# changelog

author: Lubomir Rintel <lkundrak@v3.sk> - 1.10.2-1
changelog:
  - Update to 1.10.2 release (rh #1543498)
  - Don't grab cdc_ether devices on Sierra QMI modems (rh #1712031)


author: Dan Williams <dcbw@redhat.com> 0.2-4
changelog:
  - Update from CVS
  - Improvements:
  	o Better link checking on wireless cards
  	o Panel applet now a Notification Area icon
  	o Static IP configuration support


author: <dcbw@redhat.com> - 0.3.2-2.cvs20041029
changelog:
  - #rh134893# NetworkManagerInfo and the panel-icon life-cycle
  - #rh134895# Status icon should hide when in Wired-only mode
  - #rh134896# Icon code needs rewrite
  - #rh134897# "Other Networks..." dialog needs implementing
  - #rh135055# Menu highlights incorrectly in NM
  - #rh135648# segfault with cipsec0
  - #rh135722# NetworkManager will not allow zaurus to sync via usb0
  - #rh135999# NetworkManager-0.3.1 will not connect to 128 wep
  - #rh136866# applet needs tooltips
  - #rh137047# lots of applets, yay!
  - #rh137341# Network Manager dies after disconnecting from wired network second time
  - Better checking for wireless devices
  - Fix some memleaks
  - Fix issues with dhclient declining an offered address
  - Fix an activation thread deadlock
  - More accurately detect "Other wireless networks" that are encrypted
  - Don't bring devices down as much, won't hotplug-spam as much anymore
  	about firmware
  - Add a "network not found" dialog when the user chooses a network that could
  	not be connected to


author: <dcbw@redhat.com> - 0.3.2-2.cvs20041115
changelog:
  - Update to CVS
  - Much better link detection, works with Open System authentication
  - Blacklist wireless cards rather than whitelisting them


author: <dcbw@redhat.com> - 0.3.2-3.cvs20041117
changelog:
  - Update to CVS
  - Fixes to link detection
  - Better detection of non-ESSID-broadcasting access points
  - Don't dialog-spam the user if a connection fails


author: <dcbw@redhat.com> - 0.3.2-4.3.cvs20041208
changelog:
  - Update to CVS
  - Updates to link detection, DHCP code
  - Remove NMLaunchHelper so we start up faster and don't
  	block for a connection.  This means services that depend
  	on the network may fail if they start right after NM
  - Make sure DHCP renew/rebinding works


author: <dcbw@redhat.com> - 0.3.3-1.cvs20050112
changelog:
  - Update to latest CVS
  - Fixes to DHCP code
  - Link-Local (ZeroConf/Rendezvous) support
  - Use bind in "caching-nameserver" mode to work around stupidity
  	in glibc's resolver library not recognizing resolv.conf changes
  - #rh144818# Clean up the specfile (Patch from Matthias Saou)
  - Ad-Hoc mode support with Link-Local addressing only (for now)
  - Fixes for device activation race conditions
  - Wireless scanning in separate thread


author: <dcbw@redhat.com> - 0.3.3-1.cvs20050118
changelog:
  - Fix issue where NM wouldn't recognize that access points were
  	encrypted, and then would try to connect without encryption
  - Refine packaging to put client library in separate package
  - Remove bind+caching-nameserver dep for FC-3, use 'nscd -i hosts'
  	instead.  DNS queries may timeout now right after device
  	activation due to this change.


author: Dan Williams <dcbw@redhat.com> 0.3.3-1.cvs20050124
changelog:
  - Update to latest CVS
  - Make sure we start as late as possible so that we ensure dbus & HAL
  	are already around
  - Fix race in initial device activation


author: Dan Williams <dcbw@redhat.com> 0.3.3-1.cvs20050202
changelog:
  - Display wireless network name in applet tooltip
  - Hopefully fix double-default-route problem
  - Write out valid resolv.conf when we exit
  - Make multi-domain search options work
  - Rework signal strength code to be WEXT conformant, if strength is
  	still wierd then its 95% surely a driver problem
  - Fix annoying instances of suddenly dropping and reactivating a
  	wireless device (Cisco cards were worst offenders here)
  - Fix some instances of NetworkManager not remembering your WEP key
  - Fix some races between NetworkManager and NetworkManagerInfo where
  	NetworkManager wouldn't recognize changes in the allowed list
  - Don't shove Ad-Hoc Access Point MAC addresses into GConf


author: Dan Williams <dcbw@redhat.com> 0.3.3-2.cvs20050214
changelog:
  - Never automatically choose a device that doesn't support carrier detection
  - Add right-click menu to applet, can now "Pause/Resume" scanning through it
  - Fix DHCP Renew/Rebind timeouts
  - Fix frequency cycling problem on some cards, even when scanning was off
  - Play better with IPv6
  - Don't send kernel version in DHCP packets, and ensure DHCP packets are at
  	least 300 bytes in length to work around broken router
  - New DHCP options D-BUS API by Dan Reed
  - Handle multiple domain search options in DHCP responses


author: Dan Williams <dcbw@redhat.com> - 0.4-9.cvs20050404
changelog:
  - Fix some memory leaks (Tom Parker)
  - Join to threads rather than spinning for their completion (Tom Parker)
  - Fix misuse of a g_assert() (Colin Walters)
  - Fix return checking of an ioctl() (Bill Moss)
  - Better detection and matching of hidden access points (Bill Moss)
  - Don't use varargs, and therefore don't crash on PPC (Peter Jones)


author: Dan Williams <dcbw@redhat.com> - 0.4-12.cvs20050404
changelog:
  - Enable OK button correctly in Passphrase and Other Networks dialogs when
  	using ASCII or Hex WEP keys


author: Dan Williams <dcbw@redhat.com> - 0.4-31.cvs20050616
changelog:
  - Update to latest CVS
  	o Clean up wording in Wireless Network Discovery menu
  	o Robert Love's applet beautify patch


author: Dan Williams <dcbw@redhat.com> - 0.4-32.cvs20050617
changelog:
  - Update to latest CVS
  	o VPN connection import/export capability
  	o Fix up some menu item names
  - Move nm-vpn-properties.glade to the gnome subpackage


author: David Zeuthen <davidz@redhat.com> - 0.4-33.cvs20050629
changelog:
  - Update to latest CVS to get latest VPN interface settings to satisfy
    BuildReq for NetworkManager-vpnc in Fedora Extras Development
  - Latest CVS also contains various bug- and UI-fixes


author: Dan Williams <dcbw@redhat.com> - 0.4-35.cvs20050811
changelog:
  - Update to latest CVS
  	o Use DHCP server address as gateway address if the DHCP server doesn't give
  		us a gateway address #rh165698#
  	o Fixes to the applet (Robert Love)
  	o Better caching of information in the applet (Bill Moss)
  	o Generate automatic suggested Ad-Hoc network name from machine's hostname
  		(Robert Love)
  	o Update all network information on successfull connect, not just
  		authentication method


author: Dan Williams <dcbw@redhat.com> - 0.4.1-4.cvs20051009
changelog:
  - Update to latest CVS
  	o Integrate connection progress with applet icon (Chris Aillon)
  	o More information in "Connection Information" dialog (Robert Love)
  	o Shorten time taken to sleep
  	o Make applet icon wireless strength levels a bit more realistic
  	o Talk to named using DBUS rather than spawning our own
  		- You need to add "-D" to the OPTIONS line in /etc/sysconfig/named
  		- You need to set named to start as a service on startup


author: Dan Williams <dcbw@redaht.com> - 0.4.1-5.cvs20051010
changelog:
  - Fix automatic wireless connections
  - Remove usage of NMLoadModules callout, no longer needed
  - Try to fix deadlock when menu is down and keyring dialog pops up


author: Christopher Aillon <caillon@redhat.com> - 0.5.1-3
changelog:
  - Split out the -glib subpackage to have a -glib-devel package as well
  - Add epoch to version requirements for bind and wireless-tools
  - Update URL of project


author: Dan Williams <dcbw@redhat.com> 0.5.1-8.cvs20060131
changelog:
  - Switch to autostarting the applet instead of having it be session-managed
  - Work better with non-broadcasting access points
  - Add more manufacturer default SSIDs to the blacklist


author: Dan Williams <dcbw@redhat.com> 0.5.1-10.cvs20060205
changelog:
  - Workarounds for madwifi/Atheros cards
  - Do better with non-SSID-broadcasting access points
  - Fix hangs when access points change settings


author: Dan Williams <dcbw@redhat.com> 0.5.1-13.cvs20060221
changelog:
  - Add BuildRequires: libnl-devel (#rh179438#)
  - Fix libnm_glib to not clobber an application's existing dbus connection
  	(#rh177546#, gnome.org #326572)
  - libnotify support
  - AP compatibility fixes


author: Dan Williams <dcbw@redhat.com> 0.5.1-18.cvs20060301
changelog:
  - Fix VPN-related crash
  - Fix issue where NM would refuse to activate a VPN connection once it had timed out
  - Log wpa_supplicant output for better debugging


author: Dan Williams <dcbw@redhat.com> - 0.6.2-1
changelog:
  - Update to 0.6.2:
  	* Fix various WPA-related bugs
  	* Clean up leaks
  	* Increased DHCP timeout to account for slow DHCP servers, or STP-enabled
  		switches
  	* Allow applet to reconnect on dbus restarts
  	* Add "Dynamic WEP" support
  	* Allow hiding of password/key entry text
  	* More responsive connection switching


author: Jeremy Katz <katzj@redhat.com> - 0.6.2-2.fc6
changelog:
  - use the hal device type instead of poking via ioctl so that wireless
    devices are properly detected even if the kill switch has been used


author: Bill Nottingham <notting@redhat.com> - 0.6.2-3.fc6
changelog:
  - use the same 0.6.2 tarball as FC5, so we have the same VPN interface
    (did he fire ten args, or only nine?)


author: Dan Williams <dcbw@redhat.com> - 0.7.0-0.cvs20060521
changelog:
  - Update to latest CVS
  - Drop special-case-madwifi.patch, since WEXT code is in madwifi-ng trunk now


author: Dan Williams <dcbw@redhat.com> - 0.7.0-0.cvs20060529
changelog:
  - Update to latest CVS
  	o Gnome.org #333420: dialog do not have window icons
  	o Gnome.org #336913: HIG tweaks for vpn properties pages
  	o Gnome.org #336846: HIG tweaks for nm-vpn-properties
  	o Gnome.org #336847: some bugs in nm-vpn-properties args parsing
  	o Gnome.org #341306: nm-vpn-properties crashes on startup
  	o Gnome.org #341263: Version 0.6.2-0ubuntu5 crashes on nm_device_802_11_wireless_get_type
  	o Gnome.org #341297: displays repeated keyring dialogs on resume from suspend
  	o Gnome.org #342400: Building libnm-util --without-gcrypt results in linker error
  	o Gnome.org #342398: Eleminate Gnome dependency for NetworkManager
  	o Gnome.org #336532: declaration of 'link' shadows a global declaration
  - Specfile fixes (#rh187489#)


author: Dan Williams <dcbw@redhat.com> - 1:0.6.4-2
changelog:
  - Revert FC6 to latest stable NM
  - Update to stable snapshot
  - Remove bind/caching-nameserver hard requirement


author: Dan Williams <dcbw@redhat.com> - 1:0.6.5-0.cvs20061025
changelog:
  - Update to a stable branch snapshot
      - Gnome applet timeout/redraw suppression when idle
      - Backport of LEAP patch from HEAD (from Thiago Bauermann)
      - Backport of asynchronous scanning patch from HEAD
      - Make renaming of VPN connections work (from Tambet Ingo)
      - Dial down wpa_supplicant debug spew
      - Cleanup of key/passphrase request scenarios (from Valentine Sinitsyn)
      - Shut down VPN connections on logout (from Robert Love)
      - Fix WPA passphrase hashing on PPC


author: Matthias Clasen <mclasen@redhat.com>
changelog:
  - Own the /etc/NetworkManager/dispatcher.d directory
  - Require pkgconfig for the -devel packages
  - Fix compilation with dbus 1.0


author: Dan Williams <dcbw@redhat.com> - 1:0.6.5-0.7.svn2547
changelog:
  - Update from trunk
  	* Updated translations
  	* Cleaned-up VPN properties dialogs
  	* Fix 64-bit kernel leakage issues in WEXT
  	* Don't capture and redirect wpa_supplicant log output


author: Dan Williams <dcbw@redhat.com> 1:0.6.5-4
changelog:
  - Fix ethernet link detection (gnome #354565, rh #194124)
  - Fix perpetual credentials request with private key passwords in the applet
  - Sleep a bit before activating wireless cards to work around driver bugs


author: Dan Williams <dcbw@redhat.com> 1:0.6.5-5
changelog:
  - Fix applet crash on 64-bit platforms when choosing
      "Connect to other wireless network..." (gnome.org #435036)
  - Add debug output for ethernet device link changes


author: Dan Williams <dcbw@redhat.com> 1:0.6.5-6
changelog:
  - Update to stable branch snapshot:
      - More fixes for ethernet link detection (gnome #354565, rh #194124)
      - Support for HAL-detected rfkill switches


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2880
changelog:
  - New snapshot
  	- Fix applet icon sizing on start (mclasen)
  	- Fix nm-tool installation (mclasen)
  	- Fix 'state' method call return (#303271)
  	- Fix 40-bit WEP keys (again)
  	- Fix loop when secrets were wrong/invalid
  	- Fix applet crash when clicking Cancel in the password dialog
  	- Ensure NM doesn't get stuck waiting for the supplicant to re-appear
  		if it crashes or goes away
  	- Make VPN properties applet work again
  	- Increase timeout for network password entry


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2886
changelog:
  - New snapshot
  	- Make wired device carrier state work in the applet
  	- Fix handling of errors with unencrypted APs
  	- Fix "frozen" applet icon by reporting NM state better
  	- Fix output of AP frequency in nm-tool


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2914
changelog:
  - New snapshot
  	- Add WPA passphrase support to password dialog
  	- Applet now reflects actual VPN behavior of one active connection
  	- Applet now notices VPN active connections on startup
  	- Fix connections with some WPA and WEP keys


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2961
changelog:
  - New snapshot
  	- Add timestamps to networks to connect to last used wireless network
  	- Turn autoconnect on in the applet
  	- Hidden SSID support
  	- Invalidate failed or cancelled connections again
  	- Fix issues with reactivation of the same device
  	- Handle connection updates in the applet (ex. find new VPN connections)
  	- Fix vertical sizing of menu items
  	- Fix AP list on wireless devices other than the first device in the applet
  	- Fix matching of current AP with the right menu item


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2962
changelog:
  - Fix merging of non-SSID-broadcasting APs into a device's scan list
  - Speed up opening of the applet menu


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2970
changelog:
  - Fix segfault with deferred connections
  - Fix default username with vpnc VPN plugin
  - Hidden SSID fixes


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2994
changelog:
  - Re-enable "Connect to other network"
  - Switch to new GUI bits for wireless security config and password entry


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn3008
changelog:
  - Make WPA-EAP and Dynamic WEP options connect successfully
  - Static IPs are now handled correctly in NM itself


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn3014
changelog:
  - Suppress excessive GConf updates which sometimes caused secrets to be cleared
      at the wrong times, causing connections to fail
  - Various EAP and LEAP related fixes


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn3016
changelog:
  - Fix getting current access point
  - Fix WPA Enterprise connections
  - Wireless dialog now defaults to sensible choices based on the connection
  - Tell nscd to restart if needed, don't silently kill it


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.4.svn3020
changelog:
  - Handle PEM certificates
  - Hide WPA-PSK Type combo since it's as yet unused
  - Fix applet crash when AP security options changed and old secrets are still
      in the keyring
  - Fix applet crash connecting to unencrypted APs via the other network dialog


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.4.svn3030
changelog:
  - Bring up ethernet devices by default if no connections are defined (rh #339201)
  - Fix crash when switching networks or bringing up secrets dialog (rh #353091)
  - Fix crash when editing VPN connection properties a second time
  - Fix crash when cancelling the secrets dialog if another connection was
      activated in the mean time
  - Fix disembodied notification bubbles (rh #333391)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.6.2.svn3080
changelog:
  - Clarify naming of WPA & WPA2 Personal encryption options (rh #374861, rh #373831)
  - Don't require a CA certificate for applicable EAP methods (rh #359001)
  - Fix certificate and private key handling for EAP-TTLS and EAP-TLS (rh #323371)
  - Fix applet crash with USB devices (rh #337191)
  - Support upgrades from NM 0.6.x GConf settings


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.6.3.svn3096
changelog:
  - Fix connections when picking a WPA Enterprise AP from the menu
  - Fix issue where applet would provide multiple same connections to NM


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3133
changelog:
  - Fix applet crash when choosing to ignore the CA certificate (rh #359001)
  - Fix applet crash when editing VPN properties and VPN connection failures (rh #409351)
  - Add file filter name in certificate file picker dialog (rh #410201)
  - No longer start named when starting NM (rh #381571)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3138
changelog:
  - Fix applet connection comparison which failed to send connection updated
      signals to NM in some cases
  - Make VPN connection applet more robust against plugin failures


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3235
changelog:
  - Fix crash when activating a mobile broadband connection
  - Better handling of non-SSID-broadcasting APs on kernels that support it
      (gnome.org #464215) (rh #373841)
  - Honor DHCP-server provided MTU if present (gnome.org #332953)
  - Use previous DNS settings if the VPN concentrator doesn't provide any
      (gnome.org #346833)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3261
changelog:
  - Add CDMA mobile broadband support (if supported by HAL)
  - Rework applet connection and icon handling
  - Enable connection editor (only for deleting connections)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3302
changelog:
  - Enable system settings service
  - Allow explicit disconnection of mobile broadband devices
  - Fix applet memory leaks (rh #430178)
  - Applet Connection Information dialog tweaks (gnome.org #505899)
  - Filter input characters to passphrase/key entry (gnome.org #332951)
  - Fix applet focus stealing prevention behavior


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3370
changelog:
  - Fix crash of nm-system-settings on malformed ifcfg files (rh #434919)
  - Require gnome-icon-theme to pick up lock.png (rh #435344)
  - Fix applet segfault after connection removal via connection editor or GConf


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3417
changelog:
  - Honor DHCP rebinds
  - Multiple active device support
  - Better error handling of mobile broadband connection failures
  - Allow use of interface-specific dhclient config files
  - Recognize system settings which have no TYPE item


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.1.svn3472
changelog:
  - Fix crashes on suspend/resume and exit (rh #437426)
  - Ensure there's always an option to chose the wired device
  - Never set default route via an IPv4 link-local addressed device (rh #437338)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.1.svn3521
changelog:
  - Show VPN failures
  - Support Static WEP key indexes
  - Fix parsing of WEP keys from ifcfg files
  - Pre-fill wireless security UI bits in connection editor and applet


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.1.svn3547
changelog:
  - Fix WEP key index handling in UI
  - Fix handling of NM_CONTROLLED in ifcfg files
  - Show device managed state in applet menu
  - Show wireless enabled state in applet menu
  - Better handling of default DHCP connections for wired devices
  - Fix loading of connection editor on KDE (rh #435344)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.1.svn3566
changelog:
  - Turn on Add/Edit in the connection editor
  - Don't flush or change IPv6 addresses or routes
  - Enhance nm-online tool
  - Some serial communication fixes for mobile broadband


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.2.svn3578
changelog:
  - Add dbus-glib-devel BuildRequires for NetworkManager-glib-devel (rh #442978)
  - Add PPP settings page to connection editor
  - Fix a few crashes with PPPoE
  - Fix active connection state changes that confused clients


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.2.svn3590
changelog:
  - Don't select devices without a default gateway as the default route (rh #437338)
  - Fill in broadcast address if not specified (rh #443474)
  - Respect manual VPN IPv4 configuration options
  - Show Connection Information for the device with the default route only


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.2.svn3614
changelog:
  - Don't ask for wireless keys when the driver sends disconnect events during
  	association; wait until the entire assocation times out
  - Replace dispatcher daemon with D-Bus activated callout
  - Fix parsing of DNS2 and DNS3 ifcfg file items
  - Execute dispatcher scripts in alphabetical order
  - Be active at runlevel 2
  - Hook up MAC address widgets for wired & wireless; and BSSID widget for wireless
  - Pre-populate anonymous identity and phase2 widgets correctly
  - Clear out unused connection keys from GConf


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.2.svn3619
changelog:
  - Fix device initialization race that caused ethernet devices to get stuck on
      startup
  - Fix PPPoE connections not showing up in the applet
  - Fix disabled OK button in connection editor some wireless and IP4 settings
  - Don't exit if HAL isn't up yet; wait for it
  - Fix a suspend/resume crash


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.2.svn3622
changelog:
  - Guess WEP key type in applet when asking for new keys
  - Correct OK button sensitivity in applet when asking for new WEP keys


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.3.svn3665
changelog:
  - Fix issues with the Fedora plugin not noticing changes made by
      system-config-network (rh #444502)
  - Allow autoconnection of GSM and CDMA connections
  - Multiple IP address support for user connections
  - Fixes for Mobile Broadband cards that return line speed on connect
  - Implement PIN entry for GSM mobile broadband connections
  - Fix crash when editing unencrypted WiFi connections in the connection editor


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.3.svn3667
changelog:
  - Restore behavior of marking wifi devices as "down" when disabling wireless
  - Fix a crash on resume when a VPN was active when going to sleep


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.3.svn3675
changelog:
  - Read global gateway from /etc/sysconfig/network if missing (rh #446527)
  - nm-system-settings now terminates when dbus goes away (rh #444976)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.4.svn3675
changelog:
  - Move NM later in the shutdown process (rh #449070)
  - Move libnm-util into a subpackage to allow NM to be removed more easily (rh #351101)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.10.svn3801
changelog:
  - Move VPN configuration into connection editor
  - Fix mobile broadband username/password issues
  - Fix issues with broken rfkill setups (rh #448889)
  - Honor APN setting for GSM mobile broadband configurations
  - Fix adding CDMA connections in the connection editor


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn3830
changelog:
  - Expose server-returned DHCP options via D-Bus
  - Use avahi-autoipd rather than old built-in IPv4LL implementation
  - Send hostname to DHCP server if provided (DHCP_HOSTNAME ifcfg option)
  - Support sending DHCP Client Identifier to DHCP server
  - Allow forcing 802.1x PEAP Label to '0'
  - Make connection sharing more robust
  - Show status for shared and Ad-Hoc connections if no other connection is active


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn3846
changelog:
  - Convert stored IPv4 static IP addresses to new prefix-based scheme automatically
  - Fix pppd connections to some 3G providers (rh #455348)
  - Make PPPoE "Show Password" option work
  - Hide IPv4 config options that don't make sense in certain configurations


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn3927
changelog:
  - Expose DHCP-returned options over D-Bus and to dispatcher scripts
  - Add support for customized static routes
  - Handle multiple concurrent 3G or PPPoE connections
  - Fix GSM/CDMA username and password issues
  - Better handling of unmanaged devices from ifcfg files
  - Fix timeout handling of errors during 3G connections
  - Fix some routing issues (rh #456685)
  - Fix applet crashes after removing a device (rh #457380)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn4022
changelog:
  - Fix parsing of DOMAIN in ifcfg files (rh #459370)
  - Fix reconnection to mobile broadband networks after an auth failure
  - Fix recognition of timeouts of PPP during mobile broadband connection
  - More compatible connection sharing (rh #458625)
  - Fix DHCP in minimal environments without glibc locale information installed
  - Add support for Option mobile broadband devices (like iCON 225 and iCON 7.2)
  - Add IP4 config information to dispatcher script environment
  - Merge WEP ASCII and Hex key types for cleaner UI
  - Pre-fill PPPoE password when authentication fails
  - Fixed some changes not getting saved in the connection editor
  - Accept both prefix and netmask in the conection editor's IPv4 page


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn4174
changelog:
  - Ensure that mobile broadband cards are powered up before trying to use them
  - Hostname changing support (rh #441453)
  - Fix mobile broadband secret requests to happen less often
  - Better handling of default devices and default routes
  - Better information in tooltips and notifications
  - Various UI cleanups; hide widgets that aren't used (rh #465397, rh #465395)
  - Accept different separators for DNS servers and searches
  - Make applet's icon accurately reflect signal strength of the current AP


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn4201
changelog:
  - Fix issues with hostname during anaconda installation (rh #461933)
  - Fix Ad-Hoc WPA connections (rh #461197)
  - Don't require gnome-panel or gnome-panel-devel (rh #427834)
  - Fix determination of WPA encryption capabilities on some cards
  - Fix conflicts with PPTP and vpnc plugins
  - Allow .cer file extensions when choosing certificates


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn4229
changelog:
  - More reliable mobile broadband card initialization
  - Handle mobile broadband PINs correctly when PPP passwords are also used
  - Additional PolicyKit integration for editing system connections
  - Close the applet menu if a keyring password is needed (rh #353451)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.12.svn4293
changelog:
  - Update to NetworkManager 0.7.0 RC2
  - Handle gateways on a different subnet from the interface
  - Clear VPN secrets on connection failure to ensure they are requested again (rh #429287)
  - Add support for PKCS#12 private keys (rh #462705)
  - Fix mangling of VPN's default route on DHCP renew
  - Fix type detection of qemu/kvm network devices (rh #466340)
  - Clear up netmask/prefix confusion in the connection editor
  - Make the secrets dialog go away when it's not needed
  - Fix inability to add system connections (rh #471308)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.12.svn4295
changelog:
  - Fix issues reading ifcfg files
  - Previously fixed:
  - Doesn't send DHCP hostname (rh #469336)
  - 'Auto eth0' forgets settings (rh #468612)
  - DHCP renewal sometimes breaks VPN (rh #471852)
  - Connection editor menu item in the wrong place (rh #471495)
  - Cannot make system-wide connections (rh #471308)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.12.svn4296
changelog:
  - Fix PIN/PUK issues with high-speed Option HSDPA mobile broadband cards
  - Fix desensitized OK button when asking for wireless keys


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-1.git20090102
changelog:
  - Update to 0.7.1 pre-release
  - Allow connections to be ignored when determining the default route (rh #476089)
  - Own /usr/share/gnome-vpn-properties (rh #477155)
  - Fix log flooding due to netlink errors (rh #459205)
  - Pass connection UUID to dispatcher scripts via the environment
  - Fix possible crash after deactivating a VPN connection
  - Fix issues with editing wired 802.1x connections
  - Fix issues when using PKCS#12 certificates with 802.1x connections


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-2.git20090207
changelog:
  - applet: fix blank VPN connection message bubbles
  - applet: better handling of VPN routing on update
  - applet: silence pointless warning (rh #484136)
  - applet: desensitize devices in the menu until they are ready (rh #483879)
  - nm: Expose WINS servers in the IP4Config over D-Bus
  - nm: Better handling of GSM Mobile Broadband modem initialization
  - nm: Handle DHCP Classless Static Routes (RFC 3442)
  - nm: Fix Mobile Broadband and PPPoE to always use 'noauth'
  - nm: Better compatibility with older dual-SSID AP configurations (rh #445369)
  - nm: Mark nm-system-settings.conf as config (rh #465633)
  - nm-tool: Show VPN connection information
  - ifcfg-rh: Silence message about ignoring loopback config (rh #484060)
  - ifcfg-rh: Fix issue with wrong gateway for system connections (rh #476089)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.97-1
changelog:
  - Update to 0.7.1rc1
  - nm: support for Huawei E160G mobile broadband devices (rh #466177)
  - nm: fix misleading routing error message (rh #477916)
  - nm: fix issues with 32-character SSIDs (rh #485312)
  - nm: allow root to activate user connections
  - nm: automatic modem detection with udev-extras
  - nm: massive manpage rewrite
  - applet: fix crash when showing the CA certificate ignore dialog a second time
  - applet: clear keyring items when deleting a connection
  - applet: fix max signal strength calculation in menu (rh #475123)
  - applet: fix VPN export (rh #480496)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.97-4.git20090219
changelog:
  - Fix PEAP version selection in the applet (rh #468844)
  - Match hostname behavior to 'network' service when hostname is localhost (rh #441453)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.97-5.git20090220
changelog:
  - Use IFF_LOWER_UP for carrier detect instead of IFF_RUNNING
  - Add small delay before probing cdc-acm driven mobile broadband devices


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.98-1.git20090225
changelog:
  - Fix getting secrets for system connections (rh #486696)
  - More compatible modem autodetection
  - Better handle minimal ifcfg files


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.99-1
changelog:
  - nm: make default wired "Auto ethX" connection modifiable if an enabled system settings
      plugin supports modifying connections (rh #485555)
  - nm: manpage fixes (rh #447233)
  - nm: CVE-2009-0365 - GetSecrets disclosure
  - applet: CVE-2009-0578 - local users can modify the connection settings
  - applet: fix inability to choose WPA Ad-Hoc networks from the menu
  - ifcfg-rh: add read-only support for WPA-PSK connections


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.99-2
changelog:
  - Fix conflict with NetworkManager-openconnect (rh #489271)
  - Fix possible crash when resynchronizing devices if HAL restarts


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.99-3.5
changelog:
  - nm: work around unhandled device removals due to missing HAL events (rh #484530)
  - nm: improve handling of multiple modem ports
  - nm: support for Sony Ericsson F3507g / MD300 and Dell 5530
  - applet: updated translations


