxy.pl


author: Paul Howarth <paul@city-fan.org> - 1.972-1
changelog:
  - Update to 1.972
    - Make sure t/external/usable_ca.t works also with older openssl without
      support for SNI (CPAN RT#94117)


author: Paul Howarth <paul@city-fan.org> - 1.973-1
changelog:
  - Update to 1.973
    - With SSL_ca, certificate handles can now be used in addition to
      SSL_ca_file and SSL_ca_path
    - No longer complain if SSL_ca_file and SSL_ca_path are both given;
      instead, add both as options to the CA store
    - Shortcut 'issuer' to give both issuer_cert and issuer_key in CERT_create


author: Paul Howarth <paul@city-fan.org> - 1.974-1
changelog:
  - Update to 1.974
    - New function peer_certificates to get the whole certificate chain; needs
      Net::SSLeay ≥ 1.58
    - Extended IO::Socket::Utils::CERT_asHash to provide way more information,
      like issuer information, cert and pubkey digests, all extensions, CRL
      distribution points and OCSP uri


author: Paul Howarth <paul@city-fan.org> - 1.975-1
changelog:
  - Update to 1.975
    - BEHAVIOR CHANGE: work around TEA misfeature on OS X built-in openssl, e.g.
      guarantee that only the explicitly-given CA or the openssl default CA will
      be used; this means that certificates inside the OS X keyring will no
      longer be used, because there is no way to control the use by openssl
      (e.g. certificate pinning etc.)
    - Make external tests run by default to make sure default CA works on all
      platforms; it skips automatically on network problems like timeouts or SSL
      interception, and can also use http(s)_proxy environment variables


author: Paul Howarth <paul@city-fan.org> - 1.978-1
changelog:
  - Update to 1.978
    - Added public prefix checking to verification of wildcard certificates, e.g.
      accept *.foo.com but not *.co.uk; see documentation of
      SSL_verifycn_publicsuffix and IO::Socket::SSL::PublicSuffix
    - Fix publicsuffix for IDNA, more tests with various IDNA libs
      (CPAN RT#94424)
    - Reuse result of IDN lib detection from PublicSuffix.pm in SSL.pm
    - Add more checks to external/usable_ca.t; now it is enough that at least one
      of the hosts verifies against the built-in CA store
    - Add openssl and Net::SSLeay version to diagnostics in load test
  - Switch preferred IDN back-end from Net::LibIDN to URI::_idna as per upstream,
    falling back to Net::IDN::Encode on older distributions
  - Add fix from upstream git to support building with Test::More < 0.88


author: Paul Howarth <paul@city-fan.org> - 1.979-1
changelog:
  - Update to 1.979
    - Hostname checking:
      - Configuration of 'leftmost' is renamed to 'full_label', but the old
        version is kept for compatibility reasons
      - Documentation of predefined schemes fixed to match reality


author: Paul Howarth <paul@city-fan.org> - 1.980-1
changelog:
  - Update to 1.980
    - Disable elliptic curve support for openssl 1.0.1d on 64-bit
      (http://rt.openssl.org/Ticket/Display.html?id=2975)
    - Fix certificate fingerprint calculation
  - Add patch to skip elliptic curve test for openssl 1.0.1d on 64-bit
  - Add patch to fix openssl version test


author: Paul Howarth <paul@city-fan.org> - 1.981-1
changelog:
  - Update to 1.981
    - Fix ecdhe test for openssl 1.0.1d (CPAN RT#95432)
    - Fix detection of openssl 1.0.1d (detected 1.0.1e instead)
    - New function can_ecdh in IO::Socket::SSL


author: Paul Howarth <paul@city-fan.org> - 1.983-1
changelog:
  - Update to 1.983
    - Fix public suffix handling: ajax.googleapis.com should be ok even if
      googleapis.com is in public suffix list (e.g. check one level less)
      (CPAN RT#95317)
    - usable_ca.t - update fingerprints after heartbleed attack
    - usable_ca.t - make sure we have usable CA for tested hosts in CA store


author: Paul Howarth <paul@city-fan.org> - 1.984-1
changelog:
  - Update to 1.984
    - Added OCSP support:
      - Needs Net::SSLeay ≥ 1.59
      - For usage see documentation of IO::Socket::SSL (examples and anything
        with OCSP in the name)
    - New tool util/analyze-ssl.pl, which is intended to help in debugging of SSL
      problems and to get information about capabilities of server; it works also
      as an example of how to use various features (like OCSP, SNI...)
    - Fix peer_certificates (returns leaf certificate only once on client side)
    - Added timeout for stop_SSL (either with Timeout or with the default timeout
      for IO::Socket)
    - Fix IO::Socket::SSL::Utils mapping between ASN1_TIME and time_t when local
      time is not GMT; use Net::SSLeay::ASN1_TIME_timet if available
    - Fix t/external/usable_ca.t for system with junk in CA files


author: Paul Howarth <paul@city-fan.org> - 1.985-1
changelog:
  - Update to 1.985
    - Make OCSP callback return 1 even if it was called on the server side
      because of bad setup of the socket; otherwise we get an endless calling of
      the OCSP callback
    - Consider an OCSP response that is not yet or no longer valid a soft error
      instead of a hard error
    - Fix skip in t/external/ocsp.t in case fingerprint does not match
    - Call EVP_PKEY_free not EVP_KEY_free in IO::Socket::SSL::Utils::KEY_free
      (CPAN RT#95633)
    - util/analyze.pl - with --show-chain check if chain with SNI is different
      from chain w/o SNI
  - Drop ExtUtils::MakeMaker version requirement


author: Paul Howarth <paul@city-fan.org> - 1.988-1
changelog:
  - Update to 1.988
    - Allow IPv4 in common name, because browsers allow this too; only for scheme
      www/http though, not for rfc2818 (because RC2818 does not allow this; in
      default scheme IPv6 and IPv4 are allowed in CN)
    - Fix handling of public suffix; add exemption for *.googleapis.com
      wildcard, which should not be allowed according to public suffix list but
      actually is used
    - Add hostname verification test based on older test of chromium, but change
      some of the test expectations because we don't want to support IP as SAN
      DNS and because we enforce a public suffix list (and thus *.co.uk should
      not be allowed)
    - Fix t/verify_hostname_standalone.t on systems without usable IDNA or IPv6
      (CPAN RT#95719)
    - Enable IPv6 support only if we have a usable inet_pton
    - Remove stale entries from MANIFEST
    - Add transparent support for DER and PKCS#12 files to specify cert and key,
      e.g. it will autodetect the format
    - If SSL_cert_file is PEM and no SSL_key_file is given it will check if the
      key is in SSL_cert_file too


author: Paul Howarth <paul@city-fan.org> - 1.990-1
changelog:
  - Update to 1.990
    - Added option SSL_ocsp_staple_callback to get the stapled OCSP response and
      verify it somewhere else
    - Try to fix warnings on Windows again (CPAN RT#95967)
    - Work around temporary OCSP error in t/external/ocsp.t


author: Paul Howarth <paul@city-fan.org> - 1.991-1
changelog:
  - Update to 1.991
    - New option SSL_OCSP_TRY_STAPLE to enforce staple request even if
      VERIFY_NONE
    - Work around for CPAN RT#96013 in peer_certificates


author: Paul Howarth <paul@city-fan.org> - 1.992-1
changelog:
  - Update to 1.992
    - Set $! to undef before doing IO (accept, read...); on Windows a connection
      reset could cause an SSL read error without setting $!, so make sure we
      don't keep the old value and maybe thus run into an endless loop


author: Paul Howarth <paul@city-fan.org> - 1.993-1
changelog:
  - Update to 1.993
    - Major rewrite of documentation, now in separate file
    - Rework error handling to distinguish between SSL errors and internal errors
      (like missing capabilities)
    - Fix handling of default_ca if given during the run of the program
      (Debian #750646)
    - util/analyze-ssl.pl - fix hostname check if SNI does not work


author: Paul Howarth <paul@city-fan.org> - 1.994-1
changelog:
  - Update to 1.994
    - IO::Socket::SSL can now be used as dual-use socket, e.g. start plain,
      upgrade to SSL and downgrade again all with the same object; see
      documentation of SSL_startHandshake and chapter Advanced Usage
    - Try to apply SSL_ca* even if verify_mode is 0, but don't complain if this
      fails; this is needed if one wants to explicitly verify OCSP lookups even
      if verification is otherwise off, because otherwise the signature check
      would fail (this is mostly useful for testing)
    - Reorder documentation of attributes for new, so that the more important
      ones are at the top


author: Paul Howarth <paul@city-fan.org> - 1.997-1
changelog:
  - Update to 1.997
    - Fix initialization and creation of OpenSSL-internals for perlcc
      compatibility (CPAN RT#95452)
    - Add refresh option for peer_certificate, so that it checks if the
      certificate changed in the mean time (on renegotiation)
    - Fix fingerprint checking - now applies only to top-most certificate
    - IO::Socket::SSL::Utils - accept extensions within CERT_create
    - Various documentation fixes


author: Paul Howarth <paul@city-fan.org> - 1.997-2
changelog:
  - Use system-wide default cipher list to support use of system-wide
    crypto policy (#1076390, #1127577, CPAN RT#97816)
    https://fedoraproject.org/wiki/Changes/CryptoPolicy


author: Paul Howarth <paul@city-fan.org> - 1.998-1
changelog:
  - Update to 1.998
    - Make client authentication work at the server side when SNI is in by use
      having CA path and other settings in all SSL contexts instead of only the
      main one (https://github.com/noxxi/p5-io-socket-ssl/pull/15)


author: Paul Howarth <paul@city-fan.org> - 1.999-1
changelog:
  - Update to 1.999
    - Make sure we don't use version 0.30 of IO::Socket::IP
    - Make sure that PeerHost is checked in all places where PeerAddr is checked,
      because these are synonyms and IO::Socket::IP prefers PeerHost while others
      prefer PeerAddr; also accept PeerService additionally to PeerPort
      (https://github.com/noxxi/p5-io-socket-ssl/issues/16)
    - Add ability to use client certificates and to overwrite hostname with
      util/analyze-ssl.pl


author: Paul Howarth <paul@city-fan.org> - 2.000-1
changelog:
  - Update to 2.000
    - Consider SSL3.0 as broken because of POODLE and disable it by default
    - Skip live tests without asking if environment NO_NETWORK_TESTING is set
    - Skip tests that require fork on non-default windows setups without proper
      fork (https://github.com/noxxi/p5-io-socket-ssl/pull/18)
  - Note that this package still uses system-default cipher and SSL versions,
    which may have SSL3.0 enabled


author: Paul Howarth <paul@city-fan.org> - 2.001-1
changelog:
  - Update to 2.001
    - Add SSL_OP_SINGLE_(DH|ECDH)_USE to default options to increase PFS security
    - Update external tests with currently expected fingerprints of hosts
    - Some fixes to make it still work on 5.8.1


author: Paul Howarth <paul@city-fan.org> - 2.002-1
changelog:
  - Update to 2.002
    - Fix check for (invalid) IPv4 when validating hostname against certificate;
      do not use inet_aton any longer because it can cause DNS lookups for
      malformed IP (CPAN RT#99448)
    - Update PublicSuffix with latest version from publicsuffix.org - lots of new
      top level domains
    - Add exception to PublicSuffix for s3.amazonaws.com (CPAN RT#99702)


author: Paul Howarth <paul@city-fan.org> - 2.006-1
changelog:
  - Update to 2.006
    - Make SSLv3 available even if the SSL library disables it by default in
      SSL_CTX_new (like done in LibreSSL); default will stay to disable SSLv3
      so this will be only done when setting SSL_version explicitly
    - Fix possible segmentation fault when trying to use an invalid certificate
    - Use only the ICANN part of the default public suffix list and not the
      private domains; this makes existing exceptions for s3.amazonaws.com and
      googleapis.com obsolete
    - Fix t/protocol_version.t to deal with OpenSSL installations that are
      compiled without SSLv3 support
    - Make (hopefully) non-blocking work on windows by using EWOULDBLOCK instead
      of EAGAIN; while this is the same on UNIX it is different on Windows and
      socket operations return there (WSA)EWOULDBLOCK and not EAGAIN
    - Enable non-blocking tests on Windows too
    - Make PublicSuffix::_default_data thread safe
    - Update PublicSuffix with latest list from publicsuffix.org
  - Note that this package still uses system-default cipher and SSL versions,
    which may have SSL3.0 enabled
  - Classify buildreqs by usage


author: Paul Howarth <paul@city-fan.org> - 2.007-1
changelog:
  - Update to 2.007
    - Make getline/readline fall back to super class if class is not sslified
      yet, i.e. behave the same as sysread, syswrite etc. (CPAN RT#100529)


author: Paul Howarth <paul@city-fan.org> - 2.008-1
changelog:
  - Update to 2.008
    - Work around recent OCSP verification errors for revoked.grc.com (badly
      signed OCSP response, Firefox also complains about it) in test
      t/external/ocsp.t
    - util/analyze.pl - report more details about preferred cipher for specific
      TLS versions


author: Paul Howarth <paul@city-fan.org> - 2.009-1
changelog:
  - Update to 2.009
    - Remove util/analyze.pl; this tool is now together with other SSL tools at
      https://github.com/noxxi/p5-ssl-tools
    - Added ALPN support (needs OpenSSL1.02, Net::SSLeay 1.56+) (CPAN RT#101452)


author: Paul Howarth <paul@city-fan.org> - 2.010-1
changelog:
  - Update to 2.010
    - New options SSL_client_ca_file and SSL_client_ca to let the server send the
      list of acceptable CAs for the client certificate
    - t/protocol_version.t - fix in case SSLv3 is not supported in Net::SSLeay
      (CPAN RT#101485)


author: Paul Howarth <paul@city-fan.org> - 2.011-1
changelog:
  - Update to 2.011
    - Fix t/ocsp.t - don't count on revoked.grc.com using OCSP stapling
      (CPAN RT#101855)
    - Added option 'purpose' to Utils::CERT_create to get better control of the
      certificate's purpose; default is 'server,client' for non-CA (contrary to
      only 'server' before)
    - Removed RC4 from default cipher suites on the server side
      (https://github.com/noxxi/p5-io-socket-ssl/issues/22)
    - Refactoring of some tests using Test::More
  - Note that this package still uses system-default cipher and SSL versions,
    which may have RC4 enabled
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.013-1
changelog:
  - Update to 2.013
    - Assign severities to internal error handling and make sure that follow-up
      errors like "configuration failed" or "certificate verify error" don't
      replace more specific "hostname verification failed" when reporting in
      sub errstr/$SSL_ERROR (CPAN RT#103423)
    - Enhanced documentation (https://github.com/noxxi/p5-io-socket-ssl/pull/26)


author: Paul Howarth <paul@city-fan.org> - 2.014-1
changelog:
  - Update to 2.014
    - Utils::CERT_create - work around problems with authorityInfoAccess, where
      OpenSSL i2v does not create the same string as v2i expects
    - Intercept - don't clone some specific extensions that only make sense with
      the original certificate


author: Paul Howarth <paul@city-fan.org> - 2.015-1
changelog:
  - Update to 2.015
    - Work around problem with IO::Socket::INET6 on Windows, by explicitly using
      Domain AF_INET in the tests (CPAN RT#104226)


author: Paul Howarth <paul@city-fan.org> - 2.016-1
changelog:
  - Update to 2.016
    - Add flag X509_V_FLAG_TRUSTED_FIRST by default if available in OpenSSL
      (since 1.02) and available with Net::SSLeay (CPAN RT#104759)
    - Work around hanging prompt() with older perl in Makefile.PL
      (CPAN RT#104731)
    - Make t/memleak_bad_handshake.t work on cygwin and other systems having
      /proc/pid/statm (CPAN RT#104659)
    - Add better debugging


author: Paul Howarth <paul@city-fan.org> - 2.018-1
changelog:
  - Update to 2.018
    - Checks for readability of files/dirs for certificates and CA no longer use
      -r because this is not safe when ACLs are used (CPAN RT#106295)
    - New method sock_certificate similar to peer_certificate (CPAN RT#105733)
    - get_fingerprint can now take optional certificate as argument and compute
      the fingerprint of it; useful in connection with sock_certificate
    - Check for both EWOULDBLOCK and EAGAIN since these codes are different on
      some platforms (CPAN RT#106573)
    - Enforce default verification scheme if nothing was specified, i.e. no
      longer just warn but accept; if really no verification is wanted, a scheme
      of 'none' must be explicitly specified
    - Support different cipher suites per SNI hosts
    - startssl.t failed on darwin with old openssl since server requested client
      certificate but offered also anon ciphers (CPAN RT#106687)
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.019-1
changelog:
  - Update to 2.019
    - Work around different behavior of getnameinfo from Socket and Socket6 by
      using a different wrapper depending on which module is used for IPv6
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.020-1
changelog:
  - Update to 2.020
    - Support multiple directories in SSL_ca_path (CPAN RT#106711); directories
      can be given as array or as string with a path separator
    - Typos fixed (https://github.com/noxxi/p5-io-socket-ssl/pull/34)
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.021-1
changelog:
  - Update to 2.021
    - Fixes for documentation and typos
    - Update PublicSuffix with latest version from publicsuffix.org
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.022-1
changelog:
  - Update to 2.022
    - Fix stringification of IPv6 inside subjectAltNames in Utils::CERT_asHash
      (CPAN RT#110253)


author: Paul Howarth <paul@city-fan.org> - 2.023-1
changelog:
  - Update to 2.023
    - OpenSSL 1.0.2f changed the behavior of SSL shutdown in case the TLS
      connection was not fully established, which somehow resulted in
      Net::SSLeay::shutdown returning 0 (i.e. keep trying) and hence an endless
      loop; it will now ignore this result in case the TLS connection was not
      yet established and consider the TLS connection closed instead
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.024-1
changelog:
  - Update to 2.024
    - Work around issue where the connect fails on systems having only a loopback
      interface and where IO::Socket::IP is used as super class (default when
      available)
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.025-1
changelog:
  - Update to 2.025
    - Resolved memleak if SSL_crl_file was used (CPAN RT#113257, CPAN RT#113530)
  - Simplify find command using -delete


author: Paul Howarth <paul@city-fan.org> - 2.026-1
changelog:
  - Update to 2.026
    - Upstream's default cipher lists updated (we use system default though)
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.029-1
changelog:
  - Update to 2.029
    - Add del_session method to session cache
    - Use SSL_session_key as the real key for the cache and not some derivate of
      it, so that it works to remove the entry using the same key
  - BR: perl-generators


author: Paul Howarth <paul@city-fan.org> - 2.031-1
changelog:
  - Update to 2.031
    - Utils::CERT_create - don't add given extensions again if they were already
      added; Firefox croaks with sec_error_extension_value_invalid if (specific?)
      extensions are given twice
    - Assume that Net::SSLeay::P_PKCS12_load_file will return the CA certificates
      with the reverse order as in the PKCS12 file, because that's what it does
    - Support for creating ECC keys in Utils once supported by Net::SSLeay
    - Remove internal sub session_cache and access cache directly (faster)
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.032-1
changelog:
  - Update to 2.032
    - Set session id context only on the server side; even if the documentation
      for SSL_CTX_set_session_id_context makes clear that this function is server
      side only, it actually affects handling of session reuse on the client side
      too and can result in error "SSL3_GET_SERVER_HELLO:attempt to reuse session
      in different context" at the client


author: Paul Howarth <paul@city-fan.org> - 2.033-1
changelog:
  - Update to 2.033
    - Support for session ticket reuse over multiple contexts and processes (if
      supported by Net::SSLeay)
    - Small optimizations, like saving various Net::SSLeay constants into
      variables and access variables instead of calling the constant sub all the
      time
    - Make t/dhe.t work with openssl 1.1.0
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.034-1
changelog:
  - Update to 2.034
    - Move handling of global SSL arguments into creation of context, so that
      these get also applied when creating a context only
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.035-1
changelog:
  - Update to 2.035
    - Fixes for issues introduced in 2.034
      - Return with error in configure_SSL if context creation failed; this
        might otherwise result in a segmentation fault later
      - Apply builtin defaults before any (user configurable) global settings
        (i.e. done with set_defaults, set_default_context...) so that builtins
        don't replace user settings
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.037-1
changelog:
  - Update to 2.037
    - Disable OCSP support when Net::SSLeay 1.75..1.77 is used (CPAN RT#116795)
    - Fix session cache del_session: it freed the session but did not properly
      remove it from the cache; further reuse caused crash
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.038-1
changelog:
  - Update to 2.038
    - Restrict session ticket callback to Net::SSLeay 1.79+ since version before
      contains bug; add test for session reuse
    - Extend SSL fingerprint to pubkey digest, i.e. 'sha1$pub$xxxxxx....'
    - Fix t/external/ocsp.t to use different server (under my control) to check
      OCSP stapling
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.039-1
changelog:
  - Update to 2.039
    - OpenSSL 1.1.0c changed the behavior of SSL_read so that it now returns -1
      on EOF without proper SSL shutdown; since it looks like that this behavior
      will be kept at least for 1.1.1+, adapt to the changed API by treating
      errno=NOERR on SSL_ERROR_SYSCALL as EOF
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.040-1
changelog:
  - Update to 2.040
    - Fix detection of default CA path for OpenSSL 1.1.x
    - Utils::CERT_asHash now includes the signature algorithm used
    - Utils::CERT_asHash can now deal with large serial numbers
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.041-1
changelog:
  - Update to 2.041
    - Leave session ticket callback off for now until the needed patch is
      included in Net::SSLeay (see
      https://rt.cpan.org/Ticket/Display.html?id=116118#txn-1696146)
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.043-1
changelog:
  - Update to 2.043
    - Enable session ticket callback with Net::SSLeay ≥ 1.80
    - Make t/session_ticket.t work with OpenSSL 1.1.0; with this version the
      session no longer gets reused if it was not properly closed, which is now
      done using an explicit close by the client
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.044-1
changelog:
  - Update to 2.044
    - Protect various 'eval'-based capability detections at startup with a
      localized __DIE__ handler; this way, dynamically requiring IO::Socket::SSL
      as done by various third party software should cause less problems even if
      there is a global __DIE__ handler that does not properly deal with 'eval'
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.045-1
changelog:
  - Update to 2.045
    - Fixed memory leak caused by not destroying CREATED_IN_THIS_THREAD for SSL
      objects (GH#55)
    - Optimization: don't track SSL objects and CTX in *CREATED_IN_THIS_THREAD if
      perl is compiled without thread support
    - Small fix in t/protocol_version.t to use older versions of Net::SSLeay with
      openssl build without SSLv3 support
    - When setting SSL_keepSocketOnError to true the socket will not be closed on
      fatal error (GH#53, modified)
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.046-1
changelog:
  - Update to 2.046
    - Clean up everything in DESTROY and make sure to start with a fresh
      %{*self} in configure_SSL because it can happen that a GLOB gets used
      again without calling DESTROY
      (https://github.com/noxxi/p5-io-socket-ssl/issues/56)
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.047-1
changelog:
  - Update to 2.047
    - Better fix for problem which 2.046 tried to fix but broke LWP that way
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 2.048-1
changelog:
  - Update to 2.048
    - Fixed small memory leaks during destruction of socket and context
      (CPAN RT#120643)
  - Drop support for EOL distributions prior to F-13
    - Drop BuildRoot: and Group: tags
    - Drop explicit buildroot cleaning in %install section
    - Drop explicit %clean section


author: Paul Howarth <paul@city-fan.org> - 2.049-1
changelog:
  - Update to 2.049
    - Fixed problem caused by typo in the context of session cache (GH#60)
    - Updated PublicSuffix information from publicsuffix.org


author: Paul Howarth <paul@city-fan.org> - 2.050-1
changelog:
  - Update to 2.050
    - Removed unnecessary settings of SSL_version and SSL_cipher_list from tests
    - protocol_version.t can now deal when TLS 1.0 and/or TLS 1.1 are not
      supported, as is the case with openssl versions in latest Debian (buster)


author: Paul Howarth <paul@city-fan.org> - 2.051-1
changelog:
  - Update to 2.051
    - syswrite: If SSL_write sets SSL_ERROR_SYSCALL but not $! (as seen with
      OpenSSL 1.1.0 on Windows), set $! to EPIPE to propagate a useful error up
      (GH#62)


author: Paul Howarth <paul@city-fan.org> - 2.052-1
changelog:
  - Update to 2.052
    - Disable NPN support if LibreSSL ≥ 2.6.1 is detected since they've replaced
      the functions with dummies instead of removing NPN completly or setting
      OPENSSL_NO_NEXTPROTONEG
    - t/01loadmodule.t shows more output helpful in debugging problems
    - Update fingerprints for external tests
    - Update documentation to make behavior of syswrite more clear


author: Paul Howarth <paul@city-fan.org> - 2.054-1
changelog:
  - Update to 2.054
    - Small behavior fixes
      - If SSL_fingerprint is used and matches, don't check for OCSP
      - Utils::CERT_create: Small fixes to properly specific purpose, ability to
        use predefined complex purpose but disable some features
    - Update PublicSuffix
    - Updates for documentation, especially regarding pitfalls with forking or
      using non-blocking sockets, spelling fixes
    - Test fixes and improvements
      - Stability improvements for live tests
      - Regenerate certificates in certs/ and make sure they are limited to the
        correct purpose; check in program used to generate certificates
      - Adjust tests since certificates have changed and some tests used
        certificates intended for client authentication as server certificates,
        which now no longer works


author: Paul Howarth <paul@city-fan.org> - 2.055-1
changelog:
  - Update to 2.055
    - Use SNI also if hostname was given all-uppercase
    - Utils::CERT_create: Don't add authority key for issuer since Chrome does
      not like this
    - Intercept:
      - Change behavior of code-based cache to better support synchronizing
        within multiprocess/threaded set-ups
      - Don't use counter for serial number but somehow base it on original
        certificate in order to avoid conflicts with reuse of serial numbers
        after restart
    - Better support platforms without IPv6 (CPAN RT#124431)
    - Spelling fixes in documentation (CPAN RT#124306)


author: Paul Howarth <paul@city-fan.org> - 2.056-1
changelog:
  - Update to 2.056
    - Intercept: Fix creation of serial number (basing it on binary digest
      instead of treating hex fingerprint as binary), allow use of own serial
      numbers again
    - t/io-socket-ip.t: Skip test if no IPv6 support on system (CPAN RT#124464)
    - Update PublicSuffix


author: Paul Howarth <paul@city-fan.org> - 2.058-1
changelog:
  - Update to 2.058
    - Fix memory leak that occurred with explicit stop_SSL in connection with
      non-blocking sockets or timeout (CPAN RT#125867)
    - Fix redefine warnings in case Socket6 is installed but neither
      IO::Socket::IP nor IO::Socket::INET6 (CPAN RT#124963)
    - IO::Socket::SSL::Intercept - optional 'serial' argument can be starting
      number or callback to create serial number based on the original certificate
    - New function get_session_reused to check if a session got reused
    - IO::Socket::SSL::Utils::CERT_asHash: fingerprint_xxx now set to the correct
      value
    - Fix t/session_ticket.t: It failed with OpenSSL 1.1.* since this version
      expects the extKeyUsage of clientAuth in the client cert also to be allowed
      by the CA if CA uses extKeyUsage


author: Paul Howarth <paul@city-fan.org> - 2.059-1
changelog:
  - Update to 2.059 (bug #1610017)
    - Fix memory leak when CRLs are used (CPAN RT#125867)
    - Fix memory leak when using stop_SSL and threads
      (https://rt.cpan.org/Ticket/Display.html?id=125867#txn-1797132)


author: Petr Pisar <ppisar@redhat.com> - 2.059-2
changelog:
  - Adapt to OpenSSL 1.1.1, it requires patched Net-SSLeay (bug #1610017)
  - Enable tests (bug #1610017)


author: Paul Howarth <paul@city-fan.org> - 2.060-1
changelog:
  - Update to 2.060 (bug #1610017)
    - Support for TLS 1.3 with OpenSSL 1.1.1 (needs Net::SSLeay ≥ 1.86); see
      also CPAN RT#126899
    - TLS 1.3 support is not complete yet for session reuse


author: Petr Pisar <ppisar@redhat.com> - 2.060-3
changelog:
  - Client sends a post-handshake-authentication extension if a client key and
    a certificate are available (bug #1633636)


author: Paul Howarth <paul@city-fan.org> - 1:0.96-1
changelog:
  - Update to 0.96
    - Require Module::Load::Conditional 0.66 to resolve CVE-2016-1238
      (avoid loading optional modules from default .)
  - Update patch for use of ExtUtils::MM::Utils
  - Simplify find command using -delete


author: Paul Howarth <paul@city-fan.org> - 1:0.98-1
changelog:
  - Update to 0.98
    - Added wait_loop_callback for run_forked()
    - Only search in curdir in can_run() when on Win32 (CPAN RT#105601)
  - Drop redundant Group: tag


author: Paul Howarth <paul@city-fan.org> - 1.25-12
changelog:
  - Drop EL-5 support
    - Drop BuildRoot: and Group: tags
    - Drop explicit buildroot cleaning in %install section
    - Drop explicit %clean section
  - Introduce build-condition for optional tests
  - Use %license where possible
  - Simplify find command using -delete
  - Classify buildreqs by usage


author: Paul Howarth <paul@city-fan.org> - 2.97-1
changelog:
  - Update to 2.97 (upstream 2.97000 but stick to two-digit minor version
    downstream in case upstream changes back before version 3.x)


author: Paul Howarth <paul@city-fan.org> - 2.27400-1
changelog:
  - Update to 2.27400
    - Applied and merged long term neglected patches and pull requests
    - Modified Makefile.PL to set UNINST=1 if needed on old perls
    - Decode decimals to Perl's internal NV type
  - Simplify find command using -delete


author: Paul Howarth <paul@city-fan.org> - 2.93000-1
changelog:
  - Update to 2.93
    - Changed the number detection logic (experimental)
    - Correct 0 handling (GH#23)
    - Removed base.pm dependency (GH#5)
    - Fixed wrong character offset (CPAN RT#116998)
    - Address VAX issues (CPAN RT#118469)
    - Various documentation fixes
    - Remove . in @INC in json_pp (GH#25, CVE-2016-1238)
    - Removed $VAR1 from json_pp output (GH#11)
    - Fixed an issue to ignore trailing 0 (GH#29)
    - Added Scalar::Util dependency for Perl 5.8+ (CPAN RT#84347)
    - Fixed issues spotted by Nicolas Seriot's JSON Test Suite including
      experimental UTF-16/32 support and backward incompatible change of
      C style comment handling (now disabled by default) (GH#28)
    - Moved the guts of JSON::PP::Boolean into lib/JSON/PP/Boolean.pm and gave
      it a proper version
    - Refactored incremental parser to let it handle incomplete JSON text
      properly
    - Imported and tweaked tests from JSON.pm
    - Minor code clean up
    - Fixed not to fail tests under Perl 5.25.* (CPAN RT#119114)
    - Reworked documentation, based on the one for JSON::XS
    - Let json_pp utility show the version of JSON::PP
    - Fix loading order of B module (GH#31)
    - Fixed isa tests for bignum
  - This release by ISHIGAKI → update source URL
  - Use five-digit version number for rpm to maintain upgrade path
  - Drop EL-5 support
    - Drop BuildRoot: and Group: tags
    - Drop explicit buildroot cleaning in %install section
    - Drop explicit %clean section


author: Paul Howarth <paul@city-fan.org> - 1:2.96-1
changelog:
  - Update to 2.96
    - json_pp now prints an encoded json string (CPAN RT#123653)
    - Fix is_bool to use ->isa("JSON::PP::Boolean"), instead of
      UNIVERSAL::isa("JSON::PP::Boolean") (GH#34)
    - Avoid use of newer Test::More features (CPAN RT#122421)


author: Paul Howarth <paul@city-fan.org> - 1:2.97-1
changelog:
  - Update to 2.97000
    - Fix is_bool to use blessed() instead of ref()
    - Use 5 digit minor version number for a while to avoid confusion (GH#33)
  - Stick to 2 digit minor version downstream as we already bumped epoch


author: Paul Howarth <paul@city-fan.org> - 1:2.97.001-1
changelog:
  - Update to 2.97001
    - Tweak internal number detector always to consider a flagged value as a
      string (GH#35)
    - Clarify json_pp options (CPAN RT#123766)


author: Petr Pisar <ppisar@redhat.com> - 1:0.65-13
changelog:
  - Correct misspellings in Net::LDAP::FAQ
  - Perform tests against a server
  - Net::LDAP::DSML moved to perl-Net-LDAP-DSML package due to XML dependencies


author: Petr Pisar <ppisar@redhat.com> - 1:0.66-7
changelog:
  - Fix tests subpackage test script (bug #1663063)
  - Fix a shell bang in a certificate generator script (bug #1663063)


author: Petr Pisar <ppisar@redhat.com> - 6.06-2
changelog:
  - Fix CVE-2014-3230 (incorrect handling of SSL certificate verification if
    HTTPS_CA_DIR or HTTPS_CA_FILE environment variables are set) (bug #1094442)


author: Paul Howarth <paul@city-fan.org> - 0.13-1
changelog:
  - Update to 0.13
    - Don't run pod tests on user installs
    - Stop using Module::Install to fix installation when @INC doesn't have the
      current directory (CPAN RT#119016)
    - Repository migrated to the github moose organization
  - This release by HAARG → update source URL
  - Simplify find command using -delete


author: Paul Howarth <paul@city-fan.org> - 2.17-1
changelog:
  - Update to 2.17
    - Mail::Header should only accept totally empty lines as header terminator,
      not to break MIME::Tools regression tests (CPAN RT#113918)


author: Jitka Plesnikova <jplesnik@redhat.com> - 2.18-1
changelog:
  - Update to 2.18
    - Mail::Header should accept \r in empty line which ends the
      header (CPAN RT#114382)


author: Paul Howarth <paul@city-fan.org> - 2.19-1
changelog:
  - Update to 2.19
    - Block namespace MailTools (CPAN RT#120905)
  - Add "ancient" to %summary and %description
  - Drop EL-5 support
    - Drop BuildRoot: and Group: tags
    - Drop explicit buildroot cleaning in %install section
    - Drop explicit %clean section


author: Paul Howarth <paul@city-fan.org> - 2.20-1
changelog:
  - Update to 2.20
    - Rewrite doc syntax to my current standard style
    - Text corrections (CPAN RT#123823, CPAN RT#123824)
    - Convert to git
    - Move to GitHub


author: Jitka Plesnikova <jplesnik@redhat.com> - 1:1.9998.11-6
changelog:
  - Document Math::BigInt::CalcEmu requires Math::BigInt (bug #1689912) 
    - Petr Pisar <ppisar@redhat.com>
  - Rebuild with enable hardening (bug #1636329)


author: Paul Howarth <paul@city-fan.org> - 0.66-1
changelog:
  - Update to 0.66
    - Add FORCE_SAFE_INC option to address CVE-2016-1238
  - BR: perl-generators
  - Simplify find command using -delete
  - Drop legacy Group: tag


author: Jitka Plesnikova <jplesnik@redhat.com> - 1.000031-1
changelog:
  - 1.000031 bump; Used trial version to compete with Perl 5.24
    - Refactor and expand test cases
    - Fix a $VERSION extraction issue on perl 5.6.2 (CPAN RT#105978, PR#17)
    - Fix the detection of package Foo when $Foo::VERSION is set (CPAN RT#85961)
    - Fix missing "use" statement in refactored test helper (only affected older
      perls, due to other module interactions)
    - Temporary directories cleaned up during tests
    - More accurately mark tests as TODO, so as to have a quieter and less
      confusing test run without passing TODO tests
    - Be less noisy on failure when building as part of perl core (see
      Perl RT#126685)


author: Paul Howarth <paul@city-fan.org> - 1.000033-1
changelog:
  - Update to 1.000033
    - Use a more strict matching heuristic when attempting to infer the "primary"
      module name in a parsed .pm file
    - Only report "main" as the module name if code was seen outside another
      namespace, fixing bad results for pod files (CPAN RT#107525)
    - Fix file operation in tests for VMS
  - BR: perl-generators
  - Simplify find command using -delete


author: Nick Bebout <nb@fedoraproject.org> 1.05-2
changelog:
  - Remove HMAC_MD5 from Requires and BuildRequires
  - Add Test::Pod to BuildRequires
  - Add licensing email to docs
  - Use macro for version


author: Ville Skyttä <ville.skytta at iki.fi> - 0:1.25-0.fdr.4
changelog:
  - Rename to perl-Net-SSLeay, provide perl-Net_SSLeay for compatibility
    with the rest of the world.


author: Ville Skyttä <ville.skytta at iki.fi> - 0:1.26-0.fdr.1
changelog:
  - Update to unofficial 1.26 from Peter Behroozi, adds get1_session(),
    enables session caching with IO::Socket::SSL (bug 1859, bug 1860).
  - Bring outdated test14 up to date (bug 1859, test suite still not enabled).


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 1.30-2
changelog:
  - CVE-2005-0106: patch from Mandriva
    http://wwwnew.mandriva.com/security/advisories?name=MDKSA-2006:023


author: Paul Howarth <paul@city-fan.org> - 1.32-1
changelog:
  - update to 1.32, incorporate new upstream URLs
  - cosmetic spec changes suiting new maintainer's preferences
  - fix argument order for find with -depth
  - remove patch for CVE-2005-0106, fixed upstream in 1.30 (#191351)
    (http://rt.cpan.org/Public/Bug/Display.html?id=19218)
  - remove test patch, no longer needed
  - re-encode Credits as UTF-8
  - include TODO as %doc
  - add buildreqs perl(Array::Compare), perl(MIME::Base64), perl(Sub::Uplevel),
    perl(Test::Exception), perl(Test::NoWarnings), perl(Test::Pod),
    perl(Test::Warn), perl(Tree::DAG_Node)
  - add patch needed to disable testsuite non-interactively
  - run test suite but disable external tests by default; external tests can be
    enabled by using rpmbuild --with externaltests
  - add patch to change hosts connected to in external tests


author: Paul Howarth <paul@city-fan.org> - 1.35-1
changelog:
  - update to 1.35
  - drop flag and patch for enabling/disabling external tests - patch now upstream
  - external hosts patch no longer needed as we don't do external tests
  - filter out unversioned provide for perl(Net::SSLeay)
  - use the distro openssl flags rather than guessing them


author: Paul Howarth <paul@city-fan.org> - 1.35-7
changelog:
  - update to svn trunk (rev 252), needed due to omission of MD2 functionality
    from OpenSSL 1.0.0 (CPAN RT#48916)


author: Paul Howarth <paul@city-fan.org> - 1.36-6
changelog:
  - BR: perl(Test::Kwalitee) if we're not bootstrapping
  - explicitly BR: pkgconfig
  - use a patch rather than a scripted iconv to fix the character encoding
  - modernize provides filter
  - stop running the tests in verbose mode
  - nobody else likes macros for commands


author: Paul Howarth <paul@city-fan.org> - 1.37-1
changelog:
  - update to 1.37
    - added X509_get_fingerprint
    - added support for SSL_CTX_set1_param, SSL_set1_param and selected
      X509_VERIFY_PARAM_* OBJ_* functions
    - fixed the prototype for randomize()
    - fixed an uninitialized value warning in $Net::SSLeay::proxyauth
    - allow net-ssleay to compile if SSLV2 is not present
    - fixed a problem where sslcat (and possibly other functions) expect RSA
      keys and will not load DSA keys for client certificates
    - removed SSL_CTX_v2_new and SSLv2_method() for OpenSSL 1.0 and later
    - added CTX_use_PKCS12_file
  - this release by MIKEM => update source URL


author: Paul Howarth <paul@city-fan.org> - 1.38-1
changelog:
  - update to 1.38
    - fixed a problem with various symbols that only became available in OpenSSL
      0.9.8 such as X509_VERIFY_PARAM and X509_POLICY_NODE, causing build
      failures with older versions of OpenSSL (CPAN RT#71013)


author: Paul Howarth <paul@city-fan.org> - 1.39-1
changelog:
  - update to 1.39
    - downgraded Module::Install to 0.93 since 1.01 was causing problems in the
      Makefile


author: Paul Howarth <paul@city-fan.org> - 1.40-1
changelog:
  - update to 1.40
    - fixed incorrect argument type in call to SSL_set1_param
    - fixed a number of issues with pointer sizes; removed redundant pointer cast
      tests from t/
    - added Perl version requirements to SSLeay.pm


author: Paul Howarth <paul@city-fan.org> - 1.41-1
changelog:
  - update to 1.41
    - fixed incorrect const signatures for 1.0 that were causing warnings; now
      have clean compile with 0.9.8a through 1.0.0
  - BR: perl(Carp)


author: Paul Howarth <paul@city-fan.org> - 1.42-1
changelog:
  - update to 1.42
    - fixed incorrect documentation of how to enable CRL checking
    - fixed incorrect letter in Sebastien in Credits
    - changed order of the Changes file to be reverse chronological
    - fixed a compile error when building on Windows with MSVC6
  - drop UTF8 patch, no longer needed


author: Paul Howarth <paul@city-fan.org> - 1.42-2
changelog:
  - use DESTDIR rather than PERL_INSTALL_ROOT
  - use %{_fixperms} macro rather than our own chmod incantation
  - BR: perl(AutoLoader), perl(Exporter), perl(Socket)


author: Paul Howarth <paul@city-fan.org> - 1.45-1
changelog:
  - update to 1.45 (see Changes file for full details)
    - added thread safety and dynamic locking, which should complete thread
      safety work, making Net::SSLeay completely thread-safe
    - lots of improved documentation
  - BR: perl(Test::Pod::Coverage)
  - install Net/SSLeay.pod as %doc


author: Paul Howarth <paul@city-fan.org> - 1.46-1
changelog:
  - update to 1.46 (see Changes file for details)
  - BR: openssl as well as openssl-devel, needed for building
  - no longer need help to find openssl
  - upstream no longer shipping TODO
  - drop %defattr, redundant since rpm 4.4


author: Paul Howarth <paul@city-fan.org> - 1.47-1
changelog:
  - update to 1.47
    - fixed overlong lines and spelling errors in pod
    - fixed extra "garbage" files in 1.46 tarball
    - fixed incorrect fail reports on some 64 bit platforms
    - fix to avoid FAIL reports from cpantesters with missing openssl
    - use my_snprintf from ppport.h to prevent link failures with perl 5.8 and
      earlier when compiled with MSVC


author: Paul Howarth <paul@city-fan.org> - 1.48-1
changelog:
  - update to 1.48
    - removed unneeded Debian_CPANTS.txt from MANIFEST
    - fixed incorrect documentation about the best way to call CTX_set_options
    - fixed problem that caused "Undefined subroutine utf8::encode" in
      t/local/33_x509_create_cert.t (on perl 5.6.2)
    - in examples and pod documentation, changed #!/usr/local/bin/perl
      to #!/usr/bin/perl
    - t/local/06_tcpecho.t now tries a number of ports to bind to until
      successful
  - no longer need to fix shellbangs in examples


author: Paul Howarth <paul@city-fan.org> - 1.49-1
changelog:
  - update to 1.49
    - fixed problem where on some platforms test t/local/07_tcpecho.t would bail
      out if it could not bind port 1212; it now tries a number of ports to bind
      to until successful
    - improvements to unsigned casting
    - improvements to Net::SSLeay::read to make it easier to use with
      non-blocking IO: it modifies Net::SSLeay::read() to return the result from
      SSL_read() as the second return value, if Net::SSLeay::read() is called in
      list context (its behavior should be unchanged if called in scalar or void
      context)
    - fixed a problem where t/local/kwalitee.t fails with
      Module::CPANTS::Analyse 0.86
    - fixed a number of typos
    - fixed a compiler warning from Compiling with gcc-4.4 and -Wall
    - Fixed problems with get_https4: documentation was wrong, $header_ref was
      not correctly set and $server_cert was not returned
    - fixed a problem that could cause a Perl exception about no blength method
      on undef (CPAN RT#79309)
    - added documentation about how to mitigate various SSL/TLS vulnerabilities
    - SSL_MODE_* are now available as constants
  - drop upstreamed pod encoding patch


author: Paul Howarth <paul@city-fan.org> - 1.50-1
changelog:
  - update to 1.50
    - fixed a problem where t/handle/external/50_external.t would crash if any of
      the test sites were not contactable
    - now builds on VMS, added README.VMS
    - fixed a few compiler warnings in SSLeay.xs; most of them are just
      signed/unsigned pointer mismatches but there is one that actually fixes
      returning what would be an arbitrary value off the stack from
      get_my_thread_id if it happened to be called in a non-threaded build
    - added SSL_set_tlsext_host_name, SSL_get_servername, SSL_get_servername_type,
      SSL_CTX_set_tlsext_servername_callback for server side Server Name
      Indication (SNI) support
    - fixed a problem with C++ comments preventing builds on AIX and HPUX
    - perdition.org not available for tests, changed to www.open.com.au
    - added SSL_FIPS_mode_set
    - improvements to test suite so it succeeds with and without FIPS mode
      enabled
    - added documentation, warning not to pass UTF-8 data in the content
      argument to post_https


author: Paul Howarth <paul@city-fan.org> - 1.51-1
changelog:
  - update to 1.51
    - fixed a problem where SSL_set_SSL_CTX is not available with
      OpenSSL < 0.9.8f (CPAN RT#81940)
  - fix bogus date in spec changelog


author: Paul Howarth <paul@city-fan.org> - 1.52-1
changelog:
  - update to 1.52
    - rebuild package with gnu format tar, to prevent problems with unpacking on
      other systems such as old Solaris


author: Paul Howarth <paul@city-fan.org> - 1.54-1
changelog:
  - update to 1.54
    - added support for SSL_export_keying_material where present (i.e. in OpenSSL
      1.0.1 and later)
    - changed t/handle/external/50_external.t to use www.airspayce.com instead of
      perldition.org, who no longer have an https server
    - patch to fix a crash: P_X509_get_crl_distribution_points on an X509
      certificate with values in the CDP extension that do not have an ia5 string
      would cause a segmentation fault when accessed
    - change in t/local/32_x509_get_cert_info.t to not use
      Net::SSLeay::ASN1_INTEGER_get, since it works differently on 32 and 64 bit
      platforms
    - updated author and distribution location details to airspayce.com
    - improvement to test 07_sslecho.t so that if set_cert_and_key fails we can
      tell why


author: Paul Howarth <paul@city-fan.org> - 1.55-1
changelog:
  - update to 1.55
    - added support for TLSV1_1 and TLSV1_2 methods with SSL_CTX_tlsv1_1_new(),
      SSL_CTX_tlsv1_2_new(), TLSv1_1_method() and TLSv1_2_method(), where
      available in the underlying openssl
    - added CRL support functions X509_CRL_get_ext(), X509_CRL_get_ext_by_NID(),
      X509_CRL_get_ext_count()
    - fixed a problem that could cause content with a value of '0' to be
      incorrectly encoded by do_httpx3 and friends (CPAN RT#85417)
    - added support for SSL_get_tlsa_record_byname() required for DANE support in
      openssl-1.0.2 and later
    - testing with openssl-1.0.2-stable-SNAP-20130521
    - added X509_NAME_new and X509_NAME_hash


author: Paul Howarth <paul@city-fan.org> - 1.56-1
changelog:
  - Update to 1.56
    - Fixed a typo in documentation of BEAST Attack
    - Added LICENSE file copied from OpenSSL distribution to prevent complaints
      from various versions of kwalitee
    - Adjusted license: in META.yml to be 'openssl'
    - Adds support for the basic operations necessary to support ECDH for PFS,
      e.g. EC_KEY_new_by_curve_name, EC_KEY_free and SSL_CTX_set_tmp_ecdh
    - Improvements to t/handle/external/50_external.t to handle the case when a
      test connection was not possible
    - Added support for ALPN TLS extension
    - Fixed a use-after-free error
    - Fixed a problem with invalid comparison on OBJ_cmp result in
      t/local/36_verify.t
    - Added support for get_peer_cert_chain()
    - Fixed a bug that could cause stack faults: mixed up PUTBACK with SPAGAIN in
      ssleay_RSA_generate_key_cb_invoke(); a final PUTBACK is needed here
    - Fixed cb->data checks and wrong refcounts on &PL_sv_undef
    - Deleted support for SSL_get_tlsa_record_byname: it is not included in
      OpenSSL git master
  - Drop upstreamed patch for CPAN RT#91215
  - Skip the Pod Coverage test, as there are naked subroutines in this release
  - ECC support not available in Fedora/EL until OpenSSL 1.0.1e, so patch the
    source accordingly to fix builds for F-12 .. F-17


author: Paul Howarth <paul@city-fan.org> - 1.57-1
changelog:
  - Update to 1.57
    - Fixed remaining problems with test suite: pod coverage and kwalitee tests
      are only enabled with RELEASE_TESTING=1


author: Paul Howarth <paul@city-fan.org> - 1.58-1
changelog:
  - Update to 1.58
    - Always use size_t for strlen() return value
    - t/external/20_cert_chain.t was missing from dist
    - Version number in META.yml was incorrect
    - Improvements to test t/external/20_cert_chain.t to provoke following bug:
      fixed crash due to SSL_get_peer_cert_chain incorrectly free'ing the chain
      after use
    - Fixed a problem when compiling against openssl where OPENSSL_NO_EC is set
  - Drop Fedora/EL ECC support patch, no longer needed


author: Paul Howarth <paul@city-fan.org> - 1.59-1
changelog:
  - Update to 1.59
    - Fixed local/30_error.t so that tests do not fail if diagnostics are enabled
    - Fixed error messages about undefined strings used with length or split
    - Improvements to configuration of OPTIMIZE flags, to prevent overriding of
      perl's expected optimization flags
    - SSL_peek() now returns openssl error code as second item when called in
      array context, same as SSL_read
    - Fixed some warnings
    - Added support for tlsv1.1 tlsv1.2 via $Net::SSLeay::ssl_version
    - Improve examples in 'Using other perl modules based on Net::SSLeay'
    - Added support for OCSP
    - Added missing t/external/ocsp.t
  - Add patch to stop gcc complaining about format string usage


author: Paul Howarth <paul@city-fan.org> - 1.61-1
changelog:
  - Update to 1.61
    - Fixed a typo in an error message
    - Fixed a problem with building with openssl that does not support OCSP
    - Fixed some newly introduced warnings if compiled with -Wall
    - Fixed format string issue causing build failures
    - Changed calloc to Newx and free to Safefree, otherwise there might be
      problems because calloc is done from a different memory pool than free
      (depends on the build options for perl, but seen on Windows)


author: Paul Howarth <paul@city-fan.org> - 1.63-1
changelog:
  - Update to 1.63
    - Improvements to OCSP support: it turns out that some CAs (like Verisign)
      sign the OCSP response with the CA we have in the trust store and don't
      attach this certifcate in the response, but OpenSSL by itself only
      considers the certificates included in the response and
      SSL_OCSP_response_verify added the certificates in the chain too, so now
      we also add the trusted CA from the store which signed the lowest chain
      certificate, at least if we could not verify the OCSP response without
      doing it
    - Fixed some compiler warnings
  - BR: perl(HTTP::Tiny) for test suite


author: Paul Howarth <paul@city-fan.org> - 1.64-1
changelog:
  - Update to 1.64
    - Test ocsp.t now does not fail if HTTP::Tiny is not installed
    - Fixed repository in META.yml
    - Fixed a problem with SSL_get_peer_cert_chain: if the SSL handshake results
      in an anonymous authentication, like ADH-DES-CBC3-SHA, get_peer_cert_chain
      will not return an empty list, but instead return the SSL object
    - Fixed a problem where patch
      https://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=3009244d
      caused a failed test in t/local/33_x509_create_cert.t


author: Paul Howarth <paul@city-fan.org> - 1.65-1
changelog:
  - Update to 1.65
    - Added note to docs to make it clear that X509_get_subjectAltNames returns a
      packed binary IP address for type 7 - GEN_IPADD
    - Improvements to SSL_OCSP_response_verify to compile under non-c99 compilers
    - Port to Android, includes Android-specific version of RSA_generate_key
    - Added LibreSSL support
    - Patch that fixes the support for SSL_set_info_callback and adds
      SSL_CTX_set_info_callback and SSL_set_state; support for these functions is
      necessary to either detect renegotiation or to enforce renegotiation
    - Fixed a problem with SSL_set_state not available on some early OpenSSLs
    - Removed arbitrary size limits from calls to tcp_read_all in tcpcat() and
      http_cat()
    - Removed unnecessary Debian_CPANTS.txt from MANIFEST - again


author: Paul Howarth <paul@city-fan.org> - 1.66-1
changelog:
  - Update to 1.66
    - Fixed compile problem with perl prior to 5.8.8, similar to CPAN RT#76267
    - Fixed a problem with Socket::IPPROTO_TCP on early perls
    - After discussions with the community and the original author Sampo
      Kellomaki, the license conditions have been changed to "Perl Artistic
      License 2.0"
  - License changed to Artistic 2.0
  - Use %license where possible


author: Paul Howarth <paul@city-fan.org> - 1.68-1
changelog:
  - Update to 1.68
    - Improvements to inc/Module/Install/PRIVATE/Net/SSLeay.pm to handle the case
      where there are muliple OPENSSLs installed
    - Fixed a documentation error in get_peer_cert_chain
    - Fixed a problem with building on Windows that prevented correct OpenSSL
      directory detection with version 1.0.1j as delivered with Shining Light
      OpenSSL
    - Fixed a problem with building on Windows that prevented finding MT or MD
      versions of SSL libraries
    - Updated doc in README.Win32 to build with Microsoft Visual Studio 2010
      Express
    - Added Windows crypt32 library to Windows linking as some
      compilers/platforms seem to require it and it is innocuous otherwise
    - Fixed a failure in t/external/20_cert_chain.t where some platforms do not
      have HTTPS in /etc/services
    - Recent 1.0.2 betas have dropped the SSLv3_method function; we leave out
      the function on newer versions, much the same as the SSLv2 deprecation is
      handled
    - Fix the ALPN test, which was incorrectly failing on OpenSSL due to the
      LibreSSL check (earlier versions bailed out before that line)
    - Fixed a problem on OSX when macports openssl 1.x is installed: headers from
      macport were found but older OSX openssl libraries were linked, resulting
      in "Symbol not found: _EVP_MD_do_all_sorted"
    - Added notes about runtime error "no OPENSSL_Applink", when calling
      Net::SSLeay::P_PKCS12_load_file
  - Don't change %{__perl_provides} unless we need to


author: Paul Howarth <paul@city-fan.org> - 1.69-1
changelog:
  - Update to 1.69
    - Testing with OpenSSL 1.0.2, 1.0.2a OK
    - Completed LibreSSL compatibility
    - Improved compatibility with OpenSSL 1.0.2a
    - Added the X509_check_* functions introduced in OpenSSL 1.0.2
    - Added support for X509_V_FLAG_TRUSTED_FIRST constant
    - Allow get_keyblock_size to work correctly with OpenSSL 1.0.1 onwards


author: Paul Howarth <paul@city-fan.org> - 1.70-1
changelog:
  - Update to 1.70
    - The new OpenSSL 1.0.2 X509_check_* functions are not available in current
      LibreSSL, so disable them in SSLeay.xs
    - Fixed a problem with building against OSX homebrew's openssl
    - Removed a test in t/local/33_x509_create_cert.t that fails due to changes
      in 1.0.1n and later


author: Paul Howarth <paul@city-fan.org> - 1.71-1
changelog:
  - Update to 1.71
    - Conditionalize support for MD4, MD5
    - Added support for linking libraries in /usr/local/lib64 for some flavours
      of Linux like RH Tikanga
    - Fixes to X509_check_host, X509_check_ip, SSL_CTX_set_alpn_protos, and
      SSL_set_alpn_protos so they will compile on MSVC and AIX cc
    - Fixed typos in documentation for X509_NAME_new and X509_NAME_hash
    - Version number in META.yml is now quoted
  - Explicitly BR: perl-devel, needed for EXTERN.h


author: Paul Howarth <paul@city-fan.org> - 1.72-1
changelog:
  - Update to 1.72
    - Fixed a problem where SvPVx_nolen was undefined in some versions of perl;
      replaced with SvPV_nolen
    - Fixed a cast warning on Darwin


author: Paul Howarth <paul@city-fan.org> - 1.73-1
changelog:
  - Update to 1.73
    - Added X509_get_X509_PUBKEY
    - Added README.OSX with instructions on how to build for recent OS X
    - Added info about using OPENSSL_PREFIX to README.Win32
    - Added comments in POD about installation documentation
    - Added '/usr/local/opt/openssl/bin/openssl' to Openssl search path for
      latest version of OSX homebrew openssl
  - Simplify find commands using -delete


author: Paul Howarth <paul@city-fan.org> - 1.76-1
changelog:
  - Update to 1.76
    - Compatibility with OpenSSL 1.1, tested with openssl-1.1.0-pre5:
      - Conditionally remove threading locking code, not needed in 1.1
      - Rewrite code that accesses inside X509_ATTRIBUTE struct
      - SSL_CTX_need_tmp_RSA, SSL_CTX_set_tmp_rsa, SSL_CTX_set_tmp_rsa_callback,
        SSL_set_tmp_rsa_callback support not available in 1.1
      - SSL_session_reused is now native
      - SSL_get_keyblock_size modifed to use new API
      - OCSP functions modified to use new API under 1.1
      - SSL_set_state removed with 1.1
      - SSL_get_state and SSL_state are now equivalent and available in all
        versions
      - SSL_CTX_v2_new removed
      - SESSION_set_master_key removed with 1.1; code that previously used
        SESSION_set_master_key must now set $secret in the session_secret
        callback set with SSL_set_session_secret_cb
      - With 1.1, $secret in the session_secret callback set with
        SSL_set_session_secret_cb can be changed to alter the master key
        (required by EAP-FAST)
    - Added a function EC_KEY_generate_key similar to RSA_generate_key and a
      function EVP_PKEY_assign_EC_KEY similar to EVP_PKEY_assign_RSA; using
      these functions it is easy to create and use EC keys in the same way as RSA
      keys
    - Testing with LibreSSL 2.4.1
    - Provide support for cross context (and cross process) session sharing using
      the stateless TLS session tickets
    - Added documentation about downloading latest version from SVN
    - Added missing Module/install files to SVN


author: Paul Howarth <paul@city-fan.org> - 1.79-1
changelog:
  - Update to 1.79
    - Patch to fix a few inline variable declarations that cause errors for older
      compilers
    - Patch: Generated C code is not compatible with MSVC, AIX cc, probably
      others; added some PREINIT blocks and replaced 2 cases of INIT with PREINIT
    - Fix compile failure if the OpenSSL library it's built against has
      compression support compiled out
    - Added RSA_get_key_parameters() to return a list of pointers to RSA key
      internals (only available prior to OpenSSL 1.1)
    - Fix some documentation typos
    - Testing with openssl-1.1.0b


author: Paul Howarth <paul@city-fan.org> - 1.80-1
changelog:
  - Update to 1.80
    - Fix unexpected changes in the control flow of the Perl program that seemed
      to be triggered by the ticket key callback


author: Paul Howarth <paul@city-fan.org> - 1.81-1
changelog:
  - Update to 1.81
    - Enable RSA_get_key_parameters with LibreSSL - again
    - Fixed memory leak in X509_get_subjectAltNames
    - Added . to lib path in Makefile.PL to accommodate people who are using a
      perl with -Ddefault_inc_excludes_dot
    - Fixed build failure if engine support not present
    - Improvements to get_my_thread_id to work around possibility of ERRSV not
      being defined, e.g. on OpenWRT


author: Paul Howarth <paul@city-fan.org> - 1.82-1
changelog:
  - Update to 1.82
    - Added support for building under Linuxbrew (a linuxbrew version of MacOS
      Homebrew)
    - Implement SSL_CTX_set_psk_client_callback() and
      SSL_set_psk_client_callback()
    - Skip the NPN test if the SSL library is LibreSSL
    - Fixed a problem with a variable declaration in
      ssleay_session_secret_cb_invoke
    - Bugfix: tlsext_status_cb_invoke(...): free ocsp_response only when
      allocated; the same callback is used on a server side for OCSP stapling
      and in that case ocsp_response is NULL and not used
    - New feature: Added a binding
      SSL_set_session_ticket_ext_cb(ssl, callback, data); a callback used by
      EAP-FAST/EAP-TEAT to parse and process TLS session ticket
    - New feature: Added a binding SSL_set_session_ticket_ext(ssl, ticket); used
      by EAP-FAST/EAP-TEAP to define TLS session ticket value
    - Bugfix: tlsext_ticket_key_cb_invoke(...): allow SHA256 HMAC key to be 32
      bytes instead of 16 bytes (which OpenSSL will pad with zeros up to 32
      bytes)
    - New feature: Added following bindings:
      - X509_get_ex_data(cert, idx)
      - X509_get_ex_new_index(argl, argp, new_func, dup_func, free_func)
      - X509_get_app_data(cert)
      - X509_set_ex_data(cert, idx, data)
      - X509_set_app_data(cert, arg)
      - X509_STORE_CTX_get_ex_new_index(argl, argp, new_func, dup_func, free_func)
      - X509_STORE_CTX_get_app_data(x509_store_ctx)
      - X509_STORE_CTX_set_app_data(x509_store_ctx, arg)
    - New feature: Added an implementation for
      SSL_get_finished(ssl, buf, count=2*EVP_MAX_MD_SIZE)
    - New feature: Added an implementation for
      SSL_get_peer_finished(ssl, buf, count=2*EVP_MAX_MD_SIZE)
    - Bugfix: SSL_get_keyblock_size(s): Calculate key block size correctly also
      with AEAD ciphers, which don’t use digest functions
    - New feature: Added a binding SSL_set_tlsext_status_ocsp_resp(ssl, staple);
      used by a server side to include OCSP staple in ServerHello
    - Bugfix: SSL_OCSP_response_verify(ssl, rsp, svreq, flags): check that chain
      and last are not NULL before trying to use them
    - Bugfix: inc/Module/Install/PRIVATE/Net/SSLeay.pm: Don’t quote include and
      lib paths
  - Drop EL-5 support
    - Drop BuildRoot: and Group: tags
    - Drop explicit buildroot cleaning in %install section
    - Drop explicit %clean section


author: Paul Howarth <paul@city-fan.org> - 1.83-1
changelog:
  - Update to 1.83
    - Fixed a problem with exporting OPENSSL_NO_NEXTPROTONEG even though they
      are not available on LibreSSL
    - Add support for SSL_set_default_passwd_cb* for OpenSSL 1.1.0f and later;
      LibreSSL does not support these functions, at least yet
    - Add new functions related to SSL_CTX_new
    - Add two new functions introduced in OpenSSL 1.1.0, a number of constants
      and a couple of const qualifiers to SSLeay.xs; tests and documentation .pod
      were also updated
    - Added support for SSL_use_certificate_chain_file function introduced in
      OpenSSL 1.1.0
    - Fixed LibreSSL version detection to correctly parse LibreSSL minor version
    - Fix memory leaks in OCSP handling
    - Add new functions for certificate verification introduced in OpenSSL 1.02,
      a number of constants, new test data files, new tests and updates to .pod
      documentation; the new functions provide access to the built-in wildcard
      check functionality available in OpenSSL 1.0.2 and later
    - Added X509_STORE_CTX_new and X509_verify_cert
    - SSL_OCSP_response_verify now clears the error queue if OCSP_basic_verify
      fails but the intermediate certificate succeeds


author: Paul Howarth <paul@city-fan.org> - 1.84-1
changelog:
  - Update to 1.84
    - Fixed an error in t/local/04_basic.t causing a test failure if
      Test::Exception not installed


author: Paul Howarth <paul@city-fan.org> - 1.85-1
changelog:
  - Update to 1.85
    - Preparations for transferring maintenace to a new maintainer
    - Fixed test failure in t/local/33_x509_create_cert.t for some versions of
      OpenSSL
    - Fixed free() error that causes "Free to wrong pool ..." message on Windows


author: Petr Pisar <ppisar@redhat.com> - 1.85-3
changelog:
  - Adapt to OpenSSL 1.1.1 (bug #1610376)
  - Adapt tests to system-wide crypto policy (bug #1610376)
  - Adapt tests to security level 2 system-wide crypt policy (bug #1610376)


author: Petr Pisar <ppisar@redhat.com> - 1.85-5
changelog:
  - Revert retry in Net::SSLeay::{read,write}() (bug #1610376)
  - Revert retry in Net::SSLeay::write_partial() (bug #1610376)


author: Petr Pisar <ppisar@redhat.com> - 2.009-3
changelog:
  - Enable tests (bug #1611737)
  - Adapt tests to security level 2 system-wide crypt policy (bug #1611737)


author: Paul Howarth <paul@city-fan.org> - 4.077-1
changelog:
  - Update to 4.077
    - Added method is_local() to Lite.pm
    - Fix Util/Makefile.PL to work around bug in Android's sh
    - Add method full6m()
    - Fix Util/Makefile.PL issue with clang compiler (CPAN RT#86831)
  - Classify buildreqs by usage
  - Use %license where possible


author: Paul Howarth <paul@city-fan.org> - 4.079-1
changelog:
  - Update to 4.079
    - Correct non-suppression of leading zeros in certain instances of new_no use
    - Put in missing code to propagate NetAddr::IP::Lite :nofqdn to IP.pm
  - Explicitly BR: perl-devel, needed for EXTERN.h
  - Simplify find commands using -empty and -delete


author: Paul Howarth <paul@city-fan.org> - 1.010-1
changelog:
  - Update to 1.010
    - Added 'msys' as a Unix-type OS
  - BR: perl-generators where available
  - Simplify find command using -delete
  - Update patches as needed


author: Paul Howarth <paul@city-fan.org> - 1.010-4
changelog:
  - Drop EL-5 support
    - Drop BuildRoot: and Group: tags
    - Drop explicit buildroot cleaning in %install section
    - Drop explicit %clean section
    - Drop workaround for building with Test::More < 0.88
    - Spell checker is always hunspell now
  - Introduce build-condition for optional tests


author: Petr Pisar <ppisar@redhat.com> - 3.28-2
changelog:
  - Introduce a build-condition on groff
  - Rename a _without_tk build-condition to
    _without_perl_Pod_Perldoc_enables_tk_test


author: Paul Howarth <paul@city-fan.org> - 0.26-1
changelog:
  - Update to 0.26
    - gailookup.pl.in: Add -P option to ease specification of port number
    - gailookup.pl.in: Add awareness of AI_ALL and AI_V4MAPPED
    - gailookup.pl.in: Add -r option to do reverse lookup
    - System inet_ntop broken in darwin (CPAN RT#113005)
    - Makefile.PL: Make Socket6 buildable on Android (CPAN RT#98181)
  - Simplify find commands using -delete
  - Explicitly BR: perl-devel, needed for EXTERN.h


author: Paul Howarth <paul@city-fan.org> - 0.28-1
changelog:
  - Update to 0.28
    - aclocal.m4 (IPv6_CHECK_INET_NTOP): inet_ntop(3) may return an
      IPv4-compatible IPv6 address (CPAN RT#113950)
  - BR: perl-generators


author: Paul Howarth <paul@city-fan.org> - 0.103011-1
changelog:
  - Update to 0.103011
    - Do not load Sub::Install, since it isn't used!
    - Eliminate superfluous FULL STOP characters (".")
  - Update patch for building with old Test::More versions
  - Classify buildreqs by usage
  - Use %license where possible


author: Paul Howarth <paul@city-fan.org> - 0.103012-1
changelog:
  - Update to 0.103012
    - Consider license names without parentheses when scanning text for license
    - When scanning text for license, put known substrings inside \b..\b
  - Simplify find command using -delete
  - Update patch for building with old Test::More versions


author: Paul Howarth <paul@city-fan.org> - 0.103013-1
changelog:
  - Update to 0.103013
    - guess_license_from_pod() now knows about Software::License::CC0_1_0
    - Enable "v" as a version word
    - Improve FreeBSD (2-Clause) phrases
    - Added EUPL v1.1 and v1.2
  - This release by LEONT → update source URL
  - Drop EL-5 support
    - Drop BuildRoot: and Group: tags
    - Drop explicit buildroot cleaning in %install section
    - Drop explicit %clean section
    - Drop workaround for building with Test::More < 0.88


author: Petr Pisar <ppisar@redhat.com> - 1:2.56-368
changelog:
  - Fix a stack buffer overflow in deserialization of hooks (RT#130635)
  - Fix a memory leak of a class name from retrieve_hook() on an exception
    (RT#130635)


author: Paul Howarth <paul@city-fan.org> - 1.6-1
changelog:
  - Update to 1.6
    - New maintainer: LEEJO
    - Add Changes file
    - Add link to github repo
    - Add strict and warnings
    - Add LICENSE to POD + LICENSE file
    - Add META.* files through make dist
    - Add .travis.yml for CI
  - This release by LEEJO → update source URL
  - Drop EL-5 support
    - Drop BuildRoot: and Group: tags
    - Drop explicit buildroot cleaning in %install section
    - Drop explicit %clean section


author: Paul Howarth <paul@city-fan.org> - 0.987-15
changelog:
  - Drop some support for older distributions
    - Drop BuildRoot: and Group: tags
    - Drop explicit buildroot cleaning in %install section
    - Drop explicit %clean section
    - Drop workarounds for building with Test::More < 0.94


author: Daniel P. Berrangé <berrange@redhat.com> - 4.5.0-4
changelog:
  - Fix typed parameter memory handling (rhbz #1602346)
  - Fix missing NWFilterBinding module (rhbz #1615841)


author: Paul Howarth <paul@city-fan.org> - 1.302067-1
changelog:
  - Update to 1.302067
    - Fix double release when 'throw' is used in context_do()
    - Repo management improvements
    - Better handling of info vs. diag in ->send_event
    - Fix test that used 'parent'
    - Better handling of non-bumping failures (#728)
    - Set the TEST_ACTIVE env var to true
    - Set the TEST2_ACTIVE env var to true
    - Fix cmp_ok output in some confusing cases (#6)
    - Update travis config
    - Add missing author deps
    - Fix handling of negative pids on Windows
    - Add can() to Test::Tester::Delegate (despite deprecation)
    - Fix some minor test issues
    - Handle cases where SysV IPC can be available but not enabled
    - Import 'context' into Test2::IPC; it is used by 'cull'
    - Propagate warnings settings to use_ok (#736)
    - Fix context test for recent blead


author: Paul Howarth <paul@city-fan.org> - 1.302073-1
changelog:
  - Update to 1.302073
    - Add TO_JSON and from_json methods to Test2::Event and Test2::Trace::Util to
      facilitate transferring event data between processes (#741)
    - Generate HashBase from Object::HashBase, which has been split out
    - When a subtest is marked as todo, all of its contained Ok and Subtest
      events are now updated so that they return true for $e->effective_pass
      (#742)
    - Added two new event classes, Test2::Event::Encoding and
      Test2::Event::TAP::Version; these are primarily being added for the benefit
      of Test2::Harness now, but they could be useful for other Test2 event
      consumer tools in the future (#743)
    - Expose tools.pl as Test2::Tools::Tiny


author: Paul Howarth <paul@city-fan.org> - 1.302075-1
changelog:
  - Update to 1.302075
    - Add 'cid' to trace
    - Add signatures to trace
    - Add related() to events
    - Now it is possible to check if events are related
    - Add 'no_fork' option to run_subtest()


author: Paul Howarth <paul@city-fan.org> - 1.302078-1
changelog:
  - Update to 1.302078
    - Fix crash when TB->reset used inside subtest
    - Fix #762, newlines for todo subtest
    - Revisit #637, fix rare race condition it created


author: Paul Howarth <paul@city-fan.org> - 1.302083-1
changelog:
  - Update to 1.302083
    - Fixes for '. in @INC' changes (#768)
    - Timeout when waiting for child procs and threads (#765)
    - Fix SIGSYS localization issue (#758)
    - Fix outdated docs (#759, #754)
    - Fix bail-out in buffered subtest (#747)
    - Fix threads timeout for older perls (as best we can)
    - Fix test that incorrectly called private function as method
    - Update some breakage info for Test::More::Prefix and
      Test::DBIx::Class::Schema


author: Paul Howarth <paul@city-fan.org> - 1.302085-1
changelog:
  - Update to 1.302085
    - Better IO management
    - Allow access to the STDERR/STDOUT Test2::API uses
    - Formatters should use the Test2::API handles


author: Paul Howarth <paul@city-fan.org> - 1:1.302113-1
changelog:
  - Update to 1.302113
    - Fix test on threaded 5.8
    - Fix SIGPIPE in IPC test
    - Mark t/Test2/regression/gh_16.t as usually AUTHOR_TESTING only


author: Paul Howarth <paul@city-fan.org> - 1:1.302118-1
changelog:
  - Update to 1.302118
    - Added pre-subtest hook to Test2::API (GH#801)
    - ipc_wait now reports exit and signal values
    - Add better interface for ipc_wait
    - Fix event Out of Order bug
    - Add driver_abort() hook for IPC Drivers


author: Paul Howarth <paul@city-fan.org> - 1:1.302133-1
changelog:
  - Update to 1.302133
    - Make sure event puts the uuid into the about facet
    - Add method to validate facet data
    - Add Test2::Event::V2 event class, and context helpers
    - Improve how events handle facets
    - Break out meta_facet_data
    - Document and fix Facets2Legacy
    - Fix nested and in_subtest to look at hub facets
    - Fix event->related and trace with uuid


author: Paul Howarth <paul@city-fan.org> - 1:1.302135-1
changelog:
  - Update to 1.302135
    - Make sure all hubs, events, and contexts get a unique (per run) id
    - Use a common generator for unique(enough) id's (not UUIDs)


author: Steven Pritchard <steve@kspei.com> 1:1.16-4
changelog:
  - Fix find option order.
  - Use fixperms macro instead of our own chmod incantation.
  - BR ExtUtils::MakeMaker.
  - Remove check macro cruft.


author: Jitka Plesnikova <jplesnik@redhat.com> - 1:1.20-10
changelog:
  - Remove perl(base) from BR
  - Package README and ChangeLog
  - Replace PERL_INSTALL_ROOT with DESTDIR
  - Remove deleting empty directories


author: Chris Weyl <cweyl@alumni.drew.edu> - 0.04-1
changelog:
  - Update by Fedora::App::MaintainerTools 0.004
  - PERL_INSTALL_ROOT => DESTDIR
  - Updating to latest GA CPAN version (0.04)


author: Paul Howarth <paul@city-fan.org> - 0.07-1
changelog:
  - Update to 0.07
    - Allow multiple finally blocks
    - Pass the error, if any, to finally blocks when called
    - Documentation fixes and clarifications
  - This release by RJBS -> update source URL


author: Paul Howarth <paul@city-fan.org> - 0.11-4
changelog:
  - BR: perl(Carp)
  - Don't need to remove empty directories from buildroot
  - Don't use macros for commands
  - Drop redundant %{?perl_default_filter}
  - Enhance %description
  - Reinstate EPEL-5 compatibility:
    - Define buildroot
    - Clean buildroot in %install and %clean
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 0.13-1
changelog:
  - Update to 0.13
    - Fix tests failing on 5.6.x due to differing DESTROY semantics
    - Excise superfluous local($@) call - 7% speedup
    - Fix broken URLs (CPAN RT#55659)
    - Proper exception on erroneous usage of bare catch/finally (CPAN RT#81070)
    - Proper exception on erroneous use of multiple catch{} blocks
    - Clarify exception occuring on unterminated try block (CPAN RT#75712)
    - Fix the prototypes shown in docs to match code (CPAN RT#79590)
    - Warn loudly on exceptions in finally() blocks
    - dzilify
  - Ship upstream LICENSE and README files
  - Classify buildreqs by usage
  - Add buildreqs for extra tests and explicitly run them


author: Paul Howarth <paul@city-fan.org> - 0.15-1
changelog:
  - Update to 0.15
    - Optionally use Sub::Name to name the try/catch/finally blocks, if available
  - BR:/R: perl(Sub::Name)
  - Drop obsoletes/provides for old -tests subpackage


author: Paul Howarth <paul@city-fan.org> - 0.17-1
changelog:
  - Update to 0.17
    - Work around Perl RT#119311, which was causing incorrect error messages in
      some cases during global destruction
      (https://github.com/doy/try-tiny/pull/9)
  - Add patch to support building with Test::More < 0.88


author: Paul Howarth <paul@city-fan.org> - 0.18-1
changelog:
  - Update to 0.18
    - Fix tests for pre-Test-More-0.88 (https://github.com/doy/try-tiny/pull/10)
  - Drop upstreamed patch for building with Test::More < 0.88


author: Paul Howarth <paul@city-fan.org> - 0.19-1
changelog:
  - Update to 0.19
    - Fix an obscure issue with loading modules during global destruction
      (https://github.com/doy/try-tiny/pull/11)
    - Documentation updates (https://github.com/doy/try-tiny/pull/12)
  - Add patch to support building with Test::More < 0.88 again


author: Paul Howarth <paul@city-fan.org> - 0.21-1
changelog:
  - Update to 0.21
    - Also skip the test if Capture::Tiny is too old
      (https://github.com/doy/try-tiny/issues/17)


author: Paul Howarth <paul@city-fan.org> - 0.22-1
changelog:
  - Update to 0.22
    - Add optional test deps as recommended prereqs
      (https://github.com/doy/try-tiny/pull/18)
  - Update patch for building with Test::More < 0.88


author: Paul Howarth <paul@city-fan.org> - 0.24-1
changelog:
  - Update to 0.24
    - Fix syntax of example code (PR#22)
    - 'perl' removed from prerequisite recommendations, to avoid tripping up CPAN
      clients
    - Sub::Util is used preferentially to Sub::Name in most cases (PR#27)
  - This release by ETHER → update source URL
  - Modernize spec
  - Don't run the extra tests


author: Paul Howarth <paul@city-fan.org> - 0.27-1
changelog:
  - Update to 0.27
    - "finally" blocks are now run for all methods of leaving the try block
       (including via exit, goto) (CPAN RT#112099)
    - Switch from finalizers using an array to a hash, to resolve segfaults when
      creating a pseudofork on MSWin before perl 5.20
      (karenetheridge/Sub-Name/#3)
    - Repository moved to the github p5sagit organization (the primary is on
      shadowcat, mirrored to github)
  - BR: perl-generators
  - Simplify find command using -delete


author: Paul Howarth <paul@city-fan.org> - 0.28-1
changelog:
  - Update to 0.28
    - Enabled some tests of finally blocks that were disabled on 5.6, now that
      that functionality works (since 0.13) (GH#4)


author: Paul Howarth <paul@city-fan.org> - 0.29-1
changelog:
  - Update to 0.29
    - Skip tests of "when" and "given/when" usage for perl 5.27.7 *only*
      (see CPAN RT#123908)


author: Paul Howarth <paul@city-fan.org> - 1.71-5
changelog:
  - Soften Business::ISBN dependency from Requires: to Suggests: to avoid
    pulling in gd and X libraries (#1380152)


author: Paul Howarth <paul@city-fan.org> - 1.1-23
changelog:
  - Fix FTBFS due to missing buildreq perl-devel
  - Simplify find commands using -empty and -delete
  - Make %files list more explicit


author: Petr Pisar <ppisar@redhat.com> - 1:2.0129-5
changelog:
  - Fix CVE-2017-10672 (use-after-free by controlling the arguments to
    a replaceChild call) (bug #1470205)


author: Petr Pisar <ppisar@redhat.com> - 2.44-11
changelog:
  - Fix a buffer overwrite in parse_stream() with wide characters on the standard
    input (bug #1658512)


author: Emmanuel Seyman <emmanuel@seyman.fr> - 0.05-19
changelog:
  - Add more BuildRequires
  - Add perl default filter
  - Use NO_PACKLIST=1 when creating Makefile
  - Remove no-longer-used declarations
  - Tighten file listing


author: Paul Howarth <paul@city-fan.org> - 1.21-1
changelog:
  - Update to 1.21
    - Declare variables with our() to avoid warnings (GH#109, GH#171)
    - Empty mapping value at the end resolves to null (was becoming empty string)
      (GH#131, GH#170)
    - Output key in warning when duplicate key was found (GH#119, GH#169)
    - Allow reading and writing to IO::Handle (GH#157, GH#168)


author: Paul Howarth <paul@city-fan.org> - 1.24-1
changelog:
  - Update to 1.24
    - Fix $LoadCode (GH#180, GH#181, GH#182)
  - This release by TINITA → update source URL
  - Drop redundant Group: tag


author: Petr Pisar <ppisar@redhat.com> - 3.10-2
changelog:
  - Net::libnetFAQ document replaced with a hyper link because of the Artistic
    license (CPAN RT#117888)


author: Robin Norwood <rnorwood@redhat.com> - 5.808-1
changelog:
  - Update to latest CPAN version
  - Re-enable tests.  We'll see if they work now
  - Move Requires filter into spec file
  - Add Provides filter for unnecessary unversioned provides


author: Robin Norwood <rnorwood@redhat.com> - 5.808-4
changelog:
  - Fix various issues from package review:
  - Fix tabs and spacing
  - Remove unneeded BR: perl
  - convert non-utf-8 files to utf-8
  - Resolves: bz#226268


author: Marcela Mašláňová <mmaslano@redhat.com> 5.816-1
changelog:
  - update to 5.816
  - fix #465855 - install --aliases by default
  - use upstream patch for previous problem (see rt 38736)


author: Ralf Corsépius <corsepiu@fedoraproject.org> - 5.837-2
changelog:
  - Add missing ':' to filter_from_requires perl(HTTP::GHTTP).
  - filter_from_provides /perl(HTTP::Headers)$/d instead of /perl(HTTP::Headers)/d.


author: Petr Pisar <ppisar@redhat.com> - 6.02-1
changelog:
  - 6.02 bump
  - HTTPS support unbundled by upstream to break depency cycle in CPAN utilities.
    Install or depend on perl(LWP::Protocol::https) explicitly, if you need
    HTTPS support.


author: Paul Howarth <paul@city-fan.org> - 1:0.236-1
changelog:
  - Update to 0.236
    - Add Travis test configuration
    - Make test for PMC availability more reliable
    - Disable benchmark test rt62341.t as it runs out of memory on many smoker
      systems (CPAN RT#118310)
  - Simplify find command using -delete


author: Paul Howarth <paul@city-fan.org> - 1:0.237-1
changelog:
  - Update to 0.237
    - Don't load vars.pm (CPAN RT#132077)
  - Drop legacy Group: tag
  - Drop buildroot cleaning in %install section


author: Petr Pisar <ppisar@redhat.com> - 4.09-3
changelog:
  - Fix pod2man and pod2text error messages when standard input is empty
  - Fix layers detection on output file handle (CPAN RT#122521)


author: Petr Pisar <ppisar@redhat.com> - 6:0.99.18-7
changelog:
  - Remove useless build-time dependency on ExtUtils::CBuilder
  - Fix documentation about numify() and stringify() trailing zeros
    (CPAN RT#64635, CPAN RT#122858)


author: Peter Jones <pjones@redhat.com> - 0.8-1
changelog:
  - Update to 0.8
  - Don't open the db read-write
  - Fix permissions on keystore (everybody can sign with test keys)


author: Peter Jones <pjones@redhat.com> - 0.9-1
changelog:
  - Update to 0.9
  - Bug fix from Gary Ching-Pang Lin
  - Support NSS Token selection for use with smart cards.


author: Peter Jones <pjones@redhat.com> - 0.99-1
changelog:
  - Update to 0.99
  - Add documentation for client/server mode.
  - Add --pinfd and --pinfile to server mode.


author: Peter Jones <pjones@redhat.com> - 0.99-4
changelog:
  - Fix some more bugs found by valgrind and coverity.
  - Don't build utils/ ; we're not using them and they're not ready anyway.


author: Peter Jones <pjones@redhat.com> - 0.99-7
changelog:
  - setfacl u:kojibuilder:rw /var/run/pesign/socket
  - Fix command line checking in client
  - Add client stdin pin reading.


author: Peter Jones <pjones@redhat.com> - 0.104-1
changelog:
  - Make sure alignment is correct on signature list entries
    Resolves: rhbz#963361
  - Make sure section alignment is correct if we have to extend the file


author: Peter Jones <pjones@redhat.com> - 0.111-5
changelog:
  - Actually do a better job of choosing which cert to use when, so people will
    stop seeing any of this problem.  (Thanks for the thought, jforbes.)
    Resolves: rhbz#1283475
    Resolves: rhbz#1284063
    Resolves: rhbz#1284561


author: Peter Jones <pjones@redhat.com> - 0.111-6
changelog:
  - *Don't* use --certdir if we're using the socket.
    Related: rhbz#1283475
    Related: rhbz#1284063
    Related: rhbz#1284561


author: Peter Jones <pjones@redhat.com> - 0.112-1
changelog:
  - Update to 0.112
  - Also fix up some spec file woes:
    - dumb things in %setup
    - find-debuginfo.sh not working right for some source files...


author: Peter Jones <pjones@redhat.com> - 0.112-5
changelog:
  - Don't Req: or BuildReq: coolkey or opensc; those belong in system deploy
    scripts.
    Related: rhbz#1349073


author: Peter Jones <pjones@redhat.com> - 0.112-25
changelog:
  - Preserve .py timestamp during install so .pyc/.pyo files have the same
    timestamp on all arches, preventing rpmdiff from complaining.
    Related: rhbz#1625388


author: Remi Collet <rcollet@redhat.com> - 7.2.7-1
changelog:
  - Update to 7.2.7 - http://www.php.net/releases/7_2_7.php
  - drop -mstackrealign option, workaround to #1593144


author: Stefan Becker <chemobejk@gmail.com> - 1.22.1-1
changelog:
  - update to 1.22.1:
      - fix multiple client detection
      - speed up Lync Autodiscover
      - avoid rare SSL read deadlock
      - various bug fixes


author: Stefan Becker <chemobejk@gmail.com> - 1.23.0-1
changelog:
  - update to 1.23.0:
      - add support for IPv6 addresses in SIP & SDP messages
      - extend libpurple D-Bus interface
      - don't load buddy photos from unknown sites by default
  - add BR dbus-1, gstreamer-rtp-1.0 & krb5


author: Stefan Becker <chemobejk@gmail.com> - 1.23.1-1
changelog:
  - update to 1.23.1:
      - add support for user redirect in Lync autodiscover
      - enable audio/video calls for Office365 cloud-based accounts
  - drop obsolete patch for GCC 8.0 compilation error


author: Wim Taymans <wtaymans@redhat.com> - 0.2.4-1
changelog:
  - Update to 0.2.4
  - Add defines for cursor and bitmap metadata
  - Revert patch that requires too new meson
  - Resolves: #1655028


author: Wim Taymans <wtaymans@redhat.com> - 0.2.5-1
changelog:
  - Update to 0.2.5
  - Revert patch that requires too new meson
  - Add patch to avoid invalid conversion error with C++ compilers
  - Resolves: #1664569


author: Red Hat PKI Team <rhcs-maint@redhat.com> 10.8.3-1
changelog:
  - Rebased to PKI 10.8.3
  - Bug #1809210 - TPS installation failure on HSM machine
  - Bug #1807421 - Subordinate CA installation failed
  - Bug #1806840 - KRA cloning with HSM failed


author: Coty Sutherland <csutherl@redhat.com> - 1:9.0.7-14
changelog:
  - Update to JWS 5.0.2 distribution
  - Resolves: rhbz#1658846 CVE-2018-8034 pki-servlet-container: tomcat: host name verification missing in WebSocket client
  - Resolves: rhbz#1579614 CVE-2018-8014 pki-servlet-container: tomcat: Insecure defaults in CORS filter enable 'supportsCredentials' for all origins
  - Resolves: rhbz#1619232 - CVE-2018-8037 pki-servlet-container: tomcat: Due to a mishandling of close in NIO/NIO2 connectors user sessions can get mixed up
  - Resolves: rhbz#1641874 - CVE-2018-11784 pki-servlet-container: tomcat: Open redirect in default servlet


author: Tomas Orsava <torsava@redhat.com> - 4.5.1-7
changelog:
  - New subpackage platform-python-coverage without files from /usr/bin/*
  - python3-coverage contains only files from /usr/bin/* and depends
    on platform-python-coverage
  - Resolves: rhbz#1658674


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-2
changelog:
  - disable invocation of brp-python-bytecompile in postprocessing, since
  it would be with the wrong version of python (adapted from ivazquez'
  python3000 specfile)
  - use a custom implementation of __find_provides in order to filter out bogus
  provides lines for the various .so modules
  - fixup distutils/unixccompiler.py to remove standard library path from rpath
  (patch 1, was Patch0 in ivazquez' python3000 specfile)
  - split out libraries into a -libs subpackage
  - update summaries and descriptions, basing content on ivazquez' specfile
  - fixup executable permissions on .py, .xpm and .xbm files, based on work in
  ivazquez's specfile
  - get rid of DOS batch files
  - fixup permissions for shared libraries from non-standard 555 to standard 755
  - move /usr/bin/python*-config to the -devel subpackage
  - mark various directories as being documentation


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-3
changelog:
  - remove executable flag from various files that shouldn't have it
  - fix end-of-line encodings
  - fix a character encoding


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-4
changelog:
  - update patch0's setup of the crypt module to link it against libcrypt
  - update patch0 to comment "datetimemodule" back out, so that it is built
  using setup.py (see Setup, option 3), thus linking it statically against
  timemodule.c and thus avoiding a run-time "undefined symbol:
  _PyTime_DoubleToTimet" failure on "import datetime"


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-5
changelog:
  - fixup importlib/_bootstrap.py so that it correctly handles being unable to
  open .pyc files for writing (patch 2, upstream issue 7187)
  - actually apply the rpath patch (patch 1)


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-6
changelog:
  - reword description, based on suggestion by amcnabb
  - fix the test_email and test_imp selftests (patch 3 and patch 4 respectively)
  - fix the test_tk and test_ttk_* selftests (patch 5)
  - fix up the specfile's handling of shebang/perms to avoid corrupting
  test_httpservers.py (sed command suggested by amcnabb)


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-7
changelog:
  - remove commented-away patch 51 (python-2.6-distutils_rpm.patch): the -O1
  flag is used by default in the upstream code
  - "Makefile" and the config-32/64.h file are needed by distutils/sysconfig.py
  _init_posix(), so we include them in the core package, along with their parent
  directories (bug 531901)


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-8
changelog:
  - add a provides of "python(abi)" (see bug 532118)
  - fix issues identified by a.badger in package review (bug 526126, comment 39):
    - use "3" thoughout metadata, rather than "3.*"
    - remove conditional around "pkg-config openssl"
    - use standard cleanup of RPM_BUILD_ROOT
    - replace hardcoded references to /usr with _prefix macro
    - stop removing egg-info files
    - use /usr/bin/python3.1 rather than /use/bin/env python3.1 when fixing
  up shebang lines
    - stop attempting to remove no-longer-present .cvsignore files
    - move the post/postun sections above the "files" sections


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-9
changelog:
  - add macros.python3 to the -devel subpackage, containing common macros for use
  when packaging python3 modules


author: Andrew McNabb <amcnabb@mcnabbs.org> - 3.1.1-10
changelog:
  - switched a few instances of "find |xargs" to "find -exec" for consistency.
  - made the description of __os_install_post more accurate.


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-11
changelog:
  - add %check section (thanks to Thomas Spura)
  - update patch 4 to use correct shebang line
  - get rid of stray patch file from buildroot


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-12
changelog:
  - remove build-time requirements on tix and tk, since we already have
  build-time requirements on the -devel subpackages for each of these (Thomas
  Spura)
  - replace usage of %define with %global (Thomas Spura)
  - remove forcing of CC=gcc as this old workaround for bug 109268 appears to
  longer be necessary
  - move various test files from the "tools"/"tkinter" subpackages to the "test"
  subpackage


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-14
changelog:
  - replace references to /usr with %{_prefix}; replace references to
  /usr/include with %{_includedir} (Toshio)


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-15
changelog:
  - fix the URLs output by pydoc so they point at python.org's 3.1 build of the
  docs, rather than the 2.6 build


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-16
changelog:
  - use the %{_isa} macro to ensure that the python-devel dependency on python
  is for the correct multilib arch (#555943)
  - delete bundled copy of libffi to make sure we use the system one


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-19
changelog:
  - add %py3dir macro to macros.python3 (to be used during unified python 2/3
  builds for setting up the python3 copy of the source tree)


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-20
changelog:
  - change python-3.1.1-config.patch to remove our downstream change to curses
  configuration in Modules/Setup.dist, so that the curses modules are built using
  setup.py with the downstream default (linking against libncursesw.so, rather
  than libncurses.so), rather than within the Makefile; add a test to %install
  to verify the dso files that the curses module is linked against the correct
  DSO (bug 539917; changes _cursesmodule.so -> _curses.so)


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-21
changelog:
  - introduce %{dynload_dir} macro
  - explicitly list all lib-dynload files, rather than dynamically gathering the
  payload into a temporary text file, so that we can be sure what we are
  shipping
  - introduce a macros.pybytecompile source file, to help with packaging python3
  modules (Source3; written by Toshio)
  - rename "2to3-3" to "python3-2to3" to better reflect python 3 module packaging
  plans


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-22
changelog:
  - update python-3.1.1-config.patch to remove downstream customization of build
  of pyexpat and elementtree modules
  - add patch adapted from upstream (patch 7) to add support for building against
  system expat; add --with-system-expat to "configure" invocation
  - remove embedded copies of expat and zlib from source tree during "prep"


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-24
changelog:
  - move the -gdb.py file from %{_libdir}/INSTSONAME-gdb.py to
  %{_prefix}/lib/debug/%{_libdir}/INSTSONAME.debug-gdb.py to avoid noise from
  ldconfig (bug 562980), and which should also ensure it becomes part of the
  debuginfo subpackage, rather than the libs subpackage
  - introduce %{py_SOVERSION} and %{py_INSTSONAME} to reflect the upstream
  configure script, and to avoid fragile scripts that try to figure this out
  dynamically (e.g. for the -gdb.py change)


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-25
changelog:
  - split configure options into multiple lines for easy of editing
  - add systemtap static markers (wcohen, mjw, dmalcolm; patch 8), a systemtap
  tapset defining "python.function.entry" and "python.function.return" to make
  the markers easy to use (dmalcolm; source 5), and an example of using the
  tapset to the docs (dmalcolm; source 6) (rhbz:545179)


author: Thomas Spura <tomspur@fedoraproject.org> - 3.1.1-26
changelog:
  - rebuild for new package of redhat-rpm-config (rhbz:564527)
  - use 'install -p' when running 'make install'


author: David Malcolm <dmalcolm@redhat.com> - 3.1.1-27
changelog:
  - add pyfuntop.stp example (source 7)
  - convert usage of $$RPM_BUILD_ROOT to %{buildroot} throughout, for
  consistency with python.spec


author: David Malcolm <dmalcolm@redhat.com> - 3.1.2-1
changelog:
  - update to 3.1.2: http://www.python.org/download/releases/3.1.2/
  - drop upstreamed patch 2 (.pyc permissions handling)
  - drop upstream patch 5 (fix for the test_tk and test_ttk_* selftests)
  - drop upstreamed patch 200 (path-fixing script)


author: David Malcolm <dmalcolm@redhat.com> - 3.1.2-3
changelog:
  - update python-gdb.py from v3 to v4 (fixing infinite recursion on reference
  cycles and tracebacks on bytes 0x80-0xff in strings, adding handlers for sets
  and exceptions)


author: David Malcolm <dmalcolm@redhat.com> - 3.1.2-5
changelog:
  - exclude test_http_cookies when running selftests, due to hang seen on
  http://koji.fedoraproject.org/koji/taskinfo?taskID=2088463 (cancelled after
  11 hours)
  - update python-gdb.py from v5 to py3k version submitted upstream


author: David Malcolm <dmalcolm@redhat.com> - 3.1.2-6
changelog:
  - build and install two different configurations of Python 3: debug and
  standard, packaging the debug build in a new "python3-debug" subpackage
  (patch 103)


author: David Malcolm <dmalcolm@redhat.com> - 3.1.2-7
changelog:
  - add configure-time support for COUNT_ALLOCS and CALL_PROFILE debug options
  (patch 104); enable them and the WITH_TSC option within the debug build


author: David Malcolm <dmalcolm@redhat.com> - 3.1.2-10
changelog:
  - ensure that the compiler is invoked with "-fwrapv" (rhbz#594819)
  - reformat whitespace in audioop.c (patch 106)
  - CVE-2010-1634: fix various integer overflow checks in the audioop
  module (patch 107)
  - CVE-2010-2089: further checks within the audioop module (patch 108)
  - CVE-2008-5983: the new PySys_SetArgvEx entry point from r81399 (patch 109)


author: David Malcolm <dmalcolm@redhat.com> - 3.1.2-11
changelog:
  - Fix an incompatibility between pyexpat and the system expat-2.0.1 that led to
  a segfault running test_pyexpat.py (patch 110; upstream issue 9054; rhbz#610312)


author: David Malcolm <dmalcolm@redhat.com> - 3.2-0.0.a1
changelog:
  - 3.2a1; add alphatag
  - rework %files in the light of PEP 3147 (__pycache__)
  - drop our configuration patch to Setup.dist (patch 0): setup.py should do a
  better job of things, and the %files explicitly lists our modules (r82746
  appears to break the old way of doing things).  This leads to various modules
  changing from "foomodule.so" to "foo.so".  It also leads to the optimized build
  dropping the _sha1, _sha256 and _sha512 modules, but these are provided by
  _hashlib; _weakref becomes a builtin module; xxsubtype goes away (it's only for
  testing/devel purposes)
  - fixup patches 3, 4, 6, 8, 102, 103, 105, 111 for the rebase
  - remove upstream patches: 7 (system expat), 106, 107, 108 (audioop reformat
  plus CVE-2010-1634 and CVE-2010-2089), 109 (CVE-2008-5983)
  - add machinery for rebuilding "configure" and friends, using the correct
  version of autoconf (patch 300)
  - patch the debug build's usage of COUNT_ALLOCS to be less verbose (patch 125)
  - "modulator" was removed upstream
  - drop "-b" from patch applications affecting .py files to avoid littering the
  installation tree


author: Thomas Spura <tomspur@fedoraproject.org> - 3.2-0.1.a1
changelog:
  - on 64bit "stdlib" was still "/usr/lib/python*" (modify *lib64.patch)
  - make find-provides-without-python-sonames.sh 64bit aware


author: David Malcolm <dmalcolm@redhat.com> - 3.2-0.3.a1
changelog:
  - Move test.support to core package (rhbz#596258)
  - Add various missing __pycache__ directories to payload


author: David Malcolm <dmalcolm@redhat.com> - 3.2-0.4.a1
changelog:
  - move most of the content of the core package to the libs subpackage, given
  that the libs aren't meaningfully usable without the standard libraries


author: David Malcolm <dmalcolm@redhat.com> - 3.2-0.5.b2
changelog:
  - 3.2b2
  - rework patch 3 (removal of mimeaudio tests), patch 6 (no static libs),
  patch 8 (systemtap), patch 102 (lib64)
  - remove patch 4 (rendered redundant by upstream r85537), patch 103 (PEP 3149),
  patch 110 (upstreamed expat fix), patch 111 (parallel build fix for grammar
  fixed upstream)
  - regenerate patch 300 (autotool intermediates)
  - workaround COUNT_ALLOCS weakref issues in test suite (patch 126, patch 127,
  patch 128)
  - stop using runtest.sh in %check (dropped by upstream), replacing with
  regrtest; fixup list of failing tests
  - introduce "pyshortver", "SOABI_optimized" and "SOABI_debug" macros
  - rework manifests of shared libraries to use "SOABI_" macros, reflecting
  PEP 3149
  - drop itertools, operator and _collections modules from the manifests as py3k
  commit r84058 moved these inside libpython; json/tests moved to test/json_tests
  - move turtle code into the tkinter subpackage


author: David Malcolm <dmalcolm@redhat.com> - 3.2-0.8.b2
changelog:
  - set EXTRA_CFLAGS to our CFLAGS, rather than overriding OPT, fixing a linker
  error with dynamic annotations (when configured using --with-valgrind)
  - fix the ppc build of the debug configuration (patch 130; rhbz#661510)


author: David Malcolm <dmalcolm@redhat.com> - 3.2-0.9.rc1
changelog:
  - 3.2rc1
  - rework patch 6 (static lib removal)
  - remove upstreamed patch 130 (ppc debug build)
  - regenerate patch 300 (autotool intermediates)
  - updated packaging to reflect upstream rewrite of "Demo" (issue 7962)
  - added libpython3.so and 2to3-3.2


author: David Malcolm <dmalcolm@redhat.com> - 3.2.1-1
changelog:
  - 3.2.1; refresh lib64 patch (102), subprocess unit test patch (129), disabling
  of static library build (due to Modules/_testembed; patch 6), autotool
  intermediates (patch 300)


author: David Malcolm <dmalcolm@redhat.com> - 3.2.1-5
changelog:
  - re-enable and fix the --with-tsc option on ppc64, and rework it on 32-bit
  ppc to avoid aliasing violations (patch 130; rhbz#698726)


author: David Malcolm <dmalcolm@redhat.com> - 3.2.2-2
changelog:
  - rewrite of "check", introducing downstream-only hooks for skipping specific
  cases in an rpmbuild (patch 132), and fixing/skipping failing tests in a more
  fine-grained manner than before; (patches 106, 133-142 sparsely, moving
  patches for consistency with python.spec: 128 to 134, 126 to 135, 127 to 141)


author: David Malcolm <dmalcolm@redhat.com> - 3.2.2-3
changelog:
  - renumber and rename patches for consistency with python.spec (8 to 55, 106
  to 104, 6 to 111, 104 to 113, 105 to 114, 125, 131, 130 to 143)


author: David Malcolm <dmalcolm@redhat.com> - 3.2.2-5
changelog:
  - support OpenSSL FIPS mode in _hashlib and hashlib; don't build the _md5 and
  _sha* modules, relying on _hashlib in hashlib (rhbz#563986; patch 146)


author: David Malcolm <dmalcolm@redhat.com> - 3.2.3-1
changelog:
  - 3.2.3; refresh patch 102 (lib64); drop upstream patches 148 (gdbm magic
  values), 149 (__pycache__ fix); add patch 152 (test_gdb regex)


author: David Malcolm <dmalcolm@redhat.com> - 3.2.3-4
changelog:
  - avoid allocating thunks in ctypes unless absolutely necessary, to avoid
  generating SELinux denials on "import ctypes" and "import uuid" when embedding
  Python within httpd (patch 155; rhbz#814391)


author: David Malcolm <dmalcolm@redhat.com> - 3.2.3-7
changelog:
  - update uid/gid handling to avoid int overflows seen with uid/gid
  values >= 2^31 on 32-bit architectures (patch 157; rhbz#697470)


author: David Malcolm <dmalcolm@redhat.com> - 3.3.0-0.1.b1
changelog:
  * Fri Jun 22 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-10
  - use macro for power64 (rhbz#834653)


author: David Malcolm <dmalcolm@redhat.com> - 3.3.0-0.1.b1
changelog:
  - 3.2 -> 3.3: https://fedoraproject.org/wiki/Features/Python_3.3
  - 3.3.0b1: refresh patches 3, 55, 102, 111, 113, 114, 134, 157; drop upstream
  patch 147; regenenerate autotools patch; drop "--with-wide-unicode" from
  configure (PEP 393); "plat-linux2" -> "plat-linux" (upstream issue 12326);
  "bz2" -> "_bz2" and "crypt" -> "_crypt"; egg-info files are no longer shipped
  for stdlib (upstream issues 10645 and 12218); email/test moved to
  test/test_email; add /usr/bin/pyvenv[-3.3] and venv module (PEP 405); add
  _decimal and _lzma modules; make collections modules explicit in payload again
  (upstream issue 11085); add _testbuffer module to tests subpackage (added in
  upstream commit 3f9b3b6f7ff0); fix test failures (patches 160 and 161);
  workaround erroneously shared _sysconfigdata.py upstream issue #14774; fix
  distutils.sysconfig traceback (patch 162); add BuildRequires: xz-devel (for
  _lzma module); skip some tests within test_socket (patch 163)


author: David Malcolm <dmalcolm@redhat.com> - 3.3.0-0.3.b2
changelog:
  - 3.3b1 -> 3.3b2; drop upstreamed patch 152; refresh patches 3, 102, 111,
  134, 153, 160; regenenerate autotools patch; rework systemtap patch to work
  correctly when LANG=C (patch 55); importlib.test was moved to
  test.test_importlib upstream


author: Toshio Kuratomi <toshio@fedoraproject.org> - 3.3.0-8
changelog:
  - Fix error in platform.platform() when non-ascii byte strings are decoded to
    unicode (rhbz#922149)


author: Bohuslav Kabrda <bkabrda@redhat.com> - 3.3.1-1
changelog:
  - Updated to Python 3.3.1.
  - Refreshed patches: 55 (systemtap), 111 (no static lib), 146 (hashlib fips),
  153 (fix test_gdb noise), 157 (uid, gid overflow - fixed upstream, just
  keeping few more downstream tests)
  - Removed patches: 3 (audiotest.au made it to upstream tarball)
  - Removed workaround for http://bugs.python.org/issue14774, discussed in
  http://bugs.python.org/issue15298 and fixed in revision 24d52d3060e8.