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.99-4
changelog:
  - nm: fix communication with Option GT Max 3.6 mobile broadband cards
  - nm: fix communication with Huawei mobile broadband cards (rh #487663)
  - nm: don't look up hostname when HOSTNAME=localhost unless asked (rh #490184)
  - nm: fix crash during IP4 configuration (rh #491620)
  - nm: ignore ONBOOT=no for minimal ifcfg files (f9 & f10 only) (rh #489398)
  - applet: updated translations


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.99-5
changelog:
  - nm: fix crashes with out-of-tree modules that provide no driver link (rh #492246)
  - nm: fix USB modem probing on recent udev versions


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.100-1
changelog:
  - Update to 0.7.1-rc4
  - nm: use PolicyKit for system connection secrets retrieval
  - nm: correctly interpret errors returned from chmod(2) when saving keyfile system connections
  - editor: use PolicyKit to get system connection secrets


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.100-2.git20090408
changelog:
  - nm: fix recognition of Option GT Fusion and Option GT HSDPA (nozomi) devices (rh #494069)
  - nm: fix handling of spaces in DHCP 'domain-search' option
  - nm: fix detection of newer Option 'hso' devices
  - nm: ignore low MTUs returned by broken DHCP servers


author: Dan Williams <dcbw@redhat.com> - 1:0.7.1-1
changelog:
  - nm: update to 0.7.1
  - nm: fix startup race with HAL causing unmanaged devices to sometimes be managed (rh #494527)


author: Adam Jackson <ajax@redhat.com> 1:0.7.1-4.git20090414
changelog:
  - nm-save-the-leases.patch: Use per-connection lease files, and don't delete
    them on interface deactivate.


author: Dan Williams <dcbw@redhat.com> - 0.7.1-5.git20090617
changelog:
  - nm: fix AT&T Quicksilver modem connections (rh #502002)
  - nm: fix support for s390 bus types (rh #496820)
  - nm: fix detection of some CMOtech modems
  - nm: handle unsolicited wifi scans better
  - nm: resolv.conf fixes when using DHCP and overriding search domains
  - nm: handle WEP and WPA passphrases (rh #441070)
  - nm: fix removal of old APs when none are scanned
  - nm: fix Huawei EC121 and EC168C detection and handling (rh #496426)
  - applet: save WEP and WPA passphrases instead of hashed keys (rh #441070)
  - applet: fix broken notification bubble actions
  - applet: default to WEP encryption for Ad-Hoc network creation
  - applet: fix crash when connection editor dialogs are canceled
  - applet: add a mobile broadband provider wizard


author: Dan Williams <dcbw@redhat.com> - 0.7.1-7.git20090708
changelog:
  - nm: fixes for ZTE/Onda modem detection
  - nm: prevent re-opening serial port when the SIM has a PIN
  - applet: updated translations
  - editor: show list column headers


author: Dan Williams <dcbw@redhat.com> - 0.7.995-0.git20090728
changelog:
  - Update to upstream 'master' branch
  - Use modem-manager for better 3G modem support
  - Integrated system settings with NetworkManager itself
  - Use udev instead of HAL


author: Dan Williams <dcbw@redhat.com> - 0.7.995-3.git20090813
changelog:
  - nm: add iSCSI support
  - nm: add connection assume/takeover support for ethernet (rh #517333)
  - nm: IPv6 fixes
  - nm: re-add OLPC XO-1 mesh device support (removed with 0.7.0)
  - applet: better WiFi dialog focus handling


author: Dan Williams <dcbw@redhat.com> - 0.7.996-1.git20090826
changelog:
  - nm: IPv6 zeroconf support and fixes
  - nm: port to polkit (rh #499965)
  - nm: fixes for ehea devices (rh #511304) (rh #516591)
  - nm: work around PPP bug causing bogus nameservers for mobile broadband connections
  - editor: fix segfault with "Unlisted" plans in the mobile broadband assistant


author: Dan Williams <dcbw@redhat.com> - 0.7.996-2.git20090921
changelog:
  - nm: allow disconnection of all device types
  - nm: ensure that wired connections are torn down when their hardware goes away
  - nm: fix crash when canceling a VPN's request for secrets
  - editor: fix issues changing connections between system and user scopes
  - editor: ensure changes are thrown away when editing is canceled
  - applet: ensure connection changes are noticed by NetworkManager
  - applet: fix crash when creating new connections
  - applet: actually use wired 802.1x secrets after they are requested


author: Dan Williams <dcbw@redhat.com> - 0.7.996-3.git20090928
changelog:
  - nm: fix connection takeover when carrier is not on
  - nm: handle certificate paths (CA chain PEM files are now fully usable)
  - nm: defer action for 4 seconds when wired carrier drops
  - ifcfg-rh: fix writing WPA passphrases with odd characters
  - editor: fix editing of IPv4 settings with new connections (rh #525819)
  - editor: fix random crashes when editing due to bad widget refcounting
  - applet: debut reworked menu layout (not final yet...)


author: Dan Williams <dcbw@redhat.com> - 0.7.996-4.git20091002
changelog:
  - install: fix -gnome package pre script failures (rh #526519)
  - nm: fix failures validating private keys when using the NSS crypto backend
  - applet: fix crashes when clicking on menu but not associated (rh #526535)
  - editor: fix crash editing wired 802.1x settings
  - editor: fix secrets retrieval when editing connections


author: Dan Williams <dcbw@redhat.com> - 0.7.996-5.git20091021
changelog:
  - install: better fix for (rh #526519)
  - install: don't build Bluetooth bits on s390 (rh #529854)
  - nm: wired 802.1x connection activation fixes
  - nm: fix crash after modifying default wired connections like "Auto eth0"
  - nm: ensure VPN secrets are requested again after connection failure
  - nm: reset 'accept_ra' to previous value after deactivating IPv6 connections
  - nm: ensure random netlink events don't interfere with IPv6 connection activation
  - ifcfg-rh: fix writing out LEAP connections
  - ifcfg-rh: recognize 'static' as a valid BOOTPROTO (rh #528068)
  - applet: fix "could not find required resources" error (rh #529766)


author: Dan Williams <dcbw@redhat.com> - 0.7.996-7.git20091113
changelog:
  - nm: better pidfile handing (rh #517362)
  - nm: save WiFi and Networking enabled/disabled states across reboot
  - nm: fix crash with missing VPN secrets (rh #532084)
  - applet: fix system connection usage from the "Connect to hidden..." dialog
  - applet: show Bluetooth connections when no other devices are available (rh #532049)
  - applet: don't die when autoconfigured connections can't be made (rh #532680)
  - applet: allow system administrators to disable the "Create new wireless network..." menu item
  - applet: fix missing username connecting to VPNs the second time
  - applet: really fix animation stuttering
  - editor: fix IP config widget tooltips
  - editor: allow unlisted countries in the mobile broadband wizard (rh #530981)
  - ifcfg-rh: ignore .rpmnew files (rh #509621)


author: Dan Williams <dcbw@redhat.com> - 0.7.997-1
changelog:
  - core: remove haldaemon from initscript dependencies (rh #542078)
  - core: handle PEM certificates without an ending newline (rh #507315)
  - core: fix rfkill reporting for ipw2x00 devices
  - core: increase PPPoE timeout to 30 seconds
  - core: fix re-activating system connections with secrets
  - core: fix crash when deleting automatically created wired connections
  - core: ensure that a VPN's DNS servers are used when sharing the VPN connection
  - ifcfg-rh: support routes files (rh #507307)
  - ifcfg-rh: warn when device will be managed due to missing HWADDR (rh #545003)
  - ifcfg-rh: interpret DEFROUTE as never-default (rh #528281)
  - ifcfg-rh: handle MODE=Auto correctly
  - rpm: fix rpmlint errors
  - applet: don't crash on various D-Bus and other errors (rh #545011) (rh #542617)
  - editor: fix various PolicyKit-related crashes (rh #462944)
  - applet+editor: notify user that private keys must be protected


author: Dan Williams <dcbw@redhat.com> - 0.7.997-2.git20091214
changelog:
  - core: fix recognition of standalone 802.1x private keys
  - applet: clean notification text to ensure it passes libnotify validation


author: Dan Williams <dcbw@redhat.com> - 0.7.998-1.git20100106
changelog:
  - build: fix for new pppd (rh #548520)
  - core: add WWAN enable/disable functionality
  - ifcfg-rh: IPv6 addressing and routes support (rh #523288)
  - ifcfg-rh: ensure connection is updated when route/key files change
  - applet: fix crash when active AP isn't found (rh #546901)
  - editor: fix crash when editing connections (rh #549579)


author: Dan Williams <dcbw@redhat.com> - 0.7.999-1.git20100120
changelog:
  - core: support for managed-mode DHCPv6 (rh #429710)
  - ifcfg-rh: gracefully handle missing PREFIX/NETMASK
  - cli: initial preview of command-line client
  - applet: add --help to explain what the applet is (rh #494641)


author: Dan Williams <dcbw@redhat.com> - 0.8-0.2.git20100129
changelog:
  - core: add Bluetooth Dial-Up Networking (DUN) support (rh #136663)
  - core: start DHCPv6 on receipt of RA 'otherconf'/'managed' bits
  - nmcli: allow enable/disable of WiFi and WWAN


author: Kevin Kofler <Kevin@tigcc.ticalc.org> - 0.8-0.3.git20100129
changelog:
  - core: validate the autostart .desktop file
  - build: fix nmcli for the stricter ld (fixes FTBFS)
  - build: fix nm-connection-editor for the stricter ld (fixes FTBFS)
  - applet: don't autostart in KDE on F13+ (#541353)


author: Dan Williams <dcbw@redhat.com> - 0.8-0.4.git20100211
changelog:
  - core: fix mobile broadband PIN handling (rh #543088) (rh #560742)
  - core: better handling of /etc/hosts if hostname was already added by the user
  - applet: crash less on D-Bus property errors (rh #557007)
  - applet: fix crash entering wired 802.1x connection details (rh #556763)


author: Dan Williams <dcbw@redhat.com> - 0.8-1.git20100219
changelog:
  - core: update to final 0.8 release
  - core: fix Bluetooth DUN connections when secrets are needed
  - ifcfg-rh: add helper for initscripts to determine ifcfg connection UUIDs
  - applet: fix Bluetooth connection secrets requests
  - applet: fix rare conflict with other gnome-bluetooth plugins


author: Dan Williams <dcbw@redhat.com> - 0.8-2.git20100317
changelog:
  - man: many manpage updates
  - core: determine classful prefix if non is given via DHCP
  - core: ensure /etc/hosts is always up-to-date and correct (rh #569914)
  - core: support GSM network and roaming preferences
  - applet: startup speed enhancements
  - applet: better support for OTP/token-based WiFi connections (rh #526383)
  - applet: show GSM and CDMA registration status and signal strength when available
  - applet: fix zombie GSM and CDMA devices in the menu
  - applet: remove 4-character GSM PIN/PUK code limit
  - applet: fix insensitive WiFi Create... button (rh #541163)
  - applet: allow unlocking of mobile devices immediately when plugged in


author: Dan Williams <dcbw@redhat.com> - 0.8-3.git20100323
changelog:
  - core: don't exit early on non-fatal state file errors
  - core: fix Bluetooth connection issues (rh #572340)
  - applet: fix some translations (rh #576056)
  - applet: better feedback when wrong PIN/PUK is entered
  - applet: many updated translations
  - applet: PIN2 unlock not required for normal modem functionality
  - applet: fix wireless secrets dialog display


author: Dan Williams <dcbw@redhat.com> - 0.8-5.git20100408
changelog:
  - core: more flexible logging
  - core: fix crash with OLPC mesh devices after suspend
  - applet: updated translations
  - applet: show mobile broadband signal strength and technology in the icon
  - applet: fix continuous password requests for 802.1x connections (rh #576925)
  - applet: many updated translations


author: Dan Williams <dcbw@redhat.com> - 0.8-7.git20100422
changelog:
  - core: fix crash during install (rh #581794)
  - wifi: fix crash when supplicant segfaults after resume (rh #538717)
  - ifcfg-rh: fix MTU handling for wired connections (rh #569319)
  - applet: fix display of disabled mobile broadband devices


author: Dan Williams <dcbw@redhat.com> - 0.8-8.git20100426
changelog:
  - core: fix issues with IPv6 router advertisement mishandling (rh #530670)
  - core: many fixes for IPv6 RA and DHCP handling (rh #538499)
  - core: ignore WWAN ethernet devices until usable (rh #585214)
  - ifcfg-rh: fix handling of WEP passphrases (rh #581718)
  - applet: fix crashes (rh #582938) (rh #582428)
  - applet: fix crash with multiple concurrent authorization requests (rh #585405)
  - editor: allow disabling IPv4 on a per-connection basis
  - editor: add support for IPv6 DHCP-only configurations


author: Dan Williams <dcbw@redhat.com> - 0.8-10.git20100502
changelog:
  - core: IPv6 autoconf, DHCP, link-local, and manual mode fixes
  - editor: fix saving IPv6 address in user connections


author: Dan Williams <dcbw@redhat.com> - 0.8-11.git20100503
changelog:
  - core: allow IP configuration as long as one method completes (rh #567978)
  - core: don't prematurely remove IPv6 RDNSS nameservers (rh #588192)
  - core: ensure router advertisements are only used when needed (rh #588613)
  - editor: add IPv6 gateway editing capability


author: Dan Williams <dcbw@redhat.com> - 0.8-12.git20100504
changelog:
  - core: treat missing IPv6 configuration as ignored (rh #588814)
  - core: don't flush IPv6 link-local routes (rh #587836)
  - cli: update output formatting


author: Dan Williams <dcbw@redhat.com> - 0.8-13.git20100509
changelog:
  - core: restore initial accept_ra value for IPv6 ignored connections (rh #588619)
  - bluetooth: fix bad timeout on PAN connections (rh #586961)
  - applet: updated translations


author: Dan Williams <dcbw@redhat.com> - 0.8.1-0.1.git20100510
changelog:
  - core: fix handling of IPv6 RA flags when router goes away (rh #588560)
  - bluetooth: fix crash configuring DUN connections from the wizard (rh #590666)


author: Dan Williams <dcbw@redhat.com> - 0.8.1-0.2.git20100519
changelog:
  - core: use GIO in local mode only (rh #588745)
  - core: updated translations (rh #589230)
  - core: be more lenient in IPv6 RDNSS server expiry (rh #590202)
  - core: fix headers to be C++ compatible (rh #592783)
  - applet: updated translations (rh #589230)
  - applet: lock connections with well-known SSIDs to their specific AP


author: Dan Williams <dcbw@redhat.com> - 0.8.1-0.3
changelog:
  - core: fix nm-online crash (rh #593677)
  - core: fix failed suspend disables network (rh #589108)
  - core: print out missing firmware errors (rh #594578)
  - applet: fix device descriptions for some mobile broadband devices
  - keyfile: bluetooth fixes
  - applet: updated translations (rh #589230)


author: Dan Williams <dcbw@redhat.com> - 0.8.1-0.4
changelog:
  - Update to 0.8.1 release candidate
  - core: fix WWAN hardware enable state tracking (rh #591622)
  - core: fix Red Hat initscript return value on double-start (rh #584321)
  - core: add multicast route entry for IPv4 link-local connections
  - core: fix connection sharing in cases where a dnsmasq config file exists
  - core: fix handling of Ad-Hoc wifi connections to indicate correct network
  - core: ensure VPN interface name is passed to dispatcher when VPN goes down
  - ifcfg-rh: fix handling of ASCII WEP keys
  - ifcfg-rh: fix double-quoting of some SSIDs (rh #606518)
  - applet: ensure deleted connections are actually forgotten (rh #618973)
  - applet: don't crash if the AP's BSSID isn't availabe (rh #603236)
  - editor: don't crash on PolicyKit events after windows are closed (rh #572466)


author: Dan Williams <dcbw@redhat.com> - 0.8.1-1
changelog:
  - core: read nm-system-settings.conf before NetworkManager.conf (rh #606160)
  - core: fix editing system DSL connections when using keyfile plugin
  - core: work around inconsistent proprietary driver associated AP reporting
  - core: ensure empty VPN secrets are not used (rh #587784)
  - core: don't request WiFi scans when connection is locked to a specific BSSID
  - cli: show IPv6 settings and configuration
  - applet: updated translations
  - editor: fix a PolicyKit-related crash editing connections (rh #603566)
  - applet: fix saving the ignore-missing-CA-cert preference (rh #610084)
  - editor: fix listing connections on PPC64 (rh #608663)
  - editor: ensure editor windows are destroyed when closed (rh #572466)


author: Dan Williams <dcbw@redhat.com> - 0.8.1-2
changelog:
  - core: quiet annoying warnings (rh #612991)
  - core: fix retrieval of various IP options in libnm-glib (rh #611141)
  - core: ship NetworkManager.conf instead of deprecated nm-system-settings.conf (rh #606160)
  - core: add short hostname to /etc/hosts too (rh #621910)
  - core: recheck autoactivation when new system connections appear
  - core: enable DHCPv6-only configurations (rh #612445)
  - core: don't fail connection immediately if DHCP lease expires (rh #616084) (rh #590874)
  - core: fix editing of PPPoE system connections
  - core: work around twitchy frequency reporting of various wifi drivers
  - core: don't tear down user connections on console changes (rh #614556)
  - cli: wait a bit for NM's permissions check to complete (rh #614866)
  - ifcfg-rh: ignore BRIDGE and VLAN configs and treat as unmanaged (rh #619863)
  - man: add manpage for nm-online
  - applet: fix crash saving ignore-missing-CA-cert preference (rh #619775)
  - applet: hide PIN/PUK by default in the mobile PIN/PUK dialog (rh #615085)
  - applet: ensure Enter closes the PIN/PUK dialog (rh #611831)
  - applet: fix another crash in ignore-CA-certificate handling (rh #557495)
  - editor: fix handling of Wired/s390 connections (rh #618620)
  - editor: fix crash when canceling editing in IP address pages (rh #610891)
  - editor: fix handling of s390-specific options
  - editor: really fix crash when changing system connections (rh #603566)


author: Dan Williams <dcbw@redhat.com> - 0.8.1-6
changelog:
  - core: add dispatcher events on DHCPv4 and DHCPv6 lease changes
  - core: enforce access permissions when enabling/disabling WiFi and WWAN (rh #626337)
  - core: listen for UPower suspend/resume signals
  - applet: fix disabled Enable Networking and Enable Wireless menu items (rh #627365)
  - applet: updated translations
  - applet: obscure Mobile Broadband PIN in secondary unlock dialog


author: Dan Williams <dcbw@redhat.com> - 0.8.1-9
changelog:
  - core: fix suspend/resume regression (rh #638640)
  - core: fix issue causing some nmcli requests to be ignored


author: Dan Williams <dcbw@redhat.com> - 0.8.995-1.git20110308
changelog:
  - Update to NetworkManager 0.9-beta1
  - core: consolidate user and system settings services into NM itself
  - core: add WiMAX support
  - applet: support Fast User Switching


author: Dan Williams <dcbw@redhat.com> - 0.8.997-1
changelog:
  - Update to 0.8.997 (0.9-beta3)
  - ifcfg-rh: fix reading and writing of Dynamic WEP connections using LEAP as the eap method
  - wifi: fix signal strength for scanned access points with some drivers
  - applet: translation updates


author: Dan Williams <dcbw@redhat.com> - 0.8.997-4.git20110325
changelog:
  - core: fix possible libnm-glib crash when activating connections
  - applet: fix various naming and dialog title issues


author: Dan Williams <dcbw@redhat.com> - 0.8.997-5.git20110328
changelog:
  - core: fix connection deactivation on the compat interface
  - core: give default wired connections a more friendly name
  - core: fix base type of newly created wired connections
  - applet: many updated translations


author: Dan Williams <dcbw@redhat.com> - 0.8.997-7.git20110330
changelog:
  - core: fix creation of default wired connections
  - core: fix requesting new secrets when old ones fail (ex changing WEP keys)
  - editor: ensure all pages are sensitive after retrieving secrets
  - editor: fix crash when scrolling through connection lists (rh #693446)
  - applet: fix crash after using the wifi or wired secrets dialogs (rh #693446)


author: Dan Williams <dcbw@redhat.com> - 0.8.997-8.git20110331
changelog:
  - core: resurrect default VPN username
  - core: don't stomp on crypto library users by de-initing the crypto library


author: Dan Williams <dcbw@redhat.com> - 0.8.998-1
changelog:
  - Update to 0.8.998 (0.9.0-rc1)
  - core: fix near-infinite requests for passwords (rh #692783)
  - core: fix handling of wired 802.1x connections
  - core: ignore Nokia PC-Suite ethernet devices we can't use yet
  - applet: migrate 0.8 OpenVPN passwords to 0.9 formats


author: Dan Williams <dcbw@redhat.com> - 0.8.998-3.git20110419
changelog:
  - core: systemd and startup enhancements for NFS mounts
  - core: more efficient startup process
  - core: fix handling of multiple logins when one is inactive
  - core: fix handling of S390/Hercules CTC network interfaces (rh #641986)
  - core: support Easytether interfaces for Android phones
  - core: fix handling of WWAN enable/disable states
  - ifcfg-rh: harmonize handling if IPADDR/PREFIX/NETMASK with initscripts (rh #658907)
  - applet: fix connection to WPA Enterprise networks (rh #694765)


author: Dan Williams <dcbw@redhat.com> - 0.8.998-4.git20110427
changelog:
  - core: enable optimized background roaming for WPA Enterprise configs
  - core: better handling of WiFi and WiMAX rfkill (rh #599002)
  - applet: fix crash detecting Bluetooth DUN devices a second time
  - ifcfg-rh: fix managed/unmanaged changes when removing connections (rh #698202)


author: Dan Williams <dcbw@redhat.com> - 0.8.999-1
changelog:
  - core: ensure DER format certificates are correctly recognized (rh #699591)
  - core: fix WINS server handling in client helper libraries
  - core: enhance dispatcher script environment to include IPv6 and VPN details
  - applet: migrate openswan connections to 0.9
  - editor: improve usability of editing IP addresses (rh #698199)


author: Dan Williams <dcbw@redhat.com> - 0.8.999-2.git20110509
changelog:
  - core: fix possible crash when connections are deleted
  - core: fix exported symbols in libnm-util and libnm-glib
  - core/applet: updated translations


author: Dan Williams <dcbw@redhat.com> - 0.8.999-3.git20110526
changelog:
  - compat: fix activation/deactivation of VPN connections (rh #699786)
  - core: fix autodetection of previously-used hidden wifi networks
  - core: silence error if ConsoleKit database does not yet exist (rh #695617)
  - core: fix Ad-Hoc frequency handling (rh #699203)
  - core: fixes for migrated OpenConnect VPN plugin connections
  - core: various fixes for VPN connection secrets handling
  - core: send only short hostname to DHCP servers (rh #694758)
  - core: better handling of PKCS#8 private keys
  - core: fix dispatcher script interface name handling
  - editor: fix potential crash when connection is invalid (rh #704848)
  - editor: allow _ as a valid character for GSM APNs


author: Dan Williams <dcbw@redhat.com> - 0.8.9997-1.git20110531
changelog:
  - editor: fix resizing of UI elements (rh #707269)
  - core: retry wired connections when cable is replugged
  - core: fix a few warnings and remove some left-over debugging code


author: Dan Williams <dcbw@redhat.com> - 0.8.9997-3.git20110613
changelog:
  - keyfile: better handling of missing certificates/private keys
  - core: fix issues handling "always-ask" wired and WiFi 802.1x connections (rh #703785)
  - core: fix automatic handling of hidden WiFi networks (rh #707406)
  - editor: fix possible crash after reading network connections (rh #706906)
  - editor: make Enter/Return key close WiFi password dialogs (rh #708666)


author: Dan Williams <dcbw@redhat.com> - 0.8.9997-4.git20110620
changelog:
  - core: don't cache "(none)" hostname at startup (rh #706094)
  - core: fix handling of VPN connections with only system-owned secrets
  - core: fix optional waiting for networking at startup behavior (rh #710502)
  - ifcfg-rh: fix possible crashes in error cases
  - ifcfg-rh: fix various IPv4 and IPv6 handling issues
  - applet: add notifications of GSM mobile broadband registration status
  - editor: move secrets when making connections available to all users or private
  - applet: don't show irrelevant options when asking for passwords


author: Dan Williams <dcbw@redhat.com> - 0.8.9997-5.git20110702
changelog:
  - core: ensure users are authorized for shared wifi connections (CVE-2011-2176) (rh #715492)
  - core: retry failed connections after 5 minute timeout
  - core: immediately request new 802.1x 'always ask' passwords if they fail
  - core: add MAC blacklisting capability for WiFi and Wired connections
  - core: retry failed connections when new users log in (rh #706204)
  - applet: updated translations
  - core: drop compat interface now that KDE bits are updated to NM 0.9 API


author: Dan Williams <dcbw@redhat.com> - 0.8.9997-6.git20110721
changelog:
  - core: updated Russian translation (rh #652904)
  - core: fix possible crash if secrets are missing
  - core: append interface name for IPv6 link-local DNS server addresses (rh #720001)
  - core: fix setting hostname from DHCP options (rh #719100)
  - libnm-util: GObject introspection annotation fixes
  - libnm-util: ensure IP address/route prefixes are valid
  - ifcfg-rh: read anonymous identity for 802.1x PEAP connections (rh #708436)
  - applet: show notifications on CDMA home/roaming changes
  - applet: fix various issues saving VPN secrets
  - editor: allow exporting VPN secrets
  - editor: default to IPv6 "automatic" addressing mode


author: Dan Williams <dcbw@redhat.com> - 0.9.0-1
changelog:
  - Update to 0.9 release
  - core: fix issue where scan results could be ignored
  - core: ensure agent secrets are preserved when updating connections
  - core: don't autoconnect disabled modems
  - core: fix race when checking modem enabled/disabled status after disabling
  - core: ensure newly installed VPN plugins can actually talk to NM
  - core: add support for 802.1X certificate subject matching
  - libnm-glib: various introspection fixes
  - applet/editor: updated translations


author: Dan Williams <dcbw@redhat.com> - 0.9.1.90-1
changelog:
  - Update to 0.9.1.90 (0.9.2-beta1)
  - core: fix IPv6 link-local DNS servers in the dnsmasq DNS plugin
  - cli: add ability to delete connections
  - keyfile: fix an issue with duplicated keyfile connections
  - core: ensure the 'novj' option is passed through to pppd
  - core: store timestamps for VPN connections too (rh #725353)


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.1.90-2.git20110927
changelog:
  - core: ifcfg-rh: remove newlines when writing to ifcfg files (CVE-2011-3364) (rh #737338)
  - core: change iscsiadm path to /sbin/iscsiadm in ifcfg-rh plugin (rh #740753)
  - core: fix refcounting when deleting a default wired connection (lp:797868)


author: Adam Williamson <awilliam@redhat.com> - 1:0.9.1.90-5.git20110927
changelog:
  - Rebuilt for glibc (rh #747377)
  - core: fix setting hostname from DHCP options (rh #719100)
  - skip a release to keep up with F16


author: Dan Williams <dcbw@redhat.com> - 0.9.2-1
changelog:
  - core: fix possible crash when talking to ModemManager
  - core: improve handling of rfkill on some machines (eeepc 1005HA and others)
  - ifcfg-rh: don't use spaces in ifcfg file names (rh #742273)
  - core: accept IPv6 Router Advertisements when forwarding is on
  - core: bump dnsmasq cache size to 400 entries
  - core: ensure IPv6 static routes are flushed when device is deactivated
  - ifcfg-rh: fix changing WPA connections to WEP
  - core: fix setting hostname from DHCP (rh #719100)
  - libnm-glib: fix various GObject introspection issues (rh #747302)
  - core: don't change routing or DNS if no devices are managed
  - core: ensure IPv6 RA-provided routes are honored


author: Dan Williams <dcbw@redhat.com> - 0.9.3-0.1
changelog:
  - Update to 0.9.4 snapshot
  - wimax: enable optional support for Intel WiMAX devices
  - core: use nl80211 for WiFi device control
  - core: add basic support for Infiniband IP interfaces
  - core: add basic support for bonded interfaces
  - core: in-process IP configuration no longer blocks connected state


author: Dan Williams <dcbw@redhat.com> - 0.9.3.995-0.4
changelog:
  - Update to 0.9.3.995 (0.9.4-beta1)
  - core: add support for bonding and VLAN interfaces
  - core: add support for Internet connectivity detection
  - core: add support for IPv6 Privacy Extensions
  - core: fix interaction with firewalld restarts


author: Dan Williams <dcbw@redhat.com> - 0.9.3.995-0.5
changelog:
  - core: fix a crash with ipw2200 devices and adhoc networks
  - core: fix IPv6 addressing on newer kernels
  - core: fix issue with VPN plugin passwords (rh #802540)
  - cli: enhancements for Bonding, VLAN, and OLPC mesh devices
  - ifcfg-rh: fix quoting WPA passphrases that include quotes (rh #798102)
  - libnm-glib: fix some issues with duplicate devices shown in menus


author: Dan Williams <dcbw@redhat.com> - 0.9.3.995-0.6
changelog:
  - core: fix issue with carrier changes not being recognized (rh #800690)
  - editor: warn user if CA certificate is left blank


author: Dan Williams <dcbw@redhat.com> - 0.9.3.997-0.7
changelog:
  - Update to 0.9.3.997 (0.9.4-rc1)
  - core: fix possible WiFi hang when connecting to Ad-Hoc networks
  - core: enhanced IPv6 compatibility
  - core: proxy DNSSEC data when using the 'dnsmasq' caching nameserver plugin
  - core: allow VPNs to specify multiple domain names given by the server
  - core: fix an issue creating new InfiniBand connections
  - core/applet/editor: disable WiFi Ad-Hoc WPA connections until kernel bugs are fixed


author: Dan Williams <dcbw@redhat.com> - 0.9.3.997-1
changelog:
  - applet: move to network-manager-applet RPM
  - editor: move to nm-connection-editor RPM
  - libnm-gtk: move to libnm-gtk RPM