author: Bohuslav Kabrda <bkabrda@redhat.com> - 3.3.1-3
changelog:
  - Add patch that enables building on ppc64p7 (replace the sed, so that
  we get consistent with python2 spec and it's more obvious that we're doing it.


author: Bohuslav Kabrda <bkabrda@redhat.com> - 3.3.2-1
changelog:
  - Updated to Python 3.3.2.
  - Refreshed patches: 153 (gdb test noise)
  - Dropped patches: 175 (configure -Wformat, fixed upstream), 182 (gdb
  test threads)
  - Synced patch numbers with python.spec.


author: Bohuslav Kabrda <bkabrda@redhat.com> - 3.4.0-0.1.a4
changelog:
  - Update to Python 3.4 alpha 4.
  - Refreshed patches: 55 (systemtap), 102 (lib64), 111 (no static lib),
  114 (statvfs flags), 132 (unittest rpmbuild hooks), 134 (fix COUNT_ALLOCS in
  test_sys), 143 (tsc on ppc64), 146 (hashlib fips), 153 (test gdb noise),
  157 (UID+GID overflows), 173 (ENOPROTOOPT in bind_port), 186 (dont raise
  from py_compile)
  - Removed patches: 129 (test_subprocess nonreadable dir - no longer fails in
  Koji), 142 (the mock issue that caused this is fixed)
  - Added patch 187 (remove thread atfork) - will be in next version
  - Refreshed script for checking pyc and pyo timestamps with new ignored files.
  - The fips patch is disabled for now until upstream makes a final decision
  what to do with sha3 implementation for 3.4.0.


author: Bohuslav Kabrda <bkabrda@redhat.com> - 3.4.0-0.1.b1
changelog:
  - Update to Python 3.4 beta 1.
  - Refreshed patches: 102 (lib64), 111 (no static lib), 125 (less verbose COUNT
  ALLOCS), 141 (fix COUNT_ALLOCS in test_module), 146 (hashlib fips),
  157 (UID+GID overflows), 173 (ENOPROTOOPT in bind_port)
  - Removed patch 00187 (remove pthread atfork; upstreamed)


author: Bohuslav Kabrda <bkabrda@redhat.com> - 3.4.0-0.1.b2
changelog:
  - Update to Python 3.4 beta 2.
  - Refreshed patches: 55 (systemtap), 146 (hashlib-fips), 154 (test_gdb noise)
  - Dropped patches: 114 (statvfs constants), 177 (platform unicode)


author: Matej Stuchlik <mstuchli@redhat.com> - 3.4.0-5
changelog:
  - Don't add Werror=declaration-after-statement for extension
    modules through setup.py (PyBT#21121)


author: Dan Horák <dan[at]danny.cz> - 3.4.1-7
changelog:
  - update the arch list where valgrind exists - %power64 includes also
      ppc64le which is not supported yet


author: Matej Stuchlik <mstuchli@redhat.com> - 3.4.2-1
changelog:
  - Update to 3.4.2
  - Refreshed patches: 156 (gdb autoload)
  - Removed: 195 (Werror declaration), 197 (CVE-2014-4650)


author: Matej Stuchlik <mstuchli@redhat.com> - 3.4.2-7
changelog:
  - Fixed undefined behaviour in faulthandler which caused test to hang on x86_64
    (http://bugs.python.org/issue23433)


author: Matej Stuchlik <mstuchli@redhat.com> - 3.4.3-1
changelog:
  - Updated to 3.4.3
  - BuildPython now accepts additional build options
  - Temporarily disabled test_gdb on arm (rhbz#1196181)


author: Matej Stuchlik <mstuchli@redhat.com> - 3.4.3-4
changelog:
  - Use 1024bit DH key in test_ssl
  - Use -O0 when compiling -debug build
  - Update pip version variable to the version we actually ship


author: Thomas Spura <tomspur@fedoraproject.org> - 3.4.3-4
changelog:
  - python3-devel: Require python-macros for version independant macros such as
    python_provide. See fpc#281 and fpc#534.


author: Tomas Orsava <torsava@redhat.com> - 3.5.1-9
changelog:
  - Fix for: CVE-2016-0772 python: smtplib StartTLS stripping attack
  - Raise an error when STARTTLS fails
  - rhbz#1303647: https://bugzilla.redhat.com/show_bug.cgi?id=1303647
  - rhbz#1346345: https://bugzilla.redhat.com/show_bug.cgi?id=1346345
  - Fixed upstream: https://hg.python.org/cpython/rev/d590114c2394


author: Tomas Orsava <torsava@redhat.com> - 3.5.2-1
changelog:
  - Rebased to version 3.5.2
  - Set to work with pip version 8.1.2
  - Removed patches 207, 237, 241 as fixes are already contained in Python 3.5.2
  - Removed arch or environment specific patches 194, 196, 203, and 208
    as test builds indicate they are no longer needed
  - Updated patches 102, 146, and 242 to work with the new Python codebase
  - Removed patches 200, 201, 5000 which weren't even being applied


author: Tomas Orsava <torsava@redhat.com> - 3.5.2-2
changelog:
  - Updated .pyc 'bytecompilation with the newly installed interpreter' to also
    recompile optimized .pyc files
  - Removed .pyo 'bytecompilation with the newly installed interpreter', as .pyo
    files are no more
  - Resolves rhbz#1373635


author: Charalampos Stratakis <cstratak@redhat.com> - 3.5.2-6
changelog:
  - Use proper patch numbering and base upstream branch for
  porting ssl and hashlib modules to OpenSSL 1.1.0
  - Drop hashlib patch for now
  - Add riscv64 arch to 64bit and no-valgrind arches


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.0-7
changelog:
  - Fix error check, so that Random.seed actually uses OS randomness (rhbz#1412275)
  - Skip test_aead_aes_gcm during rpmbuild


author: Tomas Orsava <torsava@redhat.com> - 3.6.0-8
changelog:
  - Modify the runtime dependency of python3-libs on system-python-libs to use
    just the version and release number, but not the dist tag due to Modularity


author: Tomas Orsava <torsava@redhat.com> - 3.6.0-9
changelog:
  - Modify the runtime dependency of python3-libs on system-python-libs again,
    because previous attempt didn't work properly with dnf resolving mechanism


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.0-12
changelog:
  - BuildRequire the new dependencies of setuptools when rewheel mode is enabled
  in order for the virtualenvs to work properly


author: Michal Cyprian <mcyprian@redhat.com> - 3.6.0-18
changelog:
  - Set values of prefix and exec_prefix to /usr/local for
    /usr/bin/python* executables
  - Use new %_module_build macro


author: Michal Cyprian <mcyprian@redhat.com> - 3.6.0-19
changelog:
  - Revert "Set values of prefix and exec_prefix to /usr/local for
    /usr/bin/python* executables..." to prevent build failures
    of packages using alternate build tools


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.0-21
changelog:
  - Use proper command line parsing in _testembed
  - Backport of PEP 538: Coercing the legacy C locale to a UTF-8 based locale
    https://fedoraproject.org/wiki/Changes/python3_c.utf-8_locale


author: Iryna Shcherbina <ishcherb@redaht.com> - 3.6.1-0.1.rc1
changelog:
  - Update to Python 3.6.1 release candidate 1
  - Add patch 264 to skip a known test failure on aarch64


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.1-6
changelog:
  - Enable profile guided optimizations for x86_64 and i686 architectures
  - Update to a newer implementation of PEP 538
  - Update description to reflect that Python 3 is now the default Python


author: Tomas Orsava <torsava@redhat.com> - 3.6.1-7
changelog:
  - Added a dependency to the devel subpackage on python3-rpm-generators which
    have been excised out of rpm-build
  - Updated notes on bootstrapping Python on top of this specfile accordingly
  - Involves: rhbz#1410631, rhbz#1444925


author: Florian Weimer <fweimer@redhat.com> - 3.6.2-4
changelog:
  - Do not generate debuginfo subpackages (#1476593)
  - Rebuild with binutils fix for ppc64le (#1475636)


author: Tomas Orsava <torsava@redhat.com> - 3.6.2-5
changelog:
  - Dropped BuildRequires on db4-devel which was useful for Python 2 (module
    bsddb), however, no longer needod for Python 3
  - Tested building Python 3 with and without the dependency, all tests pass and
    filelists of resulting RPMs are identical


author: Michal Cyprian <mcyprian@redhat.com> - 3.6.2-7
changelog:
  - Revert "Add --executable option to install.py command"
    This enhancement is currently not needed and it can possibly
    collide with `pip --editable`option


author: Miro Hrončok <mhroncok@redhat.com> - 3.6.2-8
changelog:
  - Have /usr/bin/2to3 (rhbz#1111275)
  - Provide 2to3 and idle3, list them in summary and description (rhbz#1076401)


author: Petr Viktorin <pviktori@redhat.com> - 3.6.2-11
changelog:
  - Add bcond for --without optimizations
  - Reword package descriptions
  - Remove Group declarations
  - Skip failing test_float_with_comma


author: Michal Cyprian <mcyprian@redhat.com> - 3.6.2-12
changelog:
  - Use python3 style of calling super() without arguments in rpath
    patch to prevent recursion in UnixCCompiler subclasses
  Resolves: rhbz#1458122


author: Petr Viktorin <pviktori@redhat.com> - 3.6.2-13
changelog:
  - Rename patch files to be consistent
  - Run autotools to generate the configure script before building
  - Merge lib64 patches (104 into 102)
  - Skip test_bdist_rpm using test config rather than a patch (removes patch 137)
  - Remove patches 157 and 186, which had test changes left over after upstreaming
  - Remove patch 188, a temporary workaround for hashlib tests
  - Merge patches 180, 206, 243, 5001 (architecture naming) into new patch 274
  - Move python2-tools conflicts to tools subpackage (it was wrongly in tkinter)


author: Miro Hrončok <mhroncok@redhat.com> - 3.6.2-14
changelog:
  - Expat >= 2.1.0 is everywhere, remove explicit requires
  - Conditionalize systemtap-devel BuildRequires
  - For consistency, require /usr/sbin/ifconfig instead of net-tools


author: Petr Viktorin <pviktori@redhat.com> - 3.6.2-16
changelog:
  - Specfile cleanup
  - Make the main description also applicable to the SRPM
  - Add audiotest.au to the test package


author: Miro Hrončok <mhroncok@redhat.com> - 3.6.2-19
changelog:
  - Move pathfix.py to bindir, https://github.com/fedora-python/python-rpm-porting/issues/24
  - Make the -devel package require redhat-rpm-config
  Resolves: rhbz#1496757


author: Björn Esser <besser82@fedoraproject.org> - 3.6.4-8
changelog:
  - Add patch to explicitly link _ctypes module with -ldl (#1537489)
  - Refactored patch for libxcrypt
  - Re-enable strict symbol checks in the link editor


author: Tomas Orsava <torsava@redhat.com> - 3.6.4-10
changelog:
  - Disable test_gdb for all arches and test_buffer for ppc64le in anticipation
    of the F28 mass rebuild
  - Re-enable these tests after the mass rebuild when they can be properly
    addressed


author: Iryna Shcherbina <ishcherb@redhat.com> - 3.6.4-14
changelog:
  - Remove the python3-tools package (#rhbz 1312030)
  - Move /usr/bin/2to3 to python3-devel
  - Move /usr/bin/idle and idlelib to python3-idle
  - Provide python3-tools from python3-idle


author: Miro Hrončok <mhroncok@redhat.com> - 3.6.4-15
changelog:
  - Filter out automatic /usr/bin/python3.X requirement,
    recommend the main package from libs instead
  Resolves: rhbz#1547131


author: Miro Hrončok <mhroncok@redhat.com> - 3.6.4-18
changelog:
  - Fix the py_byte_compile macro to work on Python 2
  - Remove the pybytecompile macro file from the flat package
  Resolves: rhbz#1484993


author: Tomas Orsava <torsava@redhat.com> - 3.6.5-3
changelog:
  - Platform-Python: Rebase implementation from RHEL8 Alpha:
  - Move the main executable to /usr/libexec/platform-python
  - Move /usr/bin/python*-config and /usr/bin/pythonX.Ym scripts to /usr/libexec/
  - Provide symlink to the main executable and other scripts from /usr/bin/,
    these will be later shipped only in the python36 module


author: Tomas Orsava <torsava@redhat.com> - 3.6.5-7
changelog:
  - Fix %py_byte_compile macro: when invoked with a Python 2 binary it also
    mistakenly ran py3_byte_compile


author: Tomas Orsava <torsava@redhat.com> - 3.6.6-4
changelog:
  - Create the `libs-devel` subpackage and move `devel` contents there
  - `devel` subpackage is only for the buildroot and requires `python36-devel`
    to get /usr/bin/python3{,-config} symlinks there
  - `devel` subpackage will not be shipped into RHEL8, only `libs-devel` will
  - `debug` subpackage now runtime requires `libs-devel` instead of `devel`


author: Petr Viktorin <pviktori@redhat.com> - 3.6.6-5
changelog:
  - Fix the `devel` subpackage to require python3, rather than python36-devel,
    and provide /usr/bin/python3-config itself.


author: Petr Viktorin <pviktori@redhat.com> - 3.6.6-6
changelog:
  - Make `devel` subpackage require python36-devel again
    (and get /usr/bin/python3 and /usr/bin/python3-config from that).
  - Remove /usr/bin/python3* executables
  - Use pip36 instead of `pip3`


author: Tomas Orsava <torsava@redhat.com> - 3.6.6-9
changelog:
  - Rename the python3 subpackage to platform-python
  - Provide the `python3` name for backwards compatibility until it's taken over
    by the python36 component
  - The python36 component that contains /usr/bin/python3 will Provide the
    name `python3` in its upcoming update
  - Resolves: rhbz#1619153


author: Tomas Orsava <torsava@redhat.com> - 3.6.6-11
changelog:
  - Implement `alternatives` for chosing /usr/bin/python
  - Provide the default `no-python` alternative
  - Resolves: rhbz#1632625


author: Tomas Orsava <torsava@redhat.com> - 3.6.6-12
changelog:
  - Rename the python3-debug subpackage to platform-python-debug
  - Provide the `python3-debug` name for backwards compatibility until it's taken
    over by the python36 component
  - Rename the python3-libs-devel subpackage to platform-python-devel for
    symmetry with the `platform-python` and `platform-python-debug` package
  - Add symlink /usr/libexec/platform-python-debug that was mistakenly omitted
  - Related: rhbz#1619153


author: Tomas Orsava <torsava@redhat.com> - 3.6.6-13
changelog:
  - Stop providing the `python3` and `python3-debug` names from the
    platform-python/-debug subpackages
  - The `python3` and `python3-debug` names are now provided from the python36
    component
  - Conflict with older versions of `python3` and `python3-debug`
  - Related: rhbz#1619153


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.7-1
changelog:
  - Update to 3.6.7 (rhbz#1627739)
  - Re-enable test_gdb (rhbz#1639536)
  - Re-enable test_faulthandler (rhbz#1640147)


author: Tomas Orsava <torsava@redhat.com> - 3.6.7-2
changelog:
  - Switch to requiring platform-python-pip/setuptools instead of the python3-
    versions
  - Resolves: rhbz#1638836


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.8-7
changelog:
  - Disallow control chars in http URLs
  - Fixes CVE-2019-9740 and CVE-2019-9947
  Resolves: rhbz#1704365 and rhbz#1703531


author: Miro Hrončok <mhroncok@redhat.com> - 3.6.8-9
changelog:
  - Reduced default build flags used to build extension modules
    https://fedoraproject.org/wiki/Changes/Python_Extension_Flags
  Resolves: rhbz#1634784


author: Miro Hrončok <mhroncok@redhat.com> - 3.6.8-12
changelog:
  - Use RPM built wheels of pip and setuptools in ensurepip instead of our rewheel patch
  - Require platform-python-setuptools from platform-python-devel to prevent packaging errors
  Resolves: rhbz#1701286


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.8-13
changelog:
  - Do not set PHA verify flag on client side (rhbz#1725721)
  - Enable TLS 1.3 post-handshake authentication in http.client (rhbz#1671353)


author: Tomas Orsava <torsava@redhat.com> - 3.6.8-14
changelog:
  - Adding a new patch 329 that adds support for OpenSSL FIPS mode
  - Explicitly listing man pages in files section to fix an RPM warning
  Resolves: rhbz#1731424


author: Tomas Orsava <torsava@redhat.com> - 3.6.8-15
changelog:
  - Patch 329 that adds support for OpenSSL FIPS mode has been improved and
    bugfixed
  Resolves: rhbz#1744670 rhbz#1745499 rhbz#1745685


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.8-16
changelog:
  - Properly pass the -Og optimization flag to the debug build
  Resolves: rhbz#1712977 and rhbz#1714733


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.8-18
changelog:
  - Reduce the number of tests running during the profile guided optimizations build
  - Enable profile guided optimizations for all the supported architectures
  Resolves: rhbz#1749576


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.8-19
changelog:
  - Skip windows specific test_get_exe_bytes test case and enable test_distutils
  Resolves: rhbz#1754040


author: Tomas Orsava <torsava@redhat.com> - 3.6.8-21
changelog:
  - Patch 329 (FIPS) modified: Added workaround for mod_ssl:
    Skip error checking in _Py_hashlib_fips_error
  Resolves: rhbz#1760106


author: Tomas Orsava <torsava@redhat.com> - 3.6.8-22
changelog:
  - Changed Requires into Recommends for python3-pip to allow a lower RHEL8
    footprint for containers and other minimal environments
  Resolves: rhbz#1756217


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.8-23
changelog:
  - Modify the test suite to better handle disabled SSL/TLS versions and FIPS mode
  - Use OpenSSL's DRBG and disable os.getrandom() function in FIPS mode
  Resolves: rhbz#1754028, rhbz#1754027, rhbz#1754026, rhbz#1774471


author: Hans de Goede <jwrdegoede@fedoraproject.org> - 0.9.3-6
changelog:
  - Add patches from upstream git for devices with non upright mounted LCD panels
    https://bugs.freedesktop.org/show_bug.cgi?id=104714


author: Ray Strode <rstrode@redhat.com> - 0.9.3-7
changelog:
  - Add backports to avoid loading renderers on non-rhgb boot
    and to handle 'rhgb' when no renderers available
  - Move framebuffer plugin to graphics subpackage
    Related: #1600634


author: Ray Strode <rstrode@redhat.com> - 0.9.3-11
changelog:
  - Update description of charge theme (found by rpmdiff
    when building previous fix)
    Related: #1607020


author: Philip Kovacs <pkdevel@yahoo.com> - 2.1.0-1
changelog:
  - Update to 2.1.0
  - Added enviromnent module for pmi/pmix
  - Added pkgconfig files for pmix/pmi/pmi2
  - Ensure lexer sources are rebuilt
  - Removed obsolete sasl support
  - Use new ldconfig_scriplets macro


author: Lokesh Mandvekar <lsm5@redhat.com> - 0.4.1-2.gitb51d327
changelog:
  - add containernetworking-plugins v0.7.0 as a subpackage (podman dep)
  - release tag for the containernetworking-plugins is actually gotten from
  podman release tag.


author: Lokesh Mandvekar <lsm5@redhat.com> - 0.6.1-1.git3e0ff12
changelog:
  - Resolves: #1584429 - drop capabilities when running a container as non-root
  - bump to v0.6.1
  - built podman commit 3e0ff12
  - built conmon from cri-o commit 1c0c3b0
  - drop containernetworking-plugins subpackage, it's now split out into a standalone
  package


author: Lokesh Mandvekar <lsm5@redhat.com> - 0.8.1-2.git6b4ab2a
changelog:
  - bump to v0.8.1
  - use %go{build,generate} instead of go build and go generate
  - update go deps to use scl-ized builds
  - No need for Makefile patch for python installs


author: Lokesh Mandvekar <lsm5@redhat.com> - 0.8.2-1.dev.git8b2d38e
changelog:
  - Resolves: #1614710 - podman search name includes registry
  - bump to v0.8.2-dev
  - built libpod commit 8b2d38e
  - built conmon from cri-o commit acc0ee7


author: Lokesh Mandvekar <lsm5@redhat.com> - 0.8.4-1.git9f9b8cf
changelog:
  - bump to v0.8.4
  - built commit 9f9b8cf
  - upstream username changed from projectatomic to containers
  - use containernetworking-plugins >= 0.7.3-5


author: Lokesh Mandvekar <lsm5@redhat.com> - 0.10.1.3-1.gitdb08685
changelog:
  - Resolves: #1640298 - update vendored buildah to allow building when there are
  running containers
  - bump to v0.10.1.3
  - built podman commit db08685


author: Lokesh Mandvekar <lsm5@redhat.com> - 0.10.1.3-5.gitdb08685
changelog:
  - Resolves: #1625384 - keep BR: device-mapper-devel but don't build with it
  - not having device-mapper-devel seems to have brew not recognize %{_unitdir}


author: Lokesh Mandvekar <lsm5@redhat.com> - 0.11.1.1-1.git594495d
changelog:
  - Resolves: #1636230 - build with FIPS enabled golang toolchain
  - bump to v0.11.1.1
  - built commit 594495d


author: Frantisek Kluknavsky <fkluknav@redhat.com> - 1.0.0-1.git82e8011
changelog:
  - rebase to v1, yay!
  - rebase conmon to 9b1f0a08285a7f74b21cc9b6bfd98a48905a7ba2
  - Resolves:#1623282
  - python interface removed, moved to https://github.com/containers/python-podman/


author: Jindrich Novy <jnovy@redhat.com> - 1.0.0-4.git921f98f
changelog:
  - fix "CVE-2020-10696 buildah: crafted input tar file may lead to local file overwriting during image build process"
  - Resolves: #1819429


author: Jindrich Novy <jnovy@redhat.com> - 1.6.4-3
changelog:
  - merge podman-manpages with podman package and put man pages for
    podman-remote to its dedicated subpackage
  Resolves: #1788539


author: Jindrich Novy <jnovy@redhat.com> - 1.6.4-5
changelog:
  - fix "Podman support for FIPS Mode requires a bind mount inside the container"
  - Resolves: #1804193


author: Jindrich Novy <jnovy@redhat.com> - 1.6.4-6
changelog:
  - fix "CVE-2020-1726 podman: incorrectly allows existing files in volumes to be overwritten by a container when it is created"
  - Resolves: #1801572


author: Jindrich Novy <jnovy@redhat.com> - 1.6.4-8
changelog:
  - fix "[FJ8.2 Bug]: [REG]The "--group-add" option of "podman create" doesn't function."
  - Resolves: #1808705


author: Jindrich Novy <jnovy@redhat.com> - 1.6.4-9
changelog:
  - update fix for "podman (1.6.4) rhel 8.1 no route to host from inside container"
  - Resolves: #1806899


author: Jindrich Novy <jnovy@redhat.com> - 1.6.4-5
changelog:
  - fix "Podman support for FIPS Mode requires a bind mount inside the container"
  - Resolves: #1804195


author: Jindrich Novy <jnovy@redhat.com> - 1.6.4-8
changelog:
  - fix "[FJ8.2 Bug]: [REG]The "--group-add" option of "podman create" doesn't function."
  - Resolves: #1808707


author: Jindrich Novy <jnovy@redhat.com> - 1.6.4-9
changelog:
  - update fix for "podman (1.6.4) rhel 8.1 no route to host from inside container"
  - Resolves: #1806901


author: Jindrich Novy <jnovy@redhat.com> - 1.6.4-11
changelog:
  - fix "CVE-2020-10696 buildah: crafted input tar file may lead to local file overwriting during image build process"
  - Resolves: #1817747


author: Jindrich Novy <jnovy@redhat.com> - 1.6.4-11
changelog:
  - fix "CVE-2020-10696 buildah: crafted input tar file may lead to local file overwriting during image build process"
  - Resolves: #1819391


author: Jindrich Novy <jnovy@redhat.com> - 1.6.4-13
changelog:
  - fix "podman 1.6.4 is not honouring  --security-opt when --privileged is passed"
  - Resolves: #1846364


author: Jindrich Novy <jnovy@redhat.com> - 1.6.4-19
changelog:
  - fix "podman can not create user inside of container" regression introduced by
    patch for CVE-2021-20188
  - Related: #1920381


author: Petr Lautrbach <plautrba@redhat.com> - 2.8-16.1
changelog:
  - semanage: move valid_types initialisations to class constructors
  - semanage: import sepolicy only when it's needed
  - sepolicy: Add sepolicy.load_store_policy(store)
  - semanage: Start exporting "ibendport" and "ibpkey" entries


author: Petr Lautrbach <plautrba@redhat.com> - 2.9-4
changelog:
  - semanage: Do not use default s0 range in "semanage login -a" (#1554360)
  - gui: Fix remove module in system-config-selinux (#1748763)


author: Vit Mojzis <vmojzis@redhat.com> - 2.9-5
changelog:
  - fixfiles: Fix "verify" option (#1647532)
  - semanage: Improve handling of "permissive" statements (#1417455)
  - semanage: fix moduleRecords.customized()
  - semanage: Add support for DCCP and SCTP protocols (#1563742)


author: Marek Kasik <mkasik@redhat.com> - 0.66.0-19
changelog:
  - Constrain number of cycles in rescale filter
  - Compute correct coverage values for box filter
  - Resolves: #1688418


author: Marek Kasik <mkasik@redhat.com> - 0.66.0-25
changelog:
  - Check whether input is RGB in PSOutputDev::checkPageSlice()
  - also when using "-optimizecolorspace" flag
  - Resolves: #1697576


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 0.4.8-4
changelog:
  - specfile cleanup according to Fedora Packaging Guidelines
  - ghostscript parts removed from specfile


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:3.3.1-10
changelog:
  - Release bump and rebuild for relengs to be able to ship postfix-pcre,
    postfix-cdb, postfix-sqlite
    Resolves: rhbz#1745321


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.2-1
changelog:
  - Initial Red Hat Linux packaging, based on spec file from
    Simon J Mudd <sjmudd@pobox.com>
  - Changes from that:
    - Set up chroot environment in triggers to make sure we catch glibc errata
    - Remove some hacks to support building on all sorts of distributions at
      the cost of specfile readability
    - Remove postdrop group on deletion


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.3-1
changelog:
  - 1.1.3, TLS 0.8.3
  - Fix updating
  - Don't run the statistics cron job
  - remove requirement on perl Date::Calc


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.3-2
changelog:
  - listen on 127.0.0.1 only by default (#60071)
  - Put config samples in %{_docdir}/%{name}-%{version} rather than
    /etc/postfix (#60072)
  - Some spec file cleanups


author: Nalin Dahyabhai <nalin@redhat.com> 1.1.3-3
changelog:
  - adjust the default postfix-files config file to match the alternatives setup
    by altering the arguments passed to post-install in the %install phase
    (otherwise, it might point to sendmail's binaries, breaking it rather rudely)
  - adjust the post-install script so that it silently uses paths which have been
    modified for use with alternatives, for upgrade cases where the postfix-files
    configuration file isn't overwritten
  - don't forcefully strip files -- that's a build root policy
  - remove hard requirement on openldap, library dependencies take care of it
  - redirect %postun to /dev/null
  - don't remove the postfix user and group when the package is removed


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.4-1
changelog:
  - 1.1.4
  - TLS 0.8.4
  - Move postalias run from %post to init script to work around
    anaconda being broken.


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Fixed missing smtpd.conf file for SASL support and included SASL Postfix
    Red Hat HOWTO (#62505).
  - Included SASL2 support patch (#68800).


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - fix shell in /etc/passwd (#68373)
  - fix documentation in /etc/postfix (#65858)
  - Provides: /usr/bin/newaliases (#66746)
  - fix autorequires by changing /usr/local/bin/perl to /usr/bin/perl in a
    script in %doc (#68852), although I don't think this is necessary anymore


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - upgrade to release 2.0.6
  - remove chroot as this is now the preferred installation according to Wietse Venema, the postfix author


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - upgrade to new 2.0.11 upstream release
  - fix authentication problems
  - rewrite SASL documentation
  - upgrade to use SASL version 2
  - Fix bugs 75439, 81913 90412, 91225, 78020, 90891, 88131


author: John Dennis <jdennis@finch.boston.redhat.com> 2:2.0.16-3
changelog:
  - add zlib-devel build prereq, fixes bug 112822
  - remove copy of resolve.conf into chroot jail, fixes bug 111923


author: John Dennis <jdennis@finch.boston.redhat.com> 2:2.0.16-4
changelog:
  - remove mysqlclient prereq, fixes bug 101779
  - remove md5 verification override, this fixes bug 113370. Write parse-postfix-files
    script to generate explicit list of all upstream files with ownership, modes, etc.
    carefully add back in all other not upstream files, files list is hopefully
    rock solid now.


author: John Dennis <jdennis@porkchop.devel.redhat.com>
changelog:
  - revert back to v1 of sasl because LDAP still links against v1 and we can't 
  - bump revision for build
    have two different versions of the sasl library loaded in one load image at
    the same time. How is that possible? Because the sasl libraries have different 
    names (libsasl.so & libsasl2.so) but export the same symbols :-(
    Fixes bugs 115249 and 111767


author: John Dennis <jdennis@porkchop.devel.redhat.com>
changelog:
  - set sasl back to v2 for mainline, this is good for fedora and beyond,
    for RHEL3, we'll branch and set set sasl to v1 and turn off ipv6


author: John Dennis <jdennis@finch.boston.redhat.com> 2:2.0.18-1
changelog:
  - bring source up to upstream release 2.0.18
  - include pflogsumm, fixes bug #68799
  - include smtp-sink, smtp-source man pages, fixes bug #118163


author: John Dennis <jdennis@redhat.com> 2:2.0.18-4
changelog:
  - remove version from pflogsumm subpackage, it was resetting the
    version used in the doc directory, fixes bug 119213


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.1-3.1
changelog:
  - fixed directory permissions in %doc (#125406)
  - fixed missing spool dirs (#125460)
  - fixed verify problem for aliases.db (#125461)
  - fixed bogus upgrade warning (#125628)
  - more spec file cleanup


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.4-1
changelog:
  - new version 2.1.4
  - new ipv6 and tls+ipv6 patches: 1.25-pf-2.1.4
  - new pfixtls-0.8.18-2.1.3-0.9.7d patch


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.5-2
changelog:
  - switched over to system aliases file and database in /etc/ (#117661)
  - new reuires and buildrequires for setup >= 2.5.36-1


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.5-2.2
changelog:
  - automated postalias call in init script
  - removed postconf call from spec file: moved changes into patch


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.5-5.1
changelog:
  - fixed open relay bug in postfix ipv6 patch: new version 1.26 (#146731)
  - fixed permissions on doc directory (#147280)
  - integrated fixed fqdn patch from Joseph Dunn (#139983)


author: Thomas Woerner <twoerner@redhat.com> 2:2.2.0-1
changelog:
  - new version 2.2.0
  - cleanup of spec file: removed external TLS and IPV6 patches, removed 
    smtp_sasl_proto patch
  - dropped samples directory till there are good examples again (was TLS and
    IPV6)
  - v2.2.0 fixes code problems: #132798 and #137858


author: Thomas Woerner <twoerner@redhat.com> 2:2.2.5-2.1
changelog:
  - replaced postconf and postalias call in initscript with newaliases (#156358)
  - fixed initscripts messages (#155774)
  - fixed build problems when sasl is disabled (#164773)
  - fixed pre-definition of mailbox_transport lmtp socket path (#122910)


author: Thomas Woerner <twoerner@redhat.com> 2:2.2.10-1
changelog:
  - new version 2.2.10
  - added option LDAP_DEPRECATED to support deprecated ldap functions for now
  - fixed build without pflogsumm support (#188470)


author: Thomas Woerner <twoerner@redhat.com> 2:2.3.2-1
changelog:
  - new version 2.3.2 with major upstream fixes:
    - corrupted queue file after a request to modify a short message header
    - panic after spurious Milter request when a client was rejected
    - maked the Milter more tolerant for redundant "data cleanup" requests
  - applying pflogsumm-conn-delays-dsn-patch from postfix tree to pflogsumm


author: Thomas Woerner <twoerner@redhat.com> 2:2.3.6-1
changelog:
  - new version 2.3.6
  - limiting SASL mechanisms to plain login for sasl with saslauthd (#175259)
  - dropped usage of ed in the install stage


author: Thomas Woerner <twoerner@redhat.com> 2:2.4.3-1
changelog:
  - new stable version 2.4.3
  - enabled mysql support (rhbz#185515)
  - dropped build requirements for gawk, ed and sed


author: Thomas Woerner <twoerner@redhat.com> 2:2.4.3-2
changelog:
  - diabled mysql support again (rhbz#185515)
  - added support flag for PostgreSQL build (rhbz#180579)
    Ben: Thanks for the patch
  - Fixed remaining rewiew problems (rhbz#226307)


author: Thomas Woerner <twoerner@redhat.com> 2:2.4.5-2
changelog:
  - made init script lsb conform (#243286, rhbz#247025)
  - added link to postfix sasl readme into Postfix-SASL-RedHat readme


author: Thomas Woerner <twoerner@redhat.com> 2:2.4.5-3
changelog:
  - fixed multilib conflict for makedefs.out: rename to makedefs.out-%{_arch}
    (rhbz#342941)
  - enabled mysql support


author: Thomas Woerner <twoerner@redhat.com> 2:2.4.6-1
changelog:
  - new verison 2.4.6
  - added virtual server(smtp) provide (rhbz#380631)
  - enabling IPv6 support (rhbz#197105)
  - made the MYSQL and PGSQL defines overloadable as build argument


author: Thomas Woerner <twoerner@redhat.com> 2:2.5.1-2
changelog:
  - fixed fix for enabling IPv6 support (rhbz#437024)
  - added new postfix data directory (rhbz#437042)


author: Thomas Woerner <twoerner@redhat.com> 2:2.5.1-3
changelog:
  - fixed postfix privilege problem with symlinks in the mail spool directory
    (CVE-2008-2936) (rhbz#459101)


author: Miroslav Lichvar <mlichvar@redhat.com> 2:2.5.5-2
changelog:
  - enable Large file support on 32-bit archs (#428996)
  - fix mailq(1) and newaliases(1) man pages (#429501)
  - move pflogsumm and qshape to -perl-scripts subpackage (#467529)
  - update pflogsumm to 1.1.1
  - fix large-fs patch
  - drop open_define patch
  - add -Wno-comment to CFLAGS


author: Miroslav Lichvar <mlichvar@redhat.com> 2:2.5.6-1
changelog:
  - update to 2.5.6 (#479108)
  - rebuild /etc/aliases.db only when necessary (#327651)
  - convert doc files to UTF-8


author: Miroslav Lichvar <mlichvar@redhat.com> 2:2.6.1-1
changelog:
  - update to 2.6.1
  - move non-config files out of /etc/postfix (#490983)
  - fix multilib conflict in postfix-files (#502211)
  - run chroot-update script in init script (#483186)
  - package examples (#251677)
  - provide all alternatives files
  - suppress postfix output in post script


author: Miroslav Lichvar <mlichvar@redhat.com> 2:2.6.5-3
changelog:
  - fix init script LSB compliance (#528151)
  - update pflogsumm to 1.1.2
  - require Date::Calc for pflogsumm (#536678)
  - fix some rpmlint warnings


author: Miroslav Lichvar <mlichvar@redhat.com> 2:2.7.0-2
changelog:
  - follow guidelines for alternatives (#570801)
  - move sasl config to /etc/sasl2 (#574434)
  - drop sasl v1 support
  - remove unnecessary requirements
  - use bcond macros


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:2.8.7-2
changelog:
  - Introduce systemd unit file, thanks to Jóhann B. Guðmundsson <johannbg@hi.is>
    Resolves: rhbz#718793


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:2.10.0-2
changelog:
  - Fixed systemd error message regarding chroot-update, patch provided
    by John Heidemann <johnh@isi.edu>
    Resolves: rhbz#917463


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:2.11.0-1
changelog:
  - New version
    Resolves: rhbz#1054116
  - Updated / de-fuzzified patches
  - Compiled with USE_LDAP_SASL if both "ldap" and "sasl" options are enabled.
    Patch provided by Davide Principi <davide.principi@nethesis.it>
    Resolves: rhbz#1052958


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:3.0.0-1
changelog:
  - New version
    Resolves: rhbz#1190797
  - Defuzzified alternatives, config, large-fs patches
  - Rebased files patch


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:3.0.0-4
changelog:
  - Switched to dynamically loaded libraries and database plugins
  - Enabled PostgreSQL support by default
  - Added SQLite support
  - Added CDB support


author: Dodji Seketeli <dodji@seketeli.org> - 2:3.0.1-2
changelog:
  - Avoid spurious errors by re-setting errno to 0 before calling that readdir()
    Resolves: rhbz#1204139
  - Add a patch to support compiling on Linux 4.*


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:3.0.2-1
changelog:
  - New version
    Resolves: rhbz#1245183
  - Dropped linux4 patch (not needed)
  - Defuzzified alternatives patch


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:3.0.3-4
changelog:
  - Increased alternatives priority, it is desirable to prefer postfix
    to e.g. ssmtp
    Resolves: rhbz#1255131


author: Ondřej Lysoněk <olysonek@redhat.com> - 2:3.1.1-3
changelog:
  - Preserve timestamps during 'make install'
    Patch provided by Robert Scheck
    Resolves: rhbz#1307064


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:3.1.2-1
changelog:
  - New version
    Resolves: rhbz#1370899
  - Dropped timestamps patch (upstream rejected)
  - Fixed minor whitespace problem


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:3.2.0-1
changelog:
  - New version
    Resolves: rhbz#1427860
  - De-fuzzified patches
  - Dropped timestamps patch (upstreamed)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:3.2.1-1
changelog:
  - New version
    Resolves: rhbz#1460474
  - Updated pflogsumm to 1.1.5
  - Fixed warnings if IPv6 addresses are in the log
    Resolves: rhbz#1384871


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:3.2.5-1
changelog:
  - New version
    Resolves: rhbz#1539465
  - Switched to libnsl2, because nsl is no longer provided by glibc
  - Macro workaround not to check symbols during compilation, because
    plugins have symbols which are unresolvable during compile time


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:3.3.1-1
changelog:
  - New version
    Resolves: rhbz#1548222
  - Updated libnsl2 library and header paths
    Resolves: rhbz#1543928
  - Updated license for dual licensing


author: Pavel Raiskup <praiskup@redhat.com> - 10.4-4
changelog:
  - new postgresql-setup, the %postgresql_tests* macros now start
    the build-time server on random port number


author: Patrik Novotný <panovotn@redhat.com> - 10.15-1
changelog:
  - Rebase to upstream release 10.15
    Resolves: rhbz#1898212
    Resolves: rhbz#1898340
    Resolves: rhbz#1901568


author: Patrik Novotný <panovotn@redhat.com> - 12.5-1
changelog:
  - Rebase to upstream release 12.5
    Resolves: rhbz#1901556
    Resolves: rhbz#1898222
    Resolves: rhbz#1898328


author: Petr Kubat <pkubat@redhat.com> - 9.6.4-1
changelog:
  - update to 9.6.4 per release notes:
    https://www.postgresql.org/docs/9.6/static/release-9-6-4.html


author: Pavel Raiskup <praiskup@redhat.com> - 9.6.5-1
changelog:
  - update to 9.6.5 per release notes:
    https://www.postgresql.org/docs/9.6/static/release-9-6-5.html


author: Pavel Raiskup <praiskup@redhat.com> - 9.6.8-1
changelog:
  - update to 9.6.8 per release notes:
    https://www.postgresql.org/docs/9.6/static/release-9-6-8.html
    https://www.postgresql.org/docs/9.6/static/release-9-6-7.html
    https://www.postgresql.org/docs/9.6/static/release-9-6-6.html
  - rebase to new postgresql-setup 6.0 version, to fix CVE-2017-15097


author: Honza Horak <hhorak@redhat.com> - 9.6.19-1
changelog:
  - Rebase to 9.6.19
    Also fixes: CVE-2019-10208, CVE-2020-14350, CVE-2019-10130
    Resolves: #1741490
    Resolves: #1867111
    Resolves: #1845074


author: Patrik Novotný <panovotn@redhat.com> - 9.6.20-1
changelog:
  - Rebase to upstream release 9.6.20
    Resolves: rhbz#1901563
    Resolves: rhbz#1898218
    Resolves: rhbz#1898334


author: Patrik Novotný <panovotn@redhat.com> - 9.6.20-1
changelog:
  - Rebase to upstream release 9.6.20
    Resolves: rhbz#1901564
    Resolves: rhbz#1898217
    Resolves: rhbz#1898333


author: Tom Lane <tgl@redhat.com> 8.1.405-1jpp
changelog:
  - Split postgresql-jdbc into its own SRPM (at last).
  - Build it from source.  Add support for gcj compilation.


author: Tom Lane <tgl@redhat.com> 9.0.801-3
changelog:
  - Switch to non-GCJ build, since GCJ is now deprecated in Fedora
  Resolves: #722247
  - Use %{_mavendepmapfragdir} to fix FTBFS with maven 3


author: Tom Lane <tgl@redhat.com> 9.0.801-4
changelog:
  - Add BuildRequires: java-1.6.0-openjdk-devel to ensure we have recent JDK
  Related: #730588
  - Remove long-obsolete minimum versions from BuildRequires


author: Tom Lane <tgl@redhat.com> 9.1.901-3
changelog:
  - Change BuildRequires: java-1.6.0-openjdk-devel to just java-devel.
    As of 9.1-901, upstream has support for JDBC4.1, so we don't have to
    restrict to JDK6 anymore, and Fedora is moving to JDK7
  Resolves: #796580


author: Pavel Raiskup <praiskup@redhat.com> - 9.2.1002-4
changelog:
  - don't use removed macro %add_to_maven_depmap (#992816)
  - lint: trim-lines, reuse %{name} macro, fedora-review fixes
  - merge cleanup changes by Stano Ochotnicky


author: Pavel Raiskup <praiskup@redhat.com> - 9.4.1209-2
changelog:
  - update to latest release version, thanks to Pavel Kajaba, Michael Simacek and
    Vladimir Sitnikov for big help
  - fix Provides, remove old compatibility hacks


author: gil cattaneo <puntogil@libero.it> 9.4.1209-5
changelog:
  - fix postgresql-jdbc.jar symlink using javapackages macros
  - adapt to current guideline
  - install doc and license file in parent-poms sub package
  - simplified runselftest check


author: Pavel Raiskup <praiskup@redhat.com> - 9.4.1210-1
changelog:
  - new release, rhbz#1374106, per announcement:
    https://www.postgresql.org/message-id/CAB=Je-FzuqwDXLTT62VfzvTUhR4QTfLjmw2D5QfgaykDkhW7nw@mail.gmail.com


author: Pavel Raiskup <praiskup@redhat.com> - 9.4.1212-1
changelog:
  - new release, rhbz#1377317, per announcement:
    https://www.postgresql.org/message-id/CAB=Je-FjbvQ_MmAGmhZ-1sSMnodpjr9Uz6Q=faxqCxOvpRO-UQ@mail.gmail.com


author: Pavel Raiskup <praiskup@redhat.com> - 42.2.0-1
changelog:
  - rebase to the latest upstream release
  - nicer github source urls
  - sync with upstream spec
  - use new postgresql testing macros (rawhide only)
  - depend on postgresql-test-rpm-macros


author: Pavel Raiskup <praiskup@redhat.com> - 09.06.0310-1
changelog:
  - rebase to latest upstream version, per release notes:
    https://odbc.postgresql.org/docs/release.html


author: Pavel Raiskup <praiskup@redhat.com> - 09.06.0500-1
changelog:
  - update to new upstream release, per:
    https://www.postgresql.org/message-id/20170905143318.95448B4C411@winpg.jp


author: Pavel Raiskup <praiskup@redhat.com> - 10.00.0000-1
changelog:
  - update to new upstream release, per announcement:
    https://www.postgresql.org/message-id/20171013143455.9D0E5B4C412%40winpg.jp


author: Pavel Raiskup <praiskup@redhat.com> - 10.01.0000-1
changelog:
  - update to new upstream release, per announcement:
    https://www.postgresql.org/message-id/20171227144219.0ABC4B4C417%40winpg.jp


author: Pavel Raiskup <praiskup@redhat.com> - 10.02.0000-1
changelog:
  - build against libpq-devel and postgresql-test-rpm-macros
  - update to new upstream release, per announcement:
    https://www.postgresql.org/message-id/20180330143925.88CEDB40E51%40winpg.jp


author: Pavel Raiskup <praiskup@redhat.com> - 10.03.0000-1
changelog:
  - update: new upstream release, per announcement:
    https://www.postgresql.org/message-id/20180519131632.8E59CB40E51%40winpg.jp


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.9-1
changelog:
  - New version
    Resolves: rhbz#1454519
  - Dropped pthreads-cflags-fix and potential-segfaults patches (both upstreamed)
  - Updated source URL


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.9-7
changelog:
  - Added support for Intel GLK platforms (by intel-glk-support patch)
  - Added support for Intel CNL-U/Y platforms (by intel-cnluy-support patch)
  - Fixed problem with some C-states overwriting others
    (by cstates-rewrite-fix patch)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.9-8
changelog:
  - Use intel_cpu only if APERF MSR is supported, it fixes powertop on KVM
    (by intel-cpu-check-aperf patch)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.11-1
changelog:
  - New version
    Resolves: rhbz#1716721
  - Changed source to github and bootstraps sources
  - Dropped cstates-rewrite-fix, intel-glk-support, intel-cnluy-support,
    intel-cpu-check-aperf patches (all upstreamed)
  - Added bash completion


author: Jaroslav Škarvada <jskarvad@redhat.com> - 1.9.0-1
changelog:
  - New version
  - Dropped pptpsetup-mppe, vector-remove-fix, and call-use-after-free-fix
    patches (all upstreamed)
  - Dropped loading of nf_conntrack_pptp kernel module which was workaround and
    according to upstream only hides real problems


author: Rex Dieter <rdieter@fedoraproject.org> - 11.1-14
changelog:
  - use %make_build, %make_install
  - enable systemd socket/service activation on f28+ (and disable autospawn)


author: Rex Dieter <rdieter@fedoraproject.org> - 11.1-18
changelog:
  - manually package sockets.target.wants/pulseaudio.socket to help
    handle socket activation on upgrades


author: Wim Taymans <wtaymans@redhat.com> - 11.1-23
changelog:
  - Add xauthority parameter to X11 modules
  - Fix compilation against newer alsa-lib
  - Resolves: rhbz#1723065


author: David Cantrell <dcantrell@redhat.com> - 3.16.5-1
changelog:
  - Localization fixes
    Resolves: rhbz#1690008
  - Prevent traceback in ksverdiff
    Resolves: rhbz#1693305


author: Brian C. Lane <bcl@redhat.com> - 3.16.8-1
changelog:
  - Updated upstream urls in pykickstart.spec (bcl)
  - docs/versionremoved: fix sphinx import path (lars)
  - Add support for the ZIPL Secure Boot for RHEL8 (#1753312) (vponcova)
    Resolves: rhbz#1753312


author: Brian C. Lane <bcl@redhat.com> - 3.16.9-1
changelog:
  - Update versionremoved sphinx extension (bcl)
    Related: rhbz#1776378
  - Add the rhsm command (mkolman)
    Resolves: rhbz#1776378
    Related: rhbz#1748281


author: Brian C. Lane <bcl@redhat.com> - 3.16.10-1
changelog:
  - New translations
    Resolves: rhbz#1754980
  - Update zanata client package name (bcl)
  - Update pykickstart.pot (bcl)


author: Tomas Orsava <torsava@redhat.com> - 1.3.7-21
changelog:
  - Disabled docs because the docs build config is not ported to Python 3 and
    thus cannot be built with Python 3 version of Sphinx


author: Lumír Balhar <lbalhar@redhat.com> - 1.3.7-27
changelog:
  - Remove nosetest-3 executable/manpage. This will be provided by python3 module.
  - Resolves: rhbz#1615727


author: John Dennis <jdennis@redhat.com> - 1.0.1-1
changelog:
  * Add TLS 1.3 cipher suites.

    * ssl_cipher_info.py now attempts to enable TLS 1.3.

    * Fix build issue in setup.py. python-nss can now be build
      as Python wheel, e.g. `pip wheel -w dist .`

    * The following constants were added:

      - ssl.TLS_AES_128_GCM_SHA256
      - ssl.TLS_AES_256_GCM_SHA384
      - ssl.TLS_CHACHA20_POLY1305_SHA256


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.0.1-5
changelog:
  - Python 2 binary package renamed to python2-nss
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: <jdennis@redhat.com> - 1.0.1-10
changelog:
  - Move documentation generator from epydoc to Sphinx autodoc
  - Modify py2/py3 build logic to comply with new guidelines


author: Jindrich Novy <jnovy@redhat.com> - 1.2.0-0.2.gitd0a45fe
changelog:
  - revert update to 1.6.0 due to new python3-pbr dependency which
    is not in RHEL
  - Related: RHELPLAN-25139


author: Tomas Orsava <torsava@redhat.com> - 2.7.5-5
changelog:
  - Require python2-psycopg2 instead of python-psycopg2 from the
    python2-psycopg2-debug subpackage
  - Resolves: rhbz#1628242


author: mahailiang <mahailiang@openanolis.org> - 2.7.5-7.0.1
changelog:
  - Mark _test_external_close as expected failure
  - Sync https://git.centos.org/rpms/python-psycopg2/tree/c8-stream-2.7


author: Tomas Orsava <torsava@redhat.com> - 3.6.1-6
changelog:
  - BuildRequire the python36-devel package when building for the python36 module
  - BuildRequire also python36-rpm-macros as part of the python36 module build


author: Tomas Orsava <torsava@redhat.com> - 3-29
changelog:
  - Switch the Python 3 executable to /usr/libexec/platform-python
  - Update macros using pip or easy_install to be invoked through the main
    executable


author: Tomas Orsava <torsava@redhat.com> - 3-30
changelog:
  - Explicitly enable Python 2 when invoking Python 2 macros
    See: https://url.corp.redhat.com/rhel8-py2


author: Tomas Orsava <torsava@redhat.com> - 3-31
changelog:
  - Remove RHEL_ALLOW_PYTHON2_FOR_BUILD=1 from build and install macros,
    as that is where the user needs to set it themself


author: Tomas Orsava <torsava@redhat.com> - 3-32
changelog:
  - Merging: (Tue Jul 10 2018 Tomas Orsava <torsava@redhat.com> - 3-32)
    - Fix %py_byte_compile macro: when invoked with a Python 2 binary it also
      mistakenly ran py3_byte_compile
  - Merging: (Tue Jul 03 2018 Miro Hrončok <mhroncok@redhat.com> - 3-31)
    - Add %python3_platform useful for PYTHONPATH on arched builds
  - Merging: (Mon Jun 18 2018 Jason L Tibbitts III <tibbs@math.uh.edu> - 3-30)
    - Add %pypi_source macro, as well as %__pypi_url and
      %_pypi_default_extension.
  - Merging: (Wed Apr 18 2018 Miro Hrončok <mhroncok@redhat.com> - 3-29)
    - move macros.pybytecompile from python3-devel


author: Tomas Orsava <torsava@redhat.com> - 3-33
changelog:
  - macros.pybytecompile: Detect Python version through sys.version_info instead
    of guessing from the executable name


author: Miro Hrončok <mhroncok@redhat.com> - 3-37
changelog:
  - Workaround leaking buildroot PATH in 
  python_binary="%1"
  buildroot_path="%2"
  bytecode_compilation_path=".${buildroot_path/#$RPM_BUILD_ROOT}"
  failure=0
  pushd $RPM_BUILD_ROOT
  find $bytecode_compilation_path -type f -a -name "*.py" -print0 | xargs -0 $python_binary -O -m py_compile || failure=1
  find $bytecode_compilation_path -type f -a -name "*.py" -print0 | xargs -0 $python_binary -m py_compile || failure=1
  popd
  test $failure -eq 0
  - Resolves: rhbz#1644455


author: Miro Hrončok <mhroncok@redhat.com> - 15.1.0-19
changelog:
  - Use wheels from RPM packages (rhbz#1659550) (rhbz#1659551)
  - Fail with a warning on Python versions < 2.7


author: Charalampos Stratakis <cstratak@redhat.com> - 2.7.16-7
changelog:
  - Disallow control chars in http URLs
  - Fixes CVE-2019-9740 and CVE-2019-9947
  Resolves: rhbz#1703539 and rhbz#1704367


author: Miro Hrončok <mhroncok@redhat.com> - 2.7.16-11
changelog:
  - Use RPM built wheels of pip and setuptools in ensurepip instead of our rewheel patch
  - Require python2-setuptools from python2-devel to prevent packaging errors
  Resolves: rhbz#1718398


author: Tomas Orsava <torsava@redhat.com> - 2.7.16-12
changelog:
  - Adding FIPS compliance to Python 2 in RHEL8:
    - Updated patch 146 with a new version of the FIPS patch
    - Patch 169 has been removed, obsoleted by the updated patch 146
  Resolves: rhbz#1734126


author: Charalampos Stratakis <cstratak@redhat.com> - 0.28.1-6
changelog:
  - Replace GCC's attribute optimize("Os") by the better supported and similar (cold).
  - Resolves: rhbz#1658621


author: Tomas Orsava <torsava@redhat.com> - 0.8.0-5
changelog:
  - Hardcode requires on python36-devel for the python36 module. This will have
    to be modified when python37 is added.


author: Petr Viktorin <pviktori@redhat.com> - 1.16.3-2
changelog:
  - Allow Python 2 for build
    See: https://hurl.corp.redhat.com/rhel8-py2

  - Skip tests on Python 2 (python2-pytest is being removed)


author: Iryna Shcherbina <ishcherb@redhat.com> - 2.7.14-2
changelog:
  - Fix ambiguous Python 2 dependencies declarations
    (See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)


author: Tomas Orsava <torsava@redhat.com> - 2.7.15-2
changelog:
  - Modify for building on RHEL8
  - Disable the tests, because the linkchecker package isn't available in RHEL8
  - Resolves: rhbz#1656048


author: Tomas Orsava <torsava@redhat.com> - 2.7.15-3
changelog:
  - Modify for prebuilding and deploying on RHEL8
  - Rename the info page to python2
  - Resolves: rhbz#1656048


author: Tomas Orsava <torsava@redhat.com> - 0.14-11
changelog:
  - Remove python2 executables - they are functionally identical to the python3
    executables, so we're only going to ship them in the python3 subpackage
  - Resolves: rhbz#1656477


author: Petr Viktorin <pviktori@redhat.com> - 1.0.2-10
changelog:
  - Skip python2 tests to allow removing python2-unittest2 from the distribution
  - Fix workaround for allowing Python 2 for build


author: Petr Viktorin <pviktori@redhat.com> - 1.0.2-11
changelog:
  - Disable the python3 subpackage
    Functionality of funcsigs is available in Python 3's inspect module.


author: Petr Viktorin <pviktori@redhat.com> - 2.0.0-9
changelog:
  - Drop dependency on python3-funcsigs
    (funcsigs functionality is in the Python 3 standard library -- inspect)
  - Drop dependency on python2-unittest2
    (Not available in the distro)

  - Fix python2 requires names


author: Charalampos Stratakis <cstratak@redhat.com> - 1.14.2-12
changelog:
  - Set proper build flags for https://fedoraproject.org/wiki/Changes/Python_Extension_Flags
  - Resolves: rhbz#1715036


author: Charalampos Stratakis <cstratak@redhat.com> - 9.0.3-15
changelog:
  - Use the system level root certificate instead of the one bundled in certifi
  Resolves: rhbz#1659551


author: Lumír Balhar <lbalhar@redhat.com> - 9.0.3-16
changelog:
  - Add four new patches for CVEs in bundled urllib3 and requests
  CVE-2018-20060, CVE-2019-11236, CVE-2019-11324, CVE-2018-18074
  Resolves: rhbz#1649153
  Resolves: rhbz#1700824
  Resolves: rhbz#1702473
  Resolves: rhbz#1643829


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.3.1-9
changelog:
  - Python 2 binary package renamed to python2-pluggy
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Petr Viktorin <pviktori@redhat.com> - 3.4.2-6
changelog:
  - Don't use timeout in tests
    https://bugzilla.redhat.com/show_bug.cgi?id=1592940
  - Add missing BuildRequires


author: Petr Viktorin <pviktori@redhat.com> - 3.4.2-7
changelog:
  - Remove BuildRequires on python2-hypothesis, a circular dependency
  - Explicitly BuildRequire python-attrs


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 2017.2-3
changelog:
  - Python 2 binary package renamed to python2-pytz
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Matěj Cepl <mcepl@redhat.com> - 2017.2-6
changelog:
  - remove test_tzinfo.PicklingTest.testRoundtrip which fails with our
    system-wide timezone database (#1497572)


author: Iryna Shcherbina <ishcherb@redhat.com> - 3.12-9
changelog:
  - Fix ambiguous Python 2 dependency declarations
    (See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)


author: Tomas Orsava <torsava@redhat.com> - 2.18.4-6
changelog:
  - Skip all tests needing httpbin: httpbin has too many dependencies to be
    shipped in RHEL just for build-time package tests


author: Nikola Forró <nforro@redhat.com> - 1.0.0-13
changelog:
  - Force preprocessing of Fortran sources to make annobin record proper flags
  - Resolves: rhbz#1624172


author: Tomas Orsava <torsava@redhat.com> - 39.0.1-4
changelog:
  - This package might be built with the non-modular python2 package from RHEL8
    buildroot and thus we need to enable it


author: mahailiang <mahailiang@openanolis.org> - 39.0.1-12.0.1
changelog:
  - Fix wheel tests compatibility
  - Sync https://git.centos.org/rpms/python2-setuptools/tree/c8-stream-2.7


author: Tomas Orsava <torsava@redhat.com> - 1.24.2-1
changelog:
  - Rebased to 1.24.2 to fix CVE-2019-11324
  - Added patches for CVE-2019-11236 (AKA CVE-2019-9740)
  - Resolves: rhbz#1706765 rhbz#1706762


author: Tomas Orsava <torsava@redhat.com> - 1.9.3-5
changelog:
  - Dropped test dependency on python3-pexpect since the tests weren't being
    run, and python3-pexpect is being dropped from RHEL8 as part of component
    trimming. If tests are needed in the future, they can be run by QE.


author: Kalev Lember <klember@redhat.com> - 1.15.2-1
changelog:
  - Update to 1.15.2
  - Switch to new upstream at https://github.com/pygobject/pycairo
  - Switch to distutils build system
  - Tighten subpackage deps with the _isa macro
  - Rename Python 2 package to python2-cairo
  - Enable Python 3 support


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.1-26
changelog:
  - Python 2 binary package renamed to python2-cpio
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Brian C. Lane <bcl@redhat.com> - 0.12.2-4
changelog:
  - Add upstream changes from 0.12.4
    Resolves: rhbz#1585318
  - Add TestJSON to the gating test from upstream
    Related: rhbz#1585318


author: Kevin Fenzi <kevin@scrye.com> - 1:0.999999999-1
changelog:
  - Update to 0.999999999. Fixes bug #1431378 and #1305828
  - Security fix for CVE-2016-9909, CVE-2016-9910. Fixes bug #1402706 and #1402707


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.5.1-9
changelog:
  - Python 2 binary package renamed to python2-humanize
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Miroslav Suchý <msuchy@redhat.com> 1.10.1-1
changelog:
  - create python3-hwdata subpackage
  - Bumping package versions for 1.9
  - %defattr is not needed since rpm 4.4


author: Miroslav Suchý <miroslav@suchy.cz> 2.3.4-1
changelog:
  - run pylint in %check
  - require hwdata in python 3 package too (jdobes@redhat.com)
  - implement PNP interface
  - errors in usb.ids should not be fatal
  - change upstream url in setup.py


author: Miroslav Suchý <msuchy@redhat.com> 2.3.5-1
changelog:
  - create python2-hwdata subpackage
  - use dnf instead of yum in README
  - remove rhel5 compatibilities from spec


author: Orion Poplawski <orion@cora.nwra.com> - 2.5.1-3
changelog:
  - Enable python3 builds for EPEL (bug #1395653)
  - Ship python2-jsonschema
  - Modernize spec
  - Use %license


author: Petr Viktorin <pviktori@redhat.com> - 2.6.0-4
changelog:
  - Drop the Python2 subpackage
    https://bugzilla.redhat.com/show_bug.cgi?id=1584189
  - Use sys.executable rather than unversioned "python" in tests


author: Christian Heimes <cheimes@redhat.com> - 3.0.0-0.2.b2
changelog:
  - New upstream release 3.0.0b2 (RHBZ #1496470)
  - Require OpenLDAP with fix for NSS issue (see #1520990)


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.0.6-5
changelog:
  - Python 2 binary package renamed to python2-mako
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Petr Viktorin <pviktori@redhat.com> - 1.0.6-9
changelog:
  - Make python-beaker an optional dependency
  - Add missing python_provide for python3-mako
  - Conditionalize the Python 2 subpackage
  - Modernize the specfile


author: Petr Viktorin <pviktori@redhat.com> - 1.0.6-11
changelog:
  - Add back the Python 2 subpackage (temporarily, for mesa build)
    https://bugzilla.redhat.com/show_bug.cgi?id=1569193


author: Petr Viktorin <pviktori@redhat.com> - 1.0.6-13
changelog:
  - Disable the Python 2 subpackage again
    https://bugzilla.redhat.com/show_bug.cgi?id=1590397
  - Fix the Python2 workaround


author: Martin Kolman <mkolman@redhat.com> - 0.41-1
changelog:
  - Make sure the Meh window has focus even if a dialog is displayed (mkolman)
  - Run pylint as part of "make ci". (clumens)
  - Add a new makefile target that does everything needed for jenkins. (clumens)
  - Fix the other pylint-discovered errors. (clumens)
  - Use isinstance instead of type. (clumens)
  - Fix all the places we're redefining something. (clumens)
  - Don't use [] as the default argument in a method. (clumens)
  - Take care of exception-related pylint messages. (clumens)
  - Get rid of all the unused variable warnings. (clumens)
  - Get rid of all unused and wildcard imports. (clumens)
  - Add pocketlint support to python-meh. (clumens)
  - Use gi.require_version for Gtk import (vtrefny)


author: Martin Kolman <mkolman@redhat.com> - 0.42-1
changelog:
  - Add tests and ChangeLog to MANIFEST.in (vtrefny)
  - Fix clicking on buttons on error pop-up doesn't work (#1250942) (vtrefny)
  - Add Makefile to MANIFEST.in (vtrefny)
  - Add archive target to Makefile (vtrefny)
  - Add .gitignore (vtrefny)


author: Martin Kolman <mkolman@redhat.com> - 0.44-1
changelog:
  - Some rpmlint fixes (mkolman)
  - Remove the removal of the eintr checker, which has been removed (dshea)


author: Martin Kolman <mkolman@redhat.com> - 0.47-1
changelog:
  - Make sure gettext returns strings not bytes (mkolman)
  - Spec: Move TUI back to main package (awilliam)


author: Martin Kolman <mkolman@redhat.com> - 0.47.2-1
changelog:
  - Require the Python interpreter directly instead of using the package name (torsava)
    Related: rhbz#1619153


author: Lubos Uhliarik <luhliari@redhat.com> - 4.6.4-4
changelog:
  - Resolves: #1779705 - python3-mod_wsgi: Remove the Provides and Obsoletes for
    the name `mod_wsgi`


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.7.19-4
changelog:
  - Python 2 binary package renamed to python2-netaddr
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Tomas Orsava <torsava@redhat.com> - 1:1.14.3-5
changelog:
  - Switch runtime dependency of the python3-numpy-f2py package from
    python3-devel (that's now buildroot-only) to python3-libs-devel
  Resolves: rhbz#1610863


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 2.0.0-8
changelog:
  - Python 2 binary package renamed to python2-ordered-set
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Sandro Mani <manisandro@gmail.com> - 1.7.8-3.20130210gite09ff61
changelog:
  - Really remove -fno-strict-aliasing
  - Place comment on how to retreive source just above the Source0 line


author: Sandro Mani <manisandro@gmail.com> - 1.7.8-4.20130305git7866759
changelog:
  - Update to latest git snapshot
  - 0001-Cast-hash-table-values-to-unsigned-long.patch now upstream
  - Pillow-1.7.8-selftest.patch now upstream


author: Sandro Mani <manisandro@gmail.com> - 2.0.0-2.git2e88848
changelog:
  - Update to latest git
  - Remove python-pillow-disable-test.patch, gcc is now fixed
  - Add python-pillow_tempfile.patch to prevent a temporary file from getting packaged


author: Sandro Mani <manisandro@gmail.com> - 2.0.0-6.gitd1c6db8
changelog:
  - Update to latest git
  - python-pillow_quantization.patch now upstream
  - python-pillow_endianness.patch now upstream
  - Add subpackage for ImageQt module, with correct dependencies
  - Add PyQt4 and numpy BR (for generating docs / running tests)


author: Toshio Kuratomi <toshio@fedoraproject.org> - 2.0.0-7.gitd1c6db8
changelog:
  - Remove Obsoletes in the python-pillow-qt subpackage. Obsoletes isn't
    appropriate since qt support didn't exist in the previous python-pillow
    package so there's no reason to drag in python-pillow-qt when updating
    python-pillow.


author: Sandro Mani <manisandro@gmail.com> - 2.1.0-1
changelog:
  - Update to 2.1.0
  - Run tests in builddir, not installroot
  - Build python3-pillow docs with python3
  - python-pillow_endian.patch upstreamed


author: Sandro Mani <manisandro@gmail.com> - 2.1.0-4
changelog:
  - Add patch to fix incorrect PyArg_ParseTuple tuple signature, fixes rhbz#962091 and rhbz#988767.
  - Renable webp support on bigendian arches


author: Sandro Mani <manisandro@gmail.com> - 2.3.0-1
changelog:
  - Update to 2.3.0
  - Build with doc disabled to break circular python-pillow -> python-sphinx -> python pillow dependency


author: Sandro Mani <manisandro@gmail.com> - 2.4.0-2
changelog:
  - Enable Jpeg2000 support
  - Enable webp support also on s390* archs, bug #962091 is now fixed
  - Add upstream patch for ghostscript detection


author: Sandro Mani <manisandro@gmail.com> - 2.7.0-1
changelog:
  - Update to 2.7.0
  - Drop sane subpackage, is in python-sane now
  - Fix python3 headers directory
  - Drop Obsoletes: python3-pillow on python3-pillow-qt


author: Petr Viktorin <pviktori@redhat.com> - 5.1.1-2
changelog:
  - Remove the python2 version of docs
  - Remove Qt subpackages
  - Drop dependency on python2-olefile (breaking MicImagePlugin.py, FpxImagePlugin)


author: Petr Viktorin <pviktori@redhat.com> - 5.1.1-3
changelog:
  - Remove the Python 2 subpackage
  - Remove the libimagequant dependency
    The imagequant library was only used to support a non-default image
    quantization mode.


author: Lumír Balhar <lbalhar@redhat.com> - 5.1.1-7
changelog:
  - Add upstream patch to solve build-time warning
  - Move patches to dist-git
  - Resolves: rhbz#1639348


author: Tomas Orsava <torsava@redhat.com> - 9.0.3-5
changelog:
  - Split part of the python3-pip package into platform-python-pip
  - python3-pip will only contain binaries in /usr/bin
  - Resolves: rhbz#1638836


author: Lumír Balhar <lbalhar@redhat.com> - 9.0.3-6
changelog:
  - python3-pip requires python36 and obsoletes previous version
    where python3- and platform-python- were in one package
  - Resolves: rhbz#1638836


author: Tomas Orsava <torsava@redhat.com> - 9.0.3-10
changelog:
  - Bump the NVR so it's higher than previous builds of python3-pip that have
    mistakenly gotten into the python27 module build when we were dealing with an
    MBS filtering problem. See BZ#1650568.
  - Resolves: rhbz#1638836


author: Victor Stinner <vstinner@redhat.com> - 9.0.3-11
changelog:
  - Prevent removing of the system packages installed under /usr/lib
    when pip install -U is executed. Patch by Michal Cyprian.
    Resolves: rhbz#1626408.


author: Miro Hrončok <mhroncok@redhat.com> - 9.0.3-13
changelog:
  - Use the system level root certificate instead of the one bundled in certifi
  - Resolves: rhbz#1655255


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.7.2-12
changelog:
  - Python 2 binary package renamed to python2-prettytable
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Lubomír Sedlář <lsedlar@redhat.com> 1.6-1
changelog:
  - Add a new image type dvd-debuginfo (lsedlar@redhat.com)
  - Add Tito release for F26 (lsedlar@redhat.com)


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.7-3
changelog:
  - Python 2 binary package renamed to python2-productmd
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Lubomír Sedlář <lsedlar@redhat.com> 1.8-1
changelog:
  - Report better error on parsing invalid JSON (#95) (lubomir.sedlar@gmail.com)
  - Python 2 binary package renamed to python2-productmd (zbyszek@in.waw.pl)
  - Sync spec file with Fedora (#94) (lubomir.sedlar@gmail.com)


author: Lubomír Sedlář <lsedlar@redhat.com> 1.9-1
changelog:
  - add updates-testing as a valid compose type (#96)
    (dgilmore@fedoraproject.org)
  - Update tito configuration (lsedlar@redhat.com)


author: Lubomír Sedlář <lsedlar@redhat.com> 1.10-1
changelog:
  - Drop Fedora 25 build (lsedlar@redhat.com)
  - Drop RHEL compatibility from spec (lsedlar@redhat.com)
  - Use more relaxed release type checks (lholecek@redhat.com)
  - Fix parse release id with dash in type (lsedlar@redhat.com)
  - Add tests for parse_release_id() (lholecek@redhat.com)
  - Update dependencies to include Python version (#97)


author: Tomas Orsava <torsava@redhat.com> - 2.7.4-3
changelog:
  - Revert switching Python 3 subpackages to the python3X- prefix
  - Switch only the requires for python3-devel/debug to the python36-prefix:
    the rest of the packages in the python36 collection will have the python3
    prefix to be unified with the Python 3 packages for Platform-Python


author: Mahailiang <mahailiang@openanolis.org> - 2.7.5-7.0.1
changelog:
  - Fix test_external_close_async check error
  - Sync from https://github.com/psycopg/psycopg2 (version 2.8)


author: Rob Crittenden <rcritten@redhat.com> - 0.3.4-1
changelog:
  - Update to upstream release 0.3.4 (#1485669)
  - Update modules to 0.1.2
  - Patch to fixed crash at SequenceOf native decoder


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 2.25.3-3
changelog:
  - Python 2 binary package renamed to python2-pyatspi
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Kamil Dudka <kdudka@redhat.com> - 7.43.0-15
changelog:
  - enable vsftpd-based tests
  - run the test-suite for Python 3 only
  - do not disable TLS-SRP test because it is now supported by OpenSSL in Fedora


author: Kamil Dudka <kdudka@redhat.com> - 7.43.0.2-4
changelog:
  - fix populating list of decoded strings (#1792213)
  - fix programming mistakes detected by static analyzers (#1666003)


author: Martin Kolman <mkolman@redhat.com> - 0.6.0-3
changelog:
  - add patch for DTD fix
  - add patch with support for asynchronous calls (vponcova)
  - add patch with support for transformation between D-Bus errors and exceptions (vponcova)


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1:3.11.0-6
changelog:
  - Python 2 binary package renamed to python2-pyparted
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 3.1.1-5
changelog:
  - Python 2 binary package renamed to python2-pyserial
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Petr Viktorin <pviktori@redhat.com> - 3.4.2-3
changelog:
  - Use python3-sphinx to build the documentation
  - Skip the `non_ascii_paste_text` test, which needs internet access


author: Tomas Orsava <torsava@redhat.com> - 0.1.14-5.git7dea353
changelog:
  - Conditionalize the Python 2 subpackage
  - Don't build the Python 2 subpackage on EL > 7 and Fedora > 28


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.0.0-6
changelog:
  - Python 2 binary package renamed to python2-pyusb
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 5.1-8
changelog:
  - Python 2 binary package renamed to python2-qrcode
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Tomas Orsava <torsava@redhat.com> - 5.1-12
changelog:
  - Require platform-python-setuptools instead of python3-setuptools
  - Resolves: rhbz#1654457, rhbz#1654458


author: Tomas Orsava <torsava@redhat.com> - 4.14.0-1
changelog:
  - Rebase to rpm 4.14.0 final (http://rpm.org/wiki/Releases/4.14.0)
  - Re-synchronize version/release macros with the rpm Fedora package


author: Tomas Orsava <torsava@redhat.com> - 5-5
changelog:
  - Create major-version provides only on major Python versions (2.7, 3.6)
  - Fix an extra parenthesis in python.attr
  - Resolves: rhbz#1776941


author: Miro Hrončok <mhroncok@redhat.com> - 0.5.5-2
changelog:
  - Subpackage python2-rpmfluff has been removed
    See https://fedoraproject.org/wiki/Changes/Mass_Python_2_Package_Removal


author: Jan Hutar <jhutar@redhat.com> - 0.5.6-1
changelog:
  - dshea: Add a add_manpage function
  - dshea: Sanitize the base directory name
  - dshea: Support subpackage scriptlets
  - dshea: Allow file directives to be added to symlinks
  - dshea: Use valid images for the test PNG and GIF data


author: Jan Hutar <jhutar@redhat.com> - 0.5.7-1
changelog:
  - Remove python 2 subpackage
  - ksrot: RPM now returns all string data as surrogate-escaped utf-8 strings
  - bcl: Tests fixes
  - bcl: pylint warnings
  - Better version of the check as advised by pmatilai


author: Jiri Konecny <jkonecny@redhat.com> - 0.3-1
changelog:
  - Remove merge commits from changelog (jkonecny)
  - Fix bad input processing for list containers (jkonecny)
  - Rename quit callback and add args there. (jkonecny)
  - Add tests for new container feature (jkonecny)
  - List containers take max width if not specified (jkonecny)
  - Remove leftover print in containers parsing input (jkonecny)


author: Jiri Konecny <jkonecny@redhat.com> - 0.4-1
changelog:
  - Screen scheduling is moved to ScreenHandler (jkonecny)
  - Remove merge commits from changelog (jkonecny)


author: Jiri Konecny <jkonecny@redhat.com> - 0.5-1
changelog:
  - Fix exception in Screen input caused infinite loop (jkonecny)
  - Add test if app is initialized (jkonecny)
  - Redraw on first scheduled screen (#1487326) (jkonecny)
  - Redraw after YesNoDialog modal window close (jkonecny)


author: Jiri Konecny <jkonecny@redhat.com> - 0.6-1
changelog:
  - Implement the force quit all loops feature (jkonecny)
  - Improved GLib event loop testing (jkonecny)
  - Handle GLib event loop exceptions better (jkonecny)
  - Support for GLib event loop (jkonecny)
  - Wrap exceptions from handlers as ExceptionSignal (jkonecny)
  - Only highest priority events are processed in one iteration (jkonecny)
  - Move parts from MainLoop to AbstractEventLoop (jkonecny)
  - MainLoop won't wait in busy loop anymore (jkonecny)
  - Don't block loop when waiting on user input (jkonecny)
  - Fix user input lock (jkonecny)


author: Jiri Konecny <jkonecny@redhat.com> - 0.7-1
changelog:
  - Fix crash when container callback is not set (jkonecny)
  - Add EntryWidget to show item title and value (jkonecny)
  - Add GetPasswordInputScreen for getting passwords (jkonecny)
  - UIScreen can have hidden input (jkonecny)
  - Move getpass func inside locks (jkonecny)
  - Implement GetInputScreen (jkonecny)
  - Do not print new line with empty container (jkonecny)
  - Add no_separator to UIScreen (jkonecny)
  - Fix HelpScreen title (jkonecny)
  - Remove original classes from GLib tests (jkonecny)
  - Fix test case name (jkonecny)
  - Move tests to subfolder (jkonecny)
  - Move base widgets as second example (jkonecny)
  - Add example with basic widgets usage (jkonecny)
  - Improve README.md (jkonecny)
  - Improve example starting script (jkonecny)
  - Add glib loop example (jkonecny)
  - Add prefixes to examples to impress difficulty (jkonecny)
  - Add comments to the examples (jkonecny)
  - Update examples to use new features (jkonecny)


author: Jiri Konecny <jkonecny@redhat.com> - 0.8-1
changelog:
  - Test clean-up (jkonecny)
  - Move and rename force_quit loop (jkonecny)
  - Add dump screen stack method (jkonecny)


author: Jiri Konecny <jkonecny@redhat.com> - 1.0-1
changelog:
  - Fix docs based on the new PROCESSED feature (jkonecny)
  - Use new PROCESS_AND* in examples (jkonecny)
  - Add tests for PROCESSED_AND_{CLOSE|REDRAW} (jkonecny)
  - Use new PROCESSED_AND_{CLOSE|REDRAW} in advanced widgets (jkonecny)
  - Support PROCESSED_AND_CLOSE UserInputState (jkonecny)
  - Rename UserInputResult to UserInputAction (jkonecny)
  - Support PROCESSED_AND_REDRAW (jkonecny)
  - Fix link to the documentation in README (jkonecny)
  - Add link to the documentation (jkonecny)
  - Write documentation for Simpleline (jkonecny)
  - Disable pylint error for doc copyright variable (jkonecny)
  - Add new example used in the documentation (jkonecny)
  - Mock modules for readthedocs (jkonecny)
  - Do a small fixes to improve documentation (jkonecny)
  - Get version from the spec file (jkonecny)
  - Add documentation skeleton (jkonecny)


author: Jiri Konecny <jkonecny@redhat.com> - 1.1-1
changelog:
  - Add global configuration initialize test (jkonecny)
  - Use default password function from GlobalConfiguration (jkonecny)
  - Add tests for GlobalConfiguration class (jkonecny)
  - Move default width to GlobalConfiguration class (jkonecny)
  - Add GlobalConfiguration object (jkonecny)
  - Fix a missing article in docs. (jkonecny)
  - Add tests for UIScreen get_user_input method (jkonecny)
  - Only InputManager is used to get input in UIScreen (jkonecny)
  - Move emit of InputReadySignal to InputRequest (jkonecny)
  - Get only last input on concurrent input (jkonecny)
  - Add concurrency tests for InputHandler (jkonecny)
  - Add requester source to the InputHandler (#1557472) (jkonecny)
  - Use InputManager as screen helper not in ScreenScheduler (#1557472) (jkonecny)
  - Add test to check InputThreadManager after initialization (jkonecny)
  - Reinitialize InputThreadManager when app is initialized (jkonecny)
  - Input requests are now handled by InputThreadManager (jkonecny)
  - Remove io_manager property from ScreenScheduler (jkonecny)
  - Rename io_manager to input_manager (jkonecny)
  - Change IOManager to InputManager (jkonecny)
  - Move draw from IOManager to ScreenScheduler (jkonecny)
  - Separate password input to PasswordInputHandler (jkonecny)
  - Add DEFAULT_WIDTH constant (jkonecny)
  - Add tests for InputHandler (jkonecny)
  - Replace get_input_without_check by new property (jkonecny)
  - Separate input to a new module (jkonecny)


author: Scott Talbert <swt@techie.net> - 0.7-0.1.94664ddd46a6
changelog:
  - Switched to Jurko fork of suds
  - Modernize python packaging, build python3 package
  - Fixed bogus changelog dates


author: Scott Talbert <swt@techie.net> - 0.7-0.2.94664ddd46a6
changelog:
  - Applied patch from Haikel Guemar to support building on CentOS w/o Python 3
  - Move BRs to subpackages, support python- vs python2- BRs on non-Fedora


author: Petr Viktorin <pviktori@redhat.com> - 0.7-0.8.94664ddd46a6
changelog:
  - Don't build the python2 subpackage in rhel>7
    https://bugzilla.redhat.com/show_bug.cgi?id=1567165


author: Patsy Griffin Franklin <pfrankli@redhat.com> - 2018.2-7
changelog:
  - Selectively build python2 or python3 based on current version.
  - Don't use pathfix.py as it fails prep on RHEL when building on systems
    do not have python installled.


author: Paul Wouters <paul@xelerance.com> - 1.0.2-4
changelog:
  - Fix CFLAGS getting lost in build
  - Don't enable interface-automatic:yes because that
    causes unbound to listen on 0.0.0.0 instead of 127.0.0.1


author: Paul Wouters <paul@xelerance.com> - 1.0.2-5
changelog:
  - Only call ldconfig in -libs package
  - Move configure into build section
  - devel subpackage should only depend on libs subpackage


author: Paul Wouters <paul@xelerance.com> - 1.1.0-1
changelog:
  - Updated to version 1.1.0
  - Updated unbound.conf's statistics options and remote-control
    to work properly for munin
  - Added unbound-munin package
  - Generate unbound remote-control  key/certs on first startup
  - Required ldns is now 1.4.0


author: Adam Tkac <atkac redhat com> - 1.1.0-2
changelog:
  - unbound-1.1.0-log_open.patch
    - make sure log is opened before chroot call
    - tracked as http://www.nlnetlabs.nl/bugs/show_bug.cgi?id=219
  - removed /dev/log and /var/run/unbound and /etc/resolv.conf from
    chroot, not needed
  - don't mount files in chroot, it causes problems during updates
  - fixed typo in default config file


author: Paul Wouters <paul@xelerance.com> - 1.1.0-3
changelog:
  - Remove the chroot, obsoleted by SElinux
  - Add additional munin plugin links supported by unbound plugin
  - Move configuration directory from /var/lib/unbound to /etc/unbound
  - Modified unbound.init and unbound.conf to account for chroot changes
  - Updated unbound.conf with new available options
  - Enabled dns-0x20 protection per default


author: Paul Wouters <paul@xelerance.com> - 1.1.1-6
changelog:
  - Added scandir patch for trusted-keys-file: option, which
    is used to load multiple dnssec keys in bind file format


author: Paul Wouters <paul@xelerance.com> - 1.1.1-7
changelog:
  - Modified scandir patch to silently fail when wildcard matches nothing
  - Patch to allow unbound-checkconf to find empty wildcard matches


author: Paul Wouters <paul@xelerance.com - 1.2.0-1
changelog:
  - Updated to 1.2.0
  - Added dependancy on minimum SSL for CVE-2008-5077
  - Added dependancy on bc for unbound-munin
  - Added minimum requirement of libevent 1.4.5. Crashes with older versions
    (note: libevent is stale in EL-4 and not in EL-5, needs fixing there)
  - Removed dependancy on selinux-policy (will get used when available)
  - Enable options as per draft-wijngaards-dnsext-resolver-side-mitigation-00.txt
  - Enable unwanted-reply-threshold to mitigate against a Kaminsky attack
  - Enable val-clean-additional to drop addition unsigned data from signed
    response.
  - Removed patches (got merged into upstream)


author: Paul Wouters <paul@xelerance.com> - 1.3.0-1
changelog:
  - Updated to 1.3.0
  - Added unbound-python sub package. disabled for now
  - Patch from svn to fix DLV lookups
  - Patches from svn to detect wrong truncated response from BIND 9.6.1 with
    minimal-responses)
  - Added Default-Start and Default-Stop to unbound.init
  - Re-enabled --enable-sha2
  - Re-enabled glob.patch


author: Paul Wouters <paul@xelerance.com> - 1.4.1-2
changelog:
  - Removed dependancy for dnssec-conf
  - Added ISC DLV key (formerly in dnssec-conf)
  - Fixup old DLV locations in unbound.conf file via %post
  - Fix parent child disagreement handling and no-ipv6 present [svn r1953]


author: Paul Wouters <paul@xelerance.com> - 1.4.2-1
changelog:
  - Updated to 1.4.2 
  - Updated unbound.conf with new options
  - Enabled pre-fetching DNSKEY records (DNSSEC speedup)
  - Enabled re-fetching popular records before they expire
  - Enabled logging of DNSSEC validation errors


author: Paul Wouters <paul@xelerance.com> - 1.4.5-3
changelog:
  - Disable do-ipv6 per default - causes severe degradation on non-ipv6 machines
    (see comments in inbound.conf)


author: Paul Wouters <paul@xelerance.com> - 1.4.8-1
changelog:
  - Updated to 1.4.8
  - Enable root key for DNSSEC
  - Fix unbound-munin to use proper file (could cause excessive logging)
  - Build unbound-python per default
  - Disable gost as Fedora/EPEL does not allow ECC and has mangled openssl


author: Paul Wouters <paul@xelerance.com> - 1.4.11-1
changelog:
  - Updated to 1.4.11
  - removed integrated CVE patch
  - updated stock unbound.conf for new options introduced


author: Paul Wouters <paul@xelerance.com> - 1.4.12-2
changelog:
  - Fix for python module load in the server (Tom Hendrikx)
  - No longer enable --enable-debug as it causes degraded  performance
    under load.


author: Paul Wouters <paul@xelerance.com> - 1.4.13-1
changelog:
  - Upgraded to 1.4.13
  - Removed merged in pythonmod patch
  - Added EDNS1480 patch to fix unbound on broken EDNS/UDP networks
  - Fix python to go into sitearch instead of sitelib


author: Paul Wouters <paul@cypherpunks.ca> - 1.4.14-1
changelog:
  - Upgraded to 1.4.14 for CVE-2011-4528 / VU#209659
  - SSL-wrapped query support for dnssec-trigger
  - EDNS handling changes
  - Removed integrated EDNS patches
  - Disabled use-caps-for-id, GoDaddy domains now break on it
  - Enabled new harden-below-nxdomain


author: Paul Wouters <pwouters@redhat.com> - 1.4.16-2
changelog:
  - Don't ghost the directory (rhbz#788805)
  - Patch for unbound to support unbound-control forward_zone
    (needed for openswan in XAUTH mode)


author: Paul Wouters <pwouters@redhat.com> - 1.4.16-3
changelog:
  - Since the daemon links to the libs staticly, add Requires:
    (this is rhbz#745288)
  - Package up streamtcp as unbound-streamtcp (for monitoring)


author: Paul Wouters <pwouters@redhat.com> - 1.4.17-5
changelog:
  - Fix for unbound crasher (upstream bug #452)
  - Support libunbound functions in man pages and place in -devel


author: Paul Wouters <pwouters@redhat.com> - 1.4.18-1
changelog:
  - Updated to 1.4.18 (FIPS related fixes mostly)
  - Removed patches that were merged in upstream
  - Added comment to root.key


author: Paul Wouters <pwouters@redhat.com> - 1.4.18-5
changelog:
  - Patch to allow wildcards in include: statements
  - Add directories /etc/unbound/keys.d,conf.d,local.d with
    example entries
  - Added /etc/unbound/root.anchor, maintained by unbound-anchor
    which is installed as monthly cron and PreExec in systemd config
    (root.key is unused, but left installed in case people depend on it)
  - Native systemd (simple) and /etc/sysconfig/unbound support
  - Run unbound-checkconf in PreExec
  - Moved trust anchor related files to unbound-libs, as they can
    be used without the daemon.
  - sub packages now depends on base package of same arch
  - Build munin package as noarch
  - unbound-anchor moved to unbound-libs package. It is needed
    to update the root.anchor key file.


author: Paul Wouters <pwouters@redhat.com> - 1.4.18-6
changelog:
  - Patch to ensure stube-zone's aren't lost when using dnssec-triggerd
  - added unbound-munin.README file


author: Paul Wouters <pwouters@redhat.com> - 1.4.20-4
changelog:
  - Updated to 1.4.20
  - Build with full RELRO (not use -z,relro but with -z,relo,-z,now)
  - Fixup man page for unbound-control-setup
  - unbound.service should start before nss-lookup.target (rhbz#919955)
  - Removed patch for rhbz#888759 merged in upstream
  - Move root.anchor to /var/lib/unbound to make selinux policy easier for updating (rhbz#896599/rhbz#891008)
  - Move cronjob for root.anchor from unbound to unbound-libs, require crontabs
  - /etc/unbound (and all) should be owned by unbound-libs (rhbz#909691)
  - Remove Obsolete/Provides for dnssec-conf which was last seen in f13
  - Ensure any unbound-anchor failure in post is ignored


author: Paul Wouters <pwouters@redhat.com> - 1.4.20-5
changelog:
  - Fix cron job syntax (rhbz#951725)
  - Use install -p to prevent .rpmnew files that are identical to originals


author: Paul Wouters <pwouters@redhat.com> - 1.4.20-12
changelog:
  - Enable round-robin (with noths() patch)
  - Change cron and systemd service to use root.key, not root.anchor


author: Tomas Hozza <thozza@redhat.com> - 1.4.20-14
changelog:
  - remove missing unbound-rootkey.service from post/preun/postun sections
  - don't hardcode hardening flags, let hardened build macro handles it


author: Paul Wouters <pwouters@redhat.com> - 1.4.21-1
changelog:
  - Updated to 1.4.21, 
  - Enabled new max-udp-size: 3072 (so ANY isc.org won't fit)
  - Removed patched merged in by upstream
  - Enable statistics-cumulative for munin-plugin
  - Added outgoing-port-avoid: 0-32767 conformant to SElinux restrictions
  - Updated unbound.conf


author: Paul Wouters <pwouters@redhat.com> - 1.5.1-1
changelog:
  - Update to 1.5.1 for CVE-2014-8602 (rhbz#1172066)
  - Removed unbound-aarch64.patch which was merged upstream
  - Don't require autotools for non snapshots or run autoreconf


author: Paul Wouters <pwouters@redhat.com> - 1.5.3-1
changelog:
  - Updated to 1.5.3 which is a bugfix on 1.5.2 for sighup handling
  - Updated to 1.5.2 which fixes DNSSEC validation with different
    trust anchors upstream, local-zone has a new keyword 'inform'


author: Tomas Hozza <thozza@redhat.com> - 1.5.3-2
changelog:
  - Fix FTBFS (#1206129)
  - Build python3-unbound and python-unbound bindings for Python 3 and 2 (#1188080)


author: Tomas Hozza <thozza@redhat.com> - 1.5.3-3
changelog:
  - migrate cronjob to systemd timer unit (#1177285)
  - change the period for unbound-anchor from monthly to daily (#1180267)
  - Thanks to Tomasz Torcz <ttorcz@fedoraproject.org> for the initial patch


author: Paul Wouters <pwouters@redhat.com> - 1.5.3-4
changelog:
  - Fixup scriptlets causing systemctl: command not found
  - Resolves rhbz#1219587 Error in PREIN scriptlet in rpm package unbound-libs


author: Tomas Hozza <thozza@redhat.com> - 1.5.3-5
changelog:
  - unbound.service now Wants unbound-anchor.timer
  - unbound-anchor man page moved to the unbound-libs


author: Tomas Hozza <thozza@redhat.com> - 1.5.3-7
changelog:
  - Add option for maximum negative cache TTL (#1229599)
  - Use low maximum negative cache TTL (5 sec) (#1229596)


author: Tomas Hozza <thozza@redhat.com> - 1.5.4-2
changelog:
  - Start unbound-anchor.timer only on new installations
  - Rename root.anchor to root.key in %post section


author: Tomas Hozza <thozza@redhat.com> - 1.5.4-3
changelog:
  - Added ExecReload section to unbound.service (#1195785)
  - Removed After syslog.target since it is not needed any more


author: Tomas Hozza <thozza@redhat.com> - 1.5.5-1
changelog:
  - New upstream release 1.5.5 (#1269137)
  - Removed the anchor update from %post section of -libs subpackage (#1269137#c2)


author: Paul Wouters <pwouters@redhat.com> - 1.5.7-1
changelog:
  - Update to 1.5.7
  - Enable query minimalization for enhanced DNS query privacy
  - Enable nxdomain hardening to assist with query minimalization and SBLs
  - Updated default unbound.conf for new features from upstream.


author: Paul Wouters <pwouters@redhat.com> - 1.5.8-1
changelog:
  - Update to 1.5.8 (rhbz#1313831) which incorporates rhbz#1294339 patch
  - Updated unbound.conf with new upstream options
  - Enabled ip-transparent: yes (see rhbz#1291449)


author: Paul Wouters <pwouters@redhat.com> - 1.5.10-1
changelog:
  - Updated to 1.5.10 (better TCP handling, bugfixes)
  - Install pkgconfig file in -devel package
  - Updated unbound.conf


author: Paul Wouters <pwouters@redhat.com> - 1.6.4-1
changelog:
  - Updated to 1.6.4 full release, patch to allow missing ipsechook
  - Resolves rhbz#1465575 unbound fails to start up, complains about missing ipsecmod-hook


author: Paul Wouters <pwouters@redhat.com> - 1.6.4-4
changelog:
  - Rebuilt with KSK2017 added to root.key and root.anchor
  - Remove noreplace for root key files. We can only improve these files over local copies


author: Paul Wouters <pwouters@redhat.com> - 1.6.6-1
changelog:
  - Resolves: rhbz#1483572 unbound-1.6.6 is available
  - Resolves: rhbz#1465575 unbound fails to start up, complains about missing ipsecmod-hook (edit)


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.6.7-2
changelog:
  - Python 2 binary package renamed to python2-unbound
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Paul Wouters <pwouters@redhat.com> - 1.6.8-1
changelog:
  - Resolves rhbz#1483572 unbound-1.6.8 is available
  - Resolves rhbz#1507049 CVE-2017-15105 unbound: Improper validation of wildcard synthesized NSEC records
  - Resolves rhbz#1536518 CVE-2017-15105 unbound: Improper validation of wildcard synthesized NSEC records [fedora-all]


author: Petr Menšík <pemensik@redhat.com> - 1.7.0-5
changelog:
  - Require gcc and make on build
  - Remove group, simplify systemd requires
  - Simplify building with single python version, make python3 primary


author: Anna Khaitovich <akhaitov@redhat.com> - 1.7.3-11
changelog:
  - Fix amplifying an incoming query into a large number of queries directed to a target
  - Resolves: rhbz#1839177 (CVE-2020-12662), rhbz#1840262 (CVE-2020-12663)


author: Tomas Orsava <torsava@redhat.com> - 0.5.1-6
changelog:
  - Require the Python interpreter directly instead of using the package name
  - Resolves: rhbz#1633609