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.5.95-1.git20120713
changelog:
  - Update to 0.9.5.95 (0.9.6-rc1) snapshot
  - core: add autoconnect, driver-versioni and firmware-version properties to NMDevice
  - core: various IPv6 improvements
  - core: reduce number of changes made to DNS information during connection setup
  - core: add Vala language bindings
  - vpn: support IPv6 over VPNs
  - wifi: add on-demand WiFi scan support


author: Dan Williams <dcbw@redhat.com> - 0.9.5.96-1
changelog:
  - Update to 0.9.6-rc2
  - core: fix race between parallel DHCP client invocations
  - core: suppress a useless warning (rh #840580)
  - ifcfg-rh: fix segfault with malformed values (rh #841391)
  - ifcfg-rh: ignore IP config on bond slave configurations (rh #838907)


author: Dan Williams <dcbw@redhat.com> - 0.9.7.0-3.git20121004
changelog:
  - Forward-port some forgotten fixes from F17
  - Fix networked-filesystem systemd dependencies (rh #787314)
  - Don't restart NM on upgrade, don't stop NM on uninstall (rh #811200)


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.7.0-8.git20121004
changelog:
  - Apply patch from master to update hostname (rh #875085)
  - spec: create /etc/NetworkManager/dnsmasq.d (rh #873621)


author: Dan Williams <dcbw@redhat.com> - 0.9.7.997-1
changelog:
  - Update to 0.9.8-beta2
  - core: ignore bridges managed by other tools (rh #905035)
  - core: fix libnl assert (rh #894653)
  - wifi: always use Proactive Key Caching with WPA Enterprise (rh #834444)
  - core: don't crash when Internet connection sharing fails to start (rh #883142)


author: Dan Williams <dcbw@redhat.com> - 0.9.8.1-1.git20130327
changelog:
  - Update to 0.9.8.2 snapshot
  - core: fix VLAN parent handling when identified by UUID
  - core: quiet warning about invalid interface index (rh #920145)
  - core: request 'static-routes' from DHCP servers (rh #922558)
  - core: fix crash when dbus-daemon is restarted (rh #918273)
  - core: copy leasefiles from /var/lib/dhclient to fix netboot (rh #916233)
  - core: memory leak and potential crash fixes
  - ifcfg-rh: ensure missing STP property is interpreted as off (rh #922702)


author: Dan Williams <dcbw@redhat.com> - 0.9.8.1-2.git20130507
changelog:
  - core: fix issue with UI not showing disconnected on rfkill
  - core: memory leak fixes
  - core: silence warning about failure reading permanent MAC address (rh #907912)
  - core: wait up to 120s for slow-connecting modems
  - core: don't crash on PPPoE connections without a wired setting
  - core: ensure the AvailableConnections property is always correct
  - keyfile: ensure all-default VLAN connections are read correctly
  - core: suppress kernel's automatic creation of bond0 (rh #953466)
  - libnm-glib: make NMSecretAgent usable with GObject Introspection
  - libnm-util: fix GObject Introspection annotations of nm_connection_need_secrets()
  - core: documentation updates


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-1.git20130514
changelog:
  - Enable hardened build
  - Update to 0.9.10 snapshot
  - cli: new capabilities and somewhat re-arranged syntax
  - core: generic interface support
  - core: split config support; new "server mode" options
  - core: allow locking connections to interface names


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-2.git20130515
changelog:
  - Update for systemd network-online.target (rh #787314)
  - Add system service for the script dispatcher (rh #948433)


author: Dan Winship <danw@redhat.com> - 0.9.9.0-6
changelog:
  - Belatedly update udev directory for UsrMove
  - Fix incorrect dates in old changelog entries to avoid rpm warnings


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-9.git20130807
changelog:
  - core: fix assert on multi-hop routes (rh #989022)
  - core: fix dispatcher systemd unit enabling (rh #948433)
  - ifcfg-rh: ignore emacs temporary lockfiles (rh #987629)
  - core: fix various routing issues and interaction with kernel events
  - cli: confirm saving connections when autoconnect is enabled (rh #953296)
  - cli: automatically change method when static IP addresses are added
  - core: preserve externally added IPv4 routes and addresses


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-10.git20130906
changelog:
  - core: fix bug which disallowed deleting connections (rh #997568)
  - core: add support for Team devices
  - core: enable NetworkManager-wait-online by default (rh #816655)
  - core: fix crash when 'gre' and 'macvlan' links change (rh #997396)
  - core: fail activation when invalid static routes are configured (rh #999544)
  - core: enhance connectivity checking to include portal detection
  - core: allow hyphens for MAC addresses (rh #1002553)
  - core: remove NetworkManager-created software devices when they are deactivated (rh #953300)
  - core: fix handling of some DHCP client identifiers (rh #999503)
  - core: correctly handle Open vSwitch interfaces as generic interfaces (rh #1004356)
  - core: better handle Layer-2-only connections (rh #979288)
  - cli: enhanced bash completion
  - cli: make the 'describe' command more visible (rh #998002)
  - cli: fix bug rejecting changes to Wi-Fi channels (rh #999999)
  - cli: update bash completion to suggest connection names (rh #997997)
  - cli: fix tab completion for aliases in edit mode
  - cli: ask whether to switch IP method to 'auto' when all addresses are deleted (rh #998137)
  - cli: request missing information when --ask is passed (rh #953291)
  - cli: add 'remove' command to edit mode
  - cli: fix creation of secure Wi-Fi connections (rh #997969) (rh #997555)
  - cli: default autoconnect to no and ask whether to activate on save (rh #953296)
  - man: clarify manpage text (rh #960071) (rh #953299)
  - man: fix errors in the nmcli help output and manpage (rh #997566)
  - ifcfg-rh: only write IPV6_DEFAULTGW when there's actually a default gateway (rh #997759)
  - ifcfg-rh: fix handling of legacy-format routes file with missing gateway


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-11.git20130913
changelog:
  - core: actually enable ModemManager 1.0 support
  - libnm-glib: fix nm_remote_connection_delete() not calling callback (rh #997568)
  - cli: ensure terminal is reset after quitting
  - cli: set wep-key-type properly when editing (rh #1003945)
  - man: fix typo in nmcli examples manpage (rh #1004117)
  - core: fix setting VLAN ingress/egress mappings
  - core: allow creating VLANs from interfaces other than Ethernet (rh #1003180)
  - cli: fix input/output format conversion (rh #998929)


author: Dan Winship <danw@redhat.com> - 0.9.9.0-13.git20131001
changelog:
  - core: fix bridge device creation (#1012532)
  - core,settings: do not call functions with connection==NULL (rh #1008151)
  - cli: accept gateway in the IP questionnaire of 'nmcli -a con add' (rh #1007368)
  - cli: always print success message (not only in --pretty mode) (rh #1006444)
  - cli: fix bond questionnaire to be able to set miimon (rh #1007355)
  - ifcfg-rh: if IPv4 is disabled put DNS domains (DOMAIN) into IPv6 (rh #1004866)
  - platform: fix a crash when nm_platform_sysctl_get() returns NULL (rh #1010522)
  - platform: fix InfiniBand partition handling (rh #1008568)
  - infiniband: only check the last 8 bytes when doing hwaddr matches (rh #1008566)
  - bluez: merge adding support for BlueZ 5 (bgo #701078)
  - api: clarify lifetime and behavior of ActiveConnection's SpecificObject property (rh #1012309)
  - vpn: fix connecting to VPN (bgo #708255) (rh #1014716)
  - rdisc: do not crash on NDP init failures (rh #1012151)
  - cli: be more verbose when adding IP addresses in questionnaire (rh #1006450)
  - team: chain up parent dispose() in NMDeviceTeam dispose() (rh #1013593)
  - translation updates


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-14.git20131003
changelog:
  - core: fix DHCPv6 address prefix length (rh #1013583)
  - cli: enhance bonding questionaire (rh #1007355)
  - core: fix crash with Bluez5 if PAN connection is not defined (rh #1014770)
  - libnm-glib: fix various memory leaks that could cause UIs to mis-report state
  - core: fix issues with mis-configured IPv6 router advertisements (rh #1008104)
  - cli: fix potential crash editing connections (rh #1011942)


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.9.0-15.git20131003
changelog:
  - ifcfg-rh: fix crash in ifcfg-rh plugin when reloading connections (rh #1023571)
  - ifcfg-rh: fix crash when having connections with NEVER_DEFAULT (rh #1021112)
  - core: fix segfault in nm-policy when setting default route for vpn (rh #1019021)
  - ifcfg-rh: fix crash when reading connection (assert) (rh #1025007)
  - core: allow IPv4 to proceed if IPv6 is globally disabled but set to "auto" (rh #1012151)


author: Dan Winship <danw@redhat.com> - 0.9.9.0-18.git20131003
changelog:
  - nmcli: add "con load" to manually load an ifcfg file
  - vpn: fix logging to help debug rh #1018317
  - bridge: fix crash with bridge ports with empty settings (rh #1031170)


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.9.0-19.git20131003
changelog:
  - dispatcher: fix crash on exit while logging from signal handler (rh #1017884)
  - core: workaround crash when connecting to wifi (rh #1025371)
  - ethernet: don't crash if device doesn't have a MAC address (rh #1029053)
  - libnm-glib: fix crash by taking additional ref in result_cb() (rh #1030403)
  - ifcfg-rh: fix ignoring updates that don't change anything


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-21.git20131003
changelog:
  - core: wait for link before declaring startup complete (rh #1034921)
  - core: ignore RA-provided IPv6 default routes (rh #1029213)
  - core: set IPv4 broadcast address correctly (rh #1032819)


author: Thomas Haller <thaller@redhat.com> - 0.9.9.0-28.git20140131
changelog:
  - add nmtui package
  - bugfix caching of libnl objects (caused error with new libnl3 version when activating bridges) (rh #1063290)
  - fix NMManager:startup tracking (pending action) (rh #1030583)


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.9.1-2.git20140314
changelog:
  - Update to a git snapshot (git20140314 git:45a326d)
  - Fix Obsoletes and Requires to perform updates correctly


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.9.1-3.git20140317
changelog:
  - Update to a git snapshot (git20140317 git:a1e89b4)
  - platform: fix NM crash if link has no name (e.g. for failed VPN connection)
  - libnm-util/cli: fix bridge priority default value (rh #1073664)


author: Dan Winship <danw@redhat.com> - 0.9.9.1-4.git20140319
changelog:
  - Update to a git snapshot (git20140319 git:3980806)
  - Rename NetworkManager-atm package to NetworkManager-adsl
  - Rename NetworkManager-bt package to NetworkManager-bluetooth


author: Jiří Klimeš <jklimes@redhat.com> - 1:0.9.10.0-14.git20140704
changelog:
  - vpn: propagate daemon exec error correctly (bgo #739436)
  - core: do not assert when a device is enslaved externally (rh #1167345)


author: Dan Winship <danw@redhat.com> - 1:1.0.0-2
changelog:
  - build: fix NetworkManager-bluetooth dep on NetworkManager-wwan
  - build: re-enable hardware plugins on s390


author: Jiří Klimeš <jklimes@redhat.com> - 1:1.0.4-0.2.git20150707.cf15f2a
changelog:
  - Update to a new 1.0.3 development snapshot (git20150707)
  - core: fix handling of ignore-auto-* properties (rh #1239184)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.0.4-2
changelog:
  - Fix an assertion failure in nmcli (rh #1244048)
  - Fix default route handling on assumed connections (rh #1245648)


author: Thomas Haller <thaller@redhat.com> - 1:1.0.6-0.2.20150813git7e2caa2
changelog:
  - fix crash when deactivating assumed device (rh #1253949)
  - backport wifi scan options for ssid
  - use plain HTTP URI for connectivity check


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.2.0-0.3.20151023gite01c175
changelog:
  - Drop the NetworkManager-devel subpackage (folded into libnm-glib-devel)
  - Update to a later snapshot


author: Thomas Haller <thaller@redhat.com> - 1:1.2.0-0.6.beta1
changelog:
  - specfile: remove no longer needed 10-ibft-plugin.conf and sync with contrib/rpm
  - core: backport fix for missing braces bug in platform


author: Thomas Haller <thaller@redhat.com> - 1:1.2.2-2
changelog:
  - dns: clear cache of dnsmasq when updating DNS configuration (rh#1338731)
  - dns: fix restarting dnsmasq instance
  - spec: depend bluetooth subpackage on exact wwan version
  - all: fix some memleaks


author: Thomas Haller <thaller@redhat.com> - 1:1.4.0-4
changelog:
  - wifi: fix another activation failure when changing MAC address (rh#1371478, bgo#770456, bgo#770504)


author: Thomas Haller <thaller@redhat.com> - 1:1.5.2-2
changelog:
  - fix enabling ifcfg-rh plugin by default (rh#1397938)
  - move translation files from core to libnm/glib subpackages


author: Thomas Haller <thaller@redhat.com> - 1:1.5.2-3
changelog:
  - fix enabling ifcfg-rh plugin by default for +=/-= operations (rh#1397938)
  - fix missing symbol _nm_device_factory_no_default_settings


author: Thomas Haller <thaller@redhat.com> - 1:1.6-0.2.rc1
changelog:
  - Update with fixes from upstream nm-1-6 branch
  - build: let libnm and glib package conflict (rh #1406454)


author: Thomas Haller <thaller@redhat.com> - 1:1.8.0-2
changelog:
  - dhcp: don't add route to DHCP4 server (rh #1448987)
  - device: update external configuration before commit (rh #1449873)
  - libnm: fix NUL termination of device's description (rh #1443114)
  - libnm, core: ensure valid UTF-8 in device properties (rh #1443114)
  - core: fix device's UDI property on D-Bus (rh #1443114)
  - ifcfg-rh: omit empty next hop for routes in legacy format (rh #1452648)
  - core: fix persisting managed state of device (rh #1440171)
  - proxy: fix use-after-free (rh #1450459)
  - device: don't wrongly delay startup complete waiting for carrier (rh #1450444)


author: Thomas Haller <thaller@redhat.com> - 1:1.8.0-4
changelog:
  - ifcfg-rh: fix writing legacy NETMASK value (rh #1445414)
  - tui: fix crash during connect (rh #1456826)
  - libnm: fix libnm rejecting VLAN ID 4095 (rh #1456911)
  - bluetooth: fix crash on connecting to a NAP (rh #1454385)
  - device: release removed devices from master on cleanup (rh #1448907)
  - nmcli: fix crash when setting 802-1x.password-raw (rh #1456362)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.8.0-5
changelog:
  - bond: fix crash comparing mode while generating bond connection (rh #1459580)
  - connectivity: fix route penalty if WWAN and BT device using ip-ifindex (rh #1459932)
  - device: persist nm-owned in run state (rh #1376199)
  - device: fix assuming master device on restart (rh #1452062)
  - device: apply route metric penality only when the default route exists (rh #1459604)
  - connectivity: fix periodic connectivity check (rh #1458399)
  - bond: improve option matching on daemon restart (rh #1457909)
  - device: fix touching device after external activation (rh #1457242)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.8.0-6
changelog:
  - device: don't change MTU unless explicitly configured (rh #1460760)
  - core: don't remove external IPv4 addresses (rh #1459813)
  - cli: fix output of iface in overview output (rh#1460219)
  - ppp: unexport NMPPPManager instance on dispose (rh#1459579)
  - cli: remove spurious device names from wifi subcommands output (rh#1460527)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.8.2-1
changelog:
  - Update to 1.8.2 release
  - dhcp/dhclient: improve "interface" statement parsing
  - dns: fix public suffix check on search domains (rh #1404350)


author: Stephen Gallagher <sgallagh@redhat.com> - 1:1.8.2-2
changelog:
  - NetworkManager-wifi and NetworkManager-glib-devel should require
    NetworkManager, not provide it.


author: Thomas Haller <thaller@redhat.com> - 1:1.8.4-1
changelog:
  - Update to 1.8.4 release
  - don't install NetworkManager-wait-online in network-online.target.wants (rh#1455704)


author: Thomas Haller <thaller@redhat.com> - 1:1.8.4-3
changelog:
  - cli: fix crash in interactive mode for "describe ."
  - libnm/{vpn,remote}-connection: disconnect signal handlers when disposed
  - libnm/manager: disconnect from signals on the proxy when we're disposed


author: Thomas Haller <thaller@redhat.com> - 1:1.8.4-4
changelog:
  - device: fix frozen notify signals on unrealize error path
  - device: fix delay startup complete for unrealized devices
  - keyfile: fix handling routes with metric zero


author: Thomas Haller <thaller@redhat.com> - 1:1.8.4-6
changelog:
  - systemd: let NM-w-o.service require NetworkManager service (rh #1452866)
  - platform: really treat dsa devices as regular wired ethernet (rh #1371289)
  - libnm: fix accessing enabled and metered properties


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.12.0-0.4
changelog:
  - Update to 1.11.4, a development snapshot of NetworkManager 1.12
  - Switch to Python 3-only build root


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.14.0-4
changelog:
  - Don't depend on openvswitch (rh #1629178)
  - device: don't remove routes when the interface is down (rh #1636715)


author: Thomas Haller <thaller@redhat.com> - 1:1.14.0-6
changelog:
  - dhcp: fix out-of-bounds heap write for DHCPv6 with internal plugin (CVE-2018-15688)
  - dhcp: revert letting internal DHCP generate default client-id based on MAC address (rh #1640464)
  - dhcp: support "duid" setting for ipv4.dhcp-client-id
  - dhcp: support "${MAC}" identifier for connection.stable-id
  - dhcp: support dhcp-plugin device spec for matching devices in NetworkManager.conf
  - dhcp: install configuration snippet in config-server package for ipv4.dhcp-client-id=mac (rh #1640494)
  - dns: remove limitation for six DNS search entries (rh #1649704)
  - libnm: fix crash cancelling activation from within callback (rh #1643085)


author: Thomas Haller <thaller@redhat.com> - 1:1.14.0-9
changelog:
  - dhcp: fix default client-id for NetworkManager-config-server (rh #1658057)
  - connectivity: fix crash and portal detection (rh #1658217)
  - core: combine secret-key with machine-id for host identity (rh #1642023)
  - SR-IOV related fixes (rh #1651578, rh #1651576, rh #1651979)
  - core: fix updating agent-owned secrets (rh #1658771)
  - core: no longer set rp_filter sysctl (rh #1651097)
  - device: don't take device down when changing MAC address (rh #1659063)
  - doc: use pregenerated manual pages and gtk-doc from source tarball


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.14.0-10
changelog:
  - ifcfg-rh: fix reading SR-IOV settings
  - dhcp: support client-id and DUID for infiniband (rh #1658057)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.14.0-11
changelog:
  - device: ensure IP configuration is restored when link goes up (rh #1636715)
  - dhcp: fix client-id and DUID for infiniband (rh #1658057)
  - dhcp: change internal DHCP plugin's ipv4.dhcp-client-id setting to "mac" (rh #1661165)


author: Lubomir Rintel <lrintel@redhat.com> - 1:1.20.0-0.1
changelog:
  - Update to a 1.20 snapshot
  - core: fix a possible crash on device removal (rh #1659790)
  - core: fix automatic activation of software deviecs (rh #1667874)
  - team: use strict JSON parsing for configuration (rh #1691619)
  - team: don't kill teamd for external devices (rh #1693142)
  - logging: don't misuse SYSLOG_FACILITY field in journal (rh #1709741)


author: Lubomir Rintel <lrintel@redhat.com> - 1:1.20.0-0.2
changelog:
  - Update to a newer 1.20 snapshot
  - ovs: support dpdk interfaces (rh #1612503)
  - libnm-core: change unsupported modes for arp_ip_targets bond option (rh #1718173)
  - ipv6: add 'disabled' method (rh #1643841)
  - device: fix matching parent device by connection UUID (rh #1716438)
  - cli: fix default value for team.runner-min-ports (rh #1716987)
  - initrd: re-enable the generator (rh #1626348)


author: Thomas Haller <thaller@redhat.com> - 1:1.20.0-0.4
changelog:
  - Update to 1.20-rc1 snapshot
  - settings: support read-only directory for keyfile profiles (rh #1674545)
  - settings: add AddConnection2 D-Bus API to suppress autoconnect (rh #1677068)
  - settings: add no-reapply flat to Update2 D-Bus API (rh #1677070)
  - openvswitch: don't release slaves on quit (rh #1733709)
  - dhcp: expose private options for internal DHCP plugin (rh #1663253)
  - device: fix route table setting when re-activating device (rh #1719318)
  - man: clarify example in nm-openvswitch manual page (rh #1638038)
  - man: various improvements of manual pages (rh #1612554)


author: Thomas Haller <thaller@redhat.com> - 1:1.20.0-1
changelog:
  - Update to 1.20.0 release
  - fix license comments for RPM package (rh #1723395)
  - dhcp: disable experimental nettools DHCP plugin


author: Thomas Haller <thaller@redhat.com> - 1:1.20.0-3
changelog:
  - wifi: detect FT support per device to fix issues with driver support (rh #1743730)
  - doc: fix default values in pre-generated documentation (rh #1737945)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.22.0-0.1
changelog:
  - Update to 1.21.3, a development snapshot of NetworkManager 1.22
  - support configuring default route as a regular, static route (rh #1714438)


author: Thomas Haller <thaller@redhat.com> - 1:1.22.0-0.2
changelog:
  - Update to 1.22-rc1 (1.21.90)
  - large internal rework of libnm's NMClient
  - dhcp: switch implementation of "internal" DHCP to nettools' n-dhcp4
  - add support for carrier state of devices on D-Bus/libnm (rh #1722024)
  - cloud-setup: add initial and experimental tool for configuring in cloud (rh #1642461)
  - dhcp: support configuring FQDN hostname flags (rh #1649368)


author: Thomas Haller <thaller@redhat.com> - 1:1.22.2-1
changelog:
  - Update to 1.22.2
  - core,libnm: expose capability for OVS support (rh #1785147)
  - dhcp: various bugfixes for nettools n-dhcp4 plugin


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.22.4-1
changelog:
  - Update to 1.22.4
  - dhcp: fix behavior of internal DHCP client when the server sends a NAK (rh #1787219)


author: Antonio Cardace <acardace@redhat.com> - 1:1.22.6-1
changelog:
  - Update to 1.22.6
  - nm-device: add new pending action to keep the device busy when in between states (rh #1759956)
  - cloud-setup: avoid unsupported settings in systemd service unit (rh #1791758)
  - do not create virtual device if master is not present (rh #1795919)
  - allow IPv6 RA timeout to be set to a value higher than 120 seconds (rh #1795957)
  - fix behaviour when 'ipv4.dhcp-timeout' option is set to 'infinity' (rh #1791378)


author: Antonio Cardace <acardace@redhat.com> - 1:1.22.8-1
changelog:
  - Update to 1.22.8
  - Added configuration option to customize IPv6 RA timeout (rh #1801158)
  - Removed length limitation for OVS Bridge, Patches and Interfaces (only Patch types) names (rh #1788432)
  - Reworked asynchronous deactivation of OVS interfaces (rh #1787989, rh #1782701)
  - Fixed failure when creating team interfaces (rh #1798947)
  - ifcfg-rh: fix clearing ovs slave type from ifcfg-rh file (rh #1804167)
  - Fixed bug causing virtual devices to not be available after AddConnection()/Update() (rh #1804350)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.22.8-3
changelog:
  - dhcp: keep trying after a send failure (rh #1806516)
  - ovs: fail port enslavement when the bridge is not found (rh #1797696)


author: Thomas Haller <thaller@redhat.com> - 1:1.22.8-4
changelog:
  - core: fix leaking device state files in /run (rh #1810153)
  - dhcp: fix crash in nettools client when leaking GSource (rh #1810188)


author: Thomas Haller <thaller@redhat.com> - 1:1.25.1-1
changelog:
  - update to 1.25.1 (development)
  - improve documentation (rh #1651594, rh #1819259)
  - vrf: add support (rh #1773908)
  - bond: improve setting default options for miimon and updelay (rh #1805184, rh #1806549)
  - bluetooth: fix crash handling DUN modem (rh #1826635)
  - core: fix potential infinite loop with prefix delegation (rh #1488030)
  - initrd: fixes for running NetworkManager in initrd (rh #1627820, #1710935, #1744935, #1771792)
  - core: prevent multiple attempts to create default wired connection (rh #1687937)
  - bridge: support more options (rh #1755768)
  - libnm,dbus: expose HwAddress for all device types (rh #1786937)
  - core: fix route priority for IPv6 (rh #1814557)
  - core: fix crash during reapply (rh #1816067)
  - core: clear IP address from bridge slave (rh #1816517)
  - ovs: support changing MTU of OVS interfaces (rh #1820052)
  - nm-online: support setting timeout for NetworkManager-wait-online (rh #1828458)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.25.2-1
changelog:
  - update to 1.25.2 (development)
  - support ethtool coalesce and ring options (rh #1614700)
  - core: improve synchronization of qdiscs with kernel (rh #1815875)
  - team: support running without D-Bus (rh #1784363)
  - core: fix potential crash when autoactivating child connections (rh #1778073)
  - ethernet: reset original autonegotiation/speed/duplex settings on deactivation (rh #1807171)
  - core: fix setting IPv6 token in kernel (rh #1819680)


author: Thomas Haller <thaller@redhat.com> - 1:1.26.0-0.1
changelog:
  - update to 1.26-rc1 (1.25.90)
  - core: support more tc qdiscs (tbf and sfq) (rh #1546802)
  - core: support match devices for connection profile by PCI address (ID_PATH) (rh #1673321)
  - ovs: fix peer property for OVS patch interface (rh #1845216)
  - doc: add manual pages nm-settings-dbus and nm-settings-nmcli (rh #1614726)
  - wifi: don't block autoconnect for profiles that never succeeded to connect (rh #1781253)
  - dbus,nmcli: highlight externally managed devices (rh #1816202)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.26.0-0.2
changelog:
  - update to 1.26-rc2 (1.25.91)
  - initrd: set ipv6.method=auto when using IPv4 static configuration (rh #1848943)
  - cloud-setup: add support for Google Cloud load-balancing routes (rh #1821787)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.26.0-0.2.1
changelog:
  - device: restart DHCP only for devices that are active or activating (rh #1852612)
  - initrd: fix generating default BOOTIF= connection (rh #1853277)
  - ovs: fix race condition when setting MAC address for ovs interfaces (rh #1852106)


author: Thomas Haller <thaller@redhat.com> - 1:1.26.0-1
changelog:
  - update to 1.26.0
  - device: reset SR-IOV parameters on activation failure (rh #1819587)
  - initrd: enable ipv6.method=auto with ip=dhcp6 (rh #1854323)
  - core: add "nm-shared" zone for firewalld for shared mode (rh #1834907)
  - ppp: fix taking control of link (rh #1849386)


author: Antonio Cardace <acardace@redhat.com> - 1:1.26.0-2
changelog:
  - core: fix generation of local routes for VRF devices (rh #1857133)
  - team: fix crash on failure to connect to teamd (rh #1856723)
  - core: fix detecting failure of master active-connection (rh #1845018)
  - core: fix warning about setting active_slave of bond when activating master (rh #1858326)
  - import translations (rh #1820552)


author: Thomas Haller <thaller@redhat.com> - 1:1.26.0-3
changelog:
  - core: fix managing devices after resuming from sleep (rh #1855563)
  - dhcp: fix BPF filter for internal client on big endian arch (rh #1861488)
  - core: support warning log setting IPv6 MTU with IPv6 disabled (rh #1840989)
  - wifi: fix crash parsing incomplete BSS info (rh #1866395)


author: Antonio Cardace <acardace@redhat.com> - 1:1.26.0-4
changelog:
  - bond: fix Reapply does not update bond options (rh #1847814)
  - dhcp: support DHCPv6 fqdn_fqdn option for hostname (rh #1858344)


author: Antonio Cardace <acardace@redhat.com> - 1:1.26.0-7
changelog:
  - dhcp: add dhcp-vendor-class-identifier option (rh #1871042)
  - initrd: parse 'rd.net.dhcp.vendor-class' kernel cmdline arg (rh #1872299)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.28.0-0.1
changelog:
  - Update to 1.27.3 (development)
  - device: enforce the absence of a master during activation (rh #1869079)
  - bond: fix race condition setting the "active_slave" option (rh #1856640)


author: Antonio Cardace <acardace@redhat.com> - 1:1.30.0-0.1
changelog:
  - Update to 1.29.1 (development)
  - add library for handling profiles in keyfile format (rh #1813334)
  - initrd: allow disabling NICs during boot (rh #1883958)
  - allow `NM.Device.get_applied_connection_async()` to run by non-privilege user (rh #1882380)
  - nmcli ignores /etc/terminal-colors.d/nmcli.scheme (rh #1886336)
  - pass bridge master to wpa_supplicant when Wlan is part of bridge (rh #1888051)
  - add infiniband support in initrd (rh #1883173)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.30.0-0.2
changelog:
  - device: fix crash in nm_device_reactivate_ip_config()
  - dns: fix crash in systemd-resolved DNS plugin (rh #1894839)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.30.0-0.3
changelog:
  - Update to 1.29.3 (development)
  - Support changing external-ids of OVS bridges and interfaces (rh #1866227)
  - Add a hostname setting (rh #1766944)
  - Support creating veth interfaces (rh #1901523)
  - initrd: fix parsing of ip= arguments with empty first token (rh #1900260)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.30.0-0.4
changelog:
  - Update to 1.29.6 (development)
  - initrd: disable ipv4 and ipv6 by default for vlan parent connection (rh #1903175)
  - initrd: fix parsing of ip= argument with dotted interface name (rh #1898294)


author: Thomas Haller <thaller@redhat.com> - 1:1.30.0-0.6
changelog:
  - Update to 1.29.8 (development)
  - initrd: accept zero-byte prefix for BOOTIF MAC address (rh #1904099)
  - core: fix bond port wrongly detached by dispather call (rh #1888348)
  - cloud-setup: add manual page (rh #1867997)
  - core: fix handling timeout for IPv6 RDNSS,DNSSL option in RA (rh #1874743)


author: Thomas Haller <thaller@redhat.com> - 1:1.30.0-0.7
changelog:
  - Update to 1.29.9 (development)
  - By default check all devices for hostname reverse DNS lookup (rh #1766944)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.30.0-0.8
changelog:
  - Update to 1.29.10 (development)
  - bond: introduce new 'vlan+srcmac' xmit_hash_policy option (rh #1915457)
  - ovs: clean up interfaces from ovsdb at startup (rh #1861296)


author: Antonio Cardace <acardace@redhat.com> - 1:1.30.0-0.9
changelog:
  - Update to 1.29.11 (development)
  - bond: fix changing mode when the device is created externally (rh #1870691)
  - ovs: fix firewalld configuration for ovs-ports (rh #1921107)
  - ovs: avoid race condition when system interface is removed from ovsdb (rh #1923248)
  - doc: mention NETMASK as alternative to PREFIX for addresses in `man nm-settings-ifcfg-rh` (rh #1925123)


author: Thomas Haller <thaller@redhat.com> - 1:1.30.0-0.10
changelog:
  - Update to 1.30-rc1 (1.29.90-dev) (development)
  - cloud-setup: fix removing IPv4 address (rh #1920838)


author: Thomas Haller <thaller@redhat.com> - 1:1.30.0-3
changelog:
  - Increase LimitNOFILE to allow more than 1024 file descriptors (rh #1926599).
    This requires a suitable libndp version that can handle many file descriptors (rh #1933041).


author: Wen Liang <wenliang@redhat.com> - 1:1.32.0-0.4
changelog:
  - Update to 1.31.5 (development)
  - core: configure MTU early before DHCP completes (rh #1890234)
  - core: fix activation handling for ports (rh #1955101, rh #1959961)
  - core: add support for ethtool pause parameters (rh #1899372)
  - dhcp: support option 249 (Microsoft Classless Static Route) (rh #1959461)


author: Thomas Haller <thaller@redhat.com> - 1:1.32.0-0.5
changelog:
  - update to 1.32-rc1 (1.31.90) (release candidate)
  - core: allow to preserved external TFilter and QDisc settings (rh #1928078)
  - bond: support "tlb_dynamic_lb" in "balance-alb" mode (rh #1959934)


author: Wen Liang <wenliang@redhat.com> - 1:1.32.0-1
changelog:
  - update to 1.32.0 release
  - veth: fix null error when deleting the device (rh #1915278)
  - veth: fix crash when deleting the device profile (rh #1915276)
  - firewall: add new "nftables" firewall-backend (rh #1548825)
  - DNS: fix lookup of hostname via DNS (rh #1970335)


author: Wen Liang <wenliang@redhat.com> - 1:1.32.2-1
changelog:
  - update to 1.32.2 release
  - device: prefer IPv6 not-deprecated addresses for hostname lookup (rh #1820770)
  - docs: describe qdiscs and tfilters in nm-settings manpage (rh #1847894)
  - cloud-setup: preserve IPv4 addresses/routes/rules from profile (rh #1971527)
  - daemon: performance improvements (rh #1847125)
  - dhcp/systemd: ignore FORCERENEW requests for DHCPV4 (rh #1961251, CVE-2020-13529)
  - Add bridge_role in 802-3-ethernet.s390-options using nmcli (rh #1935842)


author: Gris Ge <fge@redhat.com> - 1:1.32.4-1
changelog:
  - Upgrade to 1.32.4 with fixes of:
  - nmcli: show DNS SEARCH field in device information. (rh #1852317)
  - device: avoid crash setting VPN config during unrealize. (rh #1912423)
  - core: send ARP announcements when there is carrier. (rh #1956793)
  - core: add ipv[46].required-timeout option to wait for IP configuration while activating. (rh #1961666)
  - core: start DHCPv6 when a prefix delegation is needed for shared mode. (rh #1973199)
  - ifcfg: log warning about invalid keys in ifcfg files. (rh #1959656)
  - cloud-setup: add support for Aliyun cloud. (rh #1823315)


author: Gris Ge <fge@redhat.com> - 1:1.32.6-1
changelog:
  - Upgrade to 1.32.6 release
  - core: fix adding stale local routes when address changes (rh #1979192)
  - dhcp: handle filename/bootfile_name DHCP option and write it to device state
    file for initrd/kickstart (rh #1979387)
  - initrd: add "ib.pkey=" command line option (rh #1805708)
  - core: introduce "keep-configuration" device option to forcefully activate a
    profile on start (rh #1934122)


author: Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.32.8-1
changelog:
  - Upgrade to 1.32.8 release
  - firewalld: configure zones on "Reloaded" signal (rh #1982403)
  - ethtool: support configuring newer gigabit ethernet speeds (rh #1897004)
  - core: fix wrong MTU for bridge interfaces (rh #1973536)
  - cloud-setup: fix gateway address for Aliyun cloud (rh #1823315)


author: Wen Liang <wenliang@redhat.com> - 1:1.32.10-1
changelog:
  - update to 1.32.10 release
  - nm-initrd-generator: add kernel command line options ethtool autoneg and speed (rh #1940934)
  - IP: fix the order of IP addresses during service restart (rh #1988751)


author: Ana Cabral <acabral@redhat.com> - 1:1.34.0-0.1
changelog:
  - Upgrade to 1.33.2 release (development) (rh #1996617)
  - Obtain permanent hardware address via netlink or lookup via ethtool (rh #1987286)
  - Show more information about routes in nmcli (rh #1870059)
  - Add test for creation and activation of new connection via interface (rh #1763054)
  - ethtool: fix setting autonegotiation/speed on reactivation (rh #1897004)
  - Fix MTU's decrease after the removal of 802-3-ethernet configuration (rh #1973536)


author: Ana Cabral <acabral@redhat.com> - 1:1.34.0-0.2
changelog:
  - Upgrade to 1.33.3 release (development)
  - platform: don't listen for tc netlink messages (rh #1753677)
  - cloud-setup: better handle other route configuration (rh #2006370)
  - Fix autoneg advertisement (rh #1897004)


author: Ana Cabral <acabral@redhat.com> - 1:1.34.0-0.3
changelog:
  - Upgrade to 1.33.4 release (development)
  - Deprecate "master"/"slave" on bonding and bridge API (rh #1949023)
  - core: Fix configuration reload for active devices (rh #1852445)
  - Update systemd-udev dependency (rh #2012123)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.36.0-0.1
changelog:
  - Upgrade to 1.35.1 release (development)
  - core: refactor IP configuration code (rh #1868254)
  - core: fix deleting external route during service restart (rh #2010640)


author: Wen Liang <wenliang@redhat.com> - 1:1.36.0-0.2
changelog:
  - Upgrade to 1.35.2 release (development)
  - initrd: handle ip=dhcp,dhcp6 specially to wait for both IPv4 and IPv6 (rh #1961666)
  - bridge: fix ageing_time bridge option (rh #1871950)
  - core: make sure Device and AC emit StateChanged a bit later (rh #2006677)
  - ovsdb: deactivate removed device if does not have a master (rh #2022275)
  - nmcli: fix setting wake-on-lan property on edit mode (rh #2016348)
  - core: fix wrong DHCPv6 timeouts due to endianness problem (rh #2027267)


author: Wen Liang <wenliang@redhat.com> - 1:1.36.0-0.3
changelog:
  - Upgrade to 1.35.3 release (development)
  - device: fix update of the ip-iface property (rh #2027490)
  - platform: add bpf filter to ignore routes from routing daemons (rh #1861527)


author: Wen Liang <wenliang@redhat.com> - 1:1.36.0-0.4
changelog:
  - Upgrade to 1.35.4 release (development)
  - ipv4ll: fix assert on external LL address removal (rh #2028404)
  - openvswitch: add DPDK n_rxq configuration option (rh #2001563)
  - device: ignore ndisc signal if device has no ifindex (rh #2013266)
  - bluetooth: fix invalid assertion in NMBluezManager:dispose() (rh #2028427)
  - supplicant: enable SAE-H2E (rh #2019396)


author: Thomas Haller <thaller@redhat.com> - 1:1.36.0-0.6
changelog:
  - Upgrade to 1.35.6 release (development)
  - Move ifup/ifdown scripts to new NetworkManager-initscripts-updown package (rh #2022418)
  - wwan: fix assertion failure in modem/ppp code (rh #2028385)
  - core: fix performance regression with 500vlans test (rh #2028849)
  - core: drop defective BPF filter for netlink sockets that caused hangs (rh #2037411)
  - initrd: add support for rd.znet_ifnames (rh #1980387)


author: Thomas Haller <thaller@redhat.com> - 1:1.36.0-0.7
changelog:
  - Upgrade to 1.35.7 release (development)
  - core: fix crash related to DHCPv6 leases (rh #2028849)
  - wifi: fix stale ActiveAccessPoint in D-Bus (rh #1983747)
  - libnm: fix dangling pointer in NMObject (rh #2039331)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.36.0-0.8
changelog:
  - Upgrade to 1.35.91 release (release candidate)
  - bond: fix duplicate IPv4 address detection (rh #2028751)
  - core: add support for blackhole routes (rh #1937823) (rh #2013587)
  - core: re-assess IP configuration if one IP family times out (rh #2051904)
  - ovs: remove ovsdb entry on interface removal (rh #2047302)
  - ovs: properly clean up devices on daemon shutdown (rh #2029937)
  - core: avoid losing addresses on handover from initrd to ral root (rh #2047302)
  - core: fix a possibe assertion failure in ACD (rh #2047788)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.36.0-0.9
changelog:
  - revert: generate docs during build instead of using pre-generated (rh #1995915)
  - Upgrade to 1.35.92 (release candidate)
  - ppp: increase disconnect timeout (rh #2049596)
  - core: finish activation after all objects are committed (rh #2043133)
  - ipv6: add support for multipath routes (rh #1837254)
  - keyfile: do not write empty string list properties (rh #2022623)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.36.0-1
changelog:
  - Upgrade to 1.36.0 release
  - core: avoid losing L3 configuration the second time it's applied (rh #2043514)
  - ovs: avoid removing OVSDB entries on daemon shutdown (rh #2055665)
  - nmcli: fix defaults for some properties on interactive add (rh #2053603)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.37.2-1
changelog:
  - Upgrade to 1.37.2 release (development)
  - core: preserve external ports during checkpoint rollback (rh #2035519)
  - core: fix ovs bridge deletion (rh #1935026)
  - core: shorten hostname when too long (rh #2033643)
  - nm-online: bump the timeout upper limit to 2073600 seconds (rh #2025617)
  - cloud-setup: fix crash when handling sigterm (rh #2027674)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.37.3-1
changelog:
  - Upgrade to 1.37.3 release (development)
  - core: allow reapply on autoconnect-slaves property change (rh #2065049)
  - wifi: do not advertise channels outside regulatory domain (rh #2062785)
  - wifi: warn about WEP being phased out (rh #2030997)
  - bond: reject reapply when fail_over_mac was changed (rh #2003214)


author: Ana Cabral <acabral@redhat.com> - 1:1.39.0-1
changelog:
  - Update to 1.39.0 release (development)
  - ovs, dpdk: fix creating ovs-interface when the ovs-bridge is netdev
    (rh #2001792)


author: Thomas Haller <thaller@redhat.com> - 1:1.39.2-1
changelog:
  - Update to 1.39.2 release (development)
  - dhcp: set "src" attribute for DHCP routes (rh #1995372)
  - dhcp: drop internal DHCPv4 client based on systemd code (rh #2073067)
  - core: delay startup complete for DNS update (rh #2049421)
  - nmcli: support offline mode to create and edit keyfiles (rh #1361145)


author: Thomas Haller <thaller@redhat.com> - 1:1.39.3-1
changelog:
  - Update to 1.39.3 release (development)
  - dhcp: save leases in /run (rh #1943153)
  - ovs: use asynchronous attach-port (rh #2052441)
  - device: set MTU after attaching bond port (rh #2071985)
  - l3cfg: drop NM_L3_CFG_COMMIT_TYPE_ASSUME and assume_config_once (rh #2077605)


author: Ana Cabral <acabral@redhat.com> - 1:1.39.5-1
changelog:
  - Update to 1.39.5 release (development)
  - device: commit l3cfg on link change only when the device is activating (rh #2079054)
  - l3cfg: during reapply, also clear IPv6 temporary addresses (rh #2082230)
  - dhcp: support overlong DHCP host names (rh #2033643)
  - cloud-setup: reorder addresses to honor "primary_ip_address" (rh #2082000)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.39.6-1
changelog:
  - Update to 1.39.6 release (development)
  - Implement ACD (address conflict detection) for DHCPv4 (rh #1713380)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.39.7-1
changelog:
  - Update to 1.39.7 release (development)
  - core: cancel the IP check on deactivation (rh #2080928)
  - core: ensure DHCP is restarted every time the link goes up (rh #2079406)
  - core: fix a leak of L3 configuration memory (rh #2083453)
  - ppp: fix a race with pppd when removing addresses (rh #2085382)
  - wifi: fix a crash when checking WEP supplicant capability (rh #2092782)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.39.8-1
changelog:
  - Update to 1.39.8 release (development)
  - core: make ipv6.addr-gen-mode default configurable (rh #1743161) (rh #2082682)
  - dhcpv6: finish DAD before considering a lease to be good (rh #2096386)
  - core: add connection.wait-activation-delay property (rh #2008337)


author: Vojtech Bubela <vbubela@redhat.com> - 1:1.39.10-1
changelog:
  - Update to 1.39.10 release (development)
  - initrd: set a default carrier timeout of 10 seconds in initrd (rh #2079277)
  - dhcp: wait DAD completion for DHCPv6 addresses (rh #2096386)
  - libnm: support wait-activation-delay property (rh #2008337)
  - veth: fix veth activation on booting (rh #2105956)
  - support a ipv6.addr-gen-mode knob in the global config (rh #208268)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.39.11-1
changelog:
  - Update to 1.39.11 release (development)
  - dhcp: fix EXTENDED DHCP event to accept lease for dhclient plugin (rh #2109285)
  - ovs: honor unmanaged setting also for interfaces that fail (rh #2077950)


author: Ana Cabral <acabral@redhat.com> - 1:1.39.90-1
changelog:
  - Update to 1.39.90 release (release candidate)
  - bridge: fix reapply of non-bridge properties (rh #2092762)
  - bridge: fix wired.mtu reapply (rh #2076131)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.40.2-1
changelog:
  - Update to 1.40.2 release
  - core: fix persisting Infiniband partition connections (rh #2122703)
  - core: wait for carrier before resolving hostname via DNS (rh #2118817)
  - core: fix handling of autoconnect-retries with multiconnect (rh #2039734)
  - nmcli: allow removing a port connection from a bond (rh #2126262)
  - initrd: decrease autoconnect priority for initrd connections (rh #2089707)
  - dhcp: wait DAD completion for DHCPv6 addresses (send decline) (rh #2096386, rh #2099794)
  - ovs: wait that links disappear during initial cleanup (rh #2060031)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.40.10-1
changelog:
  - Update to 1.40.10 release
  - cloud-setup: preserve addresses added externally (rh #2132754)
  - veth: fix detection of existing interface and peer (rh #2129829)
  - dns: ensure dnsmasq is stopped after disabling it and a restart (rh #2120763)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.40.12-1
changelog:
  - Update to 1.40.12 release
  - core: retry if a rtnetlink socket runs out of buffer space (rh #2154350)


author: Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.40.16-5
changelog:
  - support bond port prio property (rh #1920398)
  - team: don't try to connect to teamd in update_connection() (rh #2182029)


author: Liwei Ge <geliwei@openanolis.org> - 1:1.40.16-15.0.1
changelog:
  - Remove NetworkManager-config-connectivity-redhat
  - cherry-pick `add sw patch #70db9120b521bf5feb6c2d9d12ed1880fa586e4f`. (nijie@wxiat.com)


author: Wen Liang <wenliang@redhat.com> - 1:1.40.16-18
changelog:
  - vpn: fix routing rules support in vpn conenctions (RHEL-73052)
  - vpn: Place gateway route to table defined in ipvx.route-table (RHEL-73051)


author: Pavel Cahyna <pcahyna@redhat.com> - 2.0.32-2
changelog:
  - Resolve issues found by rpmdiff
    - add explicit Requires: on subpackages to avoid the need to test
      interoperability between the various combinations of old and new
      subpackages


author: Pavel Cahyna <pcahyna@redhat.com> - 2.0.32-3
changelog:
  - Add a patch to resolve one more issue found by rpmdiff/rpminspect:
    fix getaddrinfo detection to avoid using gethostbyname.


author: Phil Knirsch <pknirsch@redhat.com> 1.4.14-2
changelog:
  - Updated to OpenIPMI-1.4.14
  - Split the main package into normal and libs package for multilib support
  - Added ipmitool-1.8.2 to OpenIPMI and put it in tools package
  - Added sysconf and initscript (#158270)
  - Fixed oob subscripts (#149142)


author: Phil Knirsch <pknirsch@redhat.com> 1.4.14-7
changelog:
  - Fixed the unwanted output of failed module loading of the initscript. Behaves
    now like all our other initscripts (#165476)


author: Phil Knirsch <pknirsch@redhat.com> 1.4.14-9
changelog:
  - Another update to latest initscripts from Dell
  - Fixed some missing return statements for non-void functions (#164138)


author: Phil Knirsch <pknirsch@redhat.com> 1.4.14-13
changelog:
  - Rebuilt to link against latest openssl libs.
  - Fixed ipmitool not setting session privilege level (#172312)


author: Phil Knirsch <pknirsch@redhat.com> 1.4.14-16
changelog:
  - Included FRU fix for displaying FRUs with ipmitool
  - Included patch for new option to specify a BMC password for IPMI 2.0 sessions


author: Phil Knirsch <pknirsch@redhat.com> 1.4.14-18
changelog:
  - Updated ipmitool to latest upstream version.
  - Removed 3 patches for already fixed bugs in latest ipmitool.
  - Adapted warning message fix for ipmitool for latest version.


author: Phil Knirsch <pknirsch@redhat.com> 2.0.6-1
changelog:
  - Fixed bug with type conversion in ipmitool (#191091)
  - Added python bindings 
  - Split off perl and python bindings in separate subpackages
  - Dropped obsolete patches
  - Added missing buildprereq on readline-devel
  - Made it install the python bindings properly on 64bit archs


author: Jan Safranek <jsafrane@redhat.com> - 2.0.14-3
changelog:
  - split ipmitool to separate package
  - added 'reload' functionality to init script
  - added seraparate -gui subpackage


author: Jan Safranek <jsafrane@redhat.com> - 2.0.14-8
changelog:
  - shorter probe interval is used in init script, making the service startup
    quicker in most situations (#475101)


author: Jan Safranek <jsafrane@redhat.com> - 2.0.16-9
changelog:
  - fix package License: field, there *are* sources with BSD header
  - distribute README files and COPYING in package


author: Jan Safranek <jsafrane@redhat.com> - 2.0.19-2
changelog:
  - Updated RPM scriptlets with latest systemd-rpm macros (#850246)
  - Fixed fedora-review tool complaints


author: Ledvinka Ales <aledvink@redhat.com> - 2.0.19-5
changelog:
  - Support aarch64 by replicating release toolchain.
  - Configuration subpackage with kernel probed wildcard module aliases.
    as workaround for bz#961878 and fesco#1110
  - Man pages symlinks same as bin symlinks.
  - ipmi_ui command help argument.
  - ipmilan missing options.
  - Fixed build requirements.


author: Ledvinka Ales <aledvink@redhat.com> - 2.0.19-7
changelog:
  - Hint compilation to avoid strict aliasing and prevent type-punned pointer issues.
  - Fix rPath regression for OpenIPMI-perl library.


author: Boris Ranto <branto@redhat.com> - 0:2.0.22-1
changelog:
  - New version (0:2.0.22-1)
  - Apply 'OpenIPMI-2.0.18-pthread-pkgconfig.patch'
  - Apply './OpenIPMI-2.0.19-man.patch'
  - Apply 'OpenIPMI-2.0.21-nobundle.patch'


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 2.0.23-4
changelog:
  - Python 2 binary package renamed to python2-openipmi
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Josef Ridky <jridky@redhat.com> - 2.0.24-1
changelog:
  - New upstream release 2.0.24
  - spec update (based on Tomasz Kłoczko's pull request)
  - reduce the number of SONAME dependencies by use -Wl,--as-needed in LDFLAGS
  - change COPYING COPYING.BSD COPYING.LIB files as %license
  - add %{_sysconfdir}/ipmi directory to lanserv %files list
  - execute /sbin/ldconfig in %post and %postun section for lanserv sub-packages
  - remove desktop-file-utils and GUI related packages from BuildRequires
  - use roff links instead symlinks to gzipped man pages
  - use %autosetup in %prep
  - remove Group tags


author: Tomasz Kłoczko <kloczek@fedoraproject.org> - 2.0.24-1
changelog:
  - remove pkgconfig from devel Requires
  - remove libedit Requires (it is autogenerated as SONAME dependency)
  - remove main package dependecy fron devell Requires (only libs is needed
  - add use %{?_isa} macro in Requires


author: Josef Ridky <jridky@redhat.com> - 2.0.25-1
changelog:
  - New upstream release 2.0.25 (#1568194)
  - Replace Python2 with Python3
  - Drop OpenIPMI-python2 and set it as Obsolete
  - Introduce new OpenIPMI-python3 package


author: Kamil Dudka <kdudka@redhat.com> 2.2.52-14
changelog:
  - drop obsolete BuildRoot and Group tags
  - fix spurious acl_check() failure on setfacl --restore (#1451826)


author: Kamil Dudka <kdudka@redhat.com> 2.2.52-15
changelog:
  - setfacl.1: document the meaning of '-' in perms (#1337039)
  - avoid failure of %check when building as root (#1085389)
  - apply patches automatically to ease maintenance


author: Michael K. Johnson <johnsonm@redhat.com> 2.0.11-1
changelog:
  - Initial Red Hat package
    Made as few changes as possible relative to upstream packaging to
    make it easier to maintain long-term.  This means that some of
    the techniques used here are definitely not standard Red Hat
    techniques.  If you are looking for an example package to fit
    into Red Hat Linux transparently, this would not be the one to
    pick.
  - acl-devel -> libacl-devel


author: Stephen C. Tweedie <sct@redhat.com> 2.2.7-3
changelog:
  - Add /usr/include/acl to files manifest
  - Fix location of doc files, add main doc dir to files manifest


author: Thomas Woerner <twoerner@redhat.com> 2.2.39-1
changelog:
  - new version 2.2.39
  - fixed usage of long UTF-8 filenames (#183181)
    Thanks to Andrey for the initial patch.


author: Karsten Hopp <karsten@redhat.com> 2.2.39-3
changelog:
  - fix buildroot
  - remove trailing dot from summary
  - -devel requires same version of libacl
  - escape macro in changelog
  - make .so symlink relative


author: Kamil Dudka <kdudka@redhat.com> 2.2.49-4
changelog:
  - do not package a static library (#556036)
  - remove multilib patch no longer useful
  - cleanup in BuildRequires


author: Till Maas <opensource@till.name> - 2.2.52-8
changelog:
  - Rebuilt for
    https://fedoraproject.org/wiki/Changes/Harden_all_packages_with_position-independent_code


author: Al Stone <ahs3@redhat.com> - 20190108-1
changelog:
  - Update to 20190108 source tree, including patch refeshes.
  - Replace use of strncpy() with memcpy() when moving ASCII bytes around;
    the tables use "strings" but they are seldom null terminated, causing
    GCC9 to complain.  Closes BZ#1674629.


author: Al Stone <ahs3@redhat.com> - 20190509-2
changelog:
  - Added an arm7hl specific fix acenv.h; GCC9 on arm7hl can now deal
    with misalignments so the unaligned patch could be relaxed a bit
  - the templates test was failing because of the backup left behind
    by the patch macro, so change the invocation of the macro.


author: Weitao Zhou <zhouwt@linux.alibaba.com> - 20190509-5.0.1
changelog:
  - Fix upgrade and downgrade warning (xuchunmei)
    * remove %pre to avoid warning when upgrade from old version
    * exec "alternatives --install" to avoid missing of acpixtract and acpidump
      when downgrade to old version
  - Fix gcc10 -fno-common compile issue for compatible with gcc10 build (Liwei Gei)
  - ignore mismatched ACPI Warning message at misc tests


author: Sumit Bose <sbose@redhat.com> - 0.8.2-6
changelog:
  - [abrt] [faf] adcli: raise(): /usr/sbin/adcli killed by 6 [#1806260]
  - No longer able to delete computer from AD using adcli [#1846882]
  - adcli: presetting $computer in $domain domain failed: Cannot set computer
    password: Authentication error [#1846878]
  - Typo in adcli update --help option [#1791611]
  - Manpage and help does not explain the use of "-C" option [#1791545]


author: Sumit Bose <sbose@redhat.com> - 0.8.2-8
changelog:
  - Add --use-ldaps option to adcli update as well [#1883467]
  - Cannot join a pre-staged Computer Account on AD in Custom OU using Delegated
    user [#1734764]
  - missing documentation for required AD rights for adcli join and net
    join [#1852080]
  - [RFE] Add new mode to just create an AD account to be able to connect to
    LDAP [#1854112]


author: Sumit Bose <sbose@redhat.com> - 0.8.2-10
changelog:
  - [RFE] Adcli and Realm Error Code Optimization Request [#1889386]
  - [RFE] adcli should allow to modify DONT_EXPIRE_PASSWORD attribute [#1769644]


author: Sumit Bose <sbose@redhat.com> - 0.8.2-12
changelog:
  - [RFE] Allow adcli to create AD user with password as well as set or reset
    existing user password [#1952828]
  - [RFE] add option to populate "managed by" computer attribute [#1690920]


author: Miroslav Lichvar <mlichvar@redhat.com> 14:2.1a15-2
changelog:
  - split from tcpdump package (#193657)
  - update to 2.1a15
  - clean up files in /var
  - force linking with system libpcap


author: Miroslav Lichvar <mlichvar@redhat.com> 14:2.1a15-6
changelog:
  - improve init script (#246869)
  - allow -n 0/32 to disable reporting bogons from 0.0.0.0 (#244606)
  - update license tag
  - update ethercodes.dat


author: Miroslav Lichvar <mlichvar@redhat.com> 14:2.1a15-13
changelog:
  - update ethercodes.dat (#577552)
  - mark ethercodes.dat as noreplace
  - fix init script LSB compliance
  - include Debian arp2ethers and massagevendor man pages (#526160)
  - don't include massagevendor-old script anymore


author: Ales Ledvinka <aledvink@redhat.com> - 14:2.1a15-26
changelog:
  - fix permissions related to collected database
  - update ethcodes defaults to current public IEEE OUI-32


author: Tomáš Mráz <tmraz@redhat.com> - 3.1.20-7
changelog:
  - the ownership of the spool directory should be root as at is configured
    with daemon username root
  - document the -n option


author: Jakub Martisko <jamartis@redhat.com> - 3.10.3-1
changelog:
  - Update to new 3.10.3 stable version.
  - Remove ppc64/ppc64le related patches.
  - All packages now use -A option to specify the target CPU/Architecture instead of 
  sed substitutions and auto detection. The packages should now be less dependant on the 
  builder machine used.
  - Base package for each architecture should now be configured to be compatible with the 
  most basic machine of given type.
  - In addittion to base package, added some optimized packages for more advanced CPUs for
  most architectures.
  - Dropped sse2/sse3 subpackages for ix86


author: Jakub Martisko <jamartis@redhat.com> - 3.10.3-6
changelog:
  * Pass all required compiler/linker flags
  - use annobin plugin
  - generate assembler build notes
  Related: #1624098


author: Jakub Martisko <jamartis@redhat.com> - 3.10.3-8
changelog:
  * Update the s390 subpackages:
  - The base pakcage is now optimized to z13
  - New subpackage is introduced: z14
  - All remaining subpackages for s390 are being deprecated
  - Clean up of the spec file 
  - Some commented out subpackages were removed form the spec
  - These subpackages were not built/shipped -> no change from the users point of view
  Resolves: #1782560
  Resolves: #1780286
  Resolves: #1782561


author: Kamil Dudka <kdudka@redhat.com> 2.4.47-19
changelog:
  - fix test-suite failure with perl-5.26.0 (#1473853)
  - apply patches automatically to ease maintenance
  - update URL of the upstream source tarball