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.11.10-7
changelog:
  - Python 2 binary package renamed to python2-werkzeug
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Tomas Orsava <torsava@redhat.com> - 3.6.6-13
changelog:
  - Provide the name `python3`, `python3-devel` and `python3-debug` from their
    respective packages to provide a sane default for Python 3
  - Provide the name `python36-modular-devel` from python36-rpm-macros so it's
    easier to remember and describe in documentation
  - Sync version-release with the python3 component
  - Resolves: rhbz#1632637


author: Tomas Orsava <torsava@redhat.com> - 3.6.6-14
changelog:
  - Set a special Provides tag that advertises the `python36` package as an
    alternative to the non-existing `python` package
  - Resolves: rhbz#1633561


author: Tomas Orsava <torsava@redhat.com> - 3.6.6-15
changelog:
  - Don't list /usr/bin/python as a ghost file so `yum install /usr/bin/python`
    doesn't install this package
  - Resolves: rhbz#1633534


author: Tomas Orsava <torsava@redhat.com> - 3.6.6-18
changelog:
  - Remove the Python source tarball as it's not being used in this symlink
    component
  - Create a new explanatory README
  - Resolves: rhbz#1654867


author: Tomas Orsava <torsava@redhat.com> - 3.8.0-2
changelog:
  - Converting to RHEL8
  - Changes from Fedora
    - Removed gpgverifycation as the tool used in Fedora is not present in RHEL8
    - Added versioned pathfix.py and 2to3 scripts into bindir
    - Depend on python3-rpm-generators always, because they run on Python 3.6
  - Added python38-rpm-macros subpackage
    - Fixed py3_install_wheel macro because python38-pip does not have
      the --strip-prefix patch


author: Tomas Orsava <torsava@redhat.com> - 3.8.0-3
changelog:
  - Build Python with -fno-semantic-interposition for better performance
    https://fedoraproject.org/wiki/Changes/PythonNoSemanticInterpositionSpeedup


author: Tomas Orsava <torsava@redhat.com> - 3.8.0-6
changelog:
  - Implement alternatives for /usr/bin/python, python3 and related executables
  - Resolves: rhbz#1807041


author: Miro Hrončok <mhroncok@redhat.com> - 1.12.3-5
changelog:
  - Subpackage python2-cffi has been removed
    See https://fedoraproject.org/wiki/Changes/Mass_Python_2_Package_Removal


author: Miro Hrončok <mhroncok@redhat.com> - 3.0.4-14
changelog:
  - Subpackage python2-chardet has been removed
    See https://fedoraproject.org/wiki/Changes/Mass_Python_2_Package_Removal


author: Christian Heimes <cheimes@redhat.com> - 2.7-3
changelog:
  - Skip unit tests that fail with OpenSSL 1.1.1.d
  - Resolves: rhbz#1761194
  - Fix and simplify Python 3 packaging


author: Miro Hrončok <mhroncok@redhat.com> - 19.2.3-1
changelog:
  - Update to 19.2.3 (#1742230)
  - Drop patch that should strip path prefixes from RECORD files, the paths are relative


author: Miro Hrončok <mhroncok@redhat.com> - 3.11-6
changelog:
  - Subpackage python2-ply has been removed
    See https://fedoraproject.org/wiki/Changes/Mass_Python_2_Package_Removal


author: Tomas Orsava <torsava@redhat.com> - 2.8.4-3
changelog:
  - Fix shebang mangling
  - Don't ship the debug module, it is not needed and was not shipped in RHEL8 either


author: Christian Heimes <cheimes@redhat.com> - 2.14-18
changelog:
  - Add build dependency on cpp for unit tests
  - Add dependency on python-ply version to prevent "yacc table file version is out of date"
  - Fixes RHBZ#1668230


author: Petr Viktorin <pviktori@redhat.com> - 1.2.1-6
changelog:
  - Remove build dependency on python2-pytest-xdist and python2-pytest-timeout
  - Enable parallel tests in Python 3 %check
  - Use macros for Python interpreter in tests


author: Miro Hrončok <mhroncok@redhat.com> - 1.3.1-1
changelog:
  - Update to 1.3.1 (#1674101)
  - Drop Python 2 packages (not supported by SciPy >= 1.3)
  - Backported upstream patch for cKDTree (fixes FTBFS)


author: Lumír Balhar <lbalhar@redhat.com> - 1.3.1-3
changelog:
  - Specify LDFLAGS explicitly
  - Force preprocessing of Fortran sources to make annobin record proper flags
  - Resolves: rhbz#1778983


author: Tomas Orsava <torsava@redhat.com> - 41.6.0-1
changelog:
  - Upgrade to 41.6.0 (#1758945).
  - https://setuptools.readthedocs.io/en/latest/history.html#v41-6-0
  - Disabled a failing upstream test: https://github.com/pypa/setuptools/issues/1896


author: Miro Hrončok <mhroncok@redhat.com> - 1.25.7-2
changelog:
  - Subpackage python2-urllib3 has been removed
    See https://fedoraproject.org/wiki/Changes/Mass_Python_2_Package_Removal


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 2.12.0-95.el8
changelog:
  - kvm-virtio-gpu-block-both-2d-and-3d-rendering.patch [bz#1674324]
  - kvm-x86-Intel-AVX512_BF16-feature-enabling.patch [bz#1642541]
  - Resolves: bz#1642541
    ([Intel 8.2 Feature] qemu-kvm Enable BFloat16 data type support)
  - Resolves: bz#1674324
    (With <graphics type='spice'><gl enable='on'/>, qemu either refuses to start completely or spice-server crashes afterwards)


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 2.12.0-96.el8
changelog:
  - kvm-i386-Remove-cpu64-rhel6-CPU-model.patch [bz#1741346]
  - Resolves: bz#1741346
    (Remove the "cpu64-rhel6" CPU from qemu-kvm)


author: Miroslav Rezanina <mrezanin@redhat.com> - 2.12.0-97.el8
changelog:
  - kvm-exec-Fix-MAP_RAM-for-cached-access.patch [bz#1769613]
  - kvm-virtio-Return-true-from-virtio_queue_empty-if-broken.patch [bz#1769613]
  - kvm-usbredir-Prevent-recursion-in-usbredir_write.patch [bz#1752320]
  - kvm-xhci-recheck-slot-status.patch [bz#1752320]
  - kvm-tcp_emu-Fix-oob-access.patch [bz#1791566]
  - kvm-slirp-use-correct-size-while-emulating-IRC-commands.patch [bz#1791566]
  - kvm-slirp-use-correct-size-while-emulating-commands.patch [bz#1791566]
  - Resolves: bz#1752320
    (vm gets stuck when migrate vm back and forth with remote-viewer trying to connect)
  - Resolves: bz#1769613
    ([SEV] kexec mays hang at "[sda] Synchronizing SCSI cache " before switching to new kernel)
  - Resolves: bz#1791566
    (CVE-2020-7039 virt:rhel/qemu-kvm: QEMU: slirp: OOB buffer access while emulating tcp protocols in tcp_emu() [rhel-8.2.0])


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 2.12.0-98.el8
changelog:
  - kvm-iscsi-Avoid-potential-for-get_status-overflow.patch [bz#1794501]
  - kvm-iscsi-Cap-block-count-from-GET-LBA-STATUS-CVE-2020-1.patch [bz#1794501]
  - kvm-clean-up-callback-when-del-virtqueue.patch [bz#1708480]
  - kvm-virtio-add-ability-to-delete-vq-through-a-pointer.patch [bz#1708480]
  - kvm-virtio-reset-region-cache-when-on-queue-deletion.patch [bz#1708480]
  - kvm-virtio-net-delete-also-control-queue-when-TX-RX-dele.patch [bz#1708480]
  - Resolves: bz#1708480
    ([Q35] No "DEVICE_DELETED" event in qmp after unplug virtio-net-pci device)
  - Resolves: bz#1794501
    (CVE-2020-1711 qemu-kvm: QEMU: block: iscsi: OOB heap access via an unexpected response of iSCSI Server [rhel-8.2.0])


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 2.12.0-99.el8
changelog:
  - kvm-slirp-disable-tcp_emu.patch [bz#1791677]
  - kvm-target-i386-kvm-initialize-feature-MSRs-very-early.patch [bz#1790308]
  - Resolves: bz#1790308
    (qemu-kvm core dump when do L1 guest live migration with L2 guest running)
  - Resolves: bz#1791677
    (QEMU: Slirp: disable emulation of tcp programs like ftp IRC etc. [rhel-8])


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 2.12.0-99.el8.1
changelog:
  - kvm-util-add-slirp_fmt-helpers.patch [bz#1834477]
  - kvm-dhcpv6-use-slirp_fmt.patch [bz#1834477]
  - kvm-misc-use-slirp_fmt0.patch [bz#1834477]
  - kvm-tftp-use-slirp_fmt0.patch [bz#1834477]
  - kvm-tcp_ctl-use-slirp_fmt.patch [bz#1834477]
  - kvm-tcp_emu-fix-unsafe-snprintf-usages.patch [bz#1834477]
  - Resolves: bz#1834477
    (CVE-2020-8608 virt:rhel/qemu-kvm: QEMU: Slirp: potential OOB access due to unsafe snprintf() usages [rhel-8.2.0.z])


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 2.12.0-99.el8_2.2
changelog:
  - kvm-vnc-add-magic-cookie-to-VncState.patch [bz#1816763]
  - kvm-vnc-fix-memory-leak-when-vnc-disconnect.patch [bz#1816763]
  - Resolves: bz#1816763
    (CVE-2019-20382 virt:rhel/qemu-kvm: QEMU: vnc: memory leakage upon disconnect [rhel-8])


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 2.12.0-99.el8_2.3
changelog:
  - kvm-Drop-bogus-IPv6-messages.patch [bz#1838092 bz#1867075 bz#1870421]
  - Resolves: bz#1838092
    (CVE-2020-10756 virt:8.2/qemu-kvm: QEMU: slirp: networking out-of-bounds read information disclosure vulnerability [rhel-av-8])
  - Resolves: bz#1867075
    (CVE-2020-10756 virt:8.3/qemu-kvm: QEMU: slirp: networking out-of-bounds read information disclosure vulnerability [rhel-av-8])
  - Resolves: bz#1870421
    (CVE-2020-10756 virt:rhel/qemu-kvm: QEMU: slirp: networking out-of-bounds read information disclosure vulnerability [rhel-8.2.0.z])


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 2.12.0-99.el8_2.4
changelog:
  - kvm-usb-fix-setup_len-init-CVE-2020-14364.patch [bz#1869708]
  - Resolves: bz#1869708
    (CVE-2020-14364 qemu-kvm: QEMU: usb: out-of-bounds r/w access issue while processing usb packets [rhel-8.2.0.z])


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 2.12.0-99.el8_2.5
changelog:
  - kvm-hw-ehci-check-return-value-of-usb_packet_map.patch [bz#1920266]
  - Resolves: bz#1920266
    (CVE-2020-25723 virt:8.3/qemu-kvm: QEMU: assertion failure through usb_packet_unmap() in hw/usb/hcd-ehci.c [rhel-8.2.1.z])


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 4.2.0-40.el8
changelog:
  - kvm-redhat-link-etc-qemu-ga-fsfreeze-hook-to-etc-qemu-kv.patch [bz#1910267]
  - kvm-qga-rename-Error-parameter-to-more-common-errp.patch [bz#1910326]
  - kvm-util-Introduce-qemu_get_host_name.patch [bz#1910326]
  - kvm-qga-Use-qemu_get_host_name-instead-of-g_get_host_nam.patch [bz#1910326]
  - kvm-redhat-add-un-pre-install-systemd-hooks-for-qemu-ga.patch [bz#1910220]
  - Resolves: bz#1910267
    (There is no soft link '/etc/qemu-kvm/fsfreeze-hook')
  - Resolves: bz#1910326
    (Incorrect hostname returned by  qga command 'guest-get-host-name')
  - Resolves: bz#1910220
    (qemu-ga service still active and can work after qemu-guest-agent been removed)


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 4.2.0-41.el8
changelog:
  - kvm-udev-kvm-check-remove-the-exceeded-subscription-limi.patch [bz#1909244]
  - kvm-hw-arm-smmu-common-Factorize-some-code-in-smmu_ptw_6.patch [bz#1843852]
  - kvm-hw-arm-smmu-common-Add-IOTLB-helpers.patch [bz#1843852]
  - kvm-hw-arm-smmu-Introduce-smmu_get_iotlb_key.patch [bz#1843852]
  - kvm-hw-arm-smmu-Introduce-SMMUTLBEntry-for-PTW-and-IOTLB.patch [bz#1843852]
  - kvm-hw-arm-smmu-common-Manage-IOTLB-block-entries.patch [bz#1843852]
  - kvm-hw-arm-smmuv3-Introduce-smmuv3_s1_range_inval-helper.patch [bz#1843852]
  - kvm-hw-arm-smmuv3-Get-prepared-for-range-invalidation.patch [bz#1843852]
  - kvm-hw-arm-smmuv3-Fix-potential-integer-overflow-CID-143.patch [bz#1843852]
  - kvm-memory-Rename-memory_region_notify_one-to-memory_reg.patch [bz#1843852]
  - kvm-memory-Add-IOMMUTLBEvent.patch [bz#1843852]
  - kvm-memory-Add-IOMMU_NOTIFIER_DEVIOTLB_UNMAP-IOMMUTLBNot.patch [bz#1843852]
  - kvm-intel_iommu-Skip-page-walking-on-device-iotlb-invali.patch [bz#1843852]
  - kvm-memory-Skip-bad-range-assertion-if-notifier-is-DEVIO.patch [bz#1843852]
  - kvm-memory-clamp-cached-translation-in-case-it-points-to.patch [bz#1904393]
  - kvm-hw-ehci-check-return-value-of-usb_packet_map.patch [bz#1898628]
  - kvm-hw-net-e1000e-advance-desc_offset-in-case-of-null-de.patch [bz#1903070]
  - Resolves: bz#1909244
    (Remove KVM guest count and limit info message)
  - Resolves: bz#1843852
    (qemu core dumped: qemu-kvm: /builddir/build/BUILD/qemu-4.2.0/memory.c:1928: memory_region_notify_one: Assertion `entry->iova >= notifier->start && entry_end <= notifier->end' failed.)
  - Resolves: bz#1904393
    (CVE-2020-27821 virt:rhel/qemu-kvm: QEMU: heap buffer overflow in msix_table_mmio_write() in hw/pci/msix.c [rhel-8])
  - Resolves: bz#1898628
    (CVE-2020-25723 virt:rhel/qemu-kvm: QEMU: assertion failure through usb_packet_unmap() in hw/usb/hcd-ehci.c [rhel-8])
  - Resolves: bz#1903070
    (CVE-2020-25707 CVE-2020-28916 virt:rhel/qemu-kvm: various flaws [rhel-8])


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 4.2.0-42.el8
changelog:
  - kvm-linux-headers-add-vfio-DMA-available-capability.patch [bz#1905391]
  - kvm-s390x-pci-Move-header-files-to-include-hw-s390x.patch [bz#1905391]
  - kvm-vfio-Create-shared-routine-for-scanning-info-capabil.patch [bz#1905391]
  - kvm-vfio-Find-DMA-available-capability.patch [bz#1905391]
  - kvm-s390x-pci-Add-routine-to-get-the-vfio-dma-available-.patch [bz#1905391]
  - kvm-s390x-pci-Honor-DMA-limits-set-by-vfio.patch [bz#1905391]
  - kvm-s390x-fix-build-for-without-default-devices.patch [bz#1905391]
  - Resolves: bz#1905391
    (RHEL8.4 - s390x/pci: Honor vfio DMA limiting (qemu-kvm))


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 4.2.0-43.el8
changelog:
  - kvm-Drop-bogus-IPv6-messages.patch [bz#1918054]
  - Resolves: bz#1918054
    (CVE-2020-10756 virt:rhel/qemu-kvm: QEMU: slirp: networking out-of-bounds read information disclosure vulnerability [rhel-8.4.0])


author: Jon Maloy <jmaloy@redhat.com> - 4.2.0-44.el8
changelog:
  - kvm-spapr-Improve-handling-of-fdt-buffer-size.patch [bz#1901837]
  - kvm-spapr-Fold-h_cas_compose_response-into-h_client_arch.patch [bz#1901837]
  - kvm-spapr-Don-t-use-spapr_drc_needed-in-CAS-code.patch [bz#1901837]
  - kvm-spapr-Fix-handling-of-unplugged-devices-during-CAS-a.patch [bz#1901837]
  - kvm-spapr-Allow-memory-unplug-to-always-succeed.patch [bz#1901837]
  - kvm-spapr-Improve-handling-of-memory-unplug-with-old-gue.patch [bz#1901837]
  - kvm-block-Require-aligned-image-size-to-avoid-assertion-.patch [bz#1834281]
  - kvm-file-posix-Allow-byte-aligned-O_DIRECT-with-NFS.patch [bz#1834281]
  - kvm-block-iscsi-fix-heap-buffer-overflow-in-iscsi_aio_io.patch [bz#1912974]
  - Resolves: bz#1834281
    (qemu-img convert abort when converting image with unaligned size)
  - Resolves: bz#1901837
    (Failed to hotunplug pc-dimm device)
  - Resolves: bz#1912974
    (CVE-2020-11947 virt:rhel/qemu-kvm: QEMU: heap buffer overflow in iscsi_aio_ioctl_cb() in block/iscsi.c may lead to information disclosure [rhel-8])


author: Jon Maloy <jmaloy@redhat.com> - 4.2.0-45.el8
changelog:
  - kvm-virtiofsd-extract-lo_do_open-from-lo_open.patch [bz#1919111]
  - kvm-virtiofsd-optionally-return-inode-pointer-from-lo_do.patch [bz#1919111]
  - kvm-virtiofsd-prevent-opening-of-special-files-CVE-2020-.patch [bz#1919111]
  - Resolves: bz#1919111
    (CVE-2020-35517 virt:rhel/qemu-kvm: QEMU: virtiofsd: potential privileged host device access from guest [rhel-8.4.0])


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 4.2.0-46.el8
changelog:
  - kvm-redhat-makes-qemu-respect-system-s-crypto-profile.patch [bz#1902960]
  - kvm-spapr-Adjust-firmware-path-of-PCI-devices.patch [bz#1912891]
  - Resolves: bz#1902960
    (QEMU doesn't honour system crypto policies)
  - Resolves: bz#1912891
    ([ppc64le] --disk cdimage.iso,bus=usb fails to boot)


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 4.2.0-47.el8
changelog:
  - kvm-x86-cpu-Enable-AVX512_VP2INTERSECT-cpu-feature.patch [bz#1790620]
  - kvm-target-i386-add-fast-short-REP-MOV-support.patch [bz#1790620]
  - kvm-x86-cpu-Populate-SVM-CPUID-feature-bits.patch [bz#1790620]
  - kvm-i386-Add-the-support-for-AMD-EPYC-3rd-generation-pro.patch [bz#1790620]
  - Resolves: bz#1790620
    ([RFE] AMD Milan - Add KVM/support for EPYC-Milan CPU Model - Slow Train)


author: Danilo Cesar Lemes de Paula <ddepaula@redhat.com> - 4.2.0-48.el8
changelog:
  - kvm-ide-atapi-check-logical-block-address-and-read-size-.patch [bz#1917451]
  - Resolves: bz#1917451
    (CVE-2020-29443 virt:rhel/qemu-kvm: QEMU: ide: atapi: OOB access while processing read commands [rhel-8.4.0])


author: Zdenek Dohnal <zdohnal@redhat.com> - 7.1.1-5
changelog:
  - CVE-2018-9918 qpdf: stack exhaustion in QPDFObjectHandle and QPDF_Dictionary classes in libqpdf.a [fedora-all]


author: Jan Grulich <jgrulich@redhat.com> - 5.11-1-7
changelog:
  - Move libQt5EglFSDeviceIntegration lib out of the -devel subpkg
    Resolves: bz#1692970

  - Fix QImage allocaion failure
    Resolve: bz#1667860

  - Fix double free in QXmlStreamReader
    Resolve: bz#1667858

  - Fix segmentation fault on malformed BMP file
    Resolve: bz#1667859


author: Rex Dieter <rdieter@fedoraproject.org> - 5.10.1-3
changelog:
  - support %bootstrap, %check: add autotests
  - build with -O1 to workaround serious autotest/code failures (f28+, #1551246)


author: Pavel Cahyna <pcahyna@redhat.com> - 2.4-3
changelog:
  - Merge some spec changes from Fedora.
  - Apply upstream patch PR1887
    LPAR/PPC64 bootlist is incorrectly set when having multiple 'prep' partitions
  - Apply upstream patch PR1885
    Partition information recorded is unexpected when disk has 4K block size


author: Pavel Cahyna <pcahyna@redhat.com> - 2.4-4
changelog:
  - Backport fixes for upstream bugs 1974 and 1975
  - Backport fix for upstream bug 1913 (backup succeeds in case of tar error)
  - Backport fix for upstream bug 1926 (support for LACP bonding and teaming)
  - Apply upstream PR1954 (record permanent MAC address for bond members)


author: Pavel Cahyna <pcahyna@redhat.com> - 2.4-6
changelog:
  - Require xorriso instead of genisoimage, it is now the preferred method
    and supports files over 4GB in size.
  - Apply upstream PR2004 (support for custom network interface naming)
  - Backport upstream PR2001 (UEFI support broken on Fedora 29 and RHEL 8)


author: Pavel Cahyna <pcahyna@redhat.com> - 2.4-9
changelog:
  - Update fix for bz#1657725. Previous fix was not correct, bootlist was still
    invoked only with one partition argument due to incorrect array expansion.
    See upstream PR2096, 2097, 2098.


author: Pavel Cahyna <pcahyna@redhat.com> - 2.4-10
changelog:
  - Apply upstream patch PR1993
    Automatically exclude $BUILD_DIR from the backup
    Resolves: rhbz1677733


author: Pavel Cahyna <pcahyna@redhat.com> - 2.4-11
changelog:
  - Apply upstream PR2122: add additional NBU library path to fix support for
    NetBackup 8.
    Resolves: rhbz1747393
  - Apply upstream PR2021: Be safe against empty docker_root_dir (issue 1989)
    Resolves: rhbz1729493, where ReaR can not create a backup in rescue mode,
    because it thinks that the Docker daemon is running and hits the problem
    with empty docker_root_dir.
  - Apply upstream PR2223 and commit 36cf20e to avoid an empty string in the
    list of users to clone, which can lead to bash overflow with lots of users
    and groups per user and to wrong passwd/group files in the rescue system.
    Resolves: rhbz1729495
  - Backport of Upstream fix for issue 2035: /run is not mounted in the rescue
    chroot, which causes LVM to hang, especially if rebuilding initramfs.
    Resolves: rhbz1757488
  - Backport upstream PR 2218: avoid keeping build dir on errors
    by default when used noninteractively
    Resolves: rhbz1729501
  - Apply upstream PR2173 - Cannot restore using Bacula method
    due to "bconsole" not showing its prompt
    Resolves: rhbz1726992
  - Backport fix for upstream issue 2187 (disklayout.conf file contains
    duplicate lines, breaking recovery in migration mode or when
    thin pools are used). PR2194, 2196.
    Resolves: rhbz1732308


author: Pavel Cahyna <pcahyna@redhat.com> - 2.4-12
changelog:
  - Backport upstream PR #2293 to use grub-mkstandalone instead of
    grub-mkimage for UEFI (ISO image and GRUB_RESCUE image generation).
    Avoids hardcoded module lists or paths and so is more robust.
    Fixes an issue where the generated ISO image had no GRUB2 modules and
    was therefore unbootable. The backport does not add new config settings.
    Resolves: rhbz1737042


author: Neil Horman <nhorman@tuxdriver.com> - 0.1-2
changelog:
  - Updated requires for python3
  - Removed unneeded BuildRequires
  - Globed the inclusion of man page
  - Fixed license file tagging


author: Mark Huth <mhuth@redhat.com> - 0.9.7-6
changelog:
  - Resolves: rhbz#1314606 - show progress with addattachment
  - Resolves: rhbz#1314607 - problem with addattachment -s switch


author: Pranita Ghole<pghole@redhat.com> - 0.10.1-1
changelog:
  - Resolves: rhbz#1670001 - redhat-support-tool -o option does not work (soscleaner)
  - Resolves: rhbz#1670369 - redhat-support-lib-python: Traceback on make_report from utils.reporthelper
  - Resolves: rhbz#1670044 - redhat-support-tool proxy does not work on rhel-8


author: Pranita Ghole<pghole@redhat.com> - 0.11.2-1
changelog:
  - Resolves: rhbz#1677257 - redhat-support-lib-python: AttributeError from utils/reporthelper.py no buf


author: Vikas Rathee <vrathee@redhat.com> - 0.9.9-1
changelog:
  - Resolves: rhbz#1380109 - Include creation date and last modified date in Solution title details.
  - Resolves: rhbz#1342628 - When opening a new case, offer a default product.
  - Resolves: rhbz#1342632 - When opening a new case, offer to use the default case group of that user.


author: Vikas Rathee <vrathee@redhat.com> - 0.9.10-1
changelog:
  - Resolves: rhbz#1342627 - List cases by group.
  - Resolves: rhbz#1379619 - Inform when http_proxy environment variable is used.


author: Pranita Ghole<pghole@redhat.com> - 0.11.2-2
changelog:
  - Resolves: rhbz#1685296 - redhat-support-tool env var http_proxy does not work with user and password
  - Resolves: rhbz#1685295 - [RFE][RHEL8] Include Reason in cases of failed proxy
  - Resolves: rhbz#1684321 - redhat-support-tool config debug <level>` fails with "ERROR: debug is not a valid configuration file option.


author: Remi Collet <rcollet@redhat.com> - 4.0.10-2
changelog:
  - drop build dependency on pandoc
  - drop dependency on jemalloc #1591762
  - fix License (BSD and MIT)
  - add bundled libraries licences
  - cleanup conditions from spec file


author: Remi Collet <rcollet@redhat.com> - 5.0.3-2
changelog:
  - fix Heap buffer overflow in HyperLogLog triggered by malicious client
    CVE-2019-10192
  - fix Stack buffer overflow in HyperLogLog triggered by malicious client
    CVE-2019-10193


author: Remi Collet <rcollet@redhat.com> - 5.0.3-4
changelog:
  - fix lua scripts can overflow the heap-based Lua stack
    CVE-2021-32626
  - fix integer overflow issue with Streams
    CVE-2021-32627
  - fix integer overflow bug in the ziplist data structure
    CVE-2021-32628
  - fix integer overflow issue with intsets
    CVE-2021-32687
  - fix integer overflow issue with strings
    CVE-2021-41099


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 1.0-10.5
changelog:
  - Install license file with javadoc package
  - Convert versioned javadoc to versionless
  - Update to current packaging guidelines
  - Remove msv provides and obsoletes


author: Mat Booth <mat.booth@redhat.com> - 2011.1-1
changelog:
  - Update to version released from new project location rhbz#981275
  - Build/install with maven instead of ant
  - Drop old javadoc rpm bug workaround


author: Kalev Lember <kalevlember@gmail.com> - 0.7.93-1
changelog:
  - Update to 0.7.93
  - Tighten deps with the _isa macro
  - Don't manually require pkgconfig; rpmbuild generates this automatically
  - Use license macro for the COPYING file


author: Pavel Cahyna <pcahyna@redhat.com> - 0.6-4
changelog:
  - Fix complaints about /usr/bin/python during RPM build by making the affected scripts non-exec
  - Fix merge botch


author: Pavel Cahyna <pcahyna@redhat.com> - 1.0-3
changelog:
  - Rebase the network role to the last revision (d866422).
    Many improvements to tests, introduces autodetection of the current provider
    and defaults to using profile name as interface name.
  - Rebase the selinux, timesync and kdump roles to their 1.0rc1 versions.
    Many changes to the role interfaces to make them more consistent
    and conforming to Ansible best practices.
  - Update the description.


author: Pavel Cahyna <pcahyna@redhat.com> - 1.0-4
changelog:
  - Format the READMEs as html, by vdolezal, with changes to use highlight
    (source-highlight does not understand YAML)


author: Pavel Cahyna <pcahyna@redhat.com> - 1.0-5
changelog:
  - spec file improvement: Unify the source macros with deftag() and defcommit()
  - Update to upstream released versions and drop unnecessary patches.
  - Unify the spec file with Fedora (no functional changes intended).
  - Misc spec file comments fixes (by Mike DePaulo)
  - Fix rpmlint error by escaping a previous changelog entry with a macro (by Mike DePaulo)
  - Comply with Fedora guidelines by always using "cp -p" in %install (by Mike DePaulo)
  - Rebase network role - doc improvements, Fedora 29 and Ansible 2.7 support
  - Regenerate network role patch to apply without offset
  - Rebase kdump role to fix a forgotten edit, rhbz#1645633
  - Update timesync examples: add var prefix (rhbz#1642152), correct role prefix
  - Add Obsoletes for the -techpreview subpackage
  - Add warnings to role READMEs and other doc updates, rhbz#1616018
  - network: split the state setting into state and persistent_state, rhbz#1616014
  - depend on python-jmespath as Ansible will not ship it, rhbz#1660559


author: Pavel Cahyna <pcahyna@redhat.com> - 1.0-6
changelog:
  - Rebase the selinux role, fixes typo in tests, uncovered by Ansible 2.7,
    (rhbz#1677743) and lists all input variables in defaults
    to make Satellite aware of them (rhbz#1674004, PR#43)
  - Rebase the kdump role to fix check mode problems: rhbz#1685904
  - Rebase the timesync role: fixes check mode problems (rhbz#1685904)
    and lists all input variables in defaults (rhbz#1674004)
  - Rebase the network role: keeps the interface up for state: up
    if persistent_state is absent and solves problems with defining
    VLAN and MACVLAN interface types (issue #19) (rhbz#1685902)


author: Pavel Cahyna <pcahyna@redhat.com> - 1.0-7
changelog:
  - Update tests for the network role
  - Fix typo in a test for the timesync role
  - Tag tests suitable for Tier1 testing
  - Rebase the network role to add support for device features (PR#115,
    rhbz#1696703) and atomic changes (PR#119, rhbz#1695161)
  - network: apply upstream PR#121: allow modifying interface attributes
    without disrupting services (rhbz#1695157)


author: Pavel Cahyna <pcahyna@redhat.com> - 1.0-10
changelog:
  - Add the storage_safe_mode option, true by default, to prevent accidental
    data removal: rhbz#1763242, issue #42, PR #43 and #51.


author: Bastien Nocera <bnocera@redhat.com> - 3.4.2-5
changelog:
  + rhythmbox-3.4.2-5
  - Remove LIRC plugin
  - Fix 2 build warnings
  - Remove BRs for removed visualiser plugin


author: Bastien Nocera <bnocera@redhat.com> - 3.4.2-7
changelog:
  + rhythmbox-3.4.2-7
  - Fix warnings in art search when playing a radio
  - Fix initial import never finishing
  - Fix multimedia keys integration in GNOME


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - adjust for rpmdb index name change
  - drop unnecessary vendor-macro patch for real
  - add ISA-dependencies among rpm subpackages
  - make lzma and sqlite deps conditional and disabled by default for now


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - rpm 4.5.90-0.git8424.1 (alpha snapshot)
  - adjust to build against Berkeley DB 4.5.20 from compat-db for now
  - add posttrans to clean up db environment mismatch after upgrade
  - forward-port devel autodeps patch


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - 4.5.90-0.git8426.5
  - flip back to external bdb
  - fix tab vs spaces complaints from rpmlint
  - add dep for lzma and require unzip instead of zip in build (#310694)
  - add pkgconfig dependency to rpm-devel
  - drop ISA-dependencies for initial introduction
  - new snapshot from upstream for documentation fixes


author: Florian Festi <ffesti@redhat.com>
changelog:
  - 4.5.90-0.git8426.10
  - rpm-4.5.90-posttrans.patch
  - use header from rpmdb in posttrans to make anaconda happy


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - 4.5.90-0.git8461.1
  - new snapshot from upstream
  - fixes #68290, #455972, #446202, #453364, #456708, #456103, #456321, #456913,
    - partial fix for #457360


author: Jindrich Novy <jnovy@redhat.com>
changelog:
  - add support for noarch subpackages
  - fix segfault in case of insufficient disk space detected (#460146)


author: Jindrich Novy <jnovy@redhat.com>
changelog:
  - fix parsing of boolean expressions in spec (#456103)
    (unbreaks pam, jpilot and maybe other builds)


author: Jindrich Novy <jnovy@redhat.com>
changelog:
  - create directory structure for rpmbuild prior to build if it doesn't exist (#455387)
  - create _topdir if it doesn't exist when installing SRPM
  - don't generate broken cpio in case of hardlink pointing on softlink,
    thanks to pixel@mandriva.com


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - add hack to support extracting gstreamer plugin provides (#438225)
  - fix another macro argument handling regression (#461180)


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - update to official 4.5.90 alpha tarball 
  - a big pile of misc bugfixes + translation updates
  - isa-macro generation fix for ppc (#464754)
  - avoid pulling in pile of perl dependencies for an unused script
  - handle both "invalid argument" and clear env version mismatch on posttrans


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - update to 4.6.0-rc1 
  - fixes #465586, #466597, #465409, #216221, #466503, #466009, #463447...
  - avoid using %configure macro for now, it has unwanted side-effects on rpm


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - Make noarch sub-packages actually work
  - Fix defaultdocdir logic in installplatform to avoid hardwiring mandir


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - update to 4.6.0-rc2
  - fixes #471820, #473167, #469355, #468319, #472507, #247374, #426672, #444661
  - enable automatic generation of pkg-config and libtool dependencies #465377


author: Panu Matilainen <pmatilai@redhat.com> - 4.6.0-0.rc4.2
changelog:
  - change platform sharedstatedir to something more sensible (#185862)
  - add rpmdb_foo links to db utils for documentation compatibility


author: Panu Matilainen <pmatilai@redhat.com> - 4.6.0-0.rc4.3
changelog:
  - extract mimehandler provides from .desktop files
  - preliminaries for extracting font provides (not enabled yet)
  - dont classify font metrics data as fonts
  - only run script dep extraction once per file, duh


author: Panu Matilainen <pmatilai@redhat.com> - 4.6.0-1
changelog:
  - update to 4.6.0 final
  - revert libmagic looking into compressed files for now, breaks ooffice build


author: Jindrich Novy <jnovy@redhat.com> - 4.6.0-4
changelog:
  - inherit group tag from the main package (#470714)
  - ignore BuildArch tags for anyarch actions (#442105)
  - don't check package BuildRequires when doing --rmsource (#452477)
  - don't fail because of missing sources when only spec removal
    is requested (#472427)


author: Jindrich Novy <jnovy@redhat.com> - 4.6.0-5
changelog:
  - remove two offending hunks from anyarch patch causing that
    RPMTAG_BUILDARCHS isn't written to SRPMs


author: Panu Matilainen <pmatilai@redhat.com> - 4.6.0-7
changelog:
  - loosen up restrictions on dependency names (#455119)
  - handle inter-dependent pkg-config files for requires too (#473814)
  - error/warn on elf binaries in noarch package in build


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-0.beta1.9
changelog:
  - fix recorded file state of otherwise skipped files (#492947)
  - compress ChangeLog, drop old CHANGES file (#492440)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-1
changelog:
  - update to 4.7.0 final (http://rpm.org/wiki/Releases/4.7.0)
  - fixes #494049, #495429
  - dont permit test-suite failure anymore


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-2
changelog:
  - file classification tweaks for text files (#494817)
    - disable libmagic text token checks, it's way too error-prone
    - consistently classify all text as such and include description


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-3
changelog:
  - couple of merge-review fixes (#226377)
    - eliminate bogus leftover rpm:rpm rpmdb ownership
    - unescaped macro in changelog
  - fix find-lang --with-kde with KDE3 (#466009)
  - switch back to default file digest algorithm


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-4
changelog:
  - split cron-job into a sub-package to avoid silly deps on core rpm (#500722)
  - rpm requires coreutils but not in %post
  - build with libcap and libacl
  - fix pgp pubkey signature tag parsing


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-5
changelog:
  - don't mess up problem altNEVR in python ts.check() (#501068)
  - fix hardlink size calculation on build (#503020)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-8
changelog:
  - updated OSGi dependency extractor (#506471)
  - fix segfault in symlink fingerprinting (#505777)
  - fix invalid memory access causing bogus file dependency errors (#506323)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.1-5
changelog:
  - fix duplicate dependency filtering on build (#490378)
  - permit absolute paths in file lists again (#521760)
  - use permissions 444 for all .debug files (#522194)
  - add support for optional bugurl tag (#512774)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.1-6
changelog:
  - use relative paths within db environment (related to #507309, #507309...)
  - remove db environment on close in chrooted operation (related to above)
  - initialize rpmlib earlier in rpm2cpio (#523260)
  - fix file dependency tag extension formatting (#523282)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.1-7
changelog:
  - fix build with BDB 4.8.x by removing XA "support" from BDB backend 
  - perl dep extractor heredoc parsing improvements (#524929)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.1-8
changelog:
  - support multiple python implementations in brp-python-bytecompile (#531117)
  - make disk space problem reporting a bit saner (#517418)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.2-2
changelog:
  - missing error exit code from signing password checking (#496754)
  - dont fail build on unrecognized data files (#532489)
  - dont try to parse subkeys and secret keys (#436812)
  - fix chmod test on selinux, breaking %{_fixperms} macro (#543035)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-0.beta1.1
changelog:
  - update to 4.8.0-beta1 (http://rpm.org/wiki/Releases/4.8.0)
  - rpm-build conflicts with current ocaml-runtime


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-0.beta1.2
changelog:
  - fix noise from python bytecompile on non-python packages (#539635)
  - make all our -devel [build]requires isa-specific
  - trim out superfluous -devel dependencies from rpm-devel


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-3
changelog:
  - fix segfault on failed url retrieval
  - fix verification error code depending on verbosity level
  - if anything in testsuite fails, dump out the log


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-8
changelog:
  - more fixes to postscript provides extractor (#562228)
  - avoid accessing unrelated mount points in disk space checking (#547548)
  - fix disk space checking with erasures present in transaction (#561160)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-11
changelog:
  - support single PPD providing driver for devices (#568351)
  - merge the psdriver patch pile into one
  - preserve empty lines in spec prep section (#573339)
  - teach python bindings about RPMTRANS_FLAG_NOCONTEXTS (related to #573111)
  - dont own localized man directories through find_lang (#569536)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-15
changelog:
  - handle non-existent dependency sets correctly in python (#593553)
  - make find-lang look in all locale dirs (#584866)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-16
changelog:
  - adjust to new pkg-config behavior wrt private dependencies (#596433)
  - rpm-build now requires pkgconfig >= 0.24


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.1-1
changelog:
  - update to 4.8.1 (http://rpm.org/wiki/Releases/4.8.1)
  - drop no longer needed patches
  - fix source url pointing to testing directory


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.1-2
changelog:
  - fix a potential getOutputFrom() error from font provide extraction
  - debug-friendlier message to aid finding other similar cases (#565223)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.1-5
changelog:
  - create gdb index on debuginfo generation (#617166)
  - rpm-build now requires /usr/bin/gdb-add-index for consistent index creation
  - include COPYING in -apidocs for licensing guidelines compliance


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.1-7
changelog:
  - bunch of spec tweaks, cleanups + corrections:
    - shorten rpm-build filelist a bit with glob use, reorder for saner grouping
    - missing isa in popt version dependency
    - only add rpmdb_foo symlinks for actually relevant db_* utils
    - drop no longer necessary file-devel dependency from rpm-devel
    - drop sqlite backend build-conditional
    - preliminaries for moving from db4 to libdb
  - use gnupg2 for signing as that's more likely to be installed by default


author: Panu Matilainen <pmatilai@redhat.com> - 4.9.0-0.beta1.1
changelog:
  - rpm 4.9.0-beta1 (http://rpm.org/wiki/Releases/4.9.0)
    - drop no longer needed patches
    - adjust requires + buildrequires to match current needs
    - adjust rpmdb index ghosts to match the new release
    - split librpmbuild and librpmsign to a separate rpm-build-libs package
    - split rpmsign to its own package to allow signing without all the build goo
    - build-conditionalize plugins, disabled for now
    - gstreamer and printer dependency generation moving out
    - handle .so symlink dependencies with fileattrs
    - use gnupg2 for signing as that's what typically installed by default


author: Panu Matilainen <pmatilai@redhat.com> - 4.9.0-0.beta1.3
changelog:
  - avoid division by zero in rpmdb size calculation (#671056)
  - fix secondary index iteration returing duplicate at end (#671149)
  - fix rebuilddb creating duplicate indexes for first header


author: Panu Matilainen <pmatilai@redhat.com> - 4.9.0-0.beta1.5
changelog:
  - dont try to remove environment files if private env used (related to #671200)
  - unbreak mono dependency extraction (#673663)
  - complain instead of silent abort if cwd is not readable (#672576)


author: Panu Matilainen <pmatilai@redhat.com> - 4.9.0-0.rc1.1
changelog:
  - update to 4.9.0-rc1
  - drop upstream patches
  - nss packaging has changed, buildrequire nss-softokn-freebl-devel


author: Panu Matilainen <pmatilai@redhat.com> - 4.9.0-0.rc1.4
changelog:
  - spec cosmetics clean up extra whitespace + group more logically
  - wipe out BDB environment at boot via tmpfiles.d


author: Panu Matilainen <pmatilai@redhat.com> - 4.9.0-5
changelog:
  - verify some properties of replaced and wrong-colored files (#528383)
  - only list packages that would be generated on spec query (#693338)
  - preferred color packages should be erased last (#680261)
  - fix leaks when freeing a populated transaction set
  - take file state into account for file dependencies


author: Panu Matilainen <pmatilai@redhat.com> - 4.9.0-8
changelog:
  - add dwarf-4 support to debugedit (#707677)
  - generate build-id symlinks for all filenames sharing a build-id (#641377)


author: Panu Matilainen <pmatilai@redhat.com> - 4.9.0-9
changelog:
  - fix crash if prep or changelog section in spec is empty (#706959)
  - fix crash on macro which undefines itself
  - fix script dependency generation with file 5.07 string changes (#712251)


author: Panu Matilainen <pmatilai@redhat.com> - 4.9.1.2-3
changelog:
  - adjust db util prefix & dependency due to #749293
  - warn but dont fail the build if STABS encountered by debugedit (#725378)


author: Kay Sievers <kay@redhat.com> - 4.9.1.2-8
changelog:
  - add temporary rpmlib patch to support filesystem transition
    https://fedoraproject.org/wiki/Features/UsrMove


author: Panu Matilainen <pmatilai@redhat.com> - 4.9.1.2-13
changelog:
  - fix memory corruption on rpmdb size estimation (#766260)
  - fix couple of memleaks in python bindings (#782147)
  - fix regression in verify output formatting (#797964)
  - dont process spec include in false branch of if (#782970)
  - only warn on missing excluded files on build (#745629)
  - dont free up file info sets on test transactions


author: Panu Matilainen <pmatilai@redhat.com> - 4.9.90-0.git11505.5
changelog:
  - add temporary fake library provides to get around deltarpm "bootstrap"
    dependency (yes its dirty)


author: Panu Matilainen <pmatilai@redhat.com> - 4.9.90-0.git11519.1
changelog:
  - newer git snapshot to keep patch-count down
  - fixes CVE-2012-0060, CVE-2012-0061 and CVE-2012-0815
  - fix obsoletes in installing set getting matched on provides (#810077)


author: Panu Matilainen <pmatilai@redhat.com> - 4.9.90-0.git11536.1
changelog:
  - newer git snapshot (#809402, #808750)
  - adjust posttrans script wrt bdb string change (#803866, #805613)


author: Panu Matilainen <pmatilai@redhat.com> - 4.10.90-0.git11989.1
changelog:
  - update to 4.11 (http://rpm.org/wiki/Releases/4.11.0) post-alpha snapshot
  - drop/adjust patches as necessary


author: Panu Matilainen <pmatilai@redhat.com> - 4.10.90-0.git11989.3
changelog:
  - package /usr/lib/rpm/macros.d directory (related to #846679)
  - fixup a bunch of old incorrect dates in spec changelog


author: Panu Matilainen <pmatilai@redhat.com> - 4.11.0-0.beta1.2
changelog:
  - armv7hl and armv7hnl should not have -mthumb (#901901)
  - fix duplicate directory ownership between rpm and rpm-build (#894201)
  - fix regression on paths shared between a real file/dir and a ghost


author: Panu Matilainen <pmatilai@redhat.com> - 4.11.1-7
changelog:
  - fix build-time double-free on file capability processing (#956190)
  - fix relocation related regression on file sanity check (#1001553)
  - fix segfault on empty -p <lua> scriptlet body (#1004062)
  - fix source url, once again


author: Panu Matilainen <pmatilai@redhat.com> - 4.11.1-11
changelog:
  - generate kmod(module.ko) provides for kernel (#1025513)
  - dont override CONFIG_SITE if already set (related to #962837)


author: Panu Matilainen <pmatilai@redhat.com> - 4.11.2-0.rc1.1
changelog:
  - update to 4.11.2-rc1 (http://rpm.org/wiki/Releases/4.11.2)
  - drop upstreamed patches, adjust others as needed
  - handle python egg-info's version munging in file lists


author: Panu Matilainen <pmatilai@redhat.com> - 4.11.2-3
changelog:
  - dont eat newlines on parametrized macro invocations (#1045723)
  - fully reset file actions between rpmtsRun() calls (#1076552)
  - fix build and sign module initialization in python3 (#1064758)


author: Panu Matilainen <pmatilai@redhat.com> - 4.11.2-6
changelog:
  - build with -fsanitize=address and -fsanitize=undefined for now
  - add spec build conditional for sanitizer build


author: Tom Callaway <spot@fedoraproject.org> - 4.11.2-10
changelog:
  - remove _isa from all BuildRequires (bz 554854)
    See: https://fedoraproject.org/wiki/Packaging:Guidelines#BuildRequires_and_.25.7B_isa.7D


author: Panu Matilainen <pmatilai@redhat.com> - 4.11.90-0.git12844.1
changelog:
  - Update to rpm 4.12-alpha ((http://rpm.org/wiki/Releases/4.12.0)
  - Drop/adjust patches as appropriate
  - New sub-package(s) for plugins


author: Panu Matilainen <pmatilai@redhat.com> - 4.12.0-0.beta1.1
changelog:
  - Update to 4.12.0-beta1 (http://rpm.org/wiki/Releases/4.12.0)
  - Fixes #1122004, #1111349, #1117912, #1123722
  - Drop upstreamed patches


author: Panu Matilainen <pmatilai@redhat.com> - 4.12.0.1-1
changelog:
  - Update to rpm-4.12.0.1 final (http://rpm.org/wiki/Releases/4.12.0.1)
  - Temporary workaround payload size mismatch issue in rpm2cpio (#1142949)


author: Panu Matilainen <pmatilai@redhat.com> - 4.12.0.1-3
changelog:
  - Skip ghost files in payload (#1156497)
  - Fix size and archice size tag generation on big-endian systems


author: Lubos Kardos <lkardos@redhat.com> - 4.12.0.1-5
changelog:
  - Add check against malicious CPIO file name size (#1168715)
  - Fixes CVE-2014-8118
  - Fix race condidition where unchecked data is exposed in the file system
    (#1039811)
  - Fixes CVE-2013-6435


author: Lubos Kardos <lkardos@redhat.com> 4.12.0-11
changelog:
  - Pass _find_debuginfo_opts -g to eu-strip for executables (#1186563)
  - add_minidebug is not ran when strip_g is set (#1186563)


author: Lubos Kardos <lkardos@redhat.com> - 4.12.90-5
changelog:
  - If globbing of a filename fails, try use the filename without globbing.
    (#1246743)
  - Modify rpmIsGlob() to be more precise and compatible with glob().
    (#1246743)


author: Lubos Kardos <lkardos@redhat.com> - 4.13-0.rc1.6
changelog:
  - If %_wrong_version_format_terminate_build is 1 then terminate build in case
    that version format is wrong i. e. epoch is not unsigned integer or version
    contains more separators (":", "-"). %_wrong_version_format_terminate_build
    is 1 by deafault (#1265700)


author: Lubos Kardos <lkardos@redhat.com> - 4.13-0.rc1.7
changelog:
  - Fix reading a memory right after the end of an allocated area (#1260248)
  - Add support for various types of dependencies to rpmdeps tool (#1247092)
  - fix %autopatch when patch do not exist (#1244172)


author: Lubos Kardos <lkardos@rpm.org> - 4.13.0-0.rc1.13
changelog:
  - Add possibility to disable file triggers
  - Fix unwanted multiple execution of filetriggers in dnf (#1282115)


author: Lubos Kardos <lkardos@redhat.com> - 4.13.0-0.rc1.20
changelog:
  - Revert using %configure, it causes problems
  - Temporary set %_gnu macro explictly, just for one build (#1303265)


author: Florian Festi <ffesti@rpm.org> - 4.13.0-0.rc1.24
changelog:
  - Also block idle and sleep in the systemd-inhibit plugin (#1297984)
  - Add support for MIPS release 6
  - Add mips32 mips64 mipsel and mipseb macros (#1285116)


author: Lubos Kardos <lkardos@redhat.com> 4.13.0-0.rc1.31
changelog:
  - Enable --no-backup-if-mismatch by default in %patch macro (#884755)
  - Add %{_default_patch_flags} to %__patch which is used in %autosetup
  - Use fuzz settings for %autopatch/%autosetup


author: Lubos Kardos <lkardos@redhat.com> 4.13.0-0.rc1.33
changelog:
  - Fix sigsegv in stringFormat() (#1316903)
  - Fix reading rpmtd behind its size in formatValue() (#1316896)


author: Igor Gnatenko <ignatenko@redhat.com> - 4.13.0-0.rc1.41
changelog:
  - Add %{?system_python_abi}
  - rpm-python -> python2-rpm && rpm-python3 -> python3-rpm with providing old names
  - Fixes and cleanups


author: Thierry Vignaud <tvignaud@redhat.com> - 4.13.0-2
changelog:
  - Fix package name references in python sub-packages to match reality
  - Re-enable test-suite now that it works again


author: Panu Matilainen <pmatilai@redhat.com> - 4.13.0-11
changelog:
  - Fix malformed packages being generated around 4GB boundary (#1405570)
  - Resurrect debuginfo GDB index generation (#1410907)


author: Mark Wielaard <mjw@redhat.com> - 4.13.0.1-13
changelog:
  - Add tests fix for sed file build-id regexp matching.
  - Add fix for build-ids in non-executable ELF files (#1433837).