author: Steve Grubb <sgrubb@redhat.com> 3.0-0.15.20191104git1c2f876
changelog:
  resolves: rhbz#1757986 - Rebase audit package on 8.2 for updates
  resolves: rhbz#1767054 - move audit rules to shared data directory
  resolves: rhbz#1746018 - Breakup 30-ospp-v42.rules into more granular files
  resolves: rhbz#1740798 - auditctl(8) needs clarification for backlog_limit
  resolves: rhbz#1497279 - Add option to interpret fields in audit syslog plugin


author: Sergio Correia <scorreia@redhat.com> - 3.0.5-1
changelog:
  - Rebase audit package on 8.6
    Resolves: rhbz#1939406
    Resolves: rhbz#1906065
    Resolves: rhbz#1921447
    Resolves: rhbz#1927884
    Resolves: rhbz#1921658


author: Sergio Correia <scorreia@redhat.com> - 3.0.7-2
changelog:
  - Adjust sample-rules dir permissions
    Resolves: rhbz#2054727 - /usr/share/audit/sample-rules is no longer readable by non-root users


author: Sergio Correia <scorreia@redhat.com> - 3.0.7-3
changelog:
  - Fix path normalization in auparse
    Resolves: rhbz#2062612 - auparse missing information when used with --format-text


author: Sergio Correia <scorreia@redhat.com> - 3.0.7-4
changelog:
  - Drop ProtectHome from auditd.service as it interferes with rules
    Resolves: rhbz#2071727 - Default systemd service config blocks audit watch rules in some directories


author: Radovan Sroka <rsroka@redhat.com> - 3.0.7-5
changelog:
  - Introduce new fanotify record fields
  Resolves: rhbz#2216668
  - invalid use of flexible array member
  Resolves: rhbz#2116867


author: Zhao Hang <wb-zh951434@alibaba-inc.com> - 3.0.7-5.0.1
changelog:
  - Remove unneeded modification
  - Add doc sub package (Bo Ren)
  - Split audit-3.0.8-flex-array-workaround.patch (Bo Ren)


author: Till Maas <opensource@till.name> - 2.4.1-2
changelog:
  - Rebuilt for Fedora 23 Change
    https://fedoraproject.org/wiki/Changes/Harden_all_packages_with_position-independent_code


author: Steve Grubb <sgrubb@redhat.com> 2.4.4-1
changelog:
  - New upstream bugfix release
  - Fixes CVE-2015-5186 Audit: log terminal emulator escape sequences handling


author: Peter Robinson <pbrobinson@fedoraproject.org> 2.4.4-2
changelog:
  - Fix FTBFS with hardened flags by using the distro CFLAGS
  - Tighten deps with the _isa macro
  - Use goarches macro to define supported GO architectures
  - Minor cleanups


author: Steve Grubb <sgrubb@redhat.com> 2.5-1
changelog:
  - New upstream release
  - Fixes #1241565 - still logs way too much
  - Fixes #1238051 - audit.rules should be generated from by augenrules


author: Steve Grubb <sgrubb@redhat.com> 2.6.2-1
changelog:
  - New upstream bugfix release
  - Fixes 1351954 - prevents virtual machine from starting up in GNOME Boxes


author: Tom Stellard <tstellar@redhat.com> - 2.7.8-2
changelog:
  - Use go-toolset-7 instead of golang
  - Package now must be built with: rhpkg --release rhel-8.0-go-toolset


author: Steve Grubb <sgrubb@redhat.com> 3.0-0.8.20180831git0047a6c
changelog:
  resolves: rhbz#1639745 - build requires go-toolset-7 which is not available
  resolves: rhbz#1643567 - service auditd stop exits prematurely
  resolves: rhbz#1616428 - Update git snapshot of audit package
  - Remove static libs subpackage


author: Steve Grubb <sgrubb@redhat.com> 3.0-0.11.20190607gitf58ec40
changelog:
  resolves: rhbz#1643567 - service auditd stop exits prematurely
  resolves: rhbz#1693470 - libauparse memory leak
  resolves: rhbz#1694071 - ausearch doesn't record device/inode details checkpointing a single file
  resolves: rhbz#1695638 - Rebase audit package to pick up latest bugfixes
  resolves: rhbz#1705894 - aureport aborts when using a specific input
  resolves: rhbz#1706045 - RFE: Backport support for new audit record types
  resolves: rhbz#1715852 - RFE: provide a way to filter on network address family


author: Radovan Sroka <rsroka@redhat.com> - 3.0.7-5
changelog:
  - Introduce new fanotify record fields
    Resolves: rhbz#2216668
  - invalid use of flexible array member
    Resolves: rhbz#2116867


author: Zhao Hang <wb-zh951434@alibaba-inc.com> - 3.1.2-1.0.1
changelog:
  - Add doc sub package (Bo Ren)
  - cherry-pick `add sw patch #63160b250a36d3a0326470e2814e9ad8d6b45589` (nijie@wxiat.com)


author: Richard W.M. Jones <rjones@redhat.com> - 1.13.0-2
changelog:
  - Parse auto_reset_crashkernel in kdump
    resolves: rhbz#2042772
  - Add new directives and options for chrony


author: Richard W.M. Jones <rjones@redhat.com> - 1.13.0-4
changelog:
  - Fix parsing of /usr/lib/tmpfiles.d/provision.conf
  - Fix parsing of /etc/kernel/cmdline
    resolves: rhbz#2155136, rhbz#2159282


author: Pavel Březina <pbrezina@redhat.com> - 1.1-1
changelog:
  - Rebase to authselect-1.1 (RHBZ #1685516)
  - Notify that oddjob-mkhomedir needs to be enabled manually (RHBZ #1694103)
  - Ask for smartcard insertion when smartcard authentication is required (RHBZ #1674397)
  - Update translations (RHBZ #1689973)


author: Pavel Březina <pbrezina@redhat.com> - 1.2.1-1
changelog:
  - Rebase to authselect-1.2.1 (RHBZ #1810471)
  - CLI commands are now correctly translated (RHBZ #1816009)
  - Remove unsupported features from sssd profile description (RHBZ #1830251)
  - add `with-files-access-provider` to sssd profile (RHBZ #1734094)
  - switch to pam_usertype module (RHBZ #1773567)
  - fix typo in sssd profile description (RHBZ #1787638)
  - add minimal profile (RHBZ #1654018)


author: Pavel Březina <pbrezina@redhat.com> - 1.2.2-2
changelog:
  - try_first_pass option no longer works on some PAM modules in RHEL8 (RHBZ #1949070)
  - Need to localize the description of --debug option in authselect show (RHBZ #1970408)


author: Pavel Březina <pbrezina@redhat.com> - 1.2.5-1
changelog:
  - Rebase to 1.2.5 (RHBZ #2080238)
  - sssd profile with-smartcard no longer prevents local users from accessing cron (RHBZ #2070325)
  - backup-restore now works correctly (RHBZ #2066535)
  - add with-subid to sssd profile (RHBZ #2063750)


author: Pavel Březina <pbrezina@redhat.com> - 1.2.6-1
changelog:
  - Rebase to 1.2.6 (RHBZ #2142805)
  - Update translations (RHBZ #2139696)
  - Change password hashing algorithm from yescrypt back to sha512 (RHBZ #2151140)


author: Pavel Březina <pbrezina@redhat.com> - 1.2.6-2
changelog:
  - Fix Japanese translations (RHBZ #2216755)
  - Update translations (RHBZ #2189557)
  - Do not prompt for password twice when changing password of local user (RHBZ #2179607)


author: Ian Kent <ian.kent@pobox.com>
changelog:
  - Add patch to implement directory ghosting and direct mounts
  - Add patch to for autofs4 module to support ghosting


author: Ian Kent <raven@themaw.net>
changelog:
  - Cleaned up an restructured my added code
  - Corrected ghosting problem with 2.4.19 and above
  - Added autofs4 ghosting patch for 2.4.19 and above
  - Implemented HUP signal to force update of ghosted maps


author: Ian Kent <raven@themaw.net>
changelog:
  - Implemented LDAP direct map handling for nisMap and automountMap schema
  - Fixed autofs4 ghosting patch for 2.4.19 and above (again)
  - Added locking to fix overlapping internal calls to (u)mount 
  - Added wait for mtab~ to improve tolerance of overlapping external calls to (u)mount
  - Fixed ghosted directory removal after failed mount attempt


author: Ian Kent <raven@themaw.net>
changelog:
  - Fixed autofs4 ghosting patch for 2.4.19 and above (again)
  - Fixed autofs directory removal on failure of autofs mount
  - Fixed lock file wait function overlapping calls to (u)mount


author: Ian Kent <raven@themaw.net>
changelog:
  - Removed ineffective lock stuff
  - Added -n to bind mount to prevent mtab update error
  - Added retry to autofs umount to clean matb after fail
  - Redirected messages from above to debug log and added info message
  - Fixed autofs4 module reentrancy, pwd and chroot handling


author: Ian Kent <raven@themaw.net>
changelog:
  - Checked and merged most of the RedHat v3 patches
  - Fixed kernel module handling wu-ftpd login problem (again)


author: Jeff Moyer <jmoyer@redhat.com> 1:4.1.0-3
changelog:
  - Ported forward Red Hat's patches from 3.1.7 that were not already present
    in 4.1.0.
  - Moving autofs from version 3.1.7 to 4.1.0


author: Jeff Moyer <jmoyer@redhat.com> 1:4.1.0-4
changelog:
  - comment out /net and /misc from the default auto.master.  /net is important
    since in a default shipping install, we can neatly co-exist with amd.


author: Jeff Moyer <jmoyer@redhat.com> 1:4.1.0-5
changelog:
  - make the init script only recognize redhat systems.  Nalin seems to remember
    some arcane build system error that can be caused if we don't do this.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.0-7
changelog:
  - Moved the freeing of ap.path to cleanup_exit, as we would otherwise 
    reference an already-freed variable.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.1-3
changelog:
  - Fix bug in get_best_mount, whereby if there is only one option, we 
    choose nothing.  This is primarily due to the fact that we pass 0 in to
    the get_best_mount function for the long timeout parameter.  So, we
    timeout trying to contact our first and only server, and never retry.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.1-5
changelog:
  - Clarify documentation on direct maps.
  - Send automount daemons a HUP signal during reload.  This tells them to 
    re-read maps (otherwise they use a cached version.  Patch from the autofs
    maintainer.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.1-6
changelog:
  - Add the /etc/sysconfig/autofs file, and supporting infrastructure in 
    the init script.
  - Add support for UNDERSCORE_TO_DOT for those who want it.
  - We no longer own /net.  Move it to the filesystem package.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.2-1
changelog:
  - Change hard-coded paths in the spec file to the %{_xxx} variety.
  - Update to upstream 4.1.2.
  - Add a STRIPDASH option to /etc/sysconfig/autofs which allows for
    compatibility with the Sun automounter options specification syntax in
    auto.master.  See /etc/sysconfig/autofs for more information.  Addresses
    bug 113950.


author: <jmoyer@redhat.com> - 1:4.1.2-2
changelog:
  - Pass --libdir= to ./configure so we get this right on 64 bit platforms that 
    support backwards compat.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.2-5
changelog:
  - Ian has a new fix for replicated server and multi-mounts.  Updated the 
    patch for testing.  Still beta.  (Ian Kent)


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.2-6
changelog:
  - The lookup_yp module only dealt with YPERR_KEY, all other errors were 
    treated as success.  As a result, if the ypdomain was not bound, the 
    subprocess that starts mounts would SIGSEGV.  This is now fixed.
  - Option parsing in the init script was not precise enough, sometimes matching
    filesystem options to one of --ghost, --timeout, --verbose, or --debug.  
    The option-parsing patch addresses this issue by making the regexp's much
    more precise.
  - Ian has rolled a third version of the replicated mount fixes.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-2
changelog:
  - Incorporate patch from Ian which fixes an infinite loop seen by those
    running older versions of the kernel patches (triggered by non-strict mounts
    being the default).


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-4
changelog:
  - Perform an icmp ping request before rpc_pings, since the rpc clnt_create
    function has a builtin default timeout of 60 seconds.  This could result
    in a long delay when a server in a replicated mount setup is down.
  - For non-replicated server entries, ping a host before attempting to mount.
    (Ian Kent)
  - Change to %configure.
  - Put version-release into .version to allow for automount --version to
    print exact info.
  - Nuke my get-best-mount patch which always uses the long timeout.  This
    should no longer be needed.
  - Put name into changelog entries to make them consistent.  Add e:n-v-r
    into Florian's entry.
  - Stop autofs before uninstalling


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-8
changelog:
  - Change icmp ping to an rpc ping.  (Ian Kent)
  - Fix i18n patch
    o Remove the extra \" from one echo line.
    o Use echo -e if we are going to do a \n in the echo string.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-10
changelog:
  - Add bad chdir patch from Ian Kent.
  - Add a typo fix for the mtab lock file.
  - Nuke the stripdash patch.  It didn't solve a problem.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-11
changelog:
  - Add beta map expiry code for wider testing. (Ian Kent)
  - Fix check for ghosting option.  I forgot to check for it in DAEMONOPTIONS.
  - Remove STRIPDASH from /etc/sysconfig/autofs


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-12
changelog:
  - Add a sysconfig entry to disable direct map support, and set this to 
    1 by default.
  - Disable the beta map expiry logic so I can build into a stable distro.
  - Add defaults for all of the sysconfig variables to the init script so 
    we don't trip over user errors (i.e. deleting /etc/sysconfig/autofs).


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-13
changelog:
  - Only read one auto.master map (instead of concatenating all found sources).
  - Uncomment Ian's experimental mount expiry patch.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-14
changelog:
  - New map expiry patch from Ian.
  - Fix a couple signal races.  No known problem reports of these, but they
    are holes, none-the-less.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-15
changelog:
  - Fix a socket leak in the rpc_subs, causing mounts to fail since we are 
    running out of port space fairly quickly.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-17
changelog:
  - Add patch to support parsing nsswitch.conf to determine map sources.
  - Disable this patch, and Ian's map expiry patch for a FC build.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-18
changelog:
  - Umount loopback filesystems under automount points when stopping the 
    automounter.
  - Uncomment the map expiry patch.
  - change a close to an fclose in lookup_file.c


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-20
changelog:
  - Merged my and Ian's socket leak fixes into one, smaller patch. Only
    partially addresses bz #128966.
  - Fix some more echo lines for internationalization. bz #77820
  - Revert the only one auto.master patch until we implement the +auto_master
    syntax.  Temporarily addresses bz #133055.


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-27
changelog:
  - Fixed an error in the init script which caused duplicate entries to be
    displayed when asking for autofs status.


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-29
changelog:
  - Fixed a problem with backwards compatability. Specifying local
    maps without '/etc/' prepended to them now works. (bz #136038)


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-32
changelog:
  - Fixed the use of +ypmapname so the maps included with +ypmapname
    are used in the correct order.  (In the past the '+' entries
    were always processed after local entries.)


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-34
changelog:
  - Added a patch to fix the automounter failing on ldap maps
    when it couldn't get the whole map.  (ie. when the search
    limit was lower than the number of results)


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-55
changelog:
  - Fix program maps so that they can have gt 4k characters. (Neil Horman)
    Addresses bz #138994.
  - Add a space after the colon here "Starting automounter:" in init script.
    Fixes bz #138513.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-57
changelog:
  - Pass a socket into clntudp_bufcreate so that we don't use up additional 
    reserved ports.  This patch, along with the socket leak fix, addresses
    bz #128966.


author: <jmoyer@redhat.com> - 1:4.1.3-74
changelog:
  - Add in the map expiry patch
  - Bring in other patches that have been committed to other branches. This 
    version should now contain all fixes we have to date
  - Merge conflicts due to map expiry changes


author: Chris Feist <cfeist@redhat.com> - 1:4.3-80
changelog:
  - Added a variable to determine if we created the directory or not
    so we don't accidently remove a directory that we didn't create when
    we stop autofs.  (bz #134399)


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-90
changelog:
  - Fix potential double free in cache_release.  This bug showed up in a
    multi-map setup.  Two calls to cache_release would result in a SIGSEGV,
    and the automount process would never exit.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-98
changelog:
  - Program maps can repeat the last character of output.  Fix this.  
    Addresses bz #138606
  - Return first entry when there are duplicate keys in a map.  Addresses
    bz #140108.
  - Propagate custom map variables to submounts.  Fixes bz #143074.
  - Create a sysconfig variable to control whether we source only one master
    map (the way sun does), or source all maps found (which is the default for
    backwards compatibility).  Addresses bz #143126.
  - Revised version of the get_best_mount patch. (#146887) cfeist@redhat.com
    The previous patch introduced a regression.  Non-replicated mounts would
    not have the white space stripped from the entry and the mount would fail.
  - Handle comment characters in the middle of the automount line in
    /etc/nsswitch.conf.  Addresses bz #127457.


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-100
changelog:
  - When using ldap if auto.master doesn't exist we now check for auto_master.
    Addresses bz #130079
  - When using an auto.smb map we now remove the leading ':' from the path which
    caused mount to fail in the past.  Addresses bz #147492
  - Autofs now checks /etc/nsswitch.conf to determine in what order files & nis
    are checked when looking up autofs submount maps which don't specify a
    maptype.  Addresses IT #57612.


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-111
changelog:
  - Fixed one off bug in the submount-variable-propagation patch.
    (bz #143074)
  - Fixed a bug in the init script which wouldn't find the -browse
    option if it was preceded by another option. (fz #113494)


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-115
changelog:
  - Fixed regression causing any entries after a wildcard in an
    indirect map to be ignored. (bz #151668).
  - Fixed regression which caused local hosts to be mount instead
    of --bind local directories. (bz #146887)


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-119
changelog:
  - Merge in the multi-over patch.  This resolves an issue whereby multimounts
    (such as those used for /net) could be processed in the wrong order,
    resulting in directories not showing up in a multimount tree.  The fix
    is to process these directories in order, shortest to longer path.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-123
changelog:
  - Add in an error case that was omitted in the multi-over patch.
  - Update our auto.net to reflect the changes that went into 4.1.4_beta2.
    This fixes a problem seen by at least one customer where a malformed entry
    appeared first in the multimount list, thus causing the entire multimount
    to be ignored.  This new auto.net places that entry at the end, purely by
    luck, but it fixes the problem in this one case.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-4
changelog:
  - Finish up with the merge breakage.
  - Temporary fix for the multimount detection code.  It seems half-baked.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-6
changelog:
  - Fix a race between mounting a share and updating the cache in the parent
    process.  If the mount completed first, the parent would not expire the
    stale entry, leaving it first on the list.  This causes map updates to not
    be recognized (well, worse, they are recognized after the first expire, but
    not subsequent ones).  Fixes a regression, bug #137026 (rhel3 bug).


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-7
changelog:
  - I reversed the checking for multimount entries, breaking those configs!
    This update puts the code back the way it was before I broke it.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-8
changelog:
  - Add in the deferred syslog patch.  This fixes a hung automounter issue
    related to unsafe calls to syslog in signal handler context.


author: <jmoyer@redhat.com> - 1:4.1.4-10
changelog:
  - Fix some bugs in the parser
  - allow -net instead of /etc/auto.net
  - Fix a buffer overflow with large key lengths
  - Don't allow autofs to unlink files, only to remove directories
  - change to the upstream reentrant syslog patch from the band-aid deferred
    syslog patch.
  - Get rid of the init script patch that hard-coded the release to redhat.
    This should be handled properly by all red hat distros.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-12
changelog:
  - The sort command no longer accepts options of the form "+0".  This broke
    auto.net, so the option was removed.  Fixes bz #172111.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-14
changelog:
  - Removed the /misc entry from the default auto.master.  auto.misc has
    an entry for the cdrom device, and the preferred method of mounting the
    cd is via udev/hal.


author: Ian Kent <ikent@redhat.com> - 1:4.1.4-16
changelog:
  - Replace check-is-multi with more general multi-parse-fix.
  - Add fix for premature return when waiting for lock file.
  - Update copyright declaration for reentrant-syslog source.
  - Add patch for configure option to disable locking during mount.
    But don't disable locking by default.
  - Add ability to handle automount schema used in Sun directory server.
  - Quell compiler warning about getsockopt parameter.
  - Quell compiler warning about yp_order parameter.


author: Ian Kent <ikent@redhat.com> - 1:4.1.4-18
changelog:
  - Add patch to allow customization of arguments to the
    autofs-ldap-auto-master program (bz #187525).
  - Add patch to escap "#" characters in exports from auto.net
    program mount (bz#178304).


author: Ian Kent <ikent@redhat.com> - 1:4.1.4-20
changelog:
  - add patch to use "cifs" instead of smbfs and escape speces
    in share names (bz #163999, #187732).


author: Ian Kent <ikent@redhat.com> - 1:4.1.4-23
changelog:
  - add patch to ignore the "bg" and "fg" mount options as they
    aren't relevant for autofs mounts (bz #184386).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta3-1
changelog:
  - update source to version 5.0.0_beta3.
  - add patch to remove extra debug print.
  - add patch to
    - fix memory alloc error in nis lookup module.
    - add "_" to "." mapname translation to nis lookup module.
  - add patch to add owner pid to mount list struct.
  - add patch to disable NFSv4 when probing hosts (at least foe now).
  - add patch to fix white space handling in replicated server selection code.
  - add patch to prevent striping of debug info macro patch (Jeff Moyer).
  - add patch to add sanity checks on rmdir_path and unlink (Jeff Moyer).
  - add patch to fix e2fsck error code check (Jeff Moyer).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta3-3
changelog:
  - update hesiod module (Jeff Moyer).
    - add mutex to protect against overlapping mount requests.
    - update return from mount request to give more sensible NSS_*
      values.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta3-6
changelog:
  - add back test for nested mount in program map lookup.
    - I must have commented this out for a reason. I guess we'll
      find out soon enough.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-2
changelog:
  - re-instate v4 directory cleanup (bz# 193832 again).
  - backout master map lookup changes made to beta3.
  - change default master map from /etc/auto.master to auto.master
    so that we always use nsswitch to locate master map.
  - change default installed master map to include "+auto.master"
    to pickup NIS master map (all bz# 193831 again).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-4
changelog:
  - check base of offset mount tree is not a mount before umounting
    its offsets.
  - fix replicated mount parse for case where last name in list
    fails lookup.
  - correct indirect mount expire broken by the wildcard lookup fix.
  - fix up multi-mount handling when wildcard map entry present.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-6
changelog:
  - add free for working var in get_default_logging.
  - add inialisation for kver in autofs_point struct.
  - fix sources list corruption in check_update_map_sources.
  - fix memory leak in walk_tree.
  - fix memory leak in rpc_portmap_getport and rpc_ping_proto.
  - fix memory leak in initialisation of lookup modules.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-8
changelog:
  - fix handling of master map entry update (bz # 193718).
  - fix program map handling of invalid multi-mount offsets.


author: Jeff Moyer <jmoyer@redhat.com> - 5.0.0_beta4-12
changelog:
  - Change BuildPrereq to BuildRequires as per the package guidelines.
  - Add libxml2-devel to the BuildRequires, as it is needed for the LDAP
    authentication bits.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-13
changelog:
  - Change LDAP message severity from crit to degug (bz# 183893).
  - Corrections to INSTALL and README.v5.release.
  - Add patch to fix segv on overlength map keys in file maps (Jeff Moter).
  - Add patch to restrict scanning of /proc to pid directories only (Jeff Moyer).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta5-3
changelog:
  - lookup_init cleanup and fix missed memory leak.
  - use nis map order to check if update is needed.
  - fix couple of memory leaks in lookup_yp.c.
  - fix pasre error in replicated server module.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta5-4
changelog:
  - correct spelling error in default config.
  - fix default auth config not being installed.
  - change LDAP query method as my test db was incorrect.
  - change ldap defaults code to handle missing auth config.
  - fix mistake in parsing old style LDAP specs.
  - update LDAP so that new query method also works for old syntax.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta5-5
changelog:
  - allow global macro defines to override system macros.
  - correct spelling error in default config files missed by
    previous update.
  - misc correctness and a memory leak fix.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta6-1
changelog:
  - consolidate to beta6, including:
    - mode change update for config file.
    - correction to get_query_dn fix from beta5-4.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta6-2
changelog:
  - merge LDAP authentication update for GSSAPI (Jeff Moyer).
  - update default auth config to add options documenetation (Jeff Moyer).
  - workaround segfaults at exit after using GSSAPI library.
  - fix not checking return in init_ldap_connection (jeff Moyer).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta6-7
changelog:
  - correct directory cleanup in mount modules.
  - merge key and wildcard LDAP query for lookups (bz 197746).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.6
changelog:
  - cthon more parser corrections and attempt to fix multi-mounts
    with various combinations of submounts (still not right).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.14
changelog:
  - remove SIGCHLD handler because it is no longer needed and was
    causing expire problems.
  - alter expire locking of multi-mounts to lock sub-tree instead of
    entire tree.
  - review verbose message feedback and update.
  - correction for expire of multi-mounts.
  - spelling corrections to release notes (Jeff Moyer).
  - add back sloppy mount option, removed for Connectathon testing.
  - disable mtab locking again.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.15
changelog:
  - expire individual submounts.
  - add ino_index locking.
  - fix nested submount expiring away when pwd is base of submount.
  - more expire re-work to cope better with shutdown following cthon tests.
  - allow hostname to start with numeric when validating.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.16
changelog:
  - fix included map lookup.
  - fix directory cleanup on expire.
  - fix task cancelation at shutdown.
  - fix included map wild card key lookup.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.17
changelog:
  - fix task cancelation at shutdown (more)
  - fix concurrent mount and expire race with nested submounts.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.1
changelog:
  - consolidate to rc2.
  - fix colon escape handling.
  - fix recusively referenced bind automounts.
  - update kernel patches.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.5
changelog:
  - fix LDAP lookup delete cache entry only if entry doesn't exist.
  - add missing socket close in replicated host check (Jeff Moyer).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.7
changelog:
  - make default installed master map for /net use "-hosts" instead
    of auto.net.
  - fix included map recursive map key lookup.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.10
changelog:
  - fix get_query_dn not looking in subtree for LDAP search.
  - allow syntax "--timeout <secs>" for backward compatibility
    (bz 193948).
  - make masked_match independent of hostname for exports comparison
    (bz 209638).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.11
changelog:
  - fix file handle leak in nsswitch parser (bz 207678).
  - fix memory leak in mount and expire request processing (bz 207678).
  - add additional check to prevent running of cancelled tasks.
  - fix potential file handle leakage in rpc_subs.c for some failure
    cases (bz 207678).
  - fix file handle leak in included map lookup (bz 207678).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.12
changelog:
  - fix "-fstype=nfs4" server probing (part 2 of bz 208757).
  - set close-on-exec flag on open files where possible (bz 207678).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.16
changelog:
  - fix get_query_dn not looking in subtree for LDAP search (missed
    econd occurance).
  - allow additional common LDAP attributes in map dn.
  - Resolves: rhbz#205997


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.20
changelog:
  - Update patch for changed semantics of mkdir in recent kernels.
  - fix macro table locking (bz 208091).
  - fix nsswitch parser locking (bz 208091).
  - allow only one master map read task at a time.
  - fix misc memory leaks.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.21
changelog:
  - mitigate manual umount of automounts where possible.
  - fix multiply recursive bind mounts.
  - check kernel module version and require 5.00 or above.
  - fix expire regression introduced in the "mitigate manual umount" patch.
  - still more on multiply recursive bind mounts.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.23
changelog:
  - fix tokenizer to distinguish between global option and dn string (bz 214684).
  - fix incorrect return from spawn.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.26
changelog:
  - fix parsing of bad mount mount point in master map (bz 215620).
  - fix use after free memory access in cache.c and lookup_yp.c (bz 208091).
  - eliminate use of pthread_kill to detect task completion (bz 208091).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.29
changelog:
  - alter nfs4 host probing to not use portmap lookup and add options
    check for "port=" parameter (bz 208757).
  - correct semantics of "-null" map handling (bzs 214800, 208091).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.33
changelog:
  - expand export access checks to include missing syntax options.
  - make "-hosts" module try to be sensitive to exports list changes.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.34
changelog:
  - change mount "device" from "automount" to the map name.
  - check for buffer overflow in mount_afs.c.
  - replace tempnam with mkdtemp.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.38
changelog:
  - update master map tokenizer to admit "slasify-colons" option.
  - update location validation to accept "_" (bz 219445).
  - set close-on-exec flag on open sockets (bz 215757).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.41
changelog:
  - fix nonstrict multi-mount handling (bz 219383).
  - correct detection of duplicate indirect mount entries (bz 220799).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.5
changelog:
  - remove fullstop from Summary tag.
  - change Buildroot to recommended form.
  - replace Prereq with Requires.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.13
changelog:
  - make double quote handing consistent (at least as much as we can).
  - fix handling of trailing white space in wildcard lookup (forward port bz 199720).
  - check fqdn of each interface when matching export access list (bz 213700).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.17
changelog:
  - make use of spaces and tabs in spec file consistent.
  - escape embedded macro text in %changelog.
  - eliminate redundant %version and %release.
  - remove redundant conditional check from %clean.
  - remove redundant exit from %preun.
  - correct %defattr spec.
  - remove empty %doc and redundant %dir misc lines.
  - combine program module spec lines into simpler one line form.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.18
changelog:
  - update the "task done race" patch to fix a deadlock.
  - added URL tag.
  - removed obsoletes autofs-ldap.
  - replaced init directory paths with %{_initrddir} macro.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.24
changelog:
  - add "condrestart" to init script (bz 228860).
  - add "@network" and .domain.name export check.
  - fix display map name in mount entry for "-hosts" map.


author: Ian Kent <ikent@redhat.com> - 5.0.1-1
changelog:
  - update to release tar.
  - fix return check for getpwuid_r and getgrgid_r.
  - patch to give up trying to update exports list while host is mounted.
  - fix to "@network" matching. 
  - patch to check for fstab update and retry if not updated.


author: Ian Kent <ikent@redhat.com> - 5.0.1-5
changelog:
  - drop "DEFAULT_" prefix from configuration names.
  - add option to select replicated server at random (instead of
    ping response time) (bz 227604).
  - fix incorrect cast in directory cleanup routines (bz 231864).


author: Ian Kent <ikent@redhat.com> - 5.0.1-6
changelog:
  - fix directory creation for browse mounts.
  - fix wildcard map handling and improve nsswitch source map update.


author: Ian Kent <ikent@redhat.com> - 5.0.1-8
changelog:
  - add configuration variable to control appending of global options (bz 214684).
  - add command option to set a global mount options string (bz 214684).


author: Ian Kent <ikent@redhat.com> - 5.0.1-9
changelog:
  - upstream fix for filesystem is local check.
  - disable exports access control check (bz 203277).
  - fix patch to add command option for set a global mount options (bz 214684).


author: Ian Kent <ikent@redhat.com> - 5.0.1-16
changelog:
  - add ldaps support.
    - note: it's no longer possible to have multiple hosts in an ldap map spec.
    - note: to do this you need to rely on the ldap client config.


author: Ian Kent <ikent@redhat.com> - 5.0.2-2
changelog:
  - include krb5.h in lookup_ldap.h (some openssl doesn't implicitly include it).
  - correct initialization of local var in parse_server_string.


author: Ian Kent <ikent@redhat.com> - 5.0.2-5
changelog:
  - fix mount point directory creation for bind mounts.
  - add quoting for exports gathered by hosts map.


author: Ian Kent <ikent@redhat.com> - 5.0.2-10
changelog:
  - mark map instances stale so they aren't "cleaned" during updates.
  - fix large file compile time option.


author: Ian Kent <ikent@redhat.com> - 5.0.2-11
changelog:
  - don't fail on empty master map.
  - add support for the "%" hack for case insensitive attribute schemas.


author: Ian Kent <ikent@redhat.com> - 5.0.2-14
changelog:
  - update patch to prevent failure on empty master map.
  - if there's no "automount" entry in nsswitch.conf use "files" source.
  - add LDAP schema discovery if no schema is configured.


author: Ian Kent <ikent@redhat.com> - 5.0.2-16
changelog:
  - add descriptive comments to config about LDAP schema discovery.
  - work around segfault at exit caused by libxml2.
  - fix foreground logging (also fixes shutdown needing extra signal bug).


author: Ian Kent <ikent@redhat.com> - 5.0.2-18
changelog:
  - fix schema selection in LDAP schema discovery.
  - check for "*" when looking up wildcard in LDAP.
  - fix couple of edge case parse fails of timeout option.
  - add SEARCH_BASE configuration option.
  - add random selection as a master map entry option.
  - re-read config on HUP signal.
  - add LDAP_URI, LDAP_TIMEOUT and LDAP_NETWORK_TIMEOUT configuration options.
  - fix deadlock in submount mount module.
  - fix lack of ferror() checking when reading files.
  - fix typo in autofs(5) man page.
  - fix map entry expansion when undefined macro is present.
  - remove unused export validation code.
  - add dynamic logging (adapted from v4 patch from Jeff Moyer).
  - fix recursive loopback mounts (Matthias Koenig).
  - add map re-load to verbose logging.
  - fix handling of LDAP base dns with spaces.
  - handle MTAB_NOTUPDATED status return from mount.
  - when default master map, auto.master, is used also check for auto_master.
  - update negative mount timeout handling.
  - fix large group handling (Ryan Thomas).
  - fix for dynamic logging breaking non-sasl build (Guillaume Rousse).
  - eliminate NULL proc ping for singleton host or local mounts.


author: Ian Kent <ikent@redhat.com> - 5.0.2-21
changelog:
  - Bug 421371: CVE-2007-5964 autofs defaults don't restrict suid in /net [rawhide]
    - use mount option "nosuid" for "-hosts" map unless "suid" is explicily specified.


author: Ian Kent <ikent@redhat.com> - 5.0.2-23
changelog:
  - Bug 397591 SELinux is preventing /sbin/rpc.statd (rpcd_t) "search" to <Unknown> (sysctl_fs_t).
    - prevent fork between fd open and setting of FD_CLOEXEC.


author: Ian Kent <ikent@redhat.com> - 5.0.2-25
changelog:
  - Bug 426401: CVE-2007-6285 autofs default doesn't set nodev in /net [rawhide]
    - use mount option "nodev" for "-hosts" map unless "dev" is explicily specified.


author: Ian Kent <ikent@redhat.com> - 5.0.3-3
changelog:
  - catch "-xfn" map type and issue "no supported" message.
  - another correction for handling of LDAP base dns with spaces.


author: Ian Kent <ikent@redhat.com> - 5.0.3-4
changelog:
  - correction to the correction for handling of LDAP base dns with spaces.
  - avoid using UDP for probing NFSv4 mount requests.
  - use libldap instead of libldap_r.


author: Ian Kent <ikent@redhat.com> - 5.0.3-6
changelog:
  - fix expire calling kernel more often than needed.
  - fix unlink of mount tree incorrectly causing autofs mount fail.
  - add miscellaneous device node interface library.
  - use miscellaneous device node, if available, for active restart.
  - device node and active restart fixes.
  - update is_mounted to use device node ioctl, if available.


author: Ian Kent <ikent@redhat.com> - 5.0.3-8
changelog:
  - revert miscellaneous device node related patches.
  - add missing check for zero length NIS key.
  - fix incorrect match of map type name when included in map name.
  - update rev 7 sasl callbacks patch.


author: Ian Kent <ikent@redhat.com> - 5.0.3-18
changelog:
  - don't abuse the ap->ghost field on NFS mount.
  - multi-map doesn't pickup NIS updates automatically.
  - eliminate redundant DNS name lookups.
  - mount thread create condition handling fix.
  - allow directory create on NFS root.
  - check direct mount path length.
  - fix incorrect in check in get user info.
  - fix a couple of memory leaks.


author: Ian Kent <ikent@redhat.com> - 5.0.3-21
changelog:
  - add upstream bug fix patches
    - add command line option to override is running check.
    - don't use proc fs for is running check.
    - fix fail on included browse map not found.
    - fix incorrect multi source messages.
    - clear stale flag on map read.
    - fix proximity other rpc ping timeout.
    - refactor mount request vars code.
    - make handle_mounts startup condition distinct.
    - fix submount shutdown handling.
    - try not to block on expire.
    - add configuration paramter UMOUNT_WAIT.
    - fix multi mount race.
    - fix nfs4 colon escape handling.
    - check replicated list after probe.
    - add replicated server selection debug logging.
    - update replicated server selection documentation.
    - use /dev/urandom instead of /dev/random.
    - check for mtab pointing to /proc/mounts.
    - fix interface config buffer size.
    - fix percent hack heap corruption.


author: Ian Kent <ikent@redhat.com> - 5.0.3-23
changelog:
  - add upstream bug fixes
    - bug fix for mtab check.
    - bug fix for zero length nis key.
    - update for ifc buffer handling.
    - bug fix for kernel automount handling.
  - warning: I found a bunch of patches that were present but not
    being applied.


author: Ian Kent <ikent@redhat.com> - 5.0.3-25
changelog:
  - fix fd leak at multi-mount non-fatal mount fail.
  - fix incorrect multi-mount mountpoint calcualtion.


author: Ian Kent <ikent@redhat.com> - 5.0.3-26
changelog:
  - add map-type-in-map-name fix patch to sync with upstream and RHEL.
  - don't readmap on HUP for new mount.
  - add NIS_PARTIAL to map entry not found check and fix use after free bug.


author: Ian Kent <ikent@redhat.com> - 5.0.3-28
changelog:
  - don't close file handle for rootless direct mounti-mount at mount.
  - wait submount expire thread completion when expire successful.
  - add inadvertantly ommitted server list locking in LDAP module.


author: Ian Kent <kent@redhat.com> - 5.0.3-30
changelog:
  - fix segv during library re-open.
  - fix incorrect pthreads condition handling for expire requests.
  - fix master map lexer eval order.
  - fix bad alloca usage.


author: Ian Kent <kent@redhat.com> - 5.0.4-5
changelog:
  - fix negative caching of non-existent keys.
  - fix ldap library detection in configure.
  - use CLOEXEC flag functionality if present.
  - fix select(2) fd limit.
  - make hash table scale to thousands of entries.


author: Ian Kent <ikent@redhat.com> - 5.0.4-8
changelog:
  - rename program map parsing bug fix patch.
  - use CLOEXEC flag functionality for setmntent also, if present.


author: Ian Kent <ikent@redhat.com> - 5.0.4-9
changelog:
  - fix hosts map use after free.
  - fix uri list locking (again).
  - check for stale SASL credentials upon connect fail.
  - add "forcestart" and "forcerestart" init script options to allow
    use of 5.0.3 strartup behavior if required.
  - always read entire file map into cache to speed lookups.
  - make MAX_ERR_BUF and PARSE_MAX_BUF use easier to audit.
  - make some easy alloca replacements.
  - update to configure libtirpc if present.
  - update to provide ipv6 name and address support.
  - update to provide ipv6 address parsing.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-15
changelog:
  - fix array out of bounds accesses and cleanup couple of other alloca() calls.
  - Undo mistake in copy order for submount path introduced by rev 11 patch.
  - add check for alternate libxml2 library for libxml2 tsd workaround.
  - add check for alternate libtirpc library for libtirpc tsd workaround.
  - cleanup configure defines for libtirpc.
  - add WITH_LIBTIRPC to -V status report.
  - add libtirpc-devel to BuildRequires.
  - add nfs mount protocol default configuration option.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-21
changelog:
  - fix file map lookup when reading included or nsswitch sources.
    - a regression introduced by file map lookup optimisation in rev 9.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-26
changelog:
  - fix lsb init script header.
  - fix memory leak reading ldap master map.
  - fix st_remove_tasks() locking.
  - reset flex scanner when setting buffer.
  - zero s_magic is valid.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-28
changelog:
  - use intr option as hosts mount default.
  - sync kernel includes with upstream kernel.
  - dont umount existing direct mount on master re-read.
  - fix incorrect shutdown introduced by library relaod fixes.
  - improve manual umount recovery.
  - dont fail on ipv6 address when adding host.
  - always read file maps multi map fix.
  - always read file maps key lookup fixes.
  - add support for LDAP_URI="ldap:///<domain db>" SRV RR lookup.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-30
changelog:
  - fix incorrect dclist free.
  - srv lookup handle endianness.
  - fix bug introduced by library reload changes which causes autofs to
    not release mount thread resources when using submounts.
  - fix notify mount message path.
  - try harder to work out if we created mount point at remount.
  - fix double free in do_sasl_bind().
  - manual umount recovery fixes.
  - fix map type info parse error.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-32
changelog:
  - fix an RPC fd leak.
  - don't block signals we expect to dump core.
  - fix pthread push order in expire_proc_direct().


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-39
changelog:
  - fix libxml2 non-thread-safe calls.
  - fix direct map cache locking.
  - fix patch "dont umount existing direct mount on reread" deadlock.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-1
changelog:
  - update source to latest upstream version.
    - this is essentially a consolidation of the patches already in this rpm.
  - add dist tag to match latest RHEL-5 package tag format.


author: Ian Kent <kent@redhat.com> - 1:5.0.5-2
changelog:
  - fix included map read fail handling.
  - refactor ldap sasl authentication bind to eliminate extra connect
    causing some servers to reject the request. 
  - add mount wait parameter to allow timeout of mount requests to
    unresponsive servers.
  - special case cifs escape handling.
  - fix libxml2 workaround configure.
  - more code analysis corrections (and fix a typo in an init script).
  - fix backwards #ifndef INET6.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-6
changelog:
  - don't use master_lex_destroy() to clear parse buffer.
  - make documentation for set-log-priority clearer.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-17
changelog:
  - dont connect at ldap lookup module init.
  - fix random selection option.
  - fix disable timeout.
  - fix strdup() return value check.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-22
changelog:
  - fix get query dn failure.
  - fix ampersand escape in auto.smb.
  - add locality as valid ldap master map attribute.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-25.fc14
changelog:
  - make nfs4 default for replicated selection configuration (bz579949).
  - add simple bind authentication option (bz579951).


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-27.fc14
changelog:
  - fix master map source server unavailable handling.
  - add autofs_ldap_auth.conf man page.
  - fix random selection for host on different network.
  - make redhat init script more lsb compliant.
  - don't hold lock for simple mounts.
  - fix remount locking.
  - fix wildcard map entry match.
  - fix parse_sun() module init.
  - dont check null cache on expire.
  - fix null cache race.
  - fix cache_init() on source re-read.
  - fix mapent becomes negative during lookup.
  - check each dc server individually.
  - fix negative cache included map lookup.
  - remove state machine timed wait.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-28
changelog:
  - remove extra read master map call.
  - remove extra cache create call in master_add_map_source().
  - fix error handing in do_mount_indirect().
  - expire thread use pending mutex.
  - explicity link against the Kerberos library.
  - remove some log message duplication for verbose logging.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-32.fc15
changelog:
  - always read file maps mount lookup map read fix.
  - fix direct map not updating on reread.
  - add external bind method.
  - fix add simple bind auth.
  - add option to dump configured automount maps.
  - wait for master map to be available at start.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-36
changelog:
  - use weight only for server selection.
  - fix isspace() wild card substition.
  - auto adjust ldap page size.
  - fix prune cache valid check.
  - fix mountd vers retry.
  - fix expire race.
  - add lsb force-reload and try-restart.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-3
changelog:
  - improve mount location error reporting.
  - fix paged query more results check.
  - fix dumpmaps not reading maps.
  - fix result null check in read_one_map().
  - Fix LDAP result leaks on error paths.
  - code analysis fixes 1.
  - fix not bind mounting local filesystem.
  - update dir map-type patch for changed patch order.
  - fix wait for master source mutex.
  - fix submount shutdown race
  - fix fix map source check in file lookup.
  - add disable move mount configure option.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-5
changelog:
  - fix ipv6 name lookup check.
  - fix ipv6 rpc calls.
  - fix ipv6 configure check.
  - add piddir to configure.
  - add systemd unit support.
  - fix MNT_DETACH define.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-9
changelog:
  - add correct patch for "fix improve mount location error reporting".
  - add correct patch for "fix fix wait for master source mutex".


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-12
changelog:
  - ignore duplicate exports in auto.net.
  - add kernel verion check function.
  - add function to check mount.nfs version.
  - reinstate singleton mount probe.
  - rework error return handling in rpc code.
  - catch EHOSTUNREACH and bail out early.
  - systemd support fixes.
  - fix segmentation fault in do_remount_indirect().


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-15
changelog:
  - fix typo in libtirpc file name.
  - fix rework error return handling in rpc code.
  - allow MOUNT_WAIT to override probe.
  - improve UDP RPC timeout handling.
  - fix segfault in get_query_dn().
  - use strtok_r() in linux_version_code().
  - fix sss wildcard match.
  - fix dlopen() error handling in sss module.
  - fix configure string length tests for sss library.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-21
changelog:
  - fix fix LDAP result leaks on error paths.
  - report map not read when debug logging.
  - duplicate parent options for included maps.
  - update ->timeout() function to not return timeout.
  - move timeout to map_source.
  - fix kernel verion check of version components.
  - dont retry ldap connect if not required.
  - check if /etc/mtab is a link to /proc/self/mounts.
  - fix nfs4 contacts portmap.
  - make autofs wait longer for shutdown.
  - fix sss map age not updated.
  - fix remount deadlock.
  - fix umount recovery of busy direct mount.
  - fix offset mount point directory removal.
  - remove move mount code and configure option.
  - fix remount of multi mount.
  - fix devce ioctl alloc path check.
  - refactor hosts lookup module.
  - remove cache update from parse_mount().
  - add function to delete offset cache entry.
  - allow update of multi mount offset entries.
  - add hup signal handling to hosts map.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-21
changelog:
  - fix systemd argument passing.
  - fix get_nfs_info() can incorrectly fail.
  - fix offset directory removal.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-3
changelog:
  - fix nobind sun escaped map entries.
  - fix use cache entry after free mistake.
  - fix ipv6 proximity calculation.
  - fix parse buffer initialization.
  - fix typo in automount(8).


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-4
changelog:
  - include usage in usage message.
  - dont wait forever to restart.
  - add option description to man page.
  - fix null map entry order handling.
  - make description of default MOUNT_WAIT setting clear.
  - configure.in: allow cross compilation.
  - README: update mailing list subscription info.
  - allow non root user to check status.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-6
changelog:
  - fix recursive mount deadlock.
  - increase file map read buffer size.
  - handle new location of systemd.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-8
changelog:
  - fix map entry duplicate offset detection.
  - Allow nsswitch.conf to not contain "automount:" lines.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-10
changelog:
  - fix submount offset delete.
  - fix init script status return.
  - fix use get_proximity() without libtirpc.
  - don't use dirent d_type to filter out files in scandir().
  - don't schedule new alarms after readmap.
  - use numeric protocol ids instead of protoent structs.
  - lib/defaults.c: use WITH_LDAP conditional around LDAP types.
  - make yellow pages support optional.
  - modules/replicated.c: use sin6_addr.s6_addr32.
  - workaround missing GNU versionsort extension.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-12
changelog:
  - dont fail on master map self include.
  - fix wildcard multi map regression.
  - fix file descriptor leak when reloading the daemon.
  - depricate nosymlink pseudo option.
  - add symlink pseudo option.
  - update kernel include files.
  - fix requires in spec file.
  - fix libtirpc build option.
  - fix systemd unidir in spec file.
  - document browse option in man page.
  - fix automounter support on parisc.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-16
changelog:
  - make dump maps check for duplicate indirect mounts (bz961312).
  - document allowed map sources in auto.master(5) (bz961312).
  - add enable sloppy mount option to configure.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-20
changelog:
  - fix master map mount options matching.
  - fix master map bogus keywork match.
  - fix fix map entry duplicate offset detection.
  - add a number of fixes based on a Covarity report.


author: Ian Kent <ikent@redhat.com> - 1:5.0.8-3
changelog:
  - fix undefined authtype_requires_creds err if ldap enabled but without sasl.
  - fix master map type check.
  - fix task manager not getting signaled.


author: Ian Kent <ikent@redhat.com> - 1:5.0.8-4
changelog:
  - allow --with-systemd to take a path arg.
  - fix WITH_LIBTIRPC function name.
  - fix ipv6 libtirpc getport (bz1033918).


author: Ian Kent <ikent@redhat.com> - 1:5.0.8-5
changelog:
  - fix ipv6 link local address handling.
  - fix fix ipv6 libtirpc getport.
  - get_nfs_info() should query portmapper if port is not given.
  - fix rpc_portmap_getport() proto not set.


author: Ian Kent <ikent@redhat.com> - 1:5.1.0-0.beta1.1
changelog:
  - amd lookup update lookup ldap to handle amd keys
    - inadvertantly drop from initial series.
  - amd lookup update lookup hesiod to handle amd keys
    - inadvertantly drop from initial series.
  - fix wildcard key lookup.
  - check for non existent negative entries in lookup_ghost().


author: Ian Kent <ikent@redhat.com> - 1:5.1.0-1
changelog:
  - update to upstream release, 5.1.0.
    - fix reset flex scan buffer on init.
    - fix fix negative status being reset on map read.
    - fix out of order amd timestamp lookup.
    - fix ldap default schema config.
    - fix ldap default master map name config.
    - fix map format init in lookup_init().
    - fix incorrect max key length in defaults get_hash().
    - fix xfn sets incorrect lexer state.
    - fix old style key lookup.
    - fix expire when server not responding.
    - fix ldap_uri config update.
    - fix typo in conf_load_autofs_defaults().
    - fix hash on confg option add and delete.
    - add plus to path match pattern.
    - fix multi entry ldap option handling.
    - cleanup options in amd_parse.c.
    - allow empty value for some map options.
    - allow empty value in macro selectors.


author: Ian Kent <ikent@redhat.com> - 1:5.1.0-3
changelog:
  - fix compile error in defaults.c.
  - add serialization to sasl init.
  - dont allocate dev_ctl_ops too early.
  - fix incorrect round robin host detection.
  - fix race accessing qdn in get_query_dn().
  - fix leak in cache_push_mapent().
  - fix config entry read buffer not checked.
  - fix FILE pointer check in defaults_read_config().
  - fix memory leak in conf_amd_get_log_options().
  - fix signed comparison in inet_fill_net().
  - fix buffer size checks in get_network_proximity().
  - fix leak in get_network_proximity().
  - fix buffer size checks in merge_options().
  - check amd lex buffer len before copy.
  - add return check in ldap check_map_indirect().
  - check host macro is set before use.
  - check options length before use in parse_amd.c.
  - fix some out of order evaluations in parse_amd.c.
  - fix copy and paste error in dup_defaults_entry().


author: Ian Kent <ikent@redhat.com> - 1:5.1.0-7
changelog:
  - force disable browse mode for amd format maps.
  - fix hosts map options check in lookup_amd_instance().
  - fix memory leak in create_client().
  - fix memory leak in get_exports().
  - fix memory leak in get_defaults_entry().
  - fix out of order clearing of options buffer.
  - fix reset amd lexer scan buffer.
  - ignore multiple commas in options strings.
  - fix typo in flagdir configure option.
  - clarify multiple mounts description.
  - gaurd against incorrect umount return.
  - update man page autofs(8) for systemd.
  - remove ancient kernel Requires.


author: Ian Kent <ikent@redhat.com> - 1:5.1.0-9
changelog:
  - fix custom autofs.conf not being installed.
  - init qdn before use in get_query_dn().
  - fix typo in update_hosts_mounts().
  - fix hosts map update on reload.


author: Ian Kent <ikent@redhat.com> - 1:5.1.0-10
changelog:
  - make negative cache update consistent for all lookup modules.
  - ensure negative cache isn't updated on remount.
  - dont add wildcard to negative cache.
  - make service want network-online (bz1071591).


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-5
changelog:
  - actually apply fix use after free in do_master_list_reset().
  - fix deadlock in dumpmaps.
  - fix rpcgen dependency problem.


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-6
changelog:
  - dont use array for path when not necessary.
  - fix prefix option handling in expand_entry().
  - fix sublink option not set from defaults.
  - fix error return in do_nfs_mount().


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-7
changelog:
  - add error handling for ext_mount_add().
  - account for recent libnsl changes.
  - use_hostname_for_mounts shouldn't prevent selection among replicas.
  - fix monotonic_elapse.
  - Makefiles.rules: remove 'samples' from SUBDIRS.


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-12
changelog:
  - dont allow trailing slash in master map mount points.
  - fix libresolv configure check.
  - add fedfs-getsrvinfo.c.
  - add mount.fedfs.c.
  - add fedfs-map-nfs4.c
  - add conditional inclusion of fedfs binaries.
  - add an example fedfs master map entry to the installed master map.


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-16
changelog:
  - tiny patch for autofs typo and possible bug.
  - add units After line to include statd service.
  - use systemd sd_notify() at startup.
  - add "BuildRequires: systemd-devel".
  - fix NFS version mask usage.
  - fix incorrect date in changelog.


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-17
changelog:
  - bz1577700 - automount leaves FDs in half-open state
    - fix fd leak in rpc_do_create_client().
  - Resolves: rhbz#1577700


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-18
changelog:
  - bz1593492 - Ignore trailing slashes at the end of executable maps in
    auto.master config file
    - add-man page note about extra slashes in paths
  - Resolves: rhbz#1593492


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-19
changelog:
  - bz1602447 - Please review important issues found by covscan in
    "autofs-5.1.4-18.el8+7"
    - covarity fixes.
  -Resolves: rhbz#1602447


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-20
changelog:
  - bz1612565 - Man page scan results for autofs
    - fix program usage message.
  - Resolves: rhbz#1612565


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-21
changelog:
  - bz1611866 - autofs reload is unable to activate new map entries,
    it is autofs restart which shows new map entries.
    - fix update_negative_cache() map source usage.
  - bz1613621 - [autofs]Removed entries still can be accessed
    - mark removed cache entry negative.
  - Resolves: rhbz#1611866 rhbz#1613621


author: Ian Kent <ikent@redhat.com> - 5.1.4-22
changelog:
  - bz1613630 - On Red Hat 7.x systems if you try to access local
    filesystems using the automounter through /net then the shell
    and mount could lock up *if* the filesystem your accessing is
    double exported.
    - set bind mount as propagation slave.
    - add master map pseudo options for mount propagation.
  - Resolves: rhbz#1613630


author: Ian Kent <ikent@redhat.com> - 5.1.4-23
changelog:
  - bz1615782 - autofs master map age is incorrectly set
    - fix age setting at startup.
  - Resolves: rhbz#1615782


author: Ian Kent <ikent@redhat.com> - 5.1.4-24
changelog:
  - bz1621938 - autofs can no longer get maps from IPA server
    - fix use after free in parse_ldap_config().
  - Resolves: rhbz#1621938


author: Ian Kent <ikent@redhat.com> - 5.1.4-26
changelog:
  - bz1630190 - yum update hanging while restarting autofs
    - fix incorrect locking in sss lookup.
  - bz1630194 - after upgrading to autofs-5.0.7-83.el7.x86_64 on
    RHEL 7 clients, amd maps /defaults key mount options are no
    longer working
    - fix amd parser opts option handling.
  - Resolves: rhbz#1630190 rhbz#1630194


author: Ian Kent <ikent@redhat.com> - 5.1.4-27
changelog:
  - bz1638487 - Drop dependency on hesiod
    - better handle hesiod support not built in.
    - exclude hesiod support from configure options
    - remove hesiod depends.
  - Resolves: rhbz#1638487


author: Ian Kent <ikent@redhat.com> - 5.1.4-28
changelog:
  - bz1638487 - Drop dependency on hesiod
    - actually update the spec file with the hesiod removal.
  - Related: rhbz#1638487


author: Ian Kent <ikent@redhat.com> - 5.1.4-29
changelog:
  - bz1654541 - autofs crash when parsing master map
    - fix hesiod string check in master_parse().
  - Resolves: rhbz#1654541


author: Ian Kent <ikent@redhat.com> - 5.1.4-30
changelog:
  - bz1689469 - [autofs] The log no longer print PID of automount process
    - remove autofs4 module load code.
    - add NULL check in prepare_attempt_prefix().
    - update build info with systemd.
    - use flags for startup boolean options.
    - move close stdio descriptors to become_daemon().
    - add systemd service command line option.
  - Resolves: rhbz#1689469


author: Ian Kent <ikent@redhat.com> - 5.1.4-31
changelog:
  - bz1689467 - path_resolution on an autofs managed path resets the timer. Can
    this be made configurable?
    - support strictexpire mount option.
  - Resolves: rhbz#1689467


author: Ian Kent <ikent@redhat.com> - 5.1.4-32
changelog:
  - bz1703876 - [RFE] Enable additional logging information for autofs
    - add NULL check for get_addr_string() return.
    - use malloc(3) in spawn.c.
    - add mount_verbose configuration option.
    - optionally log mount requestor process info.
    - log mount call arguments if mount_verbose is set.
  - Resolves: rhbz#1703876


author: Ian Kent <ikent@redhat.com> - 5.1.4-33
changelog:
  - bz1689466 - Sanitize autofs logging
    - make expire remaining log level debug.
  - bz1685805 - autofs doesn't expand macros in amd map selectors
    - allow period following macro in selector value.
    - fix macro expansion in selector values.
  - Resolves: rhbz#1689466 rhbz#1685805


author: Ian Kent <ikent@redhat.com> - 5.1.4-34
changelog:
  - bz1681956 - autofs changes blocked until gating tests are added
    - add gating.yaml for manual gate testing.
  - Related: rhbz#1681956


author: Ian Kent <ikent@redhat.com> - 5.1.4-35
changelog:
  - bz1681956 - autofs changes blocked until gating tests are added
    - correct test name in gating.yaml.
  - Related: rhbz#1681956


author: Ian Kent <ikent@redhat.com> - 5.1.4-36
changelog:
  - bz1743442 - getmntent returns additional "-hosts" entries when
    automounter is used with "hosts" map (userspace part)
    - also use strictexpire for offsets (mounts).
    - change expire type naming to better reflect usage.
    - remove unused function has_fstab_option().
    - remove unused function reverse_mnt_list().
    - remove a couple of old debug messages.
    - fix amd entry memory leak.
    - fix unlink_mount_tree() not umounting mounts.
    - add ignore mount option.
    - use ignore option for offset mounts as well.
    - add config option for "ignore" mount option.
    - use bit flags for autofs mount types in mnt_list.
    - use mp instead of path in mnt_list entries.
    - always use PROC_MOUNTS to make mount lists.
    - add glibc getmntent_r().
    - use local getmntent_r in table_is_mounted().
    - refactor unlink_active_mounts() in direct.c.
    - don't use tree_is_mounted() for mounted checks.
    - use single unlink_umount_tree() for both direct and indirect mounts.
    - move unlink_mount_tree() to lib/mounts.c.
    - use local_getmntent_r() for unlink_mount_tree().
    - use local getmntent_r() in get_mnt_list().
    - use local getmntent_r() in tree_make_mnt_list().
    - fix missing initialization of autofs_point flags.
  - Resolves: rhbz#1743442