author: Panu Matilainen <pmatilai@redhat.com> - 4.13.0.1-17
changelog:
  - Work around missing python[23] during build dependency parse
  - Include ISA in the new python library version dependencies too


author: Mark Wielaard <mjw@fedoraproject.org> - 4.13.0.1-19
changelog:
  - Minisymtab should only be added for executables or shared libraries.
  - Add find-debuginfo.sh -n (debugedit --no-recompute-build-id) option.


author: Mark Wielaard <mjw@fedoraproject.org> - 4.13.0.1-25
changelog:
  - Add support for debugsource and debuginfo subpackages
    - find-debuginfo-untangle-unique-build-options.patch
    - debugsrc-and-sub-debuginfo-packages.patch


author: Mark Wielaard <mjw@fedoraproject.org> - 4.13.0.1-28
changelog:
  - Add debugedit-prefix.patch.
  - Add find-debuginfo-filter-built-ins.patch.
  - Add find-debuginfo-dwz-multi.patch.
  - Add find-debuginfo-and-macro-docs.patch.


author: Mark Wielaard <mjw@fedoraproject.org> - 4.13.0.1-29
changelog:
  - Track patches using https://pagure.io/rpm-fedora
  - Use file list to explicitly set mode for build-id dirs/files
    (#1452893, #1458839)


author: Miro Hrončok <mhroncok@redhat.com> - 4.13.90-0.git14000.4
changelog:
  - Add platform-python bytecompilation patch: platform-python-bytecompile.patch
  - Add platform python deps generator patch: platform-python-abi.patch
  - Add a platform-python subpackage and remove system python related declarations
  - Build rpm without platform_python for bytecompilation
    (https://fedoraproject.org/wiki/Changes/Platform_Python_Stack)


author: Panu Matilainen <pmatilai@redhat.com> - 4.14.0-0.rc1.1
changelog:
  - Rebase to rpm 4.14.0-rc1 (http://rpm.org/wiki/Releases/4.14.0)
  - Re-enable SHA256 header digest generation (see #1480407)


author: Panu Matilainen <pmatilai@redhat.com> - 4.14.0-0.rc1.2
changelog:
  - Actually honor with/without libimaevm option
  - ima-evm-utils-devel >= 1.0 is required for rpm >= 4.14.0


author: Tomas Orsava <torsava@redhat.com> - 4.14.1-5
changelog:
  - Add envvar that will be present during RPM build,
    Part of a Fedora Change for F28: "Avoid /usr/bin/python in RPM build"
    https://fedoraproject.org/wiki/Changes/Avoid_usr_bin_python_in_RPM_Build


author: Panu Matilainen <pmatilai@redhat.com> - 4.14.1-6
changelog:
  - Avoid unnecessary macro helper dependency on /usr/bin/python (#1538657)
  - Fix release of previous changelog entry


author: Panu Matilainen <pmatilai@redhat.com> - 4.14.2-0.rc2.1
changelog:
  - Update to rpm 4.14.2-rc2
  - Fixes a regression in rpmlog error handling (#1597274)
  - Fixes several resource leaks found by covscan (#1602681)
  - Fixes DISTTAG not getting copied to source rpms (#1596193)


author: Panu Matilainen <pmatilai@redhat.com> - 4.14.2-1
changelog:
  - Buildrequire audit-libs-devel to actually enable the feature (#1607612)
  - Update to rpm 4.14.2 final (http://rpm.org/wiki/Releases/4.14.2)


author: Panu Matilainen <pmatilai@redhat.com> - 4.14.2-7
changelog:
  - Move python-macro-helper to main package where the macros are (#1651926)
  - Document --noverify in the man page (#1646458)
  - Handle unsupported digests the same as disabled ones (#1652529)


author: Panu Matilainen <pmatilai@redhat.com> - 4.14.2-11
changelog:
  - Revised patch for Py3 string data as surrogate-escaped utf-8 (#1631292)
  - Add a .decode() method to returned Py3 strings for compatibility


author: Panu Matilainen <pmatilai@redhat.com> - 4.14.2-14
changelog:
  - Verify packages before signing (#1646388)
  - Make rpmsign exist values more consistent with our other tools


author: Florian Festi <ffesti@redhat.com> - 4.14.2-16
changelog:
  - Sort list of hard linked files in find-debuginfo.sh (#1421272)
  - Correct rpm -ql exit value when optional -p is omitted (#1680610)
  - Show list of files only once when use rpm -ql and multiple rpm files (#1689898)


author: Florian Festi <ffesti@redhat.com> - 4.14.2-23
changelog:
  - Use --dpbath only with full path (#1696408)
  - Fix memory leaks (#1714657)
  - Remove capabilities instead of setting empty caps via. --setcaps (#1700920)
  - Fix bash warning from solution for #1689810


author: Panu Matilainen <pmatilai@redhat.com> - 4.14.2-27
changelog:
  - Support generating build-id's from compressed ELF files (#1650074)
  - Compress annobit notes in find-debuginfo (#1719837)


author: Florian Festi <ffesti@redhat.com> - 4.14.2-31
changelog:
  - Parallelize /usr/lib/rpm/brp-strip-static-archive (#1691824)
  - Parallelize /usr/lib/rpm/check-buildroot (#1704354)


author: Jarod Wilson <jarod@redhat.com> - 5-4
changelog:
  - Make hooks more resilient to missing info
  - Error out with a useful message when necessary info isn't there
  - Resolves: rhbz#1627122


author: Thomas Woerner <twoerner@redhat.com> - 8.10-7
changelog:
  - removed fakeroot requirement and all qa_robot scripts (RHBZ#1615605)
  - Fixed missing build requires for python3-devel


author: Todd Zullinger <tmz@pobox.com> - 1.10-9
changelog:
  - Update UsrLibBinaryException config to include .build-id
  - Ignore useless-provides on debuginfo provides (bz1489096)


author: Thomas Woerner <twoerner@redhat.com> - 1.10.13.1
changelog:
  - Fix unit test: use platform-python, py.test-3, no flake8 (RHBZ#1576803)
  - Update of ValidShells (RHBZ#1633698)
  - Remove Python2 paths from TagsCheck.py (RHBZ#1633698)
  - Enable bash-competion scripts (RHBZ#1577890)


author: Jiri Vymazal <jvymazal@redhat.com> - 8.37.0-10
changelog:
  RHEL 8.1.0 ERRATUM
  - added option for imfile endmsg.regex
    resolves: rhbz#1627941
  - added patch enhancing imfile rotation detection
    resolves: rhbz#1674471
  - added patch fixing msgOffset datatype preventing crash on
    message with too long other fields
    resolves: rhbz#1677037
  - added patch introducing "preservecase" option for imudp/imtcp
    resolves: rhbz#1614181


author: Jiri Vymazal <jvymazal@redhat.com> - 8.37.0-11
changelog:
  RHEL 8.1.0 ERRATUM
  - fixed memory leak in imjournal by proper cursor releasing
    resolves: rhbz#1716867


author: Jiri Vymazal <jvymazal@redhat.com> - 8.37.0-12
changelog:
  RHEL 8.1.0 ERRATUM
  - edited imjournal memleak patch to not cause double-free crash
    resolves: rhbz#1729995
  - added patch calling journald API only when there are no
    preceeding errors
    resolves: rhbz#1722165
  - added patch fixing imrelp module when invoked with old syntax
    resolves: rhbz#1724218


author: Jiri Vymazal <jvymazal@redhat.com> - 8.37.0-13
changelog:
  RHEL 8.1.0 ERRATUM
  - added patch enabling stricter TLS certs checking conforming to 
    common criteria requirements
    resolves: rhbz#1733244


author: Jiri Vymazal <jvymazal@redhat.com> - 8.1911.0-1
changelog:
  RHEL 8.2.0 ERRATUM
  - rebased to 8.1911.0 upstream version, removed, previously
    upstreamed patches
    resolves: rhbz#1740683
    resolves: rhbz#1659383
    resolves: rhbz#1746876
    resolves: rhbz#1676559
    resolves: rhbz#1692072
    resolves: rhbz#1692073
    resolves: rhbz#1692074
    resolves: rhbz#1699242
    resolves: rhbz#1738213
    resolves: rhbz#1744691
    resolves: rhbz#1755218
    resolves: rhbz#1768321
    resolves: rhbz#1768324
  - added patch fixing imfile stefiles naming
    resolves: rhbz#1763757


author: Jiri Vymazal <jvymazal@redhat.com> - 8.1911.0-3
changelog:
  RHEL 8.2.0 ERRATUM
  - added patch reverting rejecting expired certs by default
    resolves: rhbz#1782353
  - added patch silencing false errors on config.enabled statement
    resolves: rhbz#1659383


author: Stephen Gallagher <sgallagh@redhat.com> - 0.11-15
changelog:
  - Temporarily disable -Werror=format-security to unbreak the build
  - Build with verbose command-line visible in the logs
  - Resolves: rhbz#1424270


author: Vít Ondruch <vondruch@redhat.com> - 2.5.1-97
changelog:
  - Fix TLS 1.3 issues.
    * ruby-2.6.0-fix-test-failure-with-TLS-1.3.patch
    * ruby-2.6.0-net-http-net-ftp-fix-session-resumption-with-TLS-1.3.patch
    Related: rhbz#1616213


author: Jun Aruga <jaruga@redhat.com> - 2.5.1-99
changelog:
  - Fix generated rdoc template issues.
    * ruby-2.6.0-rdoc-6.0.1-fix-template-typo.patch
    Resolves: rhbz#1612026


author: Vít Ondruch <vondruch@redhat.com> - 2.5.1-99
changelog:
  - Additional OpenSSL 1.1.1 fixes.
    * ruby-2.6.0-fix-test-failure-with-TLS-1.3-maint.patch
    * ruby-2.6.0-config-support-include-directive.patch
    * ruby-2.6.0-use-larger-keys-for-SSL-tests.patch
    Related: rhbz#1616213


author: Vít Ondruch <vondruch@redhat.com> - 2.5.1-100
changelog:
  - Properly harden package using -fstack-protector-strong.
    * ruby-2.6.0-configure-fstack-protector-strong.patch
    Resolves: rhbz#1624168


author: Vít Ondruch <vondruch@redhat.com> - 2.5.5-104
changelog:
  - Update to Ruby 2.5.5.
    * Remove Patch25: ruby-2.6.0-Update-for-tzdata-2018f.patch; subsumed
    * Remove Patch11: ruby-2.6.0-Try-to-update-cert.patch; subsumed
    * Remove Patch19: ruby-2.6.0-net-http-net-ftp-fix-session-resumption-with
        -TLS-1.3.patch; subsumed
    Resolves: rhbz#1688758
  - Don't ship .stp files when SystemTap support is disabled.
    Related: rhbz#1657915
  - Fix CovScan issues.
    Resolves: rhbz#1628592


author: Jun Aruga <jaruga@redhat.com> - 2.5.5-105
changelog:
  - Use ffi_closure_alloc to avoid segmentation fault by libffi on aarch64.
    Resolves: rhbz#1727832
  - Properly support %prerelease in %gemspec_ macros.
    Related: rhbz#1688758
  - Fix rdoc gzipped javascript pages are not the same across multilib.
    Resolves: rhbz#1719647


author: Jun Aruga <jaruga@redhat.com> - 2.6.3-105
changelog:
  - Update to Ruby 2.6.3 by merging Fedora master branch (commit: 1cc2a49)
    * Properly generate "ruby(rubygems)" versioned dependencies.
    * Extract composition of dependecy strings into helper.
    * Loosen RDoc dependency.
    * Upstream fix adding -C flag instead of changing directory for gem build.
    * Remove obsolete Group tag
    * Fix ".include =" support in openssl.cnf.
    * Link IRB back to StdLib.
    * Link IRB files instead of directories.
    * Exclude irb.rb from ruby-libs.
    Resolves: rhbz#1672575


author: Jun Aruga <jaruga@redhat.com> - 2.6.3-106
changelog:
  - Use ffi_closure_alloc to avoid segmentation fault by libffi on aarch64.
    Resolves: rhbz#1727832
  - Properly support %prerelease in %gemspec_ macros.
    Related: rhbz#1672575


author: Jun Aruga <jaruga@redhat.com> - 0.5.2-1
changelog:
  - New upstream release 0.5.2 by merging Fedora master branch (commit: cc15309)
    Resolves: rhbz#1672575


author: lihaipeng <lihaipeng@openanolis.org> - 1.0.0-2.0.1
changelog:
  - Changed the way how/when parameters are interpret
  - Reference https://github.com/ged/ruby-pg/commit/73cd5e158ba4af73243c22f8918b1754256db17b


author: Jun Aruga <jaruga@redhat.com> - 1.1.4-1
changelog:
  - Update to pg 1.1.4 by merging Fedora master branch (commit: 397796e)
    * BuildRequires: s/postgresql-devel/libpq-devel/
    * Add marking lines at the start and end of the setup.log
    Resolves: rhbz#1672575


author: Lokesh Mandvekar <lsm5@redhat.com> - 0.0.8-1.git4155b68
changelog:
  - Resolves: rhbz#1277245 - bump to 0.0.8
  - Resolves: rhbz#1302363 - criu is a runtime dep
  - Resolves: rhbz#1302348 - libseccomp-golang is bundled in Godeps
  - manpages included


author: Lokesh Mandvekar <lsm5@redhat.com> - 1.0.0-1.rc2
changelog:
  - Resolves: #1412239 - *CVE-2016-9962* - set init processes as non-dumpable,
  runc patch from Michael Crosby <crosbymichael@gmail.com>


author: Lokesh Mandvekar <lsm5@redhat.com> - 1.0.0-9.1.gitf8ce01d
changelog:
  - Resolves: #1447078 - change default root path
  - add commit e800860 from runc @projectatomic/change-root-path


author: Frantisek Kluknavsky <fkluknav@redhat.com> - 1.0.0-24.rc4.dev.gitc6e4a1e.1
changelog:
  - rebase to c6e4a1ebeb1a72b529c6f1b6ee2b1ae5b868b14f
  - https://github.com/opencontainers/runc/pull/1651


author: Dan Walsh <dwalsh@redhat.com> - 2:1.0.0-40.rc5.dev.gitad0f525
changelog:
  - Remove sysclt handling, not needed in RHEL8
  - Make sure package built with seccomp flags
  - Remove rectty
  - Add completions


author: Dan Walsh <dwalsh@redhat.name> - 2:1.0.0-46.dev.gitb4e2ecb
changelog:
  - Add patch https://github.com/opencontainers/runc/pull/1807 to allow
  - runc and podman to work with sd_notify


author: Lokesh Mandvekar <lsm5@redhat.com> - 1.0.0-55.rc5.dev.git2abd837
changelog:
  - Resolves: #1665770 - rootfs: umount all procfs and sysfs with --no-pivot
  - Resolves: CVE-2019-5736


author: Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-15
changelog:
  - 1554032 - saned doesn't have permissions to write on usb port
  - updated README.Fedora - mention epson official drivers


author: Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-19.1
changelog:
  - 1852468, 1852467, 1852466, 1852465 - prevent buffer overflow in esci2_img
  - 1852668, 1852667, 1852666, 1852665 - disable autodiscovery for epsonds backend


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - workarounds for weird bug (all so-files had names with "s="
    - except for sparc which has just "=" and IA64 which works)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - don't include xscanimage desktop entry - it's a gimp
    plugin. Doh. (part of #17076)
  - add tetex-latex as a build requirement


author: Tim Waugh <twaugh@redhat.com> 1.0.5-0.20010530
changelog:
  - sane-backends (sane-frontends is in a separate package now).
  - 2001-05-30 CVS snapshot.
  - include.patch no longer needed.
  - sg3timeout.patch no longer needed.


author: Tim Waugh <twaugh@redhat.com> 1.0.7-6
changelog:
  - Re-apply the original 1.0.7-4 fix (oops):
    - Make sure to load SCSI modules if not already loaded (bug #59979).


author: Tim Waugh <twaugh@redhat.com> 1.0.8-0.20020522.1
changelog:
  - Update to CVS.  Release expected before the end of the month.
  - No longer need defaultincl or argv patches.


author: Tim Waugh <twaugh@redhat.com> 1.0.11-1
changelog:
  - Shipped libtool is broken; use installed script instead.
  - Remove files not shipped.
  - Fix some /usr/lib references.
  - 1.0.11.
  - Drop sane-sparc, errorchk, hp101, security patches.
  - Update rpath, docdir patches.
  - Use %find_lang.


author: Tim Waugh <twaugh@redhat.com> 1.0.13-6
changelog:
  - Ship libusb.usermap (from sane-backends-1.0.14) and a pam_console-aware
    libusbscanner script.
  - Fix epson.conf for Epson Perfection 2400 (bug #122328).


author: Tim Waugh <twaugh@redhat.com> 1.0.15-4
changelog:
  - Attempt to be more useful in libusbscanner by waiting a maximum of 30
    seconds.
  - Add a chcon call to libusbscanner (bug #140059).  Based on contribution
    from W. Michael Petullo.


author: Tim Waugh <twaugh@redhat.com> 1.0.15-7
changelog:
  - Updated libusbscanner script from Tomas Mraz, to use pam_console_apply.
  - Requires pam >= 0.78-2 for targetted pam_console_apply.


author: Nils Philippsen <nphilipp@redhat.com> - 1.0.17-4
changelog:
  - split off generated documentation into separate subpackage to avoid conflicts
    on multilib systems


author: Nils Philippsen <nphilipp@redhat.com> - 1.0.17-5
changelog:
  - buildrequire automake, autoconf, libtool (#178596)
  - don't require /sbin/ldconfig, /bin/mktemp, /bin/grep, /bin/cat, /bin/rm


author: Nils Philippsen <nphilipp@redhat.com> 1.0.17-10
changelog:
  - add pkg-config support, re-write sane-config to use pkg-config to avoid
    multilib problems with conflicting sane-config scripts


author: Nils Philippsen <nphilipp@redhat.com> 1.0.17-13
changelog:
  - split package into sane-backends, -devel, -libs, -programs to work around
    multilib issues (#135172)


author: Nils Philippsen <nphilipp@redhat.com> - 1.0.18-1
changelog:
  - version 1.0.18
  - unify spec file between OS releases
  - update rpath patch
  - remove obsolete newmodels patch
  - use *.desc created udev rules


author: Nils Philippsen <nphilipp@redhat.com> - 1.0.18-2
changelog:
  - remove unneeded programs subpackage
  - clean up docs vs. libs pkg split, mark documentation as %doc


author: Nils Philippsen <nphilipp@redhat.com> - 1.0.18-9
changelog:
  - don't tweak device names in device configuration files anymore (obsolete)
  - let udev rules cope with SUBSYSTEM=="usb" (#244444)
  - tweak-udev-rules patch is udev-098 patch now


author: Nils Philippsen <nphilipp@redhat.com> - 1.0.19-0.1.cvs20080206
changelog:
  - cvs snapshot 20080206
  - handle access control through hal/PolicyKit instead of udev (#405211)
  - drop obsolete badcode, logical_vs_binary, epson-cx5000, multilib, usb_reset,
    udev-symlink, udev-098 patches
  - update pkgconfig patch


author: Nils Philippsen <nphilipp@redhat.com> - 1.0.19-4
changelog:
  - guard against out-of-bounds string access in fujitsu backend (#429338, patch
    by Caolan McNamara)


author: Nils Philippsen <nphilipp@redhat.com> - 1.0.19-7
changelog:
  - remove ancient sane-devel obsoletes/provides
  - remove libs/doc/gphoto2 conditionals
  - fix build root
  - add arch-specific provides/requires (#436657)


author: Nils Philippsen <nils@redhat.com> - 1.0.19-13
changelog:
  - drop acinclude patch to not unnecessarily rebuild autoconf/libtool files
    which made libtool break builds on Rawhide
  - use "make DESTDIR=... install" instead of "%makeinstall"


author: Nils Philippsen <nils@redhat.com> - 1.0.19-15
changelog:
  - let sane-backends-devel require libjpeg-devel, libtiff-devel
  - update rpath patch (no longer touch sane-config.in as that is replaced
    anyway)
  - fix pkgconfig patch, bzip2 it


author: Nils Philippsen <nils@redhat.com> - 1.0.20-1
changelog:
  - version 1.0.20
  - rebase/remove patches
  - use %_isa for arch-specific requirements
  - place HAL fdi files in the correct place (#457645)


author: Nils Philippsen <nils@redhat.com> - 1.0.21-1
changelog:
  - version 1.0.21
  - remove obsolete rpath, hal, genesys-gl841-registers patches
  - update pkgconfig, udev, man-utf8->man-encoding, epson-expression800,
    docs-utf8 patches
  - remove hal conditional
  - package man pages


author: Nils Philippsen <nils@redhat.com> - 1.0.21-3
changelog:
  - build with -fno-strict-aliasing
  - use PIC/PIE because SANE-enabled software is likely to deal with data coming
    from untrusted sources (client <-> saned via network)


author: Nils Philippsen <nils@redhat.com> - 1.0.21-4
changelog:
  - xerox_mfp: correct color mode malfunction (#614949)
  - xerox_mfp: add USB id for SCX-4500W (#614948)


author: Nils Philippsen <nils@redhat.com> - 1.0.22-1
changelog:
  - version 1.0.22
  - remove obsolete i18n, xerox-mfp-color-mode, epson2-fixes, open-macro patches
  - update pkgconfig, udev, docs-utf8, v4l, man-encoding patches
  - submit patches upstream where this is applicable, add comments
  - manually install pkg-config file


author: Nils Philippsen <nils@redhat.com> - 1.0.22-4
changelog:
  - allow installing the libraries without the drivers (#736310): split off
    drivers into -drivers-scanners, rename -libs-gphoto2 to -drivers-cameras


author: Nils Philippsen <nils@redhat.com> - 1.0.22-4
changelog:
  - multilib: always use pkg-config in sane-config (#707910)
  - add USB id for Epson Stylus SX125 (#703529)


author: Nils Philippsen <nils@redhat.com> - 1.0.22-5
changelog:
  - multilib: let -devel depend on -drivers-* on F-16 and earlier (#740992)
  - multilib: make -drivers-scanners obsolete old -libs as well


author: Peter Robinson <pbrobinson@fedoraproject.org> - 1.0.22-7
changelog:
  - libs shouldn't depends on base package. Properly fix #736310
  - base package should obsolete -docs as it provides them not -libs
  - update spec to current standard


author: Nils Philippsen <nils@redhat.com> - 1.0.22-11
changelog:
  - multilib: enable -devel quirk regardless of version until a fixed mash gets
    into production (#829268)


author: Nils Philippsen <nils@redhat.com> - 1.0.23-1
changelog:
  - version 1.0.23
  - update udev patch, remove obsolete patches
  - use %_hardened_build macro from F-16 on instead of tweaking flags manually
  - don't use the same SONAME for backend libs and main lib


author: Nils Philippsen <nils@redhat.com> - 1.0.23-7
changelog:
  - filter out backend driver provides/requires
  - update latex build dep
  - umax: initialize reader_pid early in sane_start() (#853667)
  - coolscan2/3: support multi-scan option of some devices


author: Nils Philippsen <nils@redhat.com> - 1.0.23-11
changelog:
  - move documentation into separate doc subpackage (#977653)
  - remove ancient, unneeded obsoletes and conflicts


author: Nils Philippsen <nils@redhat.com> - 1.0.23-12
changelog:
  - describe missing flag "-b" in scanimage man page
  - add short help message to saned
  - fix bogus changelog dates


author: Nils Philippsen <nils@redhat.com> - 1.0.23-18
changelog:
  - build against libusb-1.0 on Fedora >= 18 (#1003193)
  - require libusbx-devel instead of libusb1-devel which is obsolete


author: Nils Philippsen <nils@redhat.com> - 1.0.24-1
changelog:
  - version 1.0.24
  - use (hopefully stable) Alioth download URL
  - update udev patch, remove obsolete patches
  - use udev hwdb instead of huge rulesets


author: Nils Philippsen <nils@redhat.com> - 1.0.24-14
changelog:
  - reformat and rename snprintf-cleanroom patch
  - backport USB3 xhci patch from upstream master (#1228954)


author: Nils Philippsen <nils@redhat.com> - 1.0.25-1
changelog:
  - version 1.0.25
  - remove obsolete patches: epson-expression800, hwdb, pixma_bjnp-crash,
    static-code-check, scsi-permissions, format-security, snprintf-license,
    usb3-xhci
  - update udev patch
  - ship umax_pp tool
  - remove comments containing macros
  - add weak dependency on backend drivers to libs subpackage


author: Nils Philippsen <nils@redhat.com> - 1.0.25-3
changelog:
  - use %license for license files
  - remove some obsolete cruft from the spec file
  - split off saned into daemon subpackage
  - add socket activation support for saned (#1091566)


author: Zdenek Dohnal <zdohnal@redhat.com> - 1.0.25-7
changelog:
  - 1428886 - CVE-2017-6318 sane-backends: SANE_NET_CONTROL_OPTION response packet may contain memory contents of the server [fedora-all]


author: Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-5
changelog:
  - requiring systemd-udev, because sane-backends puts files into its directories
    and own maindocdir


author: Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-9
changelog:
  - fixing configure option --with-usb
  - 1530216 - Samsung scanners need proprietary driver for working [Fedora-ALL]


author: Matej Habrnal <mhabrnal@redhat.com> 0.21-1
changelog:
  - New upstream version
    - Introduce 'serial' field in uReport
    - normalization: actualize list of functions


author: Jakub Filak <jakub@thefilaks.net> 0.22-1
changelog:
  - New upstream version
    - Added support fof JavaScript (V8) stack traces
    - Most parts of the in-hook core unwinder callable under unprivileged user
    - GDB core unwinder limits number of unwound frames
    - Fixed a pair of compile warnings - Chris Redmon <credmonster@gmail.com>


author: Matej Habrnal <mhabrnal@redhat.com> 0.23-1
changelog:
  - New upstream version
    - Allow rpm to be optional at build time
    - Do not use deprecated fedorahosted.org


author: Julius Milan <jmilan@redhat.com> 0.24-1
changelog:
  - New upstream version
    - Allow to report unpackaged problems
    - apidoc: generate html docs using doxygen
    - Fix parsing of subset of arm kernel oopses


author: Martin Kutlak <mkutlak@redhat.com> 0.25-1
changelog:
  - New upstream version
   - Normalization: actualize list of functions
   - Fix some compilation warnings
   - Allow to build python3 for rhel8
   - Makefile: add make release-* subcommands
   - Elfutils: Add missing stubs from earlier commit


author: Matej Habrnal <mhabrnal@redhat.com> 0.26-1
changelog:
  - spec: fix Allow python2 to be optional at build time
  - Allow python2 to be optional at build time
  - normalization: actualize list of functions
  - Append Python interpreter as related package
  - makefile: create .tar.xz with make release


author: Klaus Wenninger <kwenning@redhat.com> - 1.4.0-5
changelog:
  - rebase to upstream v1.4.0
  - finalize cmap connection if disconnected from cluster
  - make handling of cib-connection loss more robust
  - add ci test files
  - use generic term cluster-services in doc
  - stress in doc that on-disk metadata watchdog-timeout
    takes precedence
  - fail earlier on invalid servants to make gcc 9 happy

    Resolves: rhbz#1698056
    Resolves: rhbz#1682137


author: Klaus Wenninger <kwenning@redhat.com> - 1.4.0-9
changelog:
  - assume graceful pacemaker exit if leftovers are unmanaged
  - query corosync liveness via votequorum-api

    Resolves: rhbz#1702727
    Resolves: rhbz#1718296


author: Klaus Wenninger <kwenning@redhat.com> - 1.4.1-2
changelog:
  - silence coverity regarding inconsistent parameter passing
  - adapt fence-agents-dependency from upstream to distribution

    Resolves: rhbz#1769305


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 1.6.4-10
changelog:
  - Fix docdir patch (patch Makefile.am, not Makefile.in)
  - Use correct short name for Eclipse Public License 1.0
  - Use %license
  - Add explicit dependencies for libraries in Makefile.am (fixes FTBFS)
    Resolves: #1606302


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 1.6.4-14
changelog:
  - Fix getting of InstallDate property, improve it to work on non en_US locales
    and update support for recent Fedora distributions
    Resolves: #1776670


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 0.5.0-1
changelog:
  - Update to latest upstream version
  - Change license to Eclipse Public License 1.0
  - Use %license
  - Fix URL


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 1.4.9-10
changelog:
  - Fix null pointer (DoS) vulnerability via POST request to /cimom (CVE-2018-6644)
    (patch by Adam Majer)


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 1.4.9-16
changelog:
  - Use %license for file which contains the text of the license
  - Change versioned docdir to unversioned and rename the docdir to match
    the package name
  - Remove %defattr
    Resolves: #1638007


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 2.2.8-9
changelog:
  - Use %license for file which contains the text of the license
  - Change versioned docdir to unversioned and rename the docdir to match
    the package name
  - Fix license tag
    Resolves: #1638015


author: Michael Simacek <msimacek@redhat.com> - 2.10.6-7
changelog:
  - Port from deprecated add_maven_depmap to mvn_install
  - Remove unused BR felix-framework
  - Fix unowned directory


author: Michael Simacek <msimacek@redhat.com> - 2.10.6-11
changelog:
  - Correct license tag to include CC0 and Public Domain
  - Repack tarball to remove possibly proprietary binaries
  - Use %license macro


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 2.10.6-13
changelog:
  - Stop scaladoc from trying to bundle non-existent resources
  - Temporarly disable docs generation during build


author: Vojtech Polasek <vpolasek@redhat.com> - 0.1.48-4
changelog:
  - Drop rsyslog rules from OSPP profile
  - Update COBIT URI
  - Add rules for strong source of RNG entropy
  - Enable build of RHEL8 STIG Profile (RHBZ#1755447)
  - STIG profile: added rsyslog rules and updated SRG mappings
  - Split audit rules according to audit component (RHBZ#1791312)


author: Watson Sato <wsato@redhat.com> - 0.1.48-9
changelog:
  - Add and select zIPL bootloader rules in OSPP (rhbz#1886319)
  - Add support for remediation platforms


author: Jan iankko Lieskovsky <jlieskov@redhat.com> 0.1-2
changelog:
  - Provide manual page for scap-security-guide
  - Remove percent sign from spec's changelog to silence rpmlint warning
  - Convert RHEL6 'Restrict Root Logins' section's rules to Fedora
  - Convert RHEL6 'Set Password Expiration Parameter' rules to Fedora
  - Introduce 'Account and Access Control' section
  - Convert RHEL6 'Verify Proper Storage and Existence of Password Hashes' section's
    rules to Fedora
  - Set proper name of the build directory in the spec's setup macro.
  - Replace hard-coded paths with macros. Preserve attributes when copying files.


author: Jan iankko Lieskovsky <jlieskov@redhat.com> 0.1-3
changelog:
  - Add .gitignore for Fedora output directory
  - Set up Fedora release name and CPE based on build system properties
  - Use correct file paths in scap-security-guide(8) manual page
    (RH BZ#1018905, c#10)
  - Apply further changes motivated by scap-security-guide Fedora RPM review
    request (RH BZ#1018905, c#8):
    * update package description,
    * make content files to be owned by the scap-security-guide package,
    * remove Fedora release number from generated content files,
    * move HTML form of the guide under the doc directory (together
      with that drop fedora/content subdir and place the content
      directly under fedora/ subdir).
  - Fixes for scap-security-guide Fedora RPM review request (RH BZ#1018905):
    * drop Fedora release from package provided files' final path (c#5),
    * drop BuildRoot, selected Requires:, clean section, drop chcon for
      manual page, don't gzip man page (c#4),
    * change package's description (c#4),
    * include PD license text (#c4).


author: Jan iankko Lieskovsky <jlieskov@redhat.com> 0.1.3-1
changelog:
  - Update versioning scheme - move fedorassgrelease to be part of
    upstream version. Rename it to fedorassgversion to avoid name collision
    with Fedora package release.


author: Jan iankko Lieskovsky <jlieskov@redhat.com> 0.1.4-1
changelog:
  - Fix remediation for sshd set keepalive (ClientAliveCountMax) and move
    it to /shared
  - Add shared remediations for sshd disable empty passwords and
    sshd set idle timeout
  - Shared remediation for sshd disable root login
  - Add empty -compat subpackage to ensure backward-compatibility with
    openscap-content and firstaidkit-plugin-openscap packages (RH BZ#1040335)
  - OVAL check for sshd disable root login
  - Fix typo in OVAL check for sshd disable empty passwords
  - OVAL check for sshd disable empty passwords
  - Unselect no shelllogin for systemaccounts rule from being run by default
  - Rename XCCDF rules
  - Revert Set up Fedora release name and CPE based on build system properties
  - Shared OVAL check for Verify that Shared Library Files Have Root Ownership
  - Shared OVAL check for Verify that System Executables Have Restrictive Permissions
  - Shared OVAL check for Verify that System Executables Have Root Ownership
  - Shared OVAL check for Verify that Shared Library Files Have Restrictive
    Permissions
  - Fix remediation for Disable Prelinking rule
  - OVAL check and remediation for sshd's ClientAliveCountMax rule
  - OVAL check for sshd's ClientAliveInterval rule
  - Include descriptions for permissions section, and rules for checking
    permissions and ownership of shared library files and system executables
  - Disable selected rules by default
  - Add remediation for Disable Prelinking rule
  - Adjust service-enable-macro, service-disable-macro XSLT transforms
    definition to evaluate to proper systemd syntax
  - Fix service_ntpd_enabled OVAL check make validate to pass again
  - Include patch from Šimon Lukašík to obsolete openscap-content
    package (RH BZ#1028706)
  - Add OVAL check to test if there's is remote NTP server configured for
    time data
  - Add system settings section for the guide (to track system wide
    hardening configurations)
  - Include disable prelink rule and OVAL check for it
  - Initial OVAL check if ntpd service is enabled. Add package_installed
    OVAL templating directory structure and functionality.
  - Include services section, and XCCDF description for selected ntpd's
    sshd's service rules
  - Include remediations for login.defs' based password minimum, maximum and
    warning age rules
  - Include directory structure to support remediations
  - Add SCAP "replace or append pattern value in text file based on variable"
    remediation script generator
  - Add remediation for "Set Password Minimum Length in login.defs" rule


author: Jan iankko Lieskovsky <jlieskov@redhat.com> 0.1.5-1
changelog:
  - Fix fedora-srpm and fedora-rpm Make targets to work again
  - Include RHEL-6 and RHEL-7 datastream files to support remote RHEL system scans
  - EOL for Fedora 18 support
  - Include Fedora datastream file for remote Fedora system scans


author: Šimon Lukašík <slukasik@redhat.com> - 0.1.5-3
changelog:
  - Rebase the RHEL part of SSG to the latest upstream version (0.1.18)
  - Add STIG DISCLAIMER to the shipped documentation


author: Šimon Lukašík <slukasik@redhat.com> - 0.1.22-1
changelog:
  - update to the latest upstream release
  - only DataStream file is now available for Fedora
  - start distributing security baseline for Firefox
  - start distributing security baseline for Java RunTime deployments


author: Šimon Lukašík <slukasik@redhat.com> - 0.1.24-1
changelog:
  - update to the latest upstream release
  - created doc sub-package to ship all the guides
  - start distributing centos and scientific linux content
  - rename java content to jre


author: Jan iankko Lieskovsky <jlieskov@redhat.com> - 0.1.29-1
changelog:
  - Update to latest upstream SCAP-Security-Guide-0.1.29 release:
    https://github.com/OpenSCAP/scap-security-guide/releases/tag/v0.1.29
  - Do not ship Firefox/DISCLAIMER documentation file since it has been removed
    in 0.1.29 upstream release


author: Jan iankko Lieskovsky <jlieskov@redhat.com> - 0.1.30-1
changelog:
  - Update to latest upstream SCAP-Security-Guide-0.1.30 release:
    https://github.com/OpenSCAP/scap-security-guide/releases/tag/v0.1.30
  - Drop shell library for remediation functions since it is not required
    starting from 0.1.30 release any more


author: Martin Preisler <mpreisle@redhat.com> - 0.1.31-1
changelog:
  - update to the latest upstream release
  - new default location for content /usr/share/scap/ssg
  - install HTML tables in the doc subpackage


author: Watson Sato <wsato@redhat.com> - 0.1.35-1
changelog:
  - Update to latest upstream SCAP-Security-Guide-0.1.35 release:
    https://github.com/OpenSCAP/scap-security-guide/releases/tag/v0.1.35


author: Watson Yuuma Sato <wsato@redhat.com> - 0.1.36-1
changelog:
  - Update to latest upstream SCAP-Security-Guide-0.1.36 release:
    https://github.com/OpenSCAP/scap-security-guide/releases/tag/v0.1.36


author: Watson Yuuma Sato <wsato@redhat.com> - 0.1.37-1
changelog:
  - Update to latest upstream SCAP-Security-Guide-0.1.37 release:
    https://github.com/OpenSCAP/scap-security-guide/releases/tag/v0.1.37


author: Watson Yuuma Sato <wsato@redhat.com> - 0.1.38-1
changelog:
  - Update to latest upstream SCAP-Security-Guide-0.1.38 release:
    https://github.com/OpenSCAP/scap-security-guide/releases/tag/v0.1.38


author: Jan Černý <jcerny@redhat.com> - 0.1.39-1
changelog:
  - Update to latest upstream SCAP-Security-Guide-0.1.39 release:
    https://github.com/OpenSCAP/scap-security-guide/releases/tag/v0.1.39
  - Fix spec file to build using Python 3
  - Fix License because upstream changed to BSD-3


author: Watson Sato <wsato@redhat.com> - 0.1.40-3
changelog:
  - Use explicit path BuildRequires to get /usr/bin/python3 inside the buildroot
  - Only build content for rhel8 products


author: Watson Yuuma Sato <wsato@redhat.com> - 0.1.41-1
changelog:
  - Update to latest upstream SCAP-Security-Guide-0.1.41 release:
    https://github.com/ComplianceAsCode/content/releases/tag/v0.1.41
  - Add RHEL8 Product with OSPP4.2 and PCI-DSS Profiles


author: Matěj Týč <matyc@redhat.com> - 0.1.42-1
changelog:
  - Update to latest upstream SCAP-Security-Guide-0.1.42 release:
    https://github.com/ComplianceAsCode/content/releases/tag/v0.1.42
  - System-wide crypto policies are introduced for RHEL8
  - Patches introduced the RHEL8 product were dropped, as it has been upstreamed.


author: Matěj Týč <matyc@redhat.com> - 0.1.42-3
changelog:
  - Added FIPS mode rule for the OSPP profile.
  - Split the installed_OS_is certified rule.
  - Explicitly disabled OSP13, RHV4 and Example products.


author: Matěj Týč <matyc@redhat.com> - 0.1.42-5
changelog:
  - Fixed profiles descriptions, so they don't contain literal '\n'.
  - Made the configure_kerberos_crypto_policy OVAL more robust.
  - Made OVAL for libreswan and bind work as expected when those packages are not installed.


author: Matěj Týč <matyc@redhat.com> - 0.1.42-6
changelog:
  - Further fix of profiles descriptions, so they don't contain literal '\'.
  - Removed obsolete sshd rule from the OSPP profile.


author: Jan Černý <jcerny@redhat.com> - 0.1.42-7
changelog:
  - Introduce Podman backend for SSG Test suite
  - Update bind and libreswan crypto policy test scenarios


author: Matěj Týč <matyc@redhat.com> - 0.1.42-9
changelog:
  - Fixed Crypto Policy OVAL for NSS
  - Got rid of rules requiring packages dropped in RHEL8.
  - Profile descriptions fixes.


author: Gabriel Becker <ggasparb@redhat.com> - 0.1.42-11
changelog:
  - Assign CCE to rules from OSPP profile which were missing the identifier.
  - Fix regular expression for Audit rules ordering
  - Account for Audit rules flags parameter position within syscall
  - Add remediations for Audit rules file path
  - Add Audit rules for modification of /etc/shadow and /etc/gshadow
  - Add Ansible and Bash remediations for directory_access_var_log_audit rule
  - Add a Bash remediation for Audit rules that require ordering


author: Matěj Týč <matyc@redhat.com> - 0.1.44-2
changelog:
  - Ported changelog from late 8.0 builds.
  - Disabled build of the OL8 product, updated other components of the cmake invocation.


author: Milan Lysonek <mlysonek@redhat.com> - 0.1.45-2
changelog:
  - Use crypto-policy rules in OSPP profile.
  - Re-enable FIREFOX and JRE product in build.
  - Change test suite logging message about missing profile from ERROR to WARNING.
  - Build only one version of SCAP content at a time.


author: Watson Sato <wsato@redhat.com> - 0.1.46-1
changelog:
  - Update to latest upstream SCAP-Security-Guide-0.1.46 release
  - Align OSPP Profile with Common Criteria Requirements (RHBZ#1714798)


author: Pavlina Moravcova Varekova <pmoravco@redhat.com> - 1:2.0.2-9
changelog:
  - use %{?dist} instead of %{dist} (#1725774)
  - scl-utils-build own the pkgconfig directory by %scl_files (#1431962)


author: Pavlina Moravcova Varekova <pmoravco@redhat.com> - 1:2.0.2-10
changelog:
  - use %__python3 instead of macro %__python (#1733526)
  - corrected unescaped per-cent character in the changelog (#1734103)


author: Daniel Kopecek <dkopecek@redhat.com> - 2.5.2-14
changelog:
  Resolves: rhbz#1689897 - Missing '--extent-only' patch
  Resolves: rhbz#1630298 - Removal of component scrub or its crypto from RHEL


author: Danilo C. L. de Paula <ddepaula@redhat.com> - 1.11.0-1.el8
changelog:
  - Creating RHEL-8.0 initial branch based on 1.11.0
  - Resolves: bz#1515300
  - (Prepare seabios for RHEL-8.0)


author: Robert Scheck <robert@fedoraproject.org> - 8.15.2-27
changelog:
  - Use SSL_CTX_use_certificate_chain_file() to handle intermediate
    certificates passed additionally in confSERVER_CERT (#1565341)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.15.2-30
changelog:
  - Dropped sysvinit support
    Resolves: rhbz#1610287
  - Dropped hesiod support
    Resolves: rhbz#1638491


author: Vit Mojzis <vmojzis@redhat.com> - 4.2.1-3
changelog:
  - Use 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules}" ; export FFLAGS ; 
    FCFLAGS="${FCFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules}" ; export FCFLAGS ; 
    LDFLAGS="${LDFLAGS:--Wl,-z,relro  -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld}" ; export LDFLAGS instead of -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection


author: Vit Mojzis <vmojzis@redhat.com> - 3.3.19-2
changelog:
  - Update "missing" scripts to automake-1.15
  - Add active polling for acquiring policy file
  - Fix translation of hex values in AVCs (#1477236, #1709742)
  - require initscripts to ensure that "service" call works properly


author: Vit Mojzis <vmojzis@redhat.com> - 3.3.21-1
changelog:
  - Use dbus.mainloop.glib.DBusGMainLoop() instead of dbus.glib
  - Fix AVC.__typeMatch to handle aliases properly
  - Handle sockets with abstract path properly (#1775135)


author: Petr Lautrbach <plautrba@redhat.com> - 3.3.22-2
changelog:
  - Log plugin exception traceback when log level is DEBUG
  - sepolicy.info() returns a generator, not a list (#1784564)


author: Petr Lautrbach <plautrba@redhat.com> - 3.3.8-1
changelog:
  - Do not split If sentences to framework and plugins - requires
    setroubleshoot 3.3.13 at least - (rhbz#1210243, rhbz#1322734, rhbz#1115510)
  - Update translations


author: Petr Lautrbach <plautrba@redhat.com> - 3.3.10-1
changelog:
  - Handle no "allowed_target_types" properly
  - bind_ports: Do not use when there are no allowed_target_types
  - Fix summary and "if" text for AVCs with unknown target path
  - plugins: Update translations


author: Vit Mojzis <vmojzis@redhat.com> - 3.3.10-2
changelog:
  - update "file" plugin (#1649818)
  - Update "xen_image" plugin (#1649831)
  - Update qemu_blk_image and qemu_file_image (#1649838)


author: Nathan Scott <nathans@redhat.com> - 0.6.2-1
changelog:
  - Switch to enabling the Java 8+ maven modules only now.
  - Add unitsofmeasurement prefix to package name.
  - Update to latest upstream sources.


author: Alexander Bokovoy <abokovoy@redhat.com> - 0.56.2-1
changelog:
  - New upstream release
  - Update links to the upstream project page and releases
  - Use extended SSSD API to signal that an entry should not be cached anymore
  - Add support for timeout-based NSS queries with libsss_nss_idmap


author: Alexander Bokovoy <abokovoy@redhat.com> - 0.56.2-3
changelog:
  - Do not build on i686 in Fedora 28 or later as 389-ds-base is not available there anymore
  - Resolves rhbz#1556448
  - Remove outdated ExclusiveArch for RHEL6


author: Alexander Bokovoy <abokovoy@redhat.com> - 0.56.2-5
changelog:
  - Link with libnsl explicitly in Fedora 28 or later
  - Require libnsl2-devel for build
  - Resolves rhbz#1573636


author: Thomas Woerner <twoerner@redhat.com> - 0.56.3-3
changelog:
  - CVE 2021-3480:  idm:DL1/slapi-nis: NULL dereference (DoS) with specially crafted Binding DN
  - Resolves: RHBZ#1947350


author: Jindrich Novy <jnovy@redhat.com> - 0.4.0-1
changelog:
  - update to v.0.4.0
  - sync with fedora spec
  - drop applied CVE-2019-14378 patch
  - Resolves: #1766774


author: Rajeesh K V <rajeeshknambiar@fedoraproject.org> 6.1-1
changelog:
  - New upstream release with many enhancements and bugfixes
  - Metainfo file for AppData/Software Center
  - Drop patch for Fedora bug#803234 which is fixed upstream


author: Rajeesh K V <rajeeshknambiar@fedoraproject.org> 6.1-3
changelog:
  - Updated license for AnjaliOldLipi to OFL 1.1
  - Drop the email confirmation on AnjaliOldLipi license


author: Paul Wouters <pwouters@redhat.com> - 1.7.3.2-1
changelog:
  - Resolves rhbz#1404290 socat build failure on rawhide
  - Resolves rhbz#1416597 socat-1.7.3.2 is available
  - Resolves rhbz#1417483 Failed DNS resolution causes SIGSEGV and endless loop
  - Removed obsoleted patch


author: Nikos Mavrogiannopoulos <nmav@redhat.com> - 2.3.0-3
changelog:
  - Remove softhsm2-pk11install. Software modules are to be registered with
    p11-kit as in https://fedoraproject.org/wiki/PackagingDrafts/Pkcs11Support (#1541095).


author: Jake Hunsaker <jhunsake@redhat.com> - 1.6-1
changelog:
  - Drop paramiko dependency, use OpenSSH ControlPersist instead
  - Layered cluster profiles can now accept base profile options
  - Debian/Ubuntu hosts now supported


author: Jake Hunsaker <jhunsake@redhat.com> - 1.7-1
changelog:
  - New upstream release
  - Overhaul mechanism of execution of sosreport in containers
  - Added RHCOS support
  - Added a 'none' cluster type


author: Jake Hunsaker <jhunsake@redhat.com> - 1.7-2
changelog:
  - Fix 'none' cluster type enablement
  - Update RHCOS image to RHEL 8 version
  - Fix execution from within a container


author: Sérgio Basto <sergio@serjux.com> - 1.9.2-1
changelog:
  - Update to 1.9.2 (#961876).
  - Modernize spec file.
  - Makefile.am handles mmx and sse flags well, so no need patch 01 and sed anymore.
  - Patch 02 disabled, I hope we already have asm fixed on X86_64.


author: Sérgio Basto <sergio@serjux.com> - 1.9.2-2
changelog:
  - Add license tag.
  - Add back sed on -O3 .
  - Not modify soundtouch_config.h because looks correct, just have one line !.


author: Ondřej Lysoněk <olysonek@redhat.com> - 3.4.2-1
changelog:
  - New version
  - Fixes CVE-2017-15705, CVE-2018-11780 and CVE-2018-11781
  - Resolves: rhbz#1629523
  - Resolves: rhbz#1629535
  - Resolves: rhbz#1629538


author: Ondřej Lysoněk <olysonek@redhat.com> - 3.4.2-2
changelog:
  - Support systemd, not SysV init, drop initscripts requirement
  - Resolves: rhbz#1610288
  - Fix issues found by Coverity Scan
  - Resolves: rhbz#1602695


author: Miroslav Lichvar <mlichvar@redhat.com> - 1.2.0-1
changelog:
  - update to 1.2.0
  - use macro for ldconfig scriptlets
  - add gcc to build requirements
  - include soname in file list
  - use license macro


author: Adam Jackson <ajax@redhat.com> 0.7.39-2
changelog:
  - Rebuild to break bogus libpng dependency
  - Fix summaries for gtk3 subpackages to not talk about gtk2


author: Hans de Goede <hdegoede@redhat.com> - 0.11-4
changelog:
  - Add missing BuildRequires: usbutils, so that we get proper USB device
    descriptions in the USB device selection menu


author: Christophe Fergeau <cfergeau@redhat.com> - 0.11-5
changelog:
  - Fix build on PPC
  - Remove ExclusiveArch. While spice-gtk will build on ARM and PPC, it
    hasn't been tested on these arch, so there may be some bugs.


author: Christophe Fergeau <cfergeau@redhat.com> 0.25-6
changelog:
  - Run make install in gtk3 build after doing so in gtk2 build, otherwise
    we'll end up packaging gtk2 builds of spicy et al in spice-client-tools
    instead of gtk3 ones (#1145829)


author: Christophe Fergeau <cfergeau@redhat.com> 0.28-2
changelog:
  - Add upstream patch fixing an USB redirection crash
    Resolves: rhbz#1182226
  - Adjust build requires to new naming of phodav package


author: Christophe Fergeau <cfergeau@redhat.com> 0.32-2
changelog:
  - Add upstream patches fixing USB event thread leak
    Resolves: rhbz#1217202 (virt-manager)
    May help with rhbz#1338042 (gnome-boxes)


author: Cole Robinson <crobinso@redhat.com> - 0.33-5
changelog:
  - channel-usbredir: Fix crash on channel-up. Resolves: rhbz#1399838
  - usbutils no longer ships usb.ids, it is hwdata now, set path manually.
  - Backport fixes for "Couldn't find current GL or GLX context" Resolves: rhbz#1461802


author: Christophe Fergeau <cfergeau@redhat.com> 0.12.10-1
changelog:
  - Update to 0.12.10 - Add python scripts and .proto files used
    to generate spice-gtk/spice-server marshalling C code


author: Gerd Hoffmann <kraxel@redhat.com> - 0.5.2-2
changelog:
  - Fix license: LGPL.
  - Cleanup specfile, drop bits not needed any more with
    recent rpm versions (F13+).
  - Use optflags as-is.
  -


author: Hans de Goede <hdegoede@redhat.com> - 0.6.3-2
changelog:
  - Various bugfixes from upstream git:
    - Make spicec work together with the Firefox XPI for RHEV-M
    - Make sure the spicec window gets properly raised when first shown


author: Hans de Goede <hdegoede@redhat.com> - 0.6.3-3
changelog:
  - Log to ~/.spicec/cegui.log rather then to CEGUI.log in the cwd, this
    fixes spicec from aborting when run in a non writable dir (#650253)


author: Hans de Goede <hdegoede@redhat.com> - 0.6.3-4
changelog:
  - Fix the info layer not showing when used through the XPI
  - Do not let the connection gui flash by when a hostname has been specified
    on the cmdline
  - Fix spice client locking up when dealing with XIM input (#654265)
  - Fix modifier keys getting stuck (#655048)
  - Fix spice client crashing when dealing with XIM ibus input (#655836)
  - Fix spice client only showing a white screen in full screen mode


author: Hans de Goede <hdegoede@redhat.com> - 0.8.0-2
changelog:
  - Fix being unable to send ctrl+alt+key when release mouse is bound to
    ctrl+alt (which can happen when used from RHEV-M)


author: Alon Levy <alevy@redhat.com>
changelog:
  - Fix mjpeg memory leak and bad behavior.
  - Add usbredir to list of channels for security purposes. (#819484)


author: Soren Sandmann <ssp@redhat.com> - 0.11.3-1
changelog:
  - Add capability patches
  - Add capability patches to the included copy of spice-protocol

      Please see the comment above Patch6 and Patch7
      regarding this situation.


author: Hans de Goede <hdegoede@redhat.com> - 0.12.4-1
changelog:
  - New upstream bug-fix release 0.12.4
  - Add patches from upstream git to fix sound-channel-free crash (rhbz#986407)
  - Add Obsoletes for dropped spice-client sub-package


author: Christophe Fergeau <cfergeau@redhat.com> 0.12.5-5
changelog:
  - Fix advertised sound playback/recording rates in public headers
    Resolves: rhbz#1129961 (QEMU would need a rebuild though)


author: Christophe Fergeau <cfergeau@redhat.com> 0.12.5-8
changelog:
  - Add upstream patch avoiding a regression in spice-protocol 0.12.8 which
    breaks SPICE support in QEMU


author: Christophe Fergeau <cfergeau@redhat.com> 0.12.5-9
changelog:
  - Drop patch added in previous build which is no longer needed with
    spice-protocol 0.12.9 (and actually is actually breaking QEMU compilation
    without an additional patch)


author: Christophe Fergeau <cfergeau@redhat.com> 0.13.1-1
changelog:
  - Update to 0.13.1 release. This is a development release, but by the
    time Fedora 25 gets released, a stable 0.14.0 should be released.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - first build against glibc
  - patched out the use of setresuid(), which is available only on kernels
    2.1.44 and later


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - updated the init script to use reconfigure option to restart squid instead
    of shutdown/restart (both safer and quicker)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - cache & log dirs shouldn't be world readable
  - remove preun script (leave logs & cache @ uninstall)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - switch to using group squid
  - turn off icmp (insecure)
  - update to 2.2.DEVEL3
  - build FAQ docs from source


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix compliance with ftp RFCs
    (http://www.wu-ftpd.org/broken-clients.html)
  - Work around a bug in some versions of autoconf
  - BuildPrereq sgml-tools - we're using sgml2html


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix init script again (#11699)
  - add --enable-delay-pools (#11695)
  - update to STABLE3
  - update FAQ


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix path references in QUICKSTART (#15114)
  - fix initscript translations (#24086)
  - fix shutdown logic (#24234), patch from <jos@xos.nl>
  - add /etc/sysconfig/squid for daemon options & shutdown timeouts
  - three more bugfixes from the Squid people
  - update FAQ.sgml
  - build and ship auth modules (#23611)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update to 2.4.STABLE1 + patches
  - enable some more configure options (#24981)
  - oops, ship /etc/sysconfig/squid


author: Bill Nottingham <notting@redhat.com>
changelog:
  - 2.4.STABLE3 + patches
  - turn off HTCP at request of maintainers
  - leave SNMP enabled in the build, but disabled in the default config


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE3-0
changelog:
  - Spec file change to enable the nul storage module. bugzilla #74654
  - Upgrade to 2.5STABLE3 with current official patches.
  - Added --enable-auth="basic,ntlm": closes bugzilla #90145
  - Added --with-winbind-auth-challenge: closes bugzilla #78691
  - Added --enable-useragent-log and --enable-referer-log, closes
  - bugzilla #91884


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE4-1
changelog:
  - New upstream version.
  - Fix the Source: line in this spec file to point to the correct URL.
  - redo the -location patch to work with the new upstream version.


author: Jay Fenlason <fenlason@redhat.com>
changelog:
  - Incorporate many upstream patches
  - Include many spec file changes from D.Johnson <dj@www.uk.linux.org>


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE4-3
changelog:
  - Clean up the spec file to work on 64-bit platforms (use %{_libdir}
    instead of /usr/lib, etc)
  - Make the release number in the changelog section agree with reality.
  - use -fPIE rather than -fpie.  s390 fails with just -fpie


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE5-1
changelog:
  - New upstream version, obsoletes many patches.
  - Fix --datadir passed to configure.  Configure automatically adds /squid
    so we shouldn't.
  - Remove the problematic triggerpostun trigger, since is's broken, and FC2
    never shipped with that old version.
  - add %{?_smp_mflags} to make line.