author: Ian Kent <ikent@redhat.com> - 5.1.4-37
changelog:
  - bz1660145 - autofs.schema doesn't work in RHEL8
    - update ldap READMEs and schema definitions.
  - Resolves: rhbz#1660145


author: Ian Kent <ikent@redhat.com> - 5.1.4-38
changelog:
  - bz1660145 - autofs.schema doesn't work in RHEL8
    - update spec file doc inclusions for schema definition update.
  - Related: rhbz#1660145


author: Ian Kent <ikent@redhat.com> - 5.1.4-39
changelog:
  - bz1802251 - Autofs will only mount share once if sss is first ini
    nsswitch.conf
    - fix a regression with map instance lookup.
  - Resolves: rhbz#1802251


author: Ian Kent <ikent@redhat.com> - 5.1.4-41
changelog:
  - bz1835547 - [RHEL8]autofs cannot mount samba/cifs shares that end with a
    dollar sign
    - fix trailing dollar sun entry expansion.
  - Resolves: rhbz#1835547


author: Ian Kent <ikent@redhat.com> - 5.1.4-42
changelog:
  - bz1841456 - automount program crashes with "malloc(): invalid next size
    (unsorted)
    - initialize struct addrinfo for getaddrinfo() calls.
    - fix quoted string length calc in expandsunent().
  -Resolves: rhbz#1841456


author: Ian Kent <ikent@redhat.com> - 5.1.4-43
changelog:
  - bz1841456 - automount program crashes with "malloc(): invalid next size
    (unsorted)
    - fix autofs mount options construction.
  -Related: rhbz#1841456


author: Ian Kent <ikent@redhat.com> - 5.1.4-44
changelog:
  - bz1858742 - autofs share doesn't mount when using nobind over RDMA where
    nfs-server and nfs-client are the same systems.
    - mount_nfs.c fix local rdma share not mounting.
  -Resolves: rhbz#1858742


author: Ian Kent <ikent@redhat.com> - 5.1.4-45
changelog:
  - bz1664561 - incorrect of start service command in autofs man page
    - fix incorrect systemctl command syntax in autofs(8).
  -Resolves: rhbz#1664561


author: Ian Kent <ikent@redhat.com> - 5.1.4-46
changelog:
  - bz1664561 - incorrect of start service command in autofs man page
    - actually apply fix patch.
  - fix dates and recent status messages in changelog.
  -Related: rhbz#1664561 rhbz#1858742


author: Ian Kent <ikent@redhat.com> - 5.1.4-47
changelog:
  - bz1887681 - automount force unlink option (-F) does not work as expected
    on autofs-5.0.7-109.el7
    - fix direct mount unlink_mount_tree() path.
    - fix unlink mounts umount order.
    - fix incorrect logical compare in unlink_mount_tree().
    - use bit flag for force unlink mounts.
    - improve force unlink mounts option description.
    - remove logpri fifo on autofs mount fail.
    - add force unlink mounts and exit option.
    - cleanup stale logpri fifo pipes on unlink and exit.
  - Resolves: rhbz#1887681


author: Ian Kent <ikent@redhat.com> - 5.1.4-48
changelog:
  - bz1892184 - autofs: return a connection failure until maps have been fetched
    - fix lookup_nss_read_master() nsswicth check return.
    - fix typo in open_sss_lib().
    - fix sss_master_map_wait timing.
    - add sss ECONREFUSED return handling.
    - use mapname in sss context for setautomntent().
    - add support for new sss autofs proto version call.
    - fix retries check in setautomntent_wait().
    - refactor sss setautomntent().
    - improve sss setautomntent() error handling.
    - refactor sss getautomntent().
    - improve sss getautomntent() error handling.
    - sss introduce calculate_retry_count() function.
    - move readall into struct master.
    - sss introduce a flag to indicate map being read.
    - update sss timeout documentation.
    - refactor sss getautomntbyname().
    - improve sss getautomntbyname() error handling.
    - use a valid timeout in lookup_prune_one_cache().
    - dont prune offset map entries.
    - simplify sss source stale check.
  - Resolves: rhbz#1892184


author: Ian Kent <ikent@redhat.com> - 5.1.4-64
changelog:
  - bz1912106 - Using -hosts option does not resolve host from /etc/hosts and mount
    failes
      - use defines for expire type.
    - remove unused function dump_master().
    - fix additional typing errors.
    - make bind mounts propagation slave by default.
    - fix browse dir not re-created on symlink expire.
      - update list.h.
    - add hashtable implementation.
    - change mountpoint to mp in struct ext_mount.
    - make external mounts independent of amd_entry.
    - make external mounts use simpler hashtable.
    - add a hash index to mnt_list.
    - use mnt_list for submounts.
    - use mnt_list for amdmounts.
    - make umount_autofs() static.
    - remove force parameter from umount_all().
    - fix remount expire.
    - fix stale offset directories disable mount.
    - use struct mnt_list to track mounted mounts.
    - use struct mnt_list mounted list for expire.
    - remove unused function tree_get_mnt_list().
    - only add expre alarm for active mounts.
    - move submount check into conditional_alarm_add().
    - move lib/master.c to daemon/master.c.
    - use master_list_empty() for list empty check.
    - add helper to construct mount point path.
      - add xdr_exports().
    - remove mount.x and rpcgen dependencies.
    - dont use realloc in host exports list processing.
    - use sprintf() when constructing hosts mapent.
    - fix mnts_remove_amdmount() uses wrong list.
    - eliminate cache_lookup_offset() usage.
    - fix is mounted check on non existent path.
    - simplify cache_get_parent().
    - set offset parent in update_offset_entry().
    - remove redundant variables from mount_autofs_offset().
    - remove unused parameter form do_mount_autofs_offset().
    - refactor umount_multi_triggers().
    - eliminate clean_stale_multi_triggers().
    - simplify mount_subtree() mount check.
    - fix mnts_get_expire_list() expire list construction.
    - fix inconsistent locking in umount_subtree_mounts().
    - fix return from umount_subtree_mounts() on offset list delete.
    - pass mapent_cache to update_offset_entry().
    - fix inconsistent locking in parse_mount().
    - remove unused mount offset list lock functions.
    - eliminate count_mounts() from expire_proc_indirect().
    - eliminate some strlen calls in offset handling.
    - don't add offset mounts to mounted mounts table.
    - reduce umount EBUSY check delay.
    - cleanup cache_delete() a little.
    - rename path to m_offset in update_offset_entry().
    - don't pass root to do_mount_autofs_offset().
    - rename tree implementation functions.
    - fix program map multi-mount lookup after mount fail.
    - add some multi-mount macros.
    - remove unused functions cache_dump_multi() and cache_dump_cache().
    - add a len field to struct autofs_point.
    - make tree implementation data independent.
    - add mapent tree implementation.
    - add tree_mapent_add_node().
    - add tree_mapent_delete_offsets().
    - add tree_mapent_traverse_subtree().
    - fix mount_fullpath().
    - add tree_mapent_cleanup_offsets().
    - add set_offset_tree_catatonic().
    - add mount and umount offsets functions.
    - switch to use tree implementation for offsets.
    - remove obsolete functions.
    - remove redundant local var from sun_mount().
    - use mount_fullpath() in one spot in parse_mount().
    - pass root length to mount_fullpath().
    - remove unused function master_submount_list_empty().
    - move amd mounts removal into lib/mounts.c.
    - check for offset with no mount location.
    - remove mounts_mutex.
  - Resolves: rhbz#1912106


author: Ian Kent <ikent@redhat.com> - 5.1.4-65
changelog:
  - bz1912106 - Using -hosts option does not resolve host from /etc/hosts and mount
    failes
    - fix unapplied patch.
    - remove unused variable from get_exports().
  - Related: rhbz#1912106


author: Ian Kent <ikent@redhat.com> - 5.1.4-66
changelog:
  - bz1912106 - Using -hosts option does not resolve host from /etc/hosts and mount
    failes
    - Coverity fixes
      - add missing free in handle_mounts().
      - remove redundant if check.
      - fix possible memory leak in master_parse().
      - fix possible memory leak in mnts_add_amdmount().
      - fix double unlock in parse_mount().
      - add length check in umount_subtree_mounts().
      - fix flags check in umount_multi().
      - dont try umount after stat() ENOENT fail.
      - remove redundant assignment in master_add_amd_mount_section_mounts().
      - fix dead code in mnts_add_mount().
      - fix arg not used in error print.
      - fix missing lock release in mount_subtree().
      - fix double free in parse_mapent().
      - refactor lookup_prune_one_cache() a bit.
      - cater for empty mounts list in mnts_get_expire_list().
      - add ext_mount_hash_mutex lock helpers.
  - Related: rhbz#1912106


author: Ian Kent <ikent@redhat.com> - 5.1.4-67
changelog:
  - bz1954430 - Please, rebuild autofs-5.1.4-66.el8
    - rebuild with fixed binutils.
  - Resolves: rhbz#1954430


author: Ian Kent <ikent@redhat.com> - 5.1.4-68
changelog:
  - bz1958487 - autofs amd mounts present in the configuration get umounted
    on reload
    - fix amd section mounts map reload.
  - bz1958485 - autofs amd type host mounts fail for certain host names
    - fix amd hosts mount expire.
  - Resolves: rhbz#1958487 rhbz#1958485


author: Ian Kent <ikent@redhat.com> - 5.1.4-69
changelog:
  - bz1961492 - autofs: regression in offset ordering
    - fix offset entries order.
    - use mapent tree root for tree_mapent_add_node().
    - eliminate redundant cache lookup in tree_mapent_add_node().
    - fix hosts map offset order.
    - fix direct mount deadlock.
  - Resolves: rhbz#1961492


author: Ian Kent <ikent@redhat.com> - 5.1.4-70
changelog:
  - bz1965862 - A recent Coverity change can cause an infinit loop on map reload
    - fix lookup_prune_one_cache() refactoring change.
  - bz1963129 - auto.master manpage doesn't mention -null or other built-in maps
    - add missing desciption of null map option.
  - Resolves: rhbz#1965862 rhbz#1963129


author: Ian Kent <ikent@redhat.com> - 5.1.4-71
changelog:
  - bz1969210 - autofs: already mounted as other than autofs or failed to unlink
    entry in tree
    - fix empty mounts list return from unlink_mount_tree().
  - Resolves: rhbz#1969210


author: Ian Kent <ikent@redhat.com> - 5.1.4-72
changelog:
  - bz1973025 - /net mount being not cleanly mounted and unmounted
    - fix nonstrict offset mount fail handling.
  - Resolves: rhbz#1973025


author: Ian Kent <ikent@redhat.com> - 5.1.4-73
changelog:
  - bz1973025 - /net mount being not cleanly mounted and unmounted
    - correct patch, fix nonstrict offset mount fail handling.
  - Related: rhbz#1973025


author: Ian Kent <ikent@redhat.com> - 5.1.4-74
changelog:
  - bz1974309 - Removal of default intr mount option while using -hosts
    and host.net
    - remove intr hosts map mount option.
    - fix previous changelog entry revision.
  - Resolves: rhbz#1974309


author: Ian Kent <ikent@redhat.com> - 5.1.4-75
changelog:
  - bz2023740 - autofs: send FAIL cmd/ioctl mess when encountering problems
    with mount trigger
    - fix kernel mount status notification.
  - Resolves: rhbz#2023740


author: Ian Kent <ikent@redhat.com> - 5.1.4-76
changelog:
  - bz2025963 - autofs service has not proper limits set to be able to handle many mounts
    - fix set open file limit.
    - improve descriptor open error reporting.
  - Resolves: rhbz#2025963


author: Ian Kent <ikent@redhat.com> - 5.1.4-77
changelog:
  - bz2025509 - Autofs auto.smb awk script fails on shares with dollar signs
    - fix double quoting in auto.smb.
    - fix double quoting of ampersand in auto.smb as well.
  - Resolves: rhbz#2025509


author: Ian Kent <ikent@redhat.com> - 5.1.4-81
changelog:
  - bz2033552 - Using -hosts option does not work after upgrading from 8.4 to 8.5
    - fix root offset error handling.
    - fix nonstrict fail handling of last offset mount.
    - dont fail on duplicate offset entry tree add.
    - fix loop under run in cache_get_offset_parent().
    - simplify cache_add() a little.
    - fix use after free in tree_mapent_delete_offset_tree().
    - fix memory leak in xdr_exports().
    - avoid calling pthread_getspecific() with NULL key_thread_attempt_id.
    - fix sysconf(3) return handling.
  - Resolves: rhbz#2033552


author: Ian Kent <ikent@redhat.com> - 5.1.4-82
changelog:
  - bz2052122 - autofs attempts unmount on directory in use
    - make umount_ent() recognise forced umount.
    - remove nonstrict parameter from tree_mapent_umount_offsets().
    - fix handling of incorrect return from umount_ent().
  - Resolves: rhbz#2052122


author: Ian Kent <ikent@redhat.com> - 5.1.4-83
changelog:
  - bz2069097 - libnss_sss: threads stuck at sss_nss_lock from initgroups
    - dont use initgroups() at spawn.
  - Resolves: rhbz#2069097


author: Ian Kent <ikent@redhat.com> - 5.1.4-84
changelog:
  - bz2130034 - automount -m crashes with Segmentation fault (core dumped)
    - fix invalid tsv access.
  - Resolves: rhbz#2130034


author: Ian Kent <ikent@redhat.com> - 5.1.4-85
changelog:
  - bz2139504 - segfault due to lookup_mod->context address being freed
    and reused while multiple threads were using it
    - fix parse module instance mutex naming.
    - serialise lookup module open and reinit.
  - Resolves: rhbz#2139504


author: Ian Kent <ikent@redhat.com> - 5.1.4-86
changelog:
  - bz2139504 - segfault due to lookup_mod->context address being freed
    and reused while multiple threads were using it
    - coverity fix for invalid access.
  - Related: rhbz#2139504


author: Ian Kent <ikent@redhat.com> - 5.1.4-87
changelog:
  - bz2139504 - segfault due to lookup_mod->context address being freed
    and reused while multiple threads were using it
    - fix hosts map deadlock on restart.
    - fix deadlock with hosts map reload.
  - Related: rhbz#2139504


author: Ian Kent <ikent@redhat.com> - 5.1.4-88
changelog:
  - bz2139504 - segfault due to lookup_mod->context address being freed
    and reused while multiple threads were using it
    - fix memory leak in update_hosts_mounts().
  - Related: rhbz#2139504


author: Ian Kent <ikent@redhat.com> - 5.1.4-89
changelog:
  - bz2149206 - RHEL9: automount does not handle null option string after
    "-" anymore
    - fix concat_options() error handling.
    - fix minus only option handling in concat_options().
  - Resolves: rhbz#2149206


author: Ian Kent <ikent@redhat.com> - 5.1.4-90
changelog:
  - bz2149206 - RHEL9: automount does not handle null option string after
    "-" anymore
    - fix changelog entry.
  - Related: rhbz#2149206


author: Ian Kent <ikent@redhat.com> - 5.1.4-91
changelog:
  - bz2148872 - autofs: errors in autofs-5.1.4-83.el8.x86_64 when restarting
    autofs with busy directories
    - fix incorrect path for is_mounted() in try_remount().
  - Resolves: rhbz#2148872


author: Ian Kent <ikent@redhat.com> - 5.1.4-92
changelog:
  - bz2161336 - Users can trigger a simple autofs DoS with wildcard automounter maps
    - fail on empty trailing replicated host name.
  - Resolves: rhbz#2161336


author: Ian Kent <ikent@redhat.com> - 5.1.4-93
changelog:
  - bz2165143 - Autofs reports can't connect to sssd, retry for 10 seconds when
    real problem is empty LDAP object
    - improve handling of ENOENT in sss setautomntent().
    - dont immediately call function when waiting.
  - Resolves: rhbz#2165143


author: Ian Kent <ikent@redhat.com> - 5.1.4-102
changelog:
  - bz2177998 - deadlock while reading amd maps
    - fix return status of mount_autofs().
    - don't close lookup at umount.
    - fix deadlock in lookups.
    - dont delay expire.
    - make amd mapent search function name clear.
    - rename statemachine() to signal_handler().
    - make signal handling consistent.
    - fix incorrect print format specifiers in get_pkt().
    - eliminate last remaining state_pipe usage.
    - add function master_find_mapent_by_devid().
    - use device id to locate autofs_point when setting log priotity.
    - add command pipe handling functions.
    - switch to application wide command pipe.
    - get rid of unused field submnt_count.
    - fix mount tree startup reconnect.
    - fix unterminated read in handle_cmd_pipe_fifo_message() (Coverity).
  - Resolves: rhbz#2177998


author: Ian Kent <ikent@redhat.com> - 5.1.4-103
changelog:
  - bz2177998 - deadlock while reading amd maps
    - rebuild to avoid possible NVR problems.
  - Related: rhbz#2177998


author: Ian Kent <ikent@redhat.com> - 5.1.4-104
changelog:
  - bz2208408 - autofs fails to start with combination of +auto.master and
    local direct map lookups after upgrading to 5.1.4-93.el8
    - fix memory leak in sasl_do_kinit() (Coverity).
    - fix fix mount tree startup reconnect.
  - Resolves: rhbz#2208408


author: Ian Kent <ikent@redhat.com> - 5.1.4-105
changelog:
  - bz2207801 - amd map format netgoup selector function not working
    - fix date for revision 104 changelog entry.
    - fix use_ignore_mount_option description.
    - include addtional log info for mounts.
    - fix amd selector function matching.
    - get rid entry thid field.
    - continue expire immediately after submount check.
    - add buffer length checks to autofs mount_mount().
    - eliminate realpath from mount of submount.
    - eliminate root param from autofs mount and umount.
    - remove redundant fstat from do_mount_direct().
    - get rid of strlen call in handle_packet_missing_direct().
    - remove redundant stat call in lookup_ghost().
    - set mapent dev and ino before adding to index.
    - change to use printf functions in amd parser.
    - dont call umount_subtree_mounts() on parent at umount.
    - dont take parent source lock at mount shutdown.
    - eliminate buffer usage from handle_mounts_cleanup().
    - fix possible use after free in handle_mounts_exit().
    - make submount cleanup the same as top level mounts.
    - eliminate some more alloca usage.
    - add soucre parameter to module functions.
    - add ioctlfd open helper.
    - make open files limit configurable.
  - Resolves: rhbz#2207801


author: Ian Kent <ikent@redhat.com> - 5.1.4-106
changelog:
  - bz2214444 - The sss lookup modules handles error return incorrectly
    in some cases
    - fix some sss error return cases.
  - Resolves: rhbz#2214444


author: Ian Kent <ikent@redhat.com> - 5.1.4-107
changelog:
  - bz2216877 - When looking up included maps, sometimes autofs does not
    consult all the included files in order
    - fix incorrect matching of cached wildcard key
  - Resolves: rhbz#2216877


author: Ian Kent <ikent@redhat.com> - 5.1.4-108
changelog:
  - bz2216877 - When looking up included maps, sometimes autofs does not
    consult all the included files in order
    - fix the "fix incorrect matching of cached wildcard key" patch.
  - Related: rhbz#2216877


author: Ian Kent <ikent@redhat.com> - 5.1.4-109
changelog:
  - bz2213267 - filesystems mount and expire immediately
    - fix expire retry looping.
  - Resolves: rhbz#2213267


author: Ian Kent <ikent@redhat.com> - 5.1.4-109.1
changelog:
  - RHEL-21288 - SIGSEGV using hierarchical map entries on reload with
    autofs-5.1.4-109
    - fix get parent multi-mount check in try_remount().
    - fix deadlock in remount.
  - Resolves: RHEL-21288


author: Ian Kent <ikent@redhat.com> - 5.1.4-110
changelog:
  - bz2232402 - autofs attempts to mount nonexistant ".hidden" filesystems
    - allow -null map in indirect maps.
  - Resolves: rhbz#2232402


author: Ian Kent <ikent@redhat.com> - 5.1.4-111
changelog:
  - RHEL-12369 - autofs attempts to mount nonexistant ".hidden" filesystems
    - update patch "allow -null map in indirect maps".
  - Resolves: RHEL-12369


author: Ian Kent <ikent@redhat.com> - 5.1.4-112
changelog:
  - RHEL-7997 - multi mount detection fails for share with blank+dash
    causing SEGV crash
    -fix multi-mount check.
  -Resolves: RHEL-7997


author: Ian Kent <ikent@redhat.com> - 5.1.4-113
changelog:
  - RHEL-18035 - SIGSEGV using hierarchical map entries on reload with
    autofs-5.1.4-109
    - fix get parent multi-mount check in try_remount().
    - fix deadlock in remount.
  - Resolves: RHEL-18035


author: Ian Kent <ikent@redhat.com> - 5.1.4-114
changelog:
  - RHEL-61670 - sporadic autofs daemon segfaults
    - fix submount shutdown race.
  - RHEL-52402 - Sporadic mount failures with amd program maps on RHEL8
    - fix amd external mount error handling.
    - fix amd external mount mount handling.
    - don't free ext mount if mounted.
    - refactor amd function do_program_mount().
    - refactor umount_amd_ext_mount().
    - add flags argument to amd do_program_mount().
  - Resolves: RHEL-61670 RHEL-52402


author: Michal Sekletar <msekleta@redhat.com> - 0.7-21.1
changelog:
  - Fix CVE-2021-3468 (RHEL-18311)
  - Fix CVE-2023-38469 (RHEL-17783)
  - Fix CVE-2023-38470 (RHEL-17795)
  - Fix CVE-2023-38471 (RHEL-17789)
  - Fix CVE-2023-38472 (RHEL-17807)
  - Fix CVE-2023-38473 (RHEL-17801)


author: Donnie Barnes <djb@redhat.com>
changelog:
  - added signal handling patch from Dean Gaudet <dgaudet@arctic.org> that
    is based on a change made in bash 2.0.  Should fix some early exit
    problems with suspends and fg.


author: Ian Macdonald <ianmacd@xs4all.nl>
changelog:
  - upgraded to version 2.02
  - Alpha, MIPS & Sparc patches removed due to lack of test platforms
  - glibc & signal patches no longer required
  - added documentation subpackage (doc)


author: Florian La Roche <Florian.LaRoche@redhat.com>
changelog:
  - add some collected patches for bash2
  - change it over to be the main bash package
  - install man-pages root:root
  - obsolete bash2, bash2-doc


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 2.04beta5
  - adapt patches
  - Fix up bashrc
  - Don't put in bashrc1, this should be done by the bash1 package
  - use install -c instead of plain install to work on *BSD
  - remove the collected patches - they're now in the base version.
  - make compressed man pages optional


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 2.04 final
  - remove the echo, pwd, test and kill man pages from the package,
    we're getting them from sh-utils


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.05-1
changelog:
  - Update to 2.05
  - Change PROMPT_COMMAND in bashrc for xterms
    to something less space consuming (#24159)
  - Provide plugs for alternate prompt commands (#30634), but don't
    default to them


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.05-2
changelog:
  - bash comes with its own copy of readline... Add the patches we're
    applying in the readline package.


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.05-5
changelog:
  - Don't set BASH_ENV in .bash_profile, it causes .bashrc to be sourced
    twice in interactive non-login shells.
  - s/Copyright/License/


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.05a-9
changelog:
  - Add patch from Ulrich Drepper to get better error messages when trying
    to launch an application with a bad ELF interpreter (e.g. libc5 ld.so)
    (#60870)


author: Tim Waugh <twaugh@redhat.com> 2.05b-4
changelog:
  - Fix history substitution modifiers in UTF-8 (bug #70294, bug #71186).
  - Fix ADVANCE_CHAR at end of string (bug #70819).
  - docs: CWRU/POSIX.NOTES no longer exists, but ship POSIX.


author: Tim Waugh <twaugh@redhat.com> 2.05b-6
changelog:
  - Add the (4) patches from ftp.gnu.org (bug #75888, bug #72512).
  - Ship '.' man page, which doesn't get picked up by glob.
  - Don't install files not shipped when building.
  - Locale shell variables fix (bug #74701).


author: Tim Waugh <twaugh@redhat.com> 2.05b-23
changelog:
  - Fix a warning message (bug #79629).
  - Don't remove generated source during build, for debuginfo package.
  - Don't build with AFS support (bug #86514).


author: Tim Waugh <twaugh@redhat.com> 3.0-2
changelog:
  - Fixed brace expansion (bug #129128).
  - Build with AFS support again, since bug #86514 seems fixed upstream
    (bug #129094).


author: Tim Waugh <twaugh@redhat.com> 3.0-5
changelog:
  - Make trap usage string show POSIX usage (bug #128938).
  - Updated ${x[@]:1} expansion fix from bug-bash list.
  - Updated patch to fix unset array crash (from bug-bash list).


author: Tim Waugh <twaugh@redhat.com> 3.0-13
changelog:
  - Check for EINVAL from waitpid() and avoid WCONTINUED in that case.
  - Fixed jobs4 test.
  - Applied experimental upstream patch for trap compatibility.
  - Re-make documentation to reflect source changes.


author: Tim Waugh <twaugh@redhat.com> 3.0-21
changelog:
  - Added code to /etc/skel/.bash_logout to support the gpm selection buffer
    invalidation on virtual terminals (bug #115493).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Reverted this change:
    - Added code to /etc/skel/.bash_logout to support the gpm selection buffer
      invalidation on virtual terminals (bug #115493).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Fixed AFS support for output redirection, so that the correct errors
    are reported for other filesystems (bug #155373).


author: Tim Waugh <twaugh@redhat.com> 3.0-36
changelog:
  - Added Url: tag (bug #172770).
  - Do not explicitly gzip info pages (bug #172770).
  - Fix permissions on bashbug (bug #172770).


author: Tim Waugh <twaugh@redhat.com> 3.0-40
changelog:
  - Fix read memleak when reading from non-blocking fd (bug #173283).
  - Missed another loop for improved sighandler patch (bug #169231).


author: Tim Waugh <twaugh@redhat.com> 3.1-1
changelog:
  - 3.1.
  - No longer need ia64, utf8, multibyteifs, jobs, sigpipe,
    read-e-segfault, manpage, crash, pwd, afs, subshell patches.
  - Remove wrap patch for now.
  - Use upstream patch to fix arrays.


author: Tim Waugh <twaugh@redhat.com> 3.1-2
changelog:
  - No longer need loadables, mbinc or shellfunc patches.
  - Use literal single-quote in bash man page where appropriate (bug #177051).


author: Tim Waugh <twaugh@redhat.com> 3.2-1
changelog:
  - Build requires autoconf and gettext.
  - 3.2.  No longer need aq, login, ulimit, sighandler or read-memleak
    patches.


author: Tim Waugh <twaugh@redhat.com> 3.2-5
changelog:
  - Added triggers for install-info (bug #225609).
  - Use full path to utilities in scriptlets (bug #225609).
  - Fix missing sh-bangs in example scripts (bug #225609).
  - Post requires ncurses (bug #224567).
  - Removed Prefix tag (bug #225609).
  - Fixed BuildRoot tag (bug #225609).
  - Removed trailing full-stop from summary (bug #225609).
  - Spec file is now UTF-8 (bug #225609).
  - Removed obsolete Obsoletes (bug #225609).
  - Moved 'make check' to new 'check' section (bug #225609).
  - Removed uses of RPM_SOURCE_DIR (bug #225609).
  - Fixed macros in changelog (bug #225609).
  - Changed tabs to spaces (bug #225609).


author: Tim Waugh <twaugh@redhat.com> 3.2-7
changelog:
  - Reinstated this change:
    - Post requires ncurses (bug #224567).
  - Reverted this change:
    - Added triggers for install-info (bug #225609).


author: Pete Graner <pgraner@redhat.com> - 3.2-15
changelog:
  - Update to the Improve bash $RANDOM pseudo RNG (bug #234906) 
    now works with subshells and make $RANDOM on demand thus reducing the 
    amount of AVCs thrown.


author: Pete Graner <pgraner@redhat.com> - 3.2-17
changelog:
  - Added bash32-018 upstream official patch
  - Added bash32-020 upstream official patch
  - Added bash32-019 upstream official patch


author: Pete Graner <pgraner@redhat.com> - 3.2-18
changelog:
  - Added bash32-021 upstream official patch
  - Added bash32-025 upstream official patch
  - Added bash32-024 upstream official patch
  - Added bash32-023 upstream official patch
  - Added bash32-022 upstream official patch


author: Tomas Janousek <tjanouse@redhat.com> - 3.2-19
changelog:
  - fix cursor position when prompt has one invisible character (#358231)
  - dropped examples/loadables/ from docs, since it wasn't possible to build them
    anyway (#174380)
  - fix #286861: Wrong input confuses bash's arithmetic unit permanently
  - fix #344411: $RANDOM stays the same when job executed in the background


author: Tomas Janousek <tjanouse@redhat.com> - 3.2-20
changelog:
  - Added bash32-026 upstream official patch
  - Added bash32-027 upstream official patch (#249987)
  - Added bash32-028 upstream official patch
  - Added bash32-029 upstream official patch (#286861)
  - Added bash32-030 upstream official patch
  - Added bash32-031 upstream official patch (#358231)
  - Added bash32-032 upstream official patch
  - Added bash32-033 upstream official patch
  - Fix insert command repeating in vi mode (#190350)


author: Roman Rakus <rrakus@redhat.com> - 3.2-28
changelog:
  - Removing Requires for mktemp and ncurses, which cause
    dependencing loop
  - Enabling #define SSH_SOURCE_BASHRC, because ssh changed.
    Resolves: #458839
  - Catch signals right after calling execve()
    Resolves: #455548


author: Jesse Keating <jkeating@redhat.com> - 3.2-29
changelog:
  - Add the Requires(post) back for ncurses-libs, so that rpm knows
    where to break the loop.  The post actually does require the curses
    libs for the sh calls.  Could consider doing this in LUA and not have
    any external deps.