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE5-2
changelog:
  - Include the first 10 upstream patches
  - Add a patch for the correct location of the winbindd pipe.  This closes
    bugzilla #107561
  - Remove the change to ssl_support.c from squid-2.5.STABLE3-build patch
    This closes #117851
  - Include /etc/pam.d/squid .  This closes #113404
  - Include a patch to close #111254 (assignment in assert)
  - Change squid.init to put output messages in /var/log/squid/squid.out
    This closes #104697
  - Only useradd the squid user if it doesn't already exist, and error out
    if the useradd fails.  This closes #118718.


author: Jay Fenlason <fenlason@redhat.com> 7:2.5STABLE5-5
changelog:
  - Merge current upstream patches.
  - Fix the -pipe patch to have the correct name of the winbind pipe.


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE6-1
changelog:
  - New upstream version, with 32 upstream patches.
    This closes #133970, #133931, #131728, #128143, #126726

  - Change the permissions on /etc/squid/squid.conf to 640.  This closes
    bugzilla #125007


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE6-3
changelog:
  - include patch from Ulrich Drepper <drepper@redhat.com> to stop
    problems with O_NONBLOCK.  This closes #136049


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE7-1
changelog:
  - new upstream version, with 3 upstream patches.
    Updated the -build and -config patches
  - Include patch from Ulrich Drepper <frepper@redhat.com> to more
    intelligently close all file descriptors.


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE7-2
changelog:
  - Add a triggerin on samba-common to make /var/cache/samba/winbindd_privileged
    accessable so that ntlm_auth will work.  It needs to be in this rpm,
    because the Samba RPM can't assume the squid user exists.
    Note that this will only work if the Samba RPM is recent enough to create
    that directory at install time instead of at winbindd startup time.
    That should be samba-common-3.0.0-15 or later.
    This fixes bugzilla #103726
  - Clean up extra whitespace in this spec file.
  - Add additional upstream patches. (Now 18 upstream patches).
  - patch #112 closes CAN-2005-0096 and CAN-2005-0097, remote DOS security holes.
  - patch #113 closes CAN-2005-0094, a remote buffer-overflow DOS security hole.
  - patch #114 closes CAN-2005-0095, a remote DOS security hole.
  - Remove the -nonbl (replaced by #104) and -close (replaced by #111) patches, since
    they're now fixed by upstream patches.


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE7-4
changelog:
  - Include two more upstream patches for security vulns:
    bz#146783 Correct handling of oversized reply headers
    bz#146778 CAN-2005-0211 Buffer overflow in WCCP recvfrom() call


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE8-2
changelog:
  - new upstream version with 4 upstream patches.
  - Reorganize spec file to apply upstream patches first


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE9-4
changelog:
  - More upstream patches, including the fixed 2GB patch.
  - include the -libbind patch, which prevents squid from using the optional
    -lbind library, even if it's installed.


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE9-6
changelog:
  - More upstream patches, including a fix for
    bz#157456 CAN-2005-1519 DNS lookups unreliable on untrusted networks


author: Martin Stransky <stransky@redhat.com> 7:2.5.STABLE10-1
changelog:
  - new upstream version
  - enabled fakeauth utility (#154020)
  - enabled digest authentication scheme (#155882)
  - all error pages marked as config (#127836)
  - patch for 64bit statvfs interface (#153274)
  - added httpd config file for cachemgr.cgi (#112725)


author: Martin Stransky <stransky@redhat.com> 7:2.5.STABLE10-3
changelog:
  - removed "--enable-truncate" option (#165948)
  - added "--enable-cache-digests" option (#102134)
  - added "--enable-ident-lookups" option (#161640)
  - some clean up (#165949)


author: Martin Stransky <stransky@redhat.com> 7:2.5.STABLE11-5
changelog:
  - fix for #171213 - CVE-2005-3258 Squid crash due to malformed FTP response
  - more fixes from upstream


author: Martin Stransky <stransky@redhat.com> 7:2.5.STABLE12-2
changelog:
  - rewriten patch squid-2.5.STABLE10-64bit.patch, it works with
    "--with-large-files" option now
  - fix for #72896 - squid does not support > 1024 file descriptors,
    new "--enable-fd-config" option for it.


author: Martin Stransky <stransky@redhat.com> - 7:2.6.STABLE1-1
changelog:
  - new upstream + the latest CVS snapshot from 2006/07/18
  - updated fd config patch
  - enabled epoll
  - fixed release format (#197405)
  - enabled WCCPv2 support (#198642)


author: Martin Stransky <stransky@redhat.com> - 7:2.6.STABLE4-2
changelog:
  - upstream fixes:
    * Accept 00:00-24:00 as a valid time specification (upstream BZ #1794)
    * aioDone() could be called twice
    * Squid reconfiguration (upstream BZ #1800)


author: Martin Stransky <stransky@redhat.com> - 7:2.6.STABLE4-3
changelog:
  - added fix for #183869 - squid can abort when getting status
  - added upstream fixes:
      * Bug #1796: Assertion error HttpHeader.c:914: "str"
      * Bug #1779: Delay pools fairness, correction to first patch
      * Bug #1802: Crash on exit in certain conditions where cache.log is not writeable
      * Bug #1779: Delay pools fairness when multiple connections compete for bandwidth
      * Clarify the select/poll/kqueue/epoll configure --enable/disable options
  - reworked fd patch for STABLE4


author: Martin Bacovsky <mbacovsk@redhat.com> - 7:2.6.STABLE16-2
changelog:
  - our fd_config patch was replaced by upstream's version 
  - Source1 (FAQ.sgml) points to local source (upstream's moved to wiki)


author: Martin Nagy <mnagy@redhat.com> - 7:3.0.STABLE2-1
changelog:
  - upgrade to latest upstream 3.0.STABLE2
  - check config file before starting (#428998)
  - whitespace unification of init script
  - some minor path changes in the QUICKSTART file
  - configure with the --with-filedescriptors=16384 option


author: Martin Nagy <mnagy@redhat.com> - 7:3.0.STABLE5-2
changelog:
  - fix configure detection of netfilter kernel headers (#435499),
    patch by aoliva@redhat.com
  - add support for negotiate authentication (#445337)


author: Jiri Skala <jskala@redhat.com> - 7:3.0.STABLE7-2
changelog:
  - used ncsa_auth.8 from man-pages. there will be this file removed due to conflict
  - fix #458593 noisy initscript
  - fix #463129 init script tests wrong conf file
  - fix #450352 - build.patch patches only generated files


author: Henrik Nordstrom <henrik@henriknordstrom.net> - 7:3.0.STABLE13-2
changelog:
  - backported logfile.cc syslog parameters patch from 3.1 (b9443.patch)
  - GCC-4.4 workaround in src/wccp2.cc


author: Henrik Nordstrom <henrik@henriknordstrom.net> - 7:3.0.STABLE17-2
changelog:
  - Bug #514014, update to 3.0.STABLE17 fixing the denial of service issues
    mentioned in Squid security advisory SQUID-2009_2.


author: Henrik Nordstrom <henrik@henriknordstrom.net> - 7:3.1.0.13-1
changelog:
  - Upgrade to next upstream release 3.1.0.13 with many new features
    * IPv6 support
    * NTLM-passthru
    * Kerberos/Negotiate authentication scheme support
    * Localized error pages based on browser language preferences
    * Follow X-Forwarded-For capability
    * and more..


author: Henrik Nordstrom <henrik@henriknordstrom.net> - 7:3.1.0.13-7
changelog:
  - Include upstream patches fixing important operational issues
  - Enable ESI support now that it does not conflict with normal operation


author: Jiri Skala <jskala@redhat.com> 7:3.1.0.14-2
changelog:
  - fixed #532930 Syntactic error in /etc/init.d/squid
  - fixed #528453 cannot initialize cache_dir with user specified config file


author: Henrik Nordstrom <henrik@henriknordstrom.net> - 7:3.1.0.15-3
changelog:
  - fixed #551302 PROXY needs libcap. Also increases security a little.
  - merged relevant upstream bugfixes waiting for next 3.1 release


author: Jiri Skala <jskala@redhat.com> - 7:3.1.0.16-4
changelog:
  - spec file modified to be fedora packaging guidline compliant
  - little shifting lines in init script header due to rpmlint complaint
  - fixes assertion during start up


author: Henrik Nordstrom <henrik@henriknordstrom.net> - 7:3.1.0.16-6
changelog:
  - Patch for Squid security advisory SQUID-2010:2, denial of service
    issue in HTCP processing (CVE-2010-0639)


author: Henrik Nordstrom <henrik@henriknordstrom.net> - 7:3.1.1-2
changelog:
  - Update to 3.1.1 Squid bug #2827 crash with assertion failed:
    FilledChecklist.cc:90: "conn() != NULL" under high load.


author: Jiri Skala <jskala@redhat.com>
changelog:
  - fixes #548903 - "comm_open: socket failure: (97) Address family not supported by protocol" if IPv6 disabled


author: Henrik Nordstrom <henrik@henriknordstrom.net> - 7:3.1.3-2
changelog:
  - Fully fix #548903 - "comm_open: socket failure: (97) Address family not supported by protocol" if IPv6 disabled
  - Various IPv6 related issues fixed, making tcp_outgoing_address behave
    as expected and no commResetFD warnings when using tproxy setups.


author: Henrik Nordstrom <henrik@henriknordstrom.net> - 7:3.1.4-1
changelog:
  - Upstream 3.1.4 bugfix release, issues relating to IPv6, TPROXY, Memory
    management, follow_x_forwarded_for, and stability fixes


author: Henrik Nordstrom <henrik@henriknordstrom.net> - 7:3.1.5-2
changelog:
  - Upstream 3.1.5 bugfix release
  - Upstream patch for Bug #614665: Squid crashes with  ident auth
  - Upstream patches for various memory leaks


author: Jiri Skala <jskala@redhat.com> - 7:3.2.0.9-1
changelog:
  - upgrade to squid-3.2
  - fixes #720445 - Provide native systemd unit file
  - SysV initscript moved to subpackage
  - temproary disabled eCap


author: Jiri Skala <jskala@redhat.com> - 7:3.2.0.13-2
changelog:
  - fixes #747103 - squid does not start if /var/spool/squid is empty
  - fixes #747110 - squid does not start adding "memory_pools off"


author: Henrik Nordstrom <henrik@henriknordstrom.net> - 7:3.2.0.14-6
changelog:
  - upstream gcc-4.7 patch
  - fix for bug #772483 running out of memory, mem_node growing out of bounds


author: Michal Luscon <mluscon@redhat.com> - 7:3.2.3-2
changelog:
  - Resolved: #854356 - squid.service use PIDFile
  - Resolved: #859393 - Improve cache_swap script
  - Resolved: #791129 - disk space warning
  - Resolved: #862252 - reload on VPN or network up/down
  - Resolved: #867531 - run test suite during build
  - Resolved: #832684 - missing after dependency nss-lookup.target
  - Removed obsolete configure options


author: Michal Luscon <mluscon@redhat.com> - 7:3.2.9-1
changelog:
  - Update to latest upstream version 3.2.9
  - Fixed: CVE-2013-1839
  - Removed: makefile-patch (+make check)


author: Ville Skyttä <ville.skytta@iki.fi> - 7:3.3.4-2
changelog:
  - Fix basic auth and log daemon DB helper builds.
  - Use xz compressed tarball, fix source URLs.
  - Fix bogus dates in %changelog.


author: Michal Luscon <mluscon@redhat.com> - 7:3.3.9-1
changelog:
  - Update to latest upstream version 3.3.9
  - Fixed #976815: file descriptors are hard coded to 16384
  - Fixed: active ftp crashing
  - Fixed: offset of patches


author: Michal Luscon <mluscon@redhat.com> - 7:3.4.1-1
changelog:
  - Rebase to latest stable upstream release 3.4.1
  - Fixed #1034306: fails to build for AArch64
  - Fixed: active ftp


author: Henrik Nordstrom <henrik@henriknordstrom.net> - 7:3.4.12-1
changelog:
  - Update to latest upstream version 3.4.12
  - bug #1173946: Disable -march=native compile time optimization, use Fedora defaults.


author: Henrik Nordstrom <henrik@henriknordstrom.net> - 7:3.5.2-2
changelog:
  - Update to latest upstream version 3.5.2
  - Remove deprecated (and renamed) squid_msnt_auth basic auth helper. Only
    performs LM authentication and not considered useful in todays networks.


author: Luboš Uhliarik <luhliari@redhat.com> - 7:3.5.13-3
changelog:
  - Resolves: #1308866 - CVE-2016-2390 squid: incorrect server error 
    handling resulting in denial of service


author: Luboš Uhliarik <luhliari@redhat.com> - 7:3.5.15-1
changelog:
  - new version 3.5.15
  - Resolves: #1311585 - squid: Multiple Denial of Service issues in
    HTTP Response processing
  - Resolves: #1312267 - squid: SQUID-2016_2 advisory, multiple DoS issues


author: Luboš Uhliarik <luhliari@redhat.com> - 7:4.0.23-5
changelog:
  - Resolves: #1585617 - Build against libdb only instead of libdb4
  - disabled strict checking for now (squid can not be built with GCC8)


author: Lubos Uhliarik <luhliari@redhat.com> - 7:4.4-1
changelog:
  - Resolves: #1656871 - squid rebase to 4.4
  - Resolves: #1645148 - CVE-2018-19131 squid: Cross-Site Scripting when
    generating HTTPS response messages about TLS errors
  - Resolves: #1645156 - CVE-2018-19132 squid: Memory leak in SNMP query
    rejection code


author: Lubos Uhliarik <luhliari@redhat.com> - 7:4.4-6
changelog:
  - Resolves: #1679526 - Missing detailed configuration file
  - Resolves: #1703117 - RHEL 7 to 8 fails with squid installed because dirs
    changed to symlinks
  - Resolves: #1691741 - Squid cache_peer DNS lookup failed when not all lower
    case
  - Resolves: #1683527 - "Reloading" message on a fresh reboot after enabling
    squid


author: Lubos Uhliarik <luhliari@redhat.com> - 7:4.4-8
changelog:
  - Resolves: # 1738485 - CVE-2019-12527 squid:4/squid: heap-based buffer overflow
    in HttpHeader::getAuth


author: Lubos Uhliarik <luhliari@redhat.com> - 7:4.4-8.1
changelog:
  - Resolves: #1828368 - CVE-2019-12519 squid: improper check for new member in
    ESIExpression::Evaluate allows for stack buffer overflow
  - Resolves: #1828367 - CVE-2020-11945 squid: improper access restriction upon
    Digest Authentication nonce replay could lead to remote code execution
  - Resolves: #1829402 - CVE-2019-12525 squid:4/squid: parsing of header
    Proxy-Authentication leads to memory corruption


author: Lubos Uhliarik <luhliari@redhat.com> - 7:4.4-8.2
changelog:
  - Resolves: #1872345 - CVE-2020-15811 squid:4/squid: HTTP Request Splitting
    could result in cache poisoning
  - Resolves: #1872330 - CVE-2020-15810 squid:4/squid: HTTP Request Smuggling
    could result in cache poisoning


author: Lubos Uhliarik <luhliari@redhat.com> - 7:4.4-8.3
changelog:
  - Resolves: #1944258 - CVE-2020-25097 squid:4/squid: improper input validation
    may allow a trusted client to perform HTTP Request Smuggling


author: Stephen Gallagher <sgallagh@redhat.com> - 2.3.3-5
changelog:
  - Autodetect the minimum key strength from the system security level.
  - Autodetect the hash algorithm to use from the system security level.
  - Disallow setting a key strength below the system minimum.
  - Resolves: rhbz#1653323


author: Parag Nemade <pnemade AT redhat DOT com> - 1.1.0-7
changelog:
  - Add metainfo file to show this font in gnome-software
  - Remove %clean section which is optional now
  - Remove buildroot which is optional now
  - Remove removal of buildroot in %install
  - Remove group tag


author: Dennis Keefe <dkeefe@redhat.com> - 2.0.0-2
changelog:
  - Update to 2.0.0
  - Allow the user to interact with the daemon under conditions
    where a pool, filesystem, or blockdev is not fully functional.
  - Resolves: rhbz#1730493
  - Establish an environment variable for D-Bus timeout parameter.
  - Resolves: rhbz#1678631
  - Return detailed error messages on all error-appearing user actions.
  - Resolves: rhbz#1642393
  - Resolves: rhbz#1687869
  - Exit with error code 0 and error message on stderr for all command-line
    parsing errors.
  - Resolves: rhbz#1747564
  - Show more complete error messages on D-Bus method call failures.
  - Resolves: rhbz#1717460
  - Add version numbers to required packages
  - Resolves: rhbz#1717489


author: Dennis Keefe <dkeefe@redhat.com> - 2.0.0-4
changelog:
  - Update to 2.0.0
  - Resolves: rhbz#1760906
  - Fix a bug where last update time for variable length metadata was not set
    properly on startup:
  - Resolves: rhbz#1720399
  - Specify path of PID file as "/run/stratisd.pid" instead of 
    "/var/run/stratisd.pid".
  - Resolves: rhbz#1754649
  - For a particular log entry, reduce log level from INFO to DEBUG and make the
    log message more detailed:
  - Resolves: rhbz#1680052


author: Bastien Nocera <bnocera@redhat.com> - 1.1-1
changelog:
  + switcheroo-control-1.1-1
  - Update to 1.1
  - Don't throw errors when the machine doesn't have dual-GPU (#1391212)


author: Michal Sekletár <msekleta@redhat.com> - 11.7.3-2
changelog:
  - sysstat's buildsystem doesn't really use LDFLAGS, we have to merge CFLAGS and LDFLAGS to get binaries with full RELRO (#1624177)


author: Andy Grover <agrover@redhat.com> - 2.0rc1.fb2-1
changelog:
  - New upstream source and release
  - Remove patches:
    * targetcli-git-version.patch
    * 0001-Remove-ads-from-cli-welcome-msg.-Mention-help-is-ava.patch
    * 0002-bundle-lio-utils.patch
    * 0003-Hack.-dump-scripts-aren-t-in-PATH-anymore-so-call-th.patch
    * 0004-ignore-errors-from-failure-to-set-device-attributes.patch
    * 0005-fix-spec_root-path.patch
    * 0006-add-docs.patch
    * 0007-all-start.patch


author: Andy Grover <agrover@redhat.com> - 2.0rc1.fb5-2
changelog:
  - Update After= in service file to wait for localfs and network
  - Improve description in service file


author: Andy Grover <agrover@redhat.com> - 2.0rc1.fb18-1
changelog:
  - New upstream release
  - Add python-ethtool requires
  - Update Source0 to use Github tar-from-tag instead of Downloads


author: Andy Grover <agrover@redhat.com> - 2.1.fb31-1
changelog:
  - New upstream version
  - Move service handling to python-rtslib
  - Remove old packaging bits: clean, buildroot, defattr


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - separate package for libpcap.
  - update tcpdump to 3.4, libpcap to 0.4.
  - added arpwatch (but disabled for now)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - include A. Kuznetsov's patches to libpcap/tcpdump.
  - added arpsnmp to package (#3258).
  - arp2ethers written for different of awk (#4326).


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - remove sparc64 SIOCGIFNAME hack, not needed with (at least) kernel 2.2.12-40.
  - upgrade to ANK ss991030 snapshot with pcap magic fix (#6773).
  - add getprotobyname lookup (#6725).
  - getservbyname port lookup appears functional (#7569).
  - remove uid 2090 backdoor (sorry Dave) (#7116).


author: Matt Wilson <msw@redhat.com>
changelog:
  - source /etc/init.d/functions
  - back out /etc/init.d/arpwatch, place file in /etc/rc.d
  - move initscript to /etc/init.d
  - changed initscript to use start() and stop() functions
  - added condrestart to init script
  - added %post %preun %postun scripts to register arpwatch script
  - added Prereq: for all things needed in post/preun/postun


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - eliminate more buffer overflows (from FreeBSD) (#20069).
  - 802.1q ether type incorrect (#19850).
  - add -u flag to drop arpwatch privs (#19696).


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - tcpdump: spice up the manpage about interfaces
  - tcpdump: add 'all' and 'any' keywords to -i, saner default behaviour.
  - upgrade arpwatch to 2.1a10


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - Initial packaging with latest tcpdump.org CVS tcpdump-3.6 and libpcap-0.6.
  - add earlier print-domain.c, the latest is segfaulting
  - don't unnecesessarily include snprintf.o, it didn't compile with gcc 2.96 anyway
  - don't use savestr, require openssl, tweak tweak tweak
  - add tcpslice, patch it a bit for egcs detection


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - Update to 20010108 CVS, disable some upstreamed patches.
  - Change some additional .1 pages to .8.
  - Add droproot patch, some --usage and man page fixes.


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - Make SMB printing output a lot more quiet unless in verbose mode.
  - Make -n resolve port/protocol numbers but not hostnames, -nn for no
    resolving at all
  - Separate droproot patch from a more generic man/usage fix one
  - Add non-promiscuous mode -by default patch, but don't apply it by default


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - use --enable-ipv6
  - Add two patches from CVS to enhance 802.2 printing, and more importantly,
    to be able to specify 'no stp'


author: Harald Hoyer <harald@redhat.com>
changelog:
  - fixed EINTR stopping for e.g. SIGSTOP. (#22008)
  - added -u option for tcpdump (#20231)
  - new arpwatch version (#23172)
  - added "all" and "one" interface for -i (#20907)
  - added arpwatch sysconfig (#23172)


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - fix building of tcpslice on glibc 2.2.2 (time.h)
  - disable /etc/init.d requirement and fix %post scripts in arpwatch


author: Harald Hoyer <harald@redhat.de> 12:3.6.2-10
changelog:
  - took old purge patch for filters
  - fixed #54225,#58346
  - drop root by default #49635
  - fixed #54593
  - fixed #57711


author: Harald Hoyer <harald@redhat.com> - 14:3.8.2-1
changelog:
  - update to tcpdump-3.8.2, libpcap-0.8.2, arpwatch-2.1a13
  - patched tcpdump configure for gcc34 optimizations
  - removed obsolete patches


author: Ivana Varekova <varekova@redhat.com> - 14:3.8.2-9
changelog:
  - added arpsnmp options to specify sender and recipient
    and corrected arpwatch and arpsnmp man pages (#70386)


author: Martin Stransky <stransky@redhat.com> - 14:3.9.3-1
changelog:
  - New upstream version - 3.9.3
  - fix for #164227 (buffer overflow)
  - fix for #164230 (missing debug info)


author: Miroslav Lichvar <mlichvar@redhat.com> - 14:3.9.4-9
changelog:
  - fix processing of Prism and AVS headers (#206686)
  - fix arp2ethers script
  - update ethercodes.dat
  - move pcap man page to devel package


author: Miroslav Lichvar <mlichvar@redhat.com> - 14:3.9.7-1
changelog:
  - update to 3.9.7
  - with -C option, drop root privileges before opening first savefile (#244860)
  - update tcpslice to 1.2a3
  - include time patch from Debian to fix tcpslice on 64-bit architectures


author: Miroslav Lichvar <mlichvar@redhat.com> - 14:3.9.8-5
changelog:
  - update config.{guess,sub} when building tcpslice
  - remove -D_GNU_SOURCE from CFLAGS
  - disable libsmi check in configure


author: Miroslav Lichvar <mlichvar@redhat.com> - 14:4.0.0-1.20090818git832d2c
changelog:
  - update to post 4.0.0 git snapshot 20090818git832d2c
  - print retrans and reachable times in ICMPv6 as milliseconds (#474264)


author: Michal Sekletar <msekleta@redhat.com> - 14:4.1.1-3
changelog:
  - Fix manpage (#663739)
  - Fix improper handling of bad date format in tcpslice (#684005)
  - Spec file clean up


author: Michal Sekletar <msekleta@redhat.com> - 14:4.2.0-1
changelog:
  - updated to 4.2.0
  - added new source file ppi.h, missing in upstream tarball
  - disabled make check because of missing .pcap files in testsuite
  - dropped unnecessary patches


author: Michal Sekletar <msekleta@redhat.com> - 14:4.6.2-2
changelog:
  - fix for CVE-2014-8767 (#1165160)
  - fix for CVE-2014-8768 (#1165161)
  - fix for CVE-2014-8769 (#1165162)


author: Michal Sekletar <msekleta@redhat.com> - 14:4.7.3-1
changelog:
  - rebase to 4.7.3 (#1201573)
  - contains fixes for CVE-2015-0261 CVE-2015-2154 CVE-2015-2153 CVE-2015-2155 (#1201799,#1201792,#1201795,#1201797)


author: Michal Ruprich <mruprich@redhat.com> - 14:4.9.2-4
changelog:
  - Removing build-time dependency on sharutils(rhbz#1587877)
  - Changing git dependency to smaller git-core


author: Michal Ruprich <mruprich@redhat.com> - 14:4.9.2-6
changelog:
  - Resolves: #1715423 - tcpdump pre creates user and groups unconditionally
  - Resolves: #1655622 - CVE-2018-19519 Stack-based buffer over-read in print-hncp.c:print_prefix() via crafted pcap


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 6.20.00-5
changelog:
  - Added multiple upstream patches:
      tcsh-6.20.00-004-do-not-use-old-pointer-tricks.patch
      tcsh-6.20.00-005-reset-fixes-numbering.patch
      tcsh-6.20.00-006-cleanup-in-readme-files.patch
      tcsh-6.20.00-007-look-for-tgetent-in-libtinfo.patch
      tcsh-6.20.00-008-guard-ascii-only-reversion.patch
      tcsh-6.20.00-009-fix-regexp-for-backlash-quoting-tests.patch (bug #1424082)


author: Michal Ruprich <mruprich@redhat.com> - 1:0.17-69
changelog:
  - Resolves: #1445259 - telnet won't build with latest gcc
  - added note about address resolution in manpage


author: Michal Ruprich <mruprich@redhat.com> - 1:0.17-73
changelog:
  - Resolves: #1602711 - Please review important issues found by covscan
  - Resolves: #1637085 - Option -i is missing in telnet in el8 but is available in el7


author: Parag Nemade <pnemade AT redhat DOT com> - 0.1-20
changelog:
  - Resolves:rh#921852 - Four culmus subpackages are not listed in build require
  - Added BR: and R: for the following packages
  - culmus-hadasim-clm-fonts, culmus-simple-clm-fonts
  - culmus-stamashkenaz-clm-fonts, culmus-stamsefarad-clm-fonts


author: Than Ngo <than@redhat.com> - 7:20180414-12
changelog:
  - texconfig is needed in texconfig-sys, added Requirement texlive-texconfig
  - multilib issue detected by rpmdiff
  - drop obsoleted patch for poppler-0.58
  - XML validity issue
    Related: #1602712


author: Parag Nemade <pnemade AT redhat DOT com> - 0.5.0-9
changelog:
  - Add metainfo file to show this font in gnome-software
  - Remove group tag
  - Replace %define with %global


author: David Hill <djh[at]ii.net>
changelog:
  - update to latest CVS (0.4a)
  - update Enigmail to 0.82.2
  - alter mozconfig for new build requirements
  - add missing BuildReq (#987)


author: Warren Togami <warren@togami.com> 0:0.4-0.fdr.3
changelog:
  - open-browser.sh release 3
  - patch broken /usr/bin/mozilla script during install
  - dir ownership
  - XXX: Source fails build on x86_64... fix later


author: David Hill <djh[at]ii.net> 0:0.5-0.fdr.1
changelog:
  - update Enigmail to 0.83.3
  - use official source tarball (after removing the CRLFs)
  - package renamed to thunderbird


author: David Hill <djh[at]ii.net> 0:0.5-0.fdr.4
changelog:
  - add Mozilla x86_64 patch (Oliver Sontag)
  - Enigmail source filenames now include the version
  - modify BuildRoot


author: David Hill <djh[at]ii.net> 0:0.5-0.fdr.6
changelog:
  - update open-browser script, modify BuildRequires (Warren)
  - add Blizzard's x-remote patch
  - initial attempt at x-remote-enabled startup script


author: David Hill <djh[at]ii.net> 0:0.5-0.fdr.8
changelog:
  - minor improvements to open-browser.sh and startup script
  - update to latest version of Blizzard's x-remote patch


author: David Hill <djh[at]ii.net> 0.6-0.fdr.0.20040415
changelog:
  - update to latest CVS, update mozconfig and %build accordingly
  - update to Enigmail 0.83.6
  - remove x-remote and x86_64 patches
  - build with -Os


author: David Hill <djh[at]ii.net> 0.6-0.fdr.3
changelog:
  - installation directory now versioned
  - allow root to run the program (for installing extensions)
  - remove unnecessary %pre and %post
  - remove separators, update mozconfig and launch script (M. Schwendt, #1460)


author: David Hill <djh[at]ii.net> 0.7-0.fdr.0
changelog:
  - update to 0.7
  - temporarily disable Enigmail 0.84.1, make ftp links work (#1634)
  - specify libdir, change BR for apt (V. Skyttä, #1617)


author: David Hill <djh[at]ii.net> 0.7-0.fdr.1
changelog:
  - re-enable Enigmail 0.84.1
  - add gcc-3.4 patch (Kaj Niemi)
  - use official branding (with permission)


author: David Hill <djh[at]ii.net> 0.7.2-0.fdr.0
changelog:
  - update to 0.7.2, just because it's there
  - update gcc-3.4 patch (Kaj Niemi)
  - add EM registration patch and remove instdir hack


author: David Hill <djh[at]ii.net> 0.7.3-0.fdr.1
changelog:
  - update to Thunderbird 0.7.3 and Enigmail 0.85.0
  - remove XUL.mfasl on startup, add Debian enigmail patches
  - add Xvfb hack for -install-global-extension


author: Warren Togami <wtogami@redhat.com> 0.7.3-3
changelog:
  - rawhide import
  - apply NetBSD's freetype 2.1.8 patch
  - apply psfonts patch
  - remove BR on /usr/bin/ex, breaks beehive


author: Christopher Aillon <caillon@redhat.com> 0.8.0-1
changelog:
  - Update to 0.8.0
  - Remove enigmail
  - Update BuildRequires
  - Remove gcc34 and extension manager patches -- they are upstreamed.
  - Fix for gnome-vfs2 error at component registration


author: Christopher Blizzard <blizzard@redhat.com> 0.8.0-8
changelog:
  - Pull over patches from firefox build:
    - disable default application dialog
    - don't include software update since it doesn't work
    - make external app support work


author: Christopher Aillon <caillon@redhat.com> 1.0.2-3
changelog:
  - Don't have downloads "disappear" when downloading to desktop (#139015)
  - Fix for some more cursor issues in textareas (149991, 150002, 152089)
  - Add upstream patch to fix bidi justification of pango
  - Add patch to fix launching of helper applications
  - Add patch to properly link against libgfxshared_s.a
  - Fix multilib conflicts


author: Kristian Høgsberg <krh@redhat.com> 1.0.2-7
changelog:
  - Add firefox-1.0-pango-cairo.patch to get rid of the last few Xft
    references, fixing the "no fonts" problem.


author: Christopher Aillon <caillon@redhat.com> - 1.5-0.5.3.rc1
changelog:
  - Once again, disable ppc64 because of a new issue.
    See https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=175944

  - Use the system NSS libraries
  - Build on ppc64


author: Christopher Aillon <caillon@redhat.com> - 1.5-0.5.6.rc1
changelog:
  - Fix crash when deleting highlighted text while composing mail within
    plaintext editor with spellcheck enabled.


author: Christopher Aillon <caillon@redhat.com> - 1.5.0.5-5
changelog:
  - Update nopangoxft.patch
  - Fix rendering of MathML thanks to Behdad Esfahbod.
  - Update start page text to reflect the MathML fixes.
  - Enable pango by default on all locales
  - Build using -rpath
  - Re-enable GCC visibility


author: Christopher Aillon <caillon@redhat.com> - 1.5.0.7-2
changelog:
  - Fix crash when changing gtk key theme
  - Prevent UI freezes while changing GNOME theme
  - Remove verbiage about pango; no longer required by upstream.


author: Christopher Aillon <caillon@redhat.com> 1.5.0.8-1
changelog:
  - Update to 1.5.0.8
  - Allow choosing of download directory
  - Take the user to the correct directory from the Download Manager.
  - Patch to add support for printing via pango from Behdad.


author: Christopher Aillon <caillon@redhat.com> 1.5.0.9-7
changelog:
  - Updated cursor position patch from tagoh to fix issue with "jumping"
    cursor when in a textfield with tabs.


author: Christopher Aillon <caillon@redhat.com> 2.0.0.0-0.5.rc1
changelog:
  - Fix the desktop file
  - Clean up the files list
  - Remove the default client stuff from the pref window


author: Christopher Aillon <caillon@redhat.com> 2.0.0.6-4
changelog:
  - Fix crashes when using GTK+ themes containing a gtkrc which specify
    GtkOptionMenu::indicator_size and GtkOptionMenu::indicator_spacing


author: Jan Horak <jhorak@redhat.com> - 3.0-2.beta2
changelog:
  - Fixed clicked link does not open in browser (#489120)
  - Fixed missing help in thunderbird (#488885)


author: Remi Collet <fedora@famillecollet.com> - 3.1.6-8
changelog:
  - fix cairo + nspr required version
  - lightning: fix thunderbird version required
  - lightning: fix release (b3pre)
  - lightning: clean install


author: Christopher Aillon <caillon@redhat.com> - 3.1.9-7
changelog:
  - Make gvfs-open launch a compose window (salimma)
  - Spec file cleanups (salimma, caillon)
  - Split out mozilla crashreporter symbols to its own debuginfo package (caillon)


author: Jan Horak <jhorak@redhat.com> - 8.0-2
changelog:
  - Enable Mozilla's crash reporter again for all archs
  - Temporary workaround for langpacks
  - Disabled addon check UI (#753551)


author: Martin Stransky <stransky@redhat.com> - 14.0-4
changelog:
  - Removed StartupWMClass (rhbz#844863)
  - Fixed -g parameter
  - Removed thunderbird-devel before packing to avoid debugsymbols duplicities (rhbz#823940)


author: Martin Stransky <stransky@redhat.com> - 24.2.0-4
changelog:
  - Fixed rhbz#1024232 - thunderbird: squiggly lines used
    for spelling correction disappear randomly


author: Martin Stransky <stransky@redhat.com> - 60.7.2-3
changelog:
  - Rebuild to fix rhbz#1725919 - Thunderbird fails to authenticate
    with gmail with ssl/tls and OAuth2.


author: Jan Grulich <jgrulich@redhat.com> - 1.9.0-7
changelog:
  - Improve coverity scan fixes
    Resolves: bz#1602714

    Inform whether view-only password is used or not
    Resolves: bz#1639169

    Backport fixes from RHEL 7
    Resolves: bz#1651254


author: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 4-1
changelog:
  - Release v4. Added features and implemented fixes follow. See README.md and
    manpages for documentation of new features.
  - Extract user session recording functionality from tlog-rec into a new tool:
    tlog-rec-session. It should be used as the user's login shell now, and
    tlog-rec should be used as a general recording and testing tool.
  - Add (optional) support for writing to and reading from Systemd Journal - the
    "journal" reader and writer.
  - Make tlog-rec default to "file" writer, and tlog-rec-session to "journal",
    if built with Journal support, and to "syslog" otherwise.
  - Add "-o" option to tlog-rec as an alias to "--file-path".
  - Add "-i" option to tlog-play as an alias to "--file-path".
  - Assume locale charset is UTF-8, if ASCII charset is detected, since that is
    a likely indication the locale settings were lost. E.g. upon console login
    or "su -" on Fedora and RHEL.
  - Switch the "ver" JSON field type to string. Now it should be two numbers
    separated by a dot. The increase of the first number indicates
    forward-incompatible changes, the increase of the second number -
    forward-compatible. If the dot and the second number are omitted, the second
    number is considered to be zero. Bump the format version to "2".
  - Add a new JSON field: "rec", containing an opaque host-unique recording ID.
    Bump the format version to "2.1".
  - Add support for playback controls, both through the command line and via
    playback-time control keys, including: speed adjustment, pause/resume,
    fast-forward to a time, and packet-by-packet stepping through the recording.
  - Add optional rate-limiting of logged messages. Both throttling and dropping
    messages are supported.
  - Add "--lax" option to tlog-play to allow playing back recordings with
    missing messages.
  - Fix input being ignored when there is a lot of output, while recording.
  - Remove addition of tlog-rec (tlog-rec-session) to /etc/shells from RPM
    packaging to prevent users from changing their shells themselves once it has
    been assigned.
  - Add support for specifying the shell to start via the tlog-rec-session
    executable name. E.g. by making a tlog-rec-session-shell-zsh ->
    tlog-rec-session symlink and executing it. That can be used to specify
    particular shells to be recorded for specific users by assigning these
    symlinks as their login shells.
  - Make error messages from all the tools a bit less noisy and more readable.


author: Kirill Glebov <kgliebov@redhat.com> - 5-1
changelog:
  - Release v5. Added features and implemented fixes follow. See README.md and
    manpages for documentation of new features.
  - Implement support for --configuration option for all programs.
    The option makes the program output its configuration in JSON and then
    exit.
  - Add BuildDependencies to allow yum-builddep.
  - Open JSON writer file with euid/egid. To allow creating protected log files
    with tlog-rec-session, open the JSON writer's file with the EUID and
    GUID the program was started with.
  - Installing Packages with the APT Addon instead of apt-get.
  - Switch to using TLOG_ERRS_RAISE macros.
  - Fix tlog-play cleanup-path segfault.
  - Modify command-line option parsing.
  - Remove "fields" field from ES query URL to fix compatibility with
    Elasticsearch 5.
  - Remove unused _source parameter from ES query URL.
  - Fix tlog-rec-session file permissions bug.
  - Use CLOCK_MONOTONIC for rate-limiting writing.
  - Filter out some more input control sequences.


author: Justin Stephenson <jstephen@redhat.com> - 6-1
changelog:
  - Release v6. Added features and implemented fixes follow. See README.md and
    manpages for documentation of new features.
  - Add integration tests for end-to-end test coverage.
  - Fix compiler type comparison error with json-c json_object_array_length
    return value.
  - Fix a distribution issue causing incorrect M4_CONF_PATH expansion.
  - Log more detailed error when systemd journal is not present.


author: Justin Stephenson <jstephen@redhat.com> - 7-1
changelog:
  - Release v7
  - Allow tlog-play redirection of stdout
  - Add -i/--interactive option to tlog-rec-session. Allows login
    programs to call tlog-rec-session more transparently.
  - Make in_txt/out_txt fields optional. This handles missing fields
    when reading from Elasticsearch or other backends.


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 2:2.14.1-36
changelog:
  - Move SSL certificates to more convenient place, update related scripts
    and README.RedHat.SSL
    Related: #1308809


author: David Brown <david.brown@pnnl.gov> - 4.2.10-9
changelog:
  - Resolve dependencies for rawhide (#1308192)
  - Fix port and args environment variables for el5/6 (#1254301)


author: Jan Vcelak <jvcelak@redhat.com> 2.1.0-1
changelog:
  - new release:
    - daemon: allow running without selected profile
    - daemon: fix profile merging, allow only safe characters in profile names
    - daemon: implement missing methods in DBus interface
    - daemon: implement profile recommendation
    - daemon: improve daemonization, PID file handling
    - daemon: improved device matching in profiles, negation possible
    - daemon: various internal improvements
    - executables: check for EUID instead of UID
    - executables: run python with -Es to increase security
    - plugins: cpu - fix cpupower execution
    - plugins: disk - fix option setting
    - plugins: mounts - new, currently supports only barriers control
    - plugins: sysctl - fix a bug preventing settings application
    - powertop2tuned: speedup, fix crashes with non-C locales
    - powertop2tuned: support for powertop 2.2 output
    - profiles: progress on replacing scripts with plugins
    - tuned-adm: bash completion - suggest profiles from all supported locations
    - tuned-adm: complete switch to D-bus
    - tuned-adm: full control to users with physical access


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.1.2-1
changelog:
  - new release:
    - systemtap {disk,net}devstat: fix typo in usage
    - switched to configobj parser
    - latency-performance: disabled THP
    - fixed fd leaks on subprocesses


author: Jan Vcelak <jvcelak@redhat.com> 2.2.0-1
changelog:
  - new release:
    - remove nobarrier from virtual-guest (data loss prevention)
    - devices enumeration via udev, instead of manual retrieval
    - support for dynamically inserted devices (currently disk plugin)
    - dropped rfkill plugins (bluetooth and wifi), the code didn't work


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.2.1-1
changelog:
  - new release:
    - audio plugin: fixed error handling in _get_timeout
    - removed cpupower dependency, added sysfs fallback
    - powertop2tuned: fixed parser crash on binary garbage
      resolves: rhbz#914933
    - cpu plugin: dropped multicore_powersave as kernel upstream already did
    - plugins: options manipulated by dynamic tuning are now correctly saved and restored
    - powertop2tuned: added alias -e for --enable option
    - powertop2tuned: new option -m, --merge-profile to select profile to merge
    - prefer transparent_hugepage over redhat_transparent_hugepage
    - recommend: use recommend.conf not autodetect.conf
    - tuned.service: switched to dbus type service
      resolves: rhbz#911445
    - tuned: new option --pid, -P to write PID file
    - tuned, tuned-adm: added new option --version, -v to show version
    - disk plugin: use APM value 254 for cleanup / APM disable instead of 255
      resolves: rhbz#905195
    - tuned: new option --log, -l to select log file
    - powertop2tuned: avoid circular deps in include (one level check only)
    - powertop2tuned: do not crash if powertop is not installed
    - net plugin: added support for wake_on_lan static tuning
      resolves: rhbz#885504
    - loader: fixed error handling
    - spec: used systemd-rpm macros
      resolves: rhbz#850347


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.2.2-1
changelog:
  - new-release:
    - cpu plugin: fixed cpupower workaround
    - cpu plugin: fixed crash if cpupower is installed


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.3.0-1
changelog:
  - new-release
    resolves: rhbz#1020743
    - audio plugin: fixed audio settings in standard profiles
      resolves: rhbz#1019805
    - video plugin: fixed tunings
    - daemon: fixed crash if preset profile is not available
      resolves: rhbz#953128
    - man: various updates and corrections
    - functions: fixed usb and bluetooth handling
    - tuned: switched to lightweighted pygobject3-base
    - daemon: added global config for dynamic_tuning
      resolves: rhbz#1006427
    - utils: added pmqos-static script for debug purposes
      resolves: rhbz#1015676
    - throughput-performance: various fixes
      resolves: rhbz#987570
    - tuned: added global option update_interval
    - plugin_cpu: added support for x86_energy_perf_policy
      resolves: rhbz#1015675
    - dbus: fixed KeyboardInterrupt handling
    - plugin_cpu: added support for intel_pstate
      resolves: rhbz#996722
    - profiles: various fixes
      resolves: rhbz#922068
    - profiles: added desktop profile
      resolves: rhbz#996723
    - tuned-adm: implemented non DBus fallback control
    - profiles: added sap profile
    - tuned: lowered CPU usage due to python bug
      resolves: rhbz#917587


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.3.0-2
changelog:
  - fixed race condition in the start/stop code
    resolves: rhbz#1028119
  - improved tuned responsiveness
    resolves: rhbz#1028122


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.4.0-1
changelog:
  - new-release
    resolves: rhbz#1093883
    - fixed traceback if profile cannot be loaded
      related: rhbz#953128
    - powertop2tuned: fixed traceback if rewriting file instead of dir
      resolves: rhbz#963441
    - throughput-performance: altered dirty ratios for better performance
      resolves: rhbz#1043533
    - latency-performance: leaving THP on its default
      resolves: rhbz#1064510
    - used throughput-performance profile on server by default
      resolves: rhbz#1063481
    - network-latency: added new profile
      resolves: rhbz#1052418
    - network-throughput: added new profile
      resolves: rhbz#1052421
    - recommend.conf: fixed config file
      resolves: rhbz#1069123
    - systemd: added cpupower.service conflict
      resolves: rhbz#1073392
    - balanced: used medium_power ALPM policy
    - added support for >, < assignment modifiers in tuned.conf
    - handled root block devices
    - balanced: used conservative CPU governor
      resolves: rhbz#1124125
    - plugins: added selinux plugin
    - plugin_net: added nf_conntrack_hashsize parameter
    - profiles: added atomic-host profile
      resolves: rhbz#1091977
    - profiles: added atomic-guest profile
      resolves: rhbz#1091979
    - moved profile autodetection from post install script to tuned daemon
      resolves: rhbz#1144067
    - profiles: included sap-hana and sap-hana-vmware profiles
    - man: structured profiles manual pages according to sub-packages
    - added missing hdparm dependency
      resolves: rhbz#1144858
    - improved error handling of switch_profile
      resolves: rhbz#1068699
    - tuned-adm: active: detect whether tuned deamon is running
      related: rhbz#1068699
    - removed active_profile from RPM verification
      resolves: rhbz#1104126
    - plugin_disk: readahead value can be now specified in sectors
      resolves: rhbz#1127127
    - plugins: added bootloader plugin
      resolves: rhbz#1044111
    - plugin_disk: added error counter to hdparm calls
    - plugins: added scheduler plugin
      resolves: rhbz#1100826
    - added tuned-gui


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.4.1-1
changelog:
  - new-release
    - fixed return code of tuned grub template
      resolves: rhbz#1151768
    - plugin_bootloader: fix for multiple parameters on command line
      related: rhbz#1148711
    - tuned-adm: fixed traceback on "tuned-adm list"
      resolves: rhbz#1149162
    - plugin_bootloader is automatically disabled if grub2 is not found
      resolves: rhbz#1150047
    - plugin_disk: set_spindown and set_APM made independent
      resolves: rhbz#976725


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.5.0-1
changelog:
  - new-release
    resolves: rhbz#1155052
    - add support for ethtool -C to tuned network plugin
      resolves: rhbz#1152539
    - add support for ethtool -K to tuned network plugin
      resolves: rhbz#1152541
    - add support for calculation of values for the kernel command line
      resolves: rhbz#1191595
    - no error output if there is no hdparm installed
      resolves: rhbz#1191775
    - do not run hdparm on hotplug events if there is no hdparm tuning
      resolves: rhbz#1193682
    - add oracle tuned profile
      resolves: rhbz#1196298
    - fix bash completions for tuned-adm
      resolves: rhbz#1207668
    - add glob support to tuned sysfs plugin
      resolves: rhbz#1212831
    - add tuned-adm verify subcommand
      resolves: rhbz#1212836
    - do not install tuned kernel command line to rescue kernels
      resolves: rhbz#1223864
    - add variables support
      resolves: rhbz#1225124
    - add built-in support for unit conversion into tuned
      resolves: rhbz#1225135
    - fix vm.max_map_count setting in sap-netweaver profile
      resolves: rhbz#1228562
    - add tuned profile for RHEL-RT
      resolves: rhbz#1228801
    - plugin_scheduler: added support for runtime tuning of processes
      resolves: rhbz#1148546
    - add support for changing elevators on xvd* devices (Amazon EC2)
      resolves: rhbz#1170152
    - add workaround to be run after systemd-sysctl
      resolves: rhbz#1189263
    - do not change settings of transparent hugepages if set in kernel cmdline
      resolves: rhbz#1189868
    - add tuned profiles for RHEL-NFV
      resolves: rhbz#1228803
    - plugin_bootloader: apply $tuned_params to existing kernels
      resolves: rhbz#1233004


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.5.1-1
changelog:
  - new-release
    related: rhbz#1155052
    - plugin_scheduler: work with nohz_full
      resolves: rhbz#1247184
    - fixed realtime-virtual-guest/host profiles packaged twice
      resolves: rhbz#1249028
    - fixed requirements of realtime and nfv profiles
    - fixed tuned-gui not starting
    - various other minor fixes


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.6.0-1
changelog:
  - new-release
    - plugin_cpu: do not show error if cpupower or x86_energy_perf_policy are missing
    - plugin_sysctl: fixed quoting of sysctl values
      resolves: rhbz#1254538
    - tuned-adm: added log file location hint to verify command output
    - libexec: fixed listdir and isdir in defirqaffinity.py
      resolves: rhbz#1252160
    - plugin_cpu: save and restore only intel pstate attributes that were changed
      resolves: rhbz#1252156
    - functions: fixed sysfs save to work with options
      resolves: rhbz#1251507
    - plugins: added scsi_host plugin
    - tuned-adm: fixed restart attempt if tuned is not running
    - spec: fixed post scriptlet to work without grub
      resolves: rhbz#1265654
    - tuned-profiles-nfv: fix find-lapictscdeadline-optimal.sh for CPUS where ns > 6500
      resolves: rhbz#1267284
    - functions: fixed restore_logs_syncing to preserve SELinux context on rsyslog.conf
      resolves: rhbz#1268901
    - realtime: set unboud workqueues cpumask
      resolves: rhbz#1259043
    - spec: correctly remove tuned footprint from /etc/default/grub
      resolves: rhbz#1268845
    - gui: fixed creation of new profile
      resolves: rhbz#1274609
    - profiles: removed nohz_full from the realtime profile
      resolves: rhbz#1274486
    - profiles: Added nohz_full and nohz=on to realtime guest/host profiles
      resolves: rhbz#1274445
    - profiles: fixed lapic_timer_adv_ns cache
      resolves: rhbz#1259452
    - plugin_sysctl: pass verification even if the option doesn't exist
      related: rhbz#1252153
    - added support for 'summary' and 'description' of profiles,
      extended D-Bus API for Cockpit
      related: rhbz#1228356


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.7.0-1
changelog:
  - new-release
    - gui: fixed save profile
      resolves: rhbz#1242491
    - tuned-adm: added --ignore-missing parameter
      resolves: rhbz#1243807
    - plugin_vm: added transparent_hugepage alias
      resolves: rhbz#1249610
    - plugins: added modules plugin
      resolves: rhbz#1249618
    - plugin_cpu: do not show error if cpupower or x86_energy_perf_policy are
      missing
      resolves: rhbz#1254417
    - tuned-adm: fixed restart attempt if tuned is not running
      resolves: rhbz#1258755
    - nfv: avoided race condition by using synchronous mode
      resolves: rhbz#1259039
    - realtime: added check for isolcpus sanity
      resolves: rhbz#1264128
    - pm_qos: fixed exception if PM_QoS is not available
      resolves: rhbz#1296137
    - plugin_sysctl: reapply system sysctl after Tuned sysctl are applied
      resolves: rhbz#1302953
    - atomic: increase number of inotify watches
      resolves: rhbz#1322001
    - realtime-virtual-host/guest: added rcu_nocbs kernel boot parameter
      resolves: rhbz#1334479
    - realtime: fixed kernel.sched_rt_runtime_us to be -1
      resolves: rhbz#1346715
    - tuned-adm: fixed detection of no_daemon mode
      resolves: rhbz#1351536
    - plugin_base: correctly strip assignment modifiers even if not used
      resolves: rhbz#1353142
    - plugin_disk: try to workaround embedded '/' in device names
      related: rhbz#1353142
    - sap-hana: explicitly setting kernel.numa_balancing = 0 for better performance
      resolves: rhbz#1355768
    - switched to polkit authorization
      resolves: rhbz#1095142
    - plugins: added scsi_host plugin
      resolves: rhbz#1246992
    - spec: fixed conditional support for grub2 to work with selinux
      resolves: rhbz#1351937
    - gui: added tuned icon and desktop file
      resolves: rhbz#1356369


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.7.0-2
changelog:
  - Fixed tuned-gui traceback (by tuned-gui-traceback-fix patch)
    Resolves: rhbz#1358846
  - Fixed 'tuned-adm list' traceback if daemon is not running
    (by tuned-adm-list-no-dbus-traceback-fix patch)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.7.1-1
changelog:
  - New release
    Resolves: rhbz#1362481
  - Dropped tuned-gui-traceback-fix and tuned-adm-list-no-dbus-traceback-fix
    patches (both upstreamed)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.7.1-3
changelog:
  - Fixed traceback when non-existent profile is queried through
    tuned-adm profile_info
    Resolves: rhbz#1385145


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.8.0-1
changelog:
  - new release
    - rebase tuned to latest upstream
      resolves: rhbz#1388454
    - cpu-partitioning: enabled timer migration
      resolves: rhbz#1408308
    - cpu-partitioning: disabled kvmclock sync and ple
      resolves: rhbz#1395855
    - spec: muted error if there is no selinux support
      resolves: rhbz#1404214
    - units: implemented instance priority
      resolves: rhbz#1246172
    - bootloader: added support for initrd overlays
      resolves: rhbz#1414098
    - cpu-partitioning: set CPUAffinity early in initrd image
      resolves: rhbz#1394965
    - cpu-partitioning: set workqueue affinity early
      resolves: rhbz#1395899
    - scsi_host: fixed probing of ALPM, missing ALPM logged as info
      resolves: rhbz#1416712
    - added new profile cpu-partitioning
      resolves: rhbz#1359956
    - bootloader: improved inheritance
      resolves: rhbz#1274464
    - units: mplemented udev-based regexp device matching
      resolves: rhbz#1251240
    - units: introduced pre_script, post_script
      resolves: rhbz#1246176
    - realtime-virtual-host: accommodate new ktimersoftd thread
      resolves: rhbz#1332563
    - defirqaffinity: fixed traceback due to syntax error
      resolves: rhbz#1369791
    - variables: support inheritance of variables
      resolves: rhbz#1433496
    - scheduler: added support for cores isolation
      resolves: rhbz#1403309
    - tuned-profiles-nfv splitted to host/guest and dropped unneeded dependency
      resolves: rhbz#1413111
    - desktop: fixed typo in profile summary
      resolves: rhbz#1421238
    - with systemd don't do full rollback on shutdown / reboot
      resolves: rhbz#1421286
    - builtin functions: added virt_check function and support to include
      resolves: rhbz#1426654
    - cpulist_present: explicitly sorted present CPUs
      resolves: rhbz#1432240
    - plugin_scheduler: fixed initialization
      resolves: rhbz#1433496
    - log errors when applying a profile fails
      resolves: rhbz#1434360
    - systemd: added support for older systemd CPUAffinity syntax
      resolves: rhbz#1441791
    - scheduler: added workarounds for low level exceptions from
      python-linux-procfs
      resolves: rhbz#1441792
    - bootloader: workaround for adding tuned_initrd to new kernels on restart
      resolves: rhbz#1441797


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.8.0-6
changelog:
  - Dropped qemu-kvm-tools-rhev requirement, now satisfied by
    tuned-profiles-nfv-host-bin
    Related: rhbz#1504681


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.10.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: rhbz#1546598
    - script: show stderr output in the log
    - realtime-virtual-host: script.sh: add error checking
    - man: improved tuned-profiles-cpu-partitioning.7
    - bootloader: check if grub2_cfg_file_name is None in _remove_grub2_tuning()
    - plugin_scheduler: whitelist/blacklist processed also for thread names
    - bootloader: patch all GRUB2 config files
    - profiles: added mssql profile
    - tuned-adm: print log excerpt when changing profile
    - cpu-partitioning: use no_balance_cores instead of no_rebalance_cores
    - sysctl: support assignment modifiers as other plugins do
    - oracle: fixed ip_local_port_range parity warning
      resolves: rhbz#1527219
    - Fix verifying cpumask on systems with more than 32 cores
      resolves: rhbz#1528368
    - oracle: updated the profile to be in sync with KCS 39188
      resolves: rhbz#1447323


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.10.0-1
changelog:
  - new release
    - rebased tuned to latest upstream
      related: rhbz#1546598
    - IRQ affinity handled by scheduler plugin
      resolves: rhbz#1590937


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.10.0-9
changelog:
  - realtime-virtual-guest/host: start/stop rt-entsk daemon on
    initialization/shutdown
    resolves: rhbz#1619822


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.12.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: rhbz#1685585
    - sap-netweaver: changed values of kernel.shmall and kernel.shmmax to RHEL-8 defaults
      resolves: rhbz#1708418
    - sap-netweaver: changed value of kernel.sem to RHEL-8 default
      resolves: rhbz#1701394
    - sap-hana-vmware: dropped profile
      resolves: rhbz#1715541
    - s2kb function: fixed to be compatible with python3
      resolves: rhbz#1684122
    - do fallback to the powersave governor (balanced and powersave profiles)
      resolves: rhbz#1679205
    - added support for negation of CPU list
      resolves: rhbz#1676588
    - switched from sysctl tool to own implementation
      resolves: rhbz#1666678
    - realtime-virtual-host: added tsc-deadline=on to qemu cmdline
      resolves: rhbz#1554458
    - fixed handling of devices that have been removed and re-attached
      resolves: rhbz#1677730


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.13.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: rhbz#1738250
    - cpu: fixed checking if EPB is supported
      resolves: rhbz#1690929
    - scheduler: fixed IRQ SMP affinity verification to respect ignore_missing
      resolves: rhbz#1729936
    - realtime: enabled ktimer_lockless_check
      resolves: rhbz#1734096
    - plugins: support cpuinfo_regex and uname_regex matching
      resolves: rhbz#1748965
    - sysctl: made reapply_sysctl ignore configs from /usr
      resolves: rhbz#1759597
    - added support for multiple include directives
      resolves: rhbz#1760390
    - realtime: added nowatchdog kernel command line option
      resolves: rhbz#1767614


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.13.0-1
changelog:
  - new release
    - rebased tuned to latest upstream
      related: rhbz#1738250
    - sap-hana: updated tuning
      resolves: rhbz#1779821
    - latency-performance: updated tuning
      resolves: rhbz#1779759


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.13.0-6.1
changelog:
  - realtime-virtual-host: remove lapic advancement calculation and
    related qemu-kvm-tools-rhev requirement
    Resolves: rhbz#1884545


author: Jakub Jelinek <jakub@redhat.com> 2005g-2
changelog:
  - 2005g
    - fixes for Uruguay
  - include README and Theory from tzcode tarball in %{_docdir};
    Theory includes a good summary of how the timezone data files
    are supposed to be named


author: Jakub Jelinek <jakub@redhat.com> 2005m-2
changelog:
  - 2005m
    - changes for USA (extending DST by 4 weeks since 2007), Tunisia,
      Australia, Kazakhstan
    - historical timezone data changes for Japan, Poland, Northern Ireland and
      Mali
    - timezone name change for East Timor


author: Jakub Jelinek <jakub@redhat.com> 2005n-2
changelog:
  - 2005n
    - changes for Kyrgyzstan and Uruguay
  - fix a typo in the Makefile (used TZDATA env var instead of TZDIR during
    make check), update tst-timezone.c from glibc CVS (#172102)


author: Jakub Jelinek <jakub@redhat.com> 2005q-2
changelog:
  - 2005q
    - changes for Georgia, Azerbaijan, Jordan, Palestine, Cuba, Nicaragua
    - SystemV timezone changes


author: Petr Machata <pmachata@redhat.com> 2005r-2
changelog:
  - 2005r
    - Zones EST, MST, HST, EST5EDT, CST6CDT, MST7MDT, PST8PDT moved to
      northamerica to guard against old files with obsolete information
      being left in the time zone binary directory.
    - Changes for countries that are supposed to join 2007 US DST
      change.  This includes most of Canada, however entries already in
      the database (Alberta, British Columbia, Newfoundland, Northwest
      Territories, and Yukon) were left alone for the time being.
    - Fixes in zdump.c (abbrok): conditions are chained, and the string
      is checked for emptiness.


author: Petr Machata <pmachata@redhat.com> 2005r-3
changelog:
  - 2005r-3
    - Meta changes.  Renaming tzdata.tar.bz2 file to tzdata$ver-base,
      so that it won't clash across updates.


author: Petr Machata <pmachata@redhat.com> 2006a-1
changelog:
  - Upstream 2006a:
    - private.h(scheck): changing char* to char const*
    - Rule changes for Palestine, zone changes for Indiana/US, both
      changes for Canada.
    - Many related doc changes.
  - Naming scheme in spec file doesn't use %{name}, but tzdata.


author: Petr Machata <pmachata@redhat.com> 2006b-1
changelog:
  - Upstream 2006b:
    - using tz64code version, as 32 is legacy according to tzdata ML
    - new manual pages for ctime, strftime, tzset
    - some source code reorganizations
    - no timezone/dst rule updates


author: Petr Machata <pmachata@redhat.com> - 2006c-1
changelog:
  - Upstream 2006c
    - Time-related changes:
      - dozens of historical and commentary changes
      - Iran stopped observing DST
      - Sri Lanka switches from UTC+6 to UTC+5:30
      - America/Thule and America/Edmonton will adopt new US rules,
        starting 2007
      - Tunisia is adopting regular DST
    - Code:
      - asctime.c: Chages in format strings to silent gcc warnings
      - removing K&R notation from function signatures
      - few fixes across the code


author: Petr Machata <pmachata@redhat.com> - 2006d-1
changelog:
  - Upstream 2006d
    - Haiti observes DST
    - Sri Lanka change actually took effect Apr/15
    - All Canada is now scheduled for 2007 US DST rules
    - Some historical fixes


author: Petr Machata <pmachata@redhat.com> - 2006f-1
changelog:
  - Upstream 2006f
    - America/Guatemala observes DST between Apr/30 and Oct/1
    - Historical changes for Nicaragua
    - Update of America/Indiana/Vincennes in zone table


author: Petr Machata <pmachata@redhat.com> - 2006j-1
changelog:
  - Upstream 2006j
    - Honduras stopped observing DST on Monday at 00:00
    - America/Bermuda will follow the US's lead next year
    - America/Moncton will use US-style rules next year
    - New Zone America/Blanc-Sablon, for Canadians who observe AST all
      year
    - New zone: America/Atikokan instead of America/Coral_Harbour
    - New zones: Europe/Jersey, Europe/Guernsey, Europe/Isle_of_Man
    - Historical changes
    - Commentary updates
  - Upstream 2006i
    - localtime.c fixes
  - Upstream 2006h
    - zic leapsecond fix


author: Petr Machata <pmachata@redhat.com> - 2006l-1
changelog:
  - Upstream 2006k, 2006l:
    - Adjustments for Egypt, Palestine, Cuba, Honduras
    - Documentation changes


author: Petr Machata <pmachata@redhat.com> - 2006m-1
changelog:
  - Upstream 2006m:
    - Adjustments for Egypt, Palestine, Uruguay
    - Better description of `until' field in zic (8) manpage


author: Petr Machata <pmachata@redhat.com> - 2006m-2
changelog:
  - Proposed upstream patch (#210058)
    - Jordan will switch to winter time on October 27, not September 29
    - Brazil's DST this year is the first Sunday in November to the last
      Sunday in February.  (Thanks to Frederico A. C. Neves.)
    - ISO 3166 codes for Serbia and Montenegro, zone Europe/Podgorica
    - Commentary and past timestamps changes


author: Petr Machata <pmachata@redhat.com> - 2006p-1
changelog:
  - Upstream 2006p
    - Official version of Western Australia DST trial changes
    - Latitude/longitude changes for Europe/Jersey and Europe/Podgorica


author: Petr Machata <pmachata@redhat.com> - 2007a-1
changelog:
  - Upstream 2007a
    - Updates to Bahamas, they will be in sync with 2007 US DST change
    - New zone Australia/Eucla
    - Africa/Asmera renamed to Africa/Asmara, link created
    - Atlantic/Faeroe renamed to Atlantic/Faroe, link created
  - Packaging
    - Adding BuildRequires: glibc-common >= 2.5.90-7 to build tzdata
      with extended 64-bit format necessary for dates beyond 2037


author: Petr Machata <pmachata@redhat.com> - 2007c-1
changelog:
  - Upstream 2007c
    - Pulaski County, Indiana, switched back to eastern time.
    - Turkey switches at 01:00 standard time, not at 01:00 UTC.
  - Upstream 2007b
    - Changes to the commentary in "leapseconds".


author: Petr Machata <pmachata@redhat.com> - 2007d-1
changelog:
  - Upstream 2007d
    - Mongolia has abolished DST.
    - Turkey will use EU rules this year, changing at 01:00 UTC rather
      than 01:00 standard time.
    - Cuba observed DST starting Sunday.
    - Resolute, Nunavut switched from Central to Eastern time last
      November.


author: Petr Machata <pmachata@redhat.com> - 2007e-1
changelog:
  - Upstream 2007e
    - Syria switched to summer time at Mar/29.
    - Honduras will not enter DST this year.


author: Petr Machata <pmachata@redhat.com> - 2007f-1
changelog:
  - Upstream 2007f
    - New Zealand is extending DST, starting later this year.
    - Haiti no longer observes DST.
    - The Turks and Caicos switch at 02:00, not at 00:00, and have
      adopted US DST rules.


author: Petr Machata <pmachata@redhat.com> - 2007g-1
changelog:
  - Fix licensing tag.
  - Upstream 2007g
    - Egypt switches the September 7, not September 28
    - Daviess, Dubous, Knox, Martin, and Pike Counties, Indiana, switch
      from central to eastern time in November
    - South Australia, Tasmania, Victoria, New South Wales and Lord Howe
      Island are changing their DST rules effective next year
    - Sync several Antarctic station's rules with the New Zealand
    - leapseconds contain changes from the most recent IERS bulletin


author: Petr Machata <pmachata@redhat.com> - 2007h-1
changelog:
  - Upstream 2007h
    - Brazil will observe DST from 2007-10-14 to 2008-02-17
    - Egypt and Gaza switched earlier than we expected
    - Iran will resume DST next year
    - Venezuela is scheduled to change TZ to -4:30 on January 1


author: Petr Machata <pmachata@redhat.com> - 2007i-1
changelog:
  - Upstream 2007i
    - Syria DST will take place at Midnight between Thursday and Friday.
    - Cuba will end DST on the last Sunday of October.
  - Update tst-timezone.c from glibc CVS


author: Petr Machata <pmachata@redhat.com> - 2007j-1
changelog:
  - Upstream 2007j
    - New links America/St_Barthelemy and America/Marigot
    - Venezuela is changing their clocks on December 9 at 03:00


author: Petr Machata <pmachata@redhat.com> - 2008b-1
changelog:
  - Upstream 2008b
    - DST changes for Syria, Cuba; Iraq abandons DST
    - Saigon zone renamed Ho_Chi_Minh; backward link provided
    - Add America/Argentina/San_Luis information


author: Petr Machata <pmachata@redhat.com> - 2008c-1
changelog:
  - Upstream 2008c
    - Mongolia changes zone
    - Pakistan DST is scheduled until Sep/1, instead of Aug/31
  - Drop Morocco and Pakistan patches that are superseded by upstream
  - Fix a typo in Java subpackage name


author: Petr Machata <pmachata@redhat.com> - 2008e-1
changelog:
  - Upstream 2008e
    - Changes for Mauritius
    - Leap second coverage for 31/Dec 2008
    - Corrections of historical dates


author: Petr Machata <pmachata@redhat.com> - 2008f-1
changelog:
  - Upstream 2008f
    - Changes for Mauritius (extends DST to years to come)
    - Palestine changes clocks for the duration of Ramadan
    - Argentina will start DST on Sunday October 19, 2008
    - Brazil will start DST on 2008-10-19
  - Drop Pakistan and Morocco patches


author: Petr Machata <pmachata@redhat.com> - 2008h-1
changelog:
  - Upstream 2008h
    - Fix exact DST transition hour for Mauritius
    - Syria will leave the period of DST on Nov 1
    - Fix coordinates of Pacific/Niue


author: Petr Machata <pmachata@redhat.com> - 2008i-1
changelog:
  - Upstream 2008i
    - Updates for Argentina: Drop DST in zones America/Argentina/Jujuy,
      La_Rioja, San_Juan, Catamarca, Mendoza, Rio_Gallegos, Ushuaia; new
      zone America/Argentina/Salta (for provinces SA, LP, NQ, RN).


author: Petr Machata <pmachata@redhat.com> - 2009a-1
changelog:
  - Upstream 2009a
    - Fix Asia/Kathmandu spelling
    - Historical timestamps for Switzerland and Cuba
    - DST update for America/Resolute


author: Petr Machata <pmachata@redhat.com> - 2009d-1
changelog:
  - Upstream 2009d
    - Morocco will observe DST from 2009-06-01 00:00 to 2009-08-21 00:00
    - Tunisia will not observe DST this year.
    - Syria will start DST on 2009-03-27 00:00 this year
    - Cuba will start DST on midnight between 2009-03-07 and 2009-03-08
    - Province of San Luis, Argentina, went to UTC-04:00 on 2009-03-15


author: Petr Machata <pmachata@redhat.com> - 2009e-1
changelog:
  - Upstream 2009e
    - Historical changes for Jordan
    - Palestine will start DST on 2009-03-26 and end 2009-09-27
  - Egypt ends DST on 2009-09-24


author: Petr Machata <pmachata@redhat.com> - 2009f-1
changelog:
  - Upstream 2009f
    - Pakistan will observe DST between 2009-04-15 and (probably) 2009-11-01
  - Drop Pakistan patch


author: Petr Machata <pmachata@redhat.com> - 2009h-2
changelog:
  - Upstream 2009h
    - Convert use of 00:00 stamps to 24:00 of the previous day
    - Clarify that the data is Public Domain
  - Drop Cairo patch


author: Petr Machata <pmachata@redhat.com> - 2009k-1
changelog:
  - Upstream 2009k
    - Mauritius will not continue to observe DST the coming summer
    - Arbitrarily end DST at the end of 2009 so that a POSIX-style time
      zone string can appear in the Dhaka binary file


author: Petr Machata <pmachata@redhat.com> - 2009m-1
changelog:
  - Upstream 2009m
    - Palestine will will revert back to winter time on Friday, 2009-09-04
    - Samoa passed the DST Bill that fixes DST dates for 2009 and 2010
  - Drop Egypt patch


author: Petr Machata <pmachata@redhat.com> - 2009m-2
changelog:
  - Add markers for autoupdate of spec file
  - Pakistan leaves the period of DST on October 1 (tzdata-2009m-karachi.patch)


author: Petr Machata <pmachata@redhat.com> - 2009o-1
changelog:
  - Upstream 2009o
    - Bangladesh won't go back to Standard Time from October 1, 2009
    - Pakistan leaves DST on October 1, 2009
  - Dropped tzdata-2009m-karachi.patch
  - Argentina does not enter DST on October 18 (tzdata-2009o-argentinas.patch)


author: Petr Machata <pmachata@redhat.com> - 2009u-1
changelog:
  - Upstream 2009p
    - Argentina does not enter DST on October 18
    - San Luis switched from UTC-4 to UTC-3 on October 11th
  - Upstream 2009q
    - Change DST end in Syria from November 1 to last Friday in October
    - Changes to past Hong Kong transitions
    - Kemerovo oblast' in Russia will change current time zone on March 28, 2010.
      Asia/Novokuznetsk is the new time zone name
  - Upstream 2009r
    - Changes to local times of three Australian research stations in Antarctica
  - Upstream 2009s
    - Fiji plans to re-introduce DST from November 29th 2009 to April 25th 2010
  - Upstream 2009u
    - Bangladesh changed their clock back to Standard Time on December 31, 2009
  - Dropped tzdata-2009o-argentinas.patch


author: Petr Machata <pmachata@redhat.com> - 2010c-1
changelog:
  - Upstream 2010a
    - Source code cleanups
    - Historical timestamps for Bangladesh
  - Upstream 2010b
    - Northern Mexico's border cities share the DST schedule with the
      United States
  - Upstream 2010c
    - Paraguay DST now in effect from 2nd Sunday of April to 1st Sunday
      of October


author: Petr Machata <pmachata@redhat.com> - 2010e-1
changelog:
  - Upstream 2010d
    - The DST change in Bangladesh takes place a minute earlier
    - Fiji to end DST on 2010-03-28 at 03:00, about a month earlier
    - Samoa to observe DST this year; they didn't observe DST last year
    - DST in Chile extended to 3 April
  - Upstream 2010e:
    - Fix a typo in Bangladesh DST rule


author: Petr Machata <pmachata@redhat.com> - 2010f-1
changelog:
  - Upstream 2010f:
    - Changes to Australian stations in Antarctica
    - Correct 2010 Samoa DST start date
    - New zone Antarctica/Macquarie
    - Change Syria DST start from last Friday in March to first Friday
      in April in 2010 and forward
  - Upstream 2010g proposal (tzdata-2010f-g.patch):
    - No Bangladesh DST in 2010 and forward.
    - Gaza DST starts last Saturday in March at 12:01 a.m. in 2010 and forward
    - Kamchatka and Anadyr change to Moscow+8 on 2010-03-28
    - Samara changes to Moscow+0 on 2010-03-28
    - Related zone.tab updates


author: Petr Machata <pmachata@redhat.com> - 2010f-3
changelog:
  - Tunisia not to observe DST in 2010 (tzdata-2010g-tunis.patch)
  - Pakistan not to observe DST in 2010 (tzdata-2010g-karachi.patch)


author: Petr Machata <pmachata@redhat.com> - 2010h-2
changelog:
  - Upstream 2010g:
    - No Bangladesh DST in 2010 and forward.
    - Gaza DST starts last Saturday in March at 12:01 a.m. in 2010 and forward
    - Kamchatka and Anadyr change to Moscow+8 on 2010-03-28
    - Samara changes to Moscow+0 on 2010-03-28
    - Related zone.tab updates
  - Upstream 2010h:
    - No DST in Tunisia in 2010 and forward
    - No DST in Pakistan in 2010 and forward
  - Dropped tzdata-2010g-tunis.patch
  - Dropped tzdata-2010f-g.patch
  - Dropped tzdata-2010g-karachi.patch


author: Petr Machata <pmachata@redhat.com> - 2010i-1
changelog:
  - Upstream 2010i:
    - Morocco will have DST from 2010-05-02 to 2010-08-08
    - San Luis, Argentina will keep permanent DST after April 11, 2010
    - Updates of historical stamps for Taiwan


author: Petr Machata <pmachata@redhat.com> - 2010j-1
changelog:
  - Upstream 2010j:
    - Bahia de Banderas (Mexican state of Nayarit) changed time zone
      UTC-7 to new time zone UTC-6 on April 4, 2010


author: Tom "spot" Callaway <tcallawa@redhat.com> - 2010k-1
changelog:
  - Upstream 2010k:
   - Egypt has announced that DST will be off during Ramadan, but
     DST will resume afterwards (August 10, 2010 - September 9, 2010)


author: Petr Machata <pmachata@redhat.com> - 2010l-2
changelog:
  - Upstream 2010l:
    - Change Cairo's 2010 reversion to DST from the midnight between
      September 8 and 9 to the midnight between September 9 and 10.
    - Change Gaza's 2010 return to standard time to the midnight between
      August 10 and 11.
    - Bahia de Banderas (Mexican state of Nayarit) changed time zone
      UTC-7 to new time zone UTC-6 on April 4, 2010


author: Petr Machata <pmachata@redhat.com> - 2010n-1
changelog:
  - Upstream 2010m:
    - Hong Kong didn't observe DST in 1977
    - In zone.tab, remove obsolete association of Vostok Station with
      South Magnetic Pole; add association with Lake Vostok
  - Upstream 2010n:
    - Change end of DST in Samoa in 2011 from 2011-04-03 0:00 to
      2011-04-03 1:00


author: Petr Machata <pmachata@redhat.com> - 2011b-1
changelog:
  - Upstream 2011b:
    - America/North_Dakota/Beulah: Mercer County, North Dakota, changed
      from the mountain time zone to the central time zone


author: Petr Machata <pmachata@redhat.com> - 2011b-2
changelog:
  - Update of historical stamps for Juneau, Sitka, and histcurrent stamps
    for Metlakatla.  Sitka and Metlakatla are new zones.
  - Delay end of DST in Chile in 2011 until first Sunday in April. (tzdata-2011b-c.patch)


author: Petr Machata <pmachata@redhat.com> - 2011d-1
changelog:
  - Upstream 2011d:
    - Change end of DST in Samoa in 2011.
    - Change start of DST in Cuba in 2011.
    - Move start of DST in Turkey by one day in 2011.
  - Dropped tzdata-2011b-c.patch


author: Petr Machata <pmachata@redhat.com> - 2011g-1
changelog:
  - Upstream 2011e:
    - Morocco introduced DST for 2011 from April 2 to July 31.
    - Delay end of DST in Chile in 2011 until May 7.
  - Upstream 2011f:
    - The Falkland Islands will not turn back clocks this winter, but
      stay on daylight saving time.
  - Upstream 2011g:
    - Egypt abandons DST in 2011 (and forward)
  - Dropped tzdata-2011d-chile.patch
  - Dropped tzdata-2011d-morocco.patch


author: Petr Machata <pmachata@redhat.com> - 2011h-1
changelog:
  - Upstream 2011h:
    - Russia abandons DST in 2011.
    - *.tab: change AN (Netherlands Antilles) to CW (Curacao)


author: Petr Machata <pmachata@redhat.com> - 2011h-2
changelog:
  - Patch for upcoming change in Newfoundland.  The transition time
    changes from 12:01 AM to 2:00 AM.


author: Petr Machata <pmachata@redhat.com> - 2011h-1
changelog:
  - Upstream 2011i:
    - Add Africa/Juba (South Sudan) zone
    - Samoa skips over the date line on 2011-12-30
    - Use KALT as abbreviation for Europe/Kalinigrad
    - Canonical version of the Newfoundland patch
    - Change America/Resolute use of EST to 2006-2007 only
    - Assume Metlakatla abandoned use of daylight saving in 1983
    - Sync iso3166.tab and zone.tab with above
  - Resolved: #734063


author: Petr Machata <pmachata@redhat.com> - 2011k-0.1.20110921
changelog:
  - Upstream 2011j:
    - Fix the Samoa date line skip
    - Changes in past timestamp typos several Africa zones
  - Proposed upstream 2011k:
    - Belarus and Ukraine adopt permanent DST in 2011
    - Palestine suspends DST during Ramadan in 2011
    - Gaza and West Bank split in 2011.  West Bank is tracked in the
      timezone Asia/Hebron.  zone.tab update accordingly.
  - Resolves: #737896


author: Petr Machata <pmachata@redhat.com> - 2011l-1
changelog:
  - Upstream 2011l:
    - Fix ancient stamps for America/Sitka
    - Asia/Hebron transitioned to standard time already on Sep 30, not Oct 3
    - Fiji will introduce DST on Oct 22


author: Petr Machata <pmachata@redhat.com> - 2011l-2
changelog:
  - State of Bahia, Brazil, to resume Summer Time on Oct 16
  - The project moved, reflect this in URL
  - Resolves: #746183


author: Petr Machata <pmachata@redhat.com> - 2011l-1
changelog:
  - Rebase to 2011n
    - Drop all patches, including the Kemerovo patch, which is not in
      upstream
    - Cuba postponed DST by two weeks to Nov 13
    - Fiji will enter DST on Jan 21
  - Resolved: #748778


author: Petr Machata <pmachata@redhat.com> - 2012b-1
changelog:
  - Rebase to 2012b; changes vs. 2011n-5:
    - Changes to zones for Antarctica stations
    - Armenia abolished DST in 2012 and forward
    - Cuba enters DST on 31st March
    - Falkland Islands will stay on permanent Summer Time
    - New zone for Creston Valley, Canada, which differs from Dawson
      Creek in past stamps.  Changes to historical stamps in Canada.
    - Last year, Tokelau skipped over the date line together with Samoa


author: Petr Machata <pmachata@redhat.com> - 2012b-2
changelog:
  - Morocco DST starts on the last Sunday of March (March 25, 2012) and
    ends on last Sunday of September, except the month of Ramadan.  It
    is currently unclear what that Ramadan bit means, so this is not
    covered by the patch as of now.


author: Petr Machata <pmachata@redhat.com> - 2012c-1
changelog:
  - Upstream 2012c
    - Haiti observes DST from 2012 on
    - Gaza Strip and Hebron observe DST in 2012
    - Change start of DST in Syria to last Friday in March


author: Petr Machata <pmachata@redhat.com> - 2012d-1
changelog:
  - Upstream 2012d
    - Morocco will not observe DST during the month of Ramadan.
      DST cessation end date was corrected.


author: Petr Machata <pmachata@redhat.com> - 2012f-1
changelog:
  - Fiji will start daylight savings at 2 am on Sunday 21st October 2012
    and end at 3 am on Sunday 20th January 2013.  Guess it will be like
    that in following years as well.
  - Resolves: #857231


author: Petr Machata <pmachata@redhat.com> - 2012g-1
changelog:
  - Upstream 2012g
    - Adjust the packaging for new Makefile
    - Palestine: Fall transition was Sep 21, not Sep 28
    - Samoa: Daylight Saving Time commences on Sunday 30th September
      2012 and ends on Sunday 7th of April 2013.
  - Resolves: #868173


author: Petr Machata <pmachata@redhat.com> - 2012h-1
changelog:
  - Upstream 2012h
    - Brazilian state Bahia no longer has DST.
    - Brazilian state Tocantins now has DST.
    - Israel has new DST rules next year.
    - Jordan stays on DST this winter.


author: Petr Machata <pmachata@redhat.com> - 2012h-2
changelog:
  - Switch back to using system zic, ignore upstream Makefile at all.
    We do so for java anyway.
  - Drop Factory from distribution


author: Petr Machata <pmachata@redhat.com> - 2013b-1
changelog:
  - Upstream 2013b
    - Paraguay will end DST on March 24 this year
    - Haiti uses US daylight-saving rules this year
    - Morocco does not observe DST during Ramadan
  - Upstream 2013a
    - Retire Chile patch, 2013a has the data
    - New Zones Asia/Khandyga, Asia/Ust-Nera, Europe/Busingen
    - Many changes in historical timestamps


author: Petr Machata <pmachata@redhat.com> - 2013c-1
changelog:
  - Upstream 2013c
    - Sync past stamps for Palestine and West Bank with timeanddate.com
    - Assume that the recent change to Paraguay's DST rules is permanent
    - Macquarie was uninhabited between 1919 and 1948.  It's also part
      of Australia (update in zone.tab).


author: Petr Machata <pmachata@redhat.com> - 2013c-2
changelog:
  - Update descriptions in iso3166.tab; make Jerusalem coordinates in
    zone.tab more precise
    (0001-Adjust-commentary-to-try-to-defuse-recent-issues-som.patch)
  - Update local mean time for Jerusalem to match more-precise longitude
    (0002-asia-Asia-Jerusalem-Fix-LMT-to-match-more-precise-lo.patch)
  - Move Morocco's midsummer 2013 transitions
    (0003-Move-Morocco-s-midsummer-2013-transitions.patch)
  - Israel now falls back on the last Sunday of October
    (0004-Israel-now-falls-back-on-the-last-Sunday-of-October.patch)


author: Patsy Franklin <pfrankli@redhat.com> 2013h-1
changelog:
  - Rebase to 2013h 
    - Lybia switched to using UTC+2 without DST
    - Western Sahara (Africa/ElAaiun) uses Morocco's DST rules
    - Acres and Amazon swithc to UTC-4 and UTC-5 on 2013-11-10
    - Add entries for DST transition in Morocco in the year 2038


author: Patsy Franklin <pfrankli@redhat.com> 2013i-1
changelog:
  - Rebase with early release of 2013i from Paul Eggert github.
    - Jordan switches back to standard time at 00:00 on December 20,2013.
    - The 2006-2011 transition schedule is planned to resume in 2014.
    - The compile-time flag NOSOLAR has been removed.
    - The files solar87, solar88, and solar89 are no longer distributed.
    - tz-link.htm now mentions Noda Time.


author: Patsy Franklin <pfrankli@redhat.com> 2014c-1
changelog:
  - Rebase to 2014c
    -Egypt will re-apply DST on May 15 at 24:00, except that DST
     will not be observed during Ramadan.


author: Patsy Franklin <pfrankli@redhat.com> - 2014e-3
changelog:
  - Rebase to 2014e
    - Morrocco suspends DTS for Ramadan
         June 28 at 03:00 and August 2 at 02:00
    - Egypt suspends DTS for Ramadan
         June 26 and July 31 at 24:00
  - Additional edit to support OpenJDK8. (#1091029)


author: Patsy Franklin <pfrankli@redhat.com> - 2014f-1
changelog:
  - Rebase to 2014f
    - Russian time zone changes effective 2014-10-26
    - Several other time zone abbreviation changes as described in
      the NEWS file.


author: Patsy Franklin <pfrankli@redhat.com> - 2014g-1
changelog:
  - Rebase to 2014g
    - Turks & Caicos is switching from US eastern time to UTC-4 year-round,
      modeled as a switch from EST/EDT to AST on 2014-11-02 at 02:00.


author: Patsy Franklin <pfrankli@redhat.com> - 2014i-1
changelog:
  - Rebase to 2014i
    - Pacific/Fiji will observe DST from 2014-11-02 02:00 to 2015-01-18 03:00.
    - A new Zone Pacific/Bougainville, for the part of Papua New Guinea
      that plans to switch from UTC+10 to UTC+11 on 2014-12-28 at 02:00


author: Patsy Franklin <pfrankli@redhat.com> - 2014j-1
changelog:
  - Rebase to 2014j
    - Turks & Caicos' switch from US eastern time to UTC-4 year-round
      did not occur on 2014-11-02 at 02:00.  It's currently scheduled
      for 2015-11-01 at 02:00.


author: Patsy Franklin <pfrankli@redhat.com> - 2015a-1
changelog:
  - Rebase to 2015a
    - New leap second 2015-06-30 23:59:60 UTC as per IERS Bulletin C 49.
    - The Mexican state of Quintana Roo, represented by America/Cancun,
      will shift from Central Time with DST to Eastern Time without DST
      on 2015-02-01 at 02:00.
    - Chile will not change clocks in April or thereafter; its new standard time
      will be its old daylight saving time.  This affects America/Santiago,
      Pacific/Easter, and Antarctica/Palmer.


author: Patsy Franklin <pfrankli@redhat.com> - 2015b-1
changelog:
  - Rebase to 2015b
    - Mongolia will start observing DST again this year, from the last
      Saturday in March at 02:00 to the last Saturday in September at 00:00.
    - Palestine will start DST on March 28, not March 27.  Also,
      correct the fall 2014 transition from September 26 to October 24.
      Adjust future predictions accordingly.


author: Patsy Franklin <pfrankli@redhat.com> - 2015c-1
changelog:
  - Rebase to 2015c
    - Egypt's spring-forward transition is at 24:00 on April's last Thursday,
      not 00:00 on April's last Friday.  2015's transition will therefore be on
      Thursday, April 30 at 24:00, not Friday, April 24 at 00:00.  Similar fixes
      apply to 2026, 2037, 2043, etc.  (Thanks to Steffen Thorsen.)
  - Rebase javazic tool to match latest upstream OpenJDK version


author: Patsy Franklin <pfrankli@redhat.com> - 2015d-1
changelog:
  - Rebase to 2015d
    - Egypt will not observe DST in 2015 and will consider canceling it
      permanently.  For now, assume no DST indefinitely.
    - The abbreviations for Hawaii-Aleutian standard and daylight times
      have been changed from HAST/HADT to HST/HDT, as per US Government
      Printing Office style.  This affects only America/Adak since 1983,
      as America/Honolulu was already using the new style.


author: Patsy Franklin <pfrankli@redhat.com> - 2015d-3
changelog:
  - Morocco will suspend DST from 2015-06-14 03:00 through 2015-07-19 02:00,
    not 06-13 and 07-18 as we had guessed.


author: Patsy Franklin <pfrankli@redhat.com> - 2015e-1
changelog:
  - Morocco will suspend DST from 2015-06-14 03:00 through 2015-07-19 02:00,
    not 06-13 and 07-18 as we had guessed.
  - Assume Cayman Islands will observe DST starting next year, using US rules.
    Although it isn't guaranteed, it is the most likely.


author: Patsy Franklin <pfrankli@redhat.com> - 2015f-1
changelog:
  - Rebase to 2015f
    - North Korea switches to +0830 on 2015-08-15.
      The abbreviation remains "KST".
    - Uruguay no longer observes DST.


author: Patsy Franklin <pfrankli@redhat.com> - 2015g-1
changelog:
  - Rebase to 2015g
    - Turkey's 2015 fall-back transition is scheduled for Nov. 8, not Oct. 25.
    - Norfolk moves from +1130 to +1100 on 2015-10-04 at 02:00 local time.
    - Fiji's 2016 fall-back transition is scheduled for January 17, not 24.
    - Fort Nelson, British Columbia will not fall back on 2015-11-01.  It has
      effectively been on MST (-0700) since it advanced its clocks on 2015-03-08.
      New zone America/Fort_Nelson.


author: Patsy Franklin <pfrankli@redhat.com> - 2016a-1
changelog:
  - Rebase to 2016a
    - America/Cayman will not observe daylight saving this year after all.
      Revert our guess that it would.
    - Asia/Chita switches from +0800 to +0900 on 2016-03-27 at 02:00.
    - Asia/Tehran now has DST predictions for the year 2038 and later,
      to be March 21 00:00 to September 21 00:00.  This is likely better
      than predicting no DST, albeit off by a day every now and then.


author: Patsy Franklin <pfrankli@redhat.com> - 2016b-1
changelog:
  - Rebase to 2016b
    - New zones Europe/Astrakhan and Europe/Ulyanovsk for Astrakhan and
      Ulyanovsk Oblasts, Russia, both of which will switch from +03 to +04 on
      2016-03-27 at 02:00 local time.  They need distinct zones since their
      post-1970 histories disagree.  New zone Asia/Barnaul for Altai Krai and
      Altai Republic, Russia, which will switch from +06 to +07 on the same date
      and local time.  The Astrakhan change is already official; the others have
      passed the first reading in the State Duma and are extremely likely.
      Also, Asia/Sakhalin moves from +10 to +11 on 2016-03-27 at 02:00.
    - As a trial of a new system that needs less information to be made up,
      the new zones use numeric time zone abbreviations like "+04"
      instead of invented abbreviations like "ASTT".
    - Haiti will not observe DST in 2016.
    - Palestine's spring-forward transition on 2016-03-26 is at 01:00, not 00:00.
      Guess future transitions will be March's last Saturday at 01:00, not March's
      last Friday at 24:00.


author: Patsy Franklin <pfrankli@redhat.com> - 2016c-1
changelog:
  - Rebase to 2016c
    - Azerbaijan no longer observes DST.
    - Chile changes from permanent DST to seasonal DST.


author: Patsy Franklin <pfrankli@redhat.com> - 2016d-1
changelog:
  - Rebase to 2016d
    - America/Caracas switches from -0430 to -04 on 2016-05-01 at 02:30.
    - Asia/Magadan switchefrom +10 to +11 on 2016-04-24 at 02:00.
    - New zone Asia/Tomsk, split off from Asia/Novosibirsk.  It covers
      Tomsk Oblast, Russia, which switches from +06 to +07 on 2016-05-29
      at 02:00.


author: Patsy Franklin <pfrankli@redhat.com> - 2016f-1
changelog:
  - Rebase to 2016f
    - Egypt cancelled DST.
    - Asia/Novosibirsk transitions from +06 to +07 on 2016-07-24 at 02:00.


author: Patsy Franklin <pfrankli@redhat.com> - 2016g-1
changelog:
  - Rebase to 2016g
    - Turkey permanently switches from +02 to +03 as of 2016-09-07,
    - Per IERS Bulletin C 52, leap second to be added on 2016-09-31 at 23:59:60.


author: Patsy Franklin <pfrankli@redhat.com> - 2016h-1
changelog:
  - Rebase to 2016h
    - DST ends in Asia/Gaza and Asia/Hebron on 2016-10-29 at 01:00,
      not the predicted date of 2016-10-21 at 00:00.


author: Patsy Franklin <pfrankli@redhat.com> - 2016i-1
changelog:
  - Rebase to 2016i
    - Pacific/Tongatapu now begins DST on 2016-11-06 at 02:00 and ends
      on 2017-01-15 at 03:00.
    - Northern Cyprus is changed to +03 year round. This results in a
      split in Cyprus time zones starting 2016-10-30 at 04:00 and
      creates a new zone - Asia/Famagusta.
    - Antarctica/Casey changed from +08 to +11 on 2016-10-22.


author: Patsy Franklin <pfrankli@redhat.com> - 2016j-1
changelog:
  - Rebase to 2016j
    - The Saratov Region of Russia is changing from +03 to +04 on
      2016-12-04, resulting in a new timezone Europe/Saratov.


author: Patsy Franklin <pfrankli@redhat.com> - 2017a-1
changelog:
  - Rebase to tzdata-2017a
    - Mongolia no longer observes DST
    - Magallanes region of Chile moves from -04/-03 to -03 year round.
      This results in a new zone, America/Punta_Arenas.


author: Patsy Franklin <pfrankli@redhat.com> - 2017c-1
changelog:
  - Rebase to tzdata-2017c.
    - Northern Cyprus will revert to using EQ rules on October 29, 2017.
    - Sudan will switch from +03 to +02 on November 1, 2017.
    - Tonga will not change it's clocks on Novemeber 5, 2017 ending it's
      experiment with DST.
    - Fiji DST will end on January 14, 2018 rather than January 21, 2018.
    - Namibia - starting September 3, 2017 switches from +)1 with DST to
      +02 all year.  This change takes effect April 1, 2018.
    - Turks & Caicos changes from -04 all year to -05 with US DST starting
      on March 11, 2018.  Effective change date is November 4, 2018.
    - tzdata now includes two text versions of the time zone data - tzdata.zi
      and leapseconds.
    - Includes two patches to deal with build issues.