author: Ville Skyttä <ville.skytta@iki.fi> - 4.1.9-2
changelog:
  - Move doc dir ownership to main package.
  - Preserve doc timestamps.
  - Add --without tests option for building without running the test suite.


author: Roman Rakus <rrakus@redhat.com> - 4.1.9-3
changelog:
  - don't segfault when trying to bind int variable to array
    with bad array subsrcipt
    Resolves: #618289


author: Roman Rakus <rrakus@redhat.com> - 4.2.37-7
changelog:
  - Update info about trap in man page
    Resolves: #799958
  - instead of setting the signal handler to SIG_IGN while installing
    the new trap handler, block the signal and unblock it after the new handler
    is installed
    Resolves: #695656


author: Roman Rakus <rrakus@redhat.com> - 4.2.45-2
changelog:
  - Fixed a bug that caused trap handlers to be executed recursively,
    corrupting internal data structures.


author: Ondrej Oprala - 4.3.39-5
changelog:
  - #1182278 - bash crashes on `select' if REPLY is readonly
  - #1241533,1224855 - bash memleak when LC_ALL set


author: Siteshwar Vashisht <svashisht@redhat.com> - 4.3.42-5
changelog:
  - Do not set terminate_immediately and interrupt_immediately while expanding tilda
    Resolves: #1336800


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 4.3.43-2
changelog:
  - Inverted the condition for UsrMove safeguard check, so we comply with:
    https://fedoraproject.org/wiki/Packaging:Conflicts


author: Kevin Fenzi <kevin@scrye.com> - 1.07.1-1https://bugs.archlinux.org/task/53546
changelog:
  - Update to 1.07.1
  - Fixes a bug that breaks kernel builds ( https://bugs.archlinux.org/task/53546 )


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.36-4
changelog:
  - Tighten cache protection against record from forwarders (CVE-2021-25220)
  - Include test of forwarders


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.36-5
changelog:
  - Fix memory leak in ECDSA verify processing (CVE-2022-38177)
  - Fix memory leak in EdDSA verify processing (CVE-2022-38178)


author: Scott Lampert <fortunato@heavymetal.org>
changelog:
  - Used buildroot
  - patched bin/named/ns_udp.c to use <libelf/nlist.h> for include
    on Redhat 5.0 instead of <nlist.h>


author: Manuel J. Galan <manolow@step.es>
changelog:
  - Several essential modifications to build and install correctly.
  - Modified 'ndc' to avoid deprecated use of '-'


author: Stepan Kasal <kasal@math.cas.cz>
changelog:
  - nslookup patched:
    to count numRecords properly
    to fix subsequent calls to ls -d
    to parse "view" and "finger" commands properly
    the view hack updated for bind-8 (using sed)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 8.2.1.
  - add named.logrotate (#3571).
  - hack around egcs-1.1.2 -m486 bug (#3413, #3485).
  - vet file list.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - use real stop and start in named.init for restart, not ndc restart, it has
    problems when named has changed during a package update... (# 4890)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix up location of named-bootconf.pl and make it executable
    (Bug #8028)
  - bind-devel requires bind


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - provide /var/named (fix for bugs #9847, #10205)
  - preserve args when restarted via ndc(8) (bug #10227)
  - make resolv.conf(5) a link to resolver(5) (bug #10245)
  - fix SYSTYPE bug in all makefiles
  - move creation of named user from %post into %pre


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - modify logrotate setup to use PID file
  - temporarily disable optimization by unsetting $RPM_OPT_FLAGS at build-time
  - actually bump the release this time


author: Bernhard Rosenkranzer <bero@redhat.com>
changelog:
  - Fix up the initscript (Bug #13033)
  - Fix build with current glibc (Bug #12755)
  - /etc/rc.d/init.d -> /etc/init.d
  - use %{_mandir} rather than /usr/share/man


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - fixed logrotate script (wrong path to kill)
  - include header files in -devel package
  - bugzilla #22049, #19147, 21606


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Move run files to /var/run/named/ - /var/run isn't writable
    by the user we're running as. (Bug #20665)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Make /etc/rndc.conf and /etc/sysconfig/named noreplace
  - Make devel require bind = %{version} rather than just bind


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update to 9.1.1rc1; fixes 17 bugs (14 of them affecting us;
    1 was fixed in a Red Hat patch already, 2 others are portability
    improvements)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 9.1.1 probably won't be out in time, revert to 9.1.0 and apply fixes
    from 9.1.1rc2
  - bind requires bind-utils (#28317)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Don't use the standard rndc key from the documentation, instead, create a random one
    at installation time (#26358)
  - Make /etc/rndc.conf readable by user named only, it contains secret keys


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.0-9
changelog:
  - Work around bind 8 -> bind 9 migration problem when using buggy zone files:
    accept zones without a TTL, but spew out a big fat warning. (#31393)


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.2-1
changelog:
  - 9.1.2 final. No changes between 9.1.2-0.rc1.1 and this one, except for
    the version number, though.


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.3-0.rc1.2
changelog:
  - Add named.conf man page from bind 8.x (outdated, but better than nothing,
    - Rename the rndc key (#42895)
  - Add dnssec* man pages


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.3-3
changelog:
  - Add build dependencies (#49368)
  - Make sure running service named start several times doesn't create
    useless processes (#47596)
  - Work around the named parent process returning 0 even if the config
    file is broken (it's parsed later by the child processes) (#45484)


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.3-4
changelog:
  - Make sure /etc/rndc.conf isn't world-readable even after the
    %post script inserted a random key (#53009)


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.2.0-0.rc3.1
changelog:
  - 9.2.0rc3
  - remove ttl patch, I don't think we need this for 8.0.
  - remove dig.1.bz2 from the bind8-manpages tar file, 9.2 has a new dig man page
  - add lwres* man pages to -devel


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.2.0-7
changelog:
  - Don't exit if /etc/named.conf doesn't exist if we're running
    chroot (#60868)
  - Revert Elliot's changes, we do require specific glibc/glibc-kernheaders
    versions or bug #58335 will be back. "It compiles, therefore it works"
    isn't always true.


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.2.1-2
changelog:
  - Move libisccc, lib isccfg and liblwres from bind-utils to bind,
    they're not required if you aren't running a nameserver.


author: Karsten Hopp <karsten@redhat.de> 9.2.1-7
changelog:
  - fix name of pidfine in logrotate script (#68842)
  - fix owner of logfile in logrotate script (#41391)
  - fix nslookup and named.conf man pages (output on stderr)
    (#63553, #63560, #63561, #54889, #57457)
  - add rfc1912 (#50005)
  - gzip all rfc's
  - fix typo in keygen.c (#54870)
  - added missing manpages (#64065)
  - shutdown named properly with rndc stop (#62492)
  - /sbin/nologin instead of /bin/false (#68607)
  - move nsupdate to bind-utils (where the manpage already was) (#66209, #66381)
  - don't kill initscript when rndc fails (reload)    (#58750)


author: Daniel Walsh <dwalsh@redhat.com> 9.2.1-12
changelog:
  - Fix log rotate to use service named reload
  - Change service named reload to give success/failure message [73770]
  - Fix File checking [75710]
  - Begin change to automatically run in CHROOT environment


author: Daniel Walsh <dwalsh@redhat.com> 9.2.2-13
changelog:
  - Fix config description of named.conf in chroot
  - Change named.init script to check for existence of /etc/sysconfig/network


author: Jason Vas Dias <jvdias@redhat.com>
changelog:
  - Fixed named.init generation of error messages on
  - 'service named stop' and 'service named reload'
  - as per bug 127775


author: Jason Vas Dias <jvdias@redhat.com>
changelog:
  - Fixed bug 129289: bind-chroot install / deinstall
  - on install, existing config files 'safe_replace'd
  - with links to chroot copies; on uninstall, moved back.


author: Jason Vas Dias <jvdias@redhat.com>
changelog:
  - Remove resolver(5) manpage now in man-pages (bug 130792);
  - Don't create /dev/ entries in bind-chroot if already there (bug 127556);
  - fix bind-devel Requires (bug 130919)
  - Set default location for dumpdb & stats files to /var/named/data


author: Jason Vas Dias <jvdias@redhat.com>
changelog:
  - Fix bug 130981: add '-t' option to named-checkconf invocation in
  - named.init if chroot installed.


author: Jason Vas Dias <jvdias@redhat.com> - 10:9.2.4rc7-10
changelog:
  - Fix bug 130121: add '%ghost' entries for files included in previous
  - bind-chroot & not in current - ie. named.conf, rndc.key, dev/* -
  - that RPM removed after upgrade .


author: Jason Vas Dias <jvdias@redhat.com> - 10:9.2.4rc7-11_EL3
changelog:
  - Fix bug 131803: replace ROOTDIR line removed by broken
  - bind-chroot 9.2.2-21's '%postun'; added %triggerpostun for bind-chroot


author: Jason Vas Dias <jvdias@redhat.com> - 10:9.2.4rc7-12_EL3
changelog:
  - Fix bug 132303: if ROOTDIR line was replaced after upgrade from
  - bind-chroot-9.2.2-21, restart named


author: Jason Vas Dias <jvdias@redhat.com> - 10:9.2.4rc8-14
changelog:
  - Upgrade to upstream bind-9.2.4rc8 .
  - Progress: Finally! Hooray! ISC bind now distributes:
  - o named.conf(5) and nslookup(8) manpages
  -    'bind-manpages.bz2' source can now disappear
  -    (could this have something to do with ISC bug I raised about this?)
  - o 'deprecation_msg' global has vanished
  -     bind-9.2.3rc3-deprecation_msg_shut_up.diff.bz2 can disappear


author: Jason Vas Dias <jvdias@redhat.com> - 20:9.2.4-1
changelog:
  - BIND 9.2.4 (final release) released - source code actually
  - identical to 9.2.4rc8, with only version number change.


author: Jason Vas Dias <jvdias@redhat.com> - 20:9.2.4-2
changelog:
  - Fix bug 136243: bind-chroot %post must run restorecon -R %{prefix}
  - Fix bug 135175: named.init must return non-zero if named is not run
  - Fix bug 134060: bind-chroot %post must use mktemp, not /tmp/named
  - Fix bug 133423: bind-chroot %files entries should have been %dirs


author: Jason Vas Dias <jvdias@redhat.com> - 20:9.2.4-4
changelog:
  - Fix bugs 140528 and 141113:
  - 2 second timeouts when IPv6 not configured and root nameserver's
  - AAAA addresses are queried


author: Jason Vas Dias <jvdias@redhat.com> - 22:9.3.0-2
changelog:
  - Fix bug 143438: named.init will now make correct ownership of $ROOTDIR/var/named
  -                 based on 'named_write_master_zones' SELinux boolean.
  - Fix bug 143744: dig & nsupdate IPv6 timeout  (dup of 140528)


author: Jason Vas Dias <jvdias@redhat.com> - 22:9.3.1rc1-1
changelog:
  - Upgrade to 9.3.1rc1
  - Add Simplified Database Backend (SDB) sub-package ( bind-sdb )
  -     add named_sdb - ldap + pgsql + dir database backend support with
  -     'ENABLE_SDB' named.sysconfig option
  - Add BIND resolver library & includes sub-package ( libbind-devel)
  - fix bug 147824 / 147073 / 145664: ENABLE_ZONE_WRITE in named.init
  - fix bug 146084 : shutup restorecon


author: Jason Vas Dias <jvdias@redhat.com> - 22.9.3.1rc1-5
changelog:
  - fix bug 150288: h_errno not being accessed / set correctly in libbind
  - add libbind man-pages from bind-8.4.6


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-2_FC4
changelog:
  - Rebuild for bind-sdb libpq.so.3 dependency
  - fix bug 150981: don't install libbind man-pages if no libbind
  - fix bug 151852: mount proc on $ROOTDIR/proc to allow sysconf(...)
    to work and correct number of CPUs to be determined


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-4_dbus
changelog:
  - Enhancement to allow dynamic forwarder table management and
  - DHCP forwarder auto-configuration with D-BUS


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-4
changelog:
  - Fix bug 157601: give named.init a configtest function
  - Fix bug 156797: named.init should check SELinux booleans.local before booleans
  - Fix bug 154335: if no controls in named.conf, stop named with -TERM sig, not rndc
  - Fix bug 155848: add NOTES section to named.8 man-page with info on all Red Hat
                    BIND quirks and SELinux DDNS / slave zone file configuration
  - D-BUS patches NOT applied until dhcdbd is in FC


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-6
changelog:
  - fix bug 157950: dig / host / nslookup should reject invalid resolv.conf
                    files and not use uninitialized garbage nameserver values
                    (ISC bug 14841 raised).


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-7
changelog:
  - fix bug 160914: resolver utilities should try next server on empty referral
                    (now that glibc bug 162625 is fixed)
                    host and nslookup now by default try next server on SERVFAIL
                    (host now has '-s' option to disable, and nslookup given
                     '[no]fail' option similar to dig's [no]fail option).
  - rebuild and re-test with new glibc & gcc (all tests passed).


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-10
changelog:
  - Build with D-BUS patch by default; D-BUS support enabled with named -D option
  - Enable D-BUS for named_sdb also
  - fix sdb pgsql's zonetodb.c: must use isc_hash_create() before dns_db_create()
  - update fix for bug 160914 : test for RD=1 and ARCOUNT=0 also before trying next server
  - fix named.init script to handle named_sdb properly
  - fix named.init script checkconfig() to handle named '-c' option
    and make configtest, test, check configcheck synonyms


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-12
changelog:
  - fix bug 168302: use %{__cc} for compiling dns-keygen
  - fix bug 167682: bind-chroot directory permissions
  - fix issues with -D dbus option when dbus service not running or disabled


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-18
changelog:
  - fix bug 169969: do NOT call dbus_svc_dispatch() in dbus_mgr_init_dbus() -
        task->state != task_ready and will cause Abort in task.c if process
        is waiting for NameOwnerChanged to do a SetForwarders


author: Jason Vas Dias <jvdias@redhat.com> - 24.9.3.1-20
changelog:
  - Allow the -D enable D-BUS option to be used within bind-chroot .
  - fix bug 171226: supply some documentation for pgsql SDB .


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-22
changelog:
  - fix bug 172632 - remove .la files
  - ship namedGetForwarders and namedSetForwarders scripts
  - fix detection of -D option in chroot


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-24
changelog:
  - allow D-BUS support to work in bind-chroot environment:
    workaround latest selinux policy by mounting /var/run/dbus/
    under chroot instead of /var/run/dbus/system-bus-socket


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-4
changelog:
  - regenerate redhat_doc patch for non-DBUS builds
  - allow dbus builds to work with dbus version < 0.6 (bz #179816)


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-6
changelog:
  - replace caching-nameserver with bind-config sub-package
  - fix bug 177595: handle case where $ROOTDIR is a link in initscript
  - fix bug 177001: bind-config creates symlinks OK now
  - fix bug 176388: named.conf is now never replaced by any RPM
  - fix bug 176248: remove unecessary creation of rpmsave links
  - fix bug 174925: no replacement of named.conf
  - fix bug 173963: existing named.conf never modified
  - major .spec file cleanup


author: Jason Vas Dias <jvdias@redhat.com> - 30.9.3.2-8
changelog:
  - Do not allow package to be installed if named:25 userid creation fails
  - Give libbind a pkg-config file
  - remove restorecon from bind-chroot-admin (not required).
  - fix named.caching-nameserver.conf (listen-on-v6 port 53 { ::1 };)


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-14
changelog:
  - fix bug 186577: remove -L/usr/lib from libbind.pc and more .spec file cleanup
  - add '%doc' sample configuration files in /usr/share/doc/bind*/sample
  - rebuild with new gcc and glibc


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-16
changelog:
  - fix bug 187286: 
       prevent host(1) printing duplicate 'is an alias for' messages
       for the default AAAA and MX lookups as well as for the A lookup
       (it now uses the CNAME returned for the A lookup for the AAAA and MX lookups).
       This is upstream bug #15702 fixed in the unreleased bind-9.3.3
  - fix bug 187333: fix SOURCE24 and SOURCE25 transposition


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-20
changelog:
  - fix resolver.c ncache_adderesult segfault reported in addenda to bug 173961 
    (upstream bugs #15642, #15528 ?)
  - allow named ability to generate core dumps after setuid (upstream bug #15753)


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-22
changelog:
  - apply upstream patch for ncache_adderesult segfault bug 173961 addenda
  - fix bug 188382: rpm --verify permissions inconsistencies
  - fix bug 189186: use /sbin/service instead of initscript
  - rebuild for new gcc, glibc-kernheaders


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-26.FC6
changelog:
  - fix bugs 191093, 189789
  - backport selected fixes from upstream bind9 'v9_3_3b1' CVS version:
    ( see http://www.isc.org/sw/bind9.3.php "Fixes" ): 
    o change 2024 / bug 16027:
      named emitted spurious "zone serial unchanged" messages on reload
    o change 2013 / bug 15941:
      handle unexpected TSIGs on unsigned AXFR/IXFR responses more gracefully
    o change 2009 / bug 15808: coverity fixes
    o change 1997 / bug 15818: 
      named was failing to replace negative cache entries when a positive one
      for the type was learnt
    o change 1994 / bug 15694: OpenSSL 0.9.8 support
    o change 1991 / bug 15813:
      The configuration data, once read, should be treated as readonly.
    o misc. validator fixes 
    o misc. resolver fixes
    o misc. dns fixes
    o misc. isc fixes
    o misc. libbind fixes
    o misc. isccfg fix
    o misc. lwres fix
    o misc. named fixes
    o misc. dig fixes
    o misc. nsupdate fix
    o misc. tests fixes


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-30
changelog:
  - fix bug 196398 - Enable -D option automatically in initscript
    if NetworkManager enabled in any runlevel.
  - fix namedGetForwarders for new dbus
  - fix bug 195881 - libbind.so should be owned by bind-libbind-devel


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-32
changelog:
  - fix addenda to bug 189789: 
    determination of selinux enabled was still not 100% correct in bind-chroot-admin
  - fix addenda to bug 196398:
    make named.init test for NetworkManager being enabled AFTER testing for -D absence;
    named.init now supports a 'DISABLE_NAMED_DBUS' /etc/sysconfig/named setting to disable
    auto-enable of named dbus support if NetworkManager enabled.


author: Martin Stransky <stransky@redhat.com> - 30:9.3.2-37
changelog:
  - fix for #202542 - /usr/sbin/bind-chroot-admin: No such file or directory
  - fix for #202547 - file_contexts: invalid context


author: Martin Stransky <stransky@redhat.com> - 30:9.3.3-3
changelog:
  - added fix from #209400 - Bind Init Script does not create 
    the PID file always, created by Jeff Means
  - added timeout to stop section of init script. 
    The default is 100 sec. and can be adjusted by NAMED_SHUTDOWN_TIMEOUT
    shell variable.


author: Martin Stransky <stransky@redhat.com> - 30:9.3.3-6
changelog:
  - fix for #200465: named-checkzone and co. cannot be run as non-root user
  - fix for #212348: chroot'd named causes df permission denied error
  - fix for #211249, #211083 - problems with stopping named
  - fix for #212549: init script does not unmount /proc filesystem
  - fix for #211282: EDNS is globally enabled, crashing CheckPoint FW-1,
      added edns-enable options to named configuration file which can suppress
      EDNS in queries to DNS servers (see /usr/share/doc/bind-9.3.3/misc/options)
  - fix for #212961: bind-chroot doesn't clean up its mess on %preun
  - update to 9.3.3rc3, removed already merged patches


author: Martin Stransky <stransky@redhat.com> - 31:9.3.3-0.1.rc3
changelog:
  - added back an interval to restart
  - renamed package, it should meet the N-V-R criteria
  - fix for #216185: bind-chroot-admin able to change root mode 750
  - added fix from #215997: incorrect permissions on dnszone.schema
  - added a notice to init script when /etc/named.conf doesn't exist (#216075)


author: Martin Stransky <stransky@redhat.com> - 31:9.3.3-2
changelog:
  - added namedGetForwarders written in shell (#176100),
    created by Baris Cicek <baris@nerd.com.tr>.


author: Adam Tkac <atkac@redhat.com> 31:9.3.3-4.fc7
changelog:
  - package bind-libbind-devel has beed removed (libs has been moved to bind-devel & bind-libs)
  - Resolves: #214208


author: Adam Tkac <atkac@redhat.com> 31:9.3.4-3.fc7
changelog:
  - fixed building without libbind
  - fixed post section (selinux commands is now in if-endif statement)
  - prever macro has been removed from version


author: Adam Tkac <atkac@redhat.com> 31:9.4.0-1.fc7
changelog:
  - updated to 9.4.0
  - bind-chroot-admin now sets EAs correctly (#213926)
  - throw away next_server_on_referral and no_servfail_stops patches (fixed in 9.4.0)


author: Adam Tkac <atkac redhat com> 31:9.4.0-2.fc7
changelog:
  - added experimental SQLite support (written by John Boyd <jaboydjr@netwalk.com>)
  - moved bind-chroot-admin script to chroot package
  - bind-9.3.2-redhat_doc.patch is always applied (#231738)


author: Adam Tkac <atkac redhat com> 31:9.4.0-3.fc7
changelog:
  - prepared bind to merge review
  - added experimental idn support to bind-utils utils (not enabled by default yet)
  - change chroot policy in caching-nameserver post section
  - fixed bug in bind-chroot-admin - rootdir function is called properly now


author: Adam Tkac <atkac redhat com> 31:9.4.0-4.fc7
changelog:
  - removed query-source[-v6] options from caching-nameserver config
    (#209954, increase security)
  - throw away idn. It won't be ready in fc7


author: Adam Tkac <atkac redhat com> 31:9.4.0-7.fc7
changelog:
  - removed DEBUGINFO option because with this option (default) was bind
    builded with -O0 and without this flag no debuginfo package was produced.
    (I want faster bind => -O2 + debuginfo)
  - fixed zone finding (#236426)


author: Adam Tkac <atkac redhat com> 31:9.4.0-8.fc7
changelog:
  - improved "zone freeze patch" - if multiple zone with same name exists
    no zone is freezed
  - minor cleanup in caching-nameserver's config file
  - fixed race-condition in dbus code (#235809)
  - added forgotten restorecon statement in bind-chroot-admin


author: Adam Tkac <atkac redhat com> 31:9.4.1-3
changelog:
  - fixed bind-chroot-admin dynamic DNS handling (#239149)
  - updated zone-freeze patch to latest upstream
  - ldap sdb has been rewriten to latest api (#239802)


author: Adam Tkac <atkac redhat com> 31:9.4.1-4
changelog:
  - removed ldap-api patch and start using deprecated API
  - fixed minor problem in bind-chroot-admin script (#241103)


author: Adam Tkac <atkac redhat com> 31:9.4.1-5
changelog:
  - very minor compatibility change in bind-chroot-admin (line 215)
  - enabled IDN support by default and don't distribute IDN libraries
  - specfile cleanup
  - add dynamic directory to /var/named. This directory will be primarily used for
    dynamic DNS zones. ENABLE_ZONE_WRITE and SELinux's named_write_master_zones no longer exist


author: Adam Tkac <atkac redhat com> 31:9.4.1-6
changelog:
  - major changes in initscript. Could be LSB compatible now
  - removed caching-nameserver subpackage. Move configs from this
    package to main bind package as default configuration and major
    configuration cleanup


author: Adam Tkac <atkac redhat com> 31:9.4.1-7
changelog:
  - marked caching-nameserver as obsolete (#244604)
  - fixed typo in initscript (causes that named doesn't detect NetworkManager
    correctly)
  - next cleanup in configuration - moved configfiles into config.tar
  - removed delay between start & stop in restart function in named.init


author: Adam Tkac <atkac redhat com> 31:9.5.0a5-2
changelog:
  - minor changes in default configuration
  - fix h_errno assigment during resolver initialization (unbounded recursion, #245857)
  - removed wrong patch to #150288


author: Adam Tkac <atkac redhat com> 31:9.5.0a5-3.9
changelog:
  - removed bind-sdb package (default named has compiled SDB backend now)
  - integrated DLZ (Dynamically loadable zones) drivers
  - integrated GSS-TSIG support (RFC 3645)
  - build with -O0 (many new features, potential core dumps will be more useful)


author: Adam Tkac <atkac redhat com> 31:9.5.0a5-5
changelog:
  - integrated "autotools" patch for testing purposes (upstream will
    accept it in future, for easier building)


author: Adam Tkac <atkac redhat com> 32:9.5.0-6.a6
changelog:
  - updated to 9.5.0a6 which contains fixes for CVE-2007-2925 and
    CVE-2007-2926
  - fixed building on 64bits


author: Adam Tkac <atkac redhat com> 32:9.5.0-8.a6
changelog:
  - minor next improvements on autotools patch
  - dig and host utilities now using libidn instead idnkit for
    IDN support


author: Adam Tkac <atkac redhat com> 32:9.5.0-9.a6
changelog:
  - disable 64bit dlz driver patch on alpha and ia64 (#251298)
  - remove wrong malloc functions from lib/dns/spnego.c (#251853)


author: Adam Tkac <atkac redhat com> 32:9.5.0-10.a6
changelog:
  - dropped direct dependency to /etc/openldap/schema directory
  - changed hardcoded paths to macros
  - fired away code which configure LDAP server


author: Adam Tkac <atkac redhat com> 32:9.5.0-10.2.a6
changelog:
  - added new initscript option KEYTAB_FILE which specified where
    is located kerberos .keytab file for named service
  - obsolete temporary bind-9.5-spnego-memory_management.patch by
    bind-9.5-gssapictx-free.patch which conforms BIND coding standards
    (#251853)


author: Adam Tkac <atkac redhat com> 32:9.5.0-11.a6
changelog:
  - start using --disable-isc-spnego configure option
    - remove bind-9.5-spnego-memory_management.patch (source isn't
      compiled)


author: Adam Tkac <atkac redhat com> 32:9.5.0-11.1.a6
changelog:
  - removed end dots from Summary sections (skasal@redhat.com)
  - fixed wrong file creation by autotools patch (skasal@redhat.com)


author: Adam Tkac <atkac redhat com> 32:9.5.0-11.3.a6
changelog:
  - initscript failure message is now printed correctly (#277981,
    Quentin Armitage (quentin armitage org uk) )


author: Adam Tkac <atkac redhat com> 32:9.5.0-12.a6
changelog:
  - bind-9.5-2119_revert.patch and bind-9.5-fix_h_errno.patch are
    obsoleted by upstream bind-9.5-_res_errno.patch


author: Adam Tkac <atkac redhat com> 32:9.5.0-16.5.a6
changelog:
  - added bind-sdb again, contains SDB modules and DLZ modules
  - bind-9.3.1rc1-sdb.patch replaced by bind-9.5-sdb.patch


author: Adam Tkac <atkac redhat com> 32:9.5.0-17.a7
changelog:
  - 9.5.0a7
  - dropped patches (upstream)
    - bind-9.5-update.patch
    - bind-9.5-pool_badfree.patch
    - bind-9.5-_res_errno.patch


author: Adam Tkac <atkac redhat com> 32:9.5.0-18.4.a7
changelog:
  - bind-9.5-random_ports.patch was removed because upstream doesn't
    like it. query-source{,v6} options are sufficient (#391931)
  - bind-chroot-admin called restorecon on /proc filesystem (#405281)


author: Adam Tkac <atkac redhat com> 32:9.5.0-23.b1
changelog:
  - fixed initscript wait loop (#426382)
  - removed dependency on policycoreutils and libselinux (#426515)


author: Adam Tkac <atkac redhat com> 32:9.5.0-24.b1
changelog:
  - removed bind-9.3.2-prctl_set_dumpable.patch (upstream)
  - allow parallel building of libdns library
  - CVE-2008-0122


author: Adam Tkac <atkac redhat com> 32:9.5.0-26.b2
changelog:
  - build with -D_GNU_SOURCE (#431734)
  - improved fix for #253537, posttrans script is now used
  - improved fix for #400461
  - 9.5.0b2
    - bind-9.3.2b1-PIE.patch replaced by bind-9.5-PIE.patch
      - only named, named-sdb and lwresd are PIE
    - bind-9.5-sdb.patch has been updated
    - bind-9.5-libidn.patch has been updated
    - bind-9.4.0-sdb-sqlite-bld.patch replaced by bind-9.5-sdb-sqlite-bld.patch
    - removed bind-9.5-gssapi-header.patch (upstream)
    - removed bind-9.5-CVE-2008-0122.patch (upstream)
  - removed bind-9.2.2-nsl.patch
  - improved sdb_tools Makefile.in


author: Adam Tkac <atkac redhat com> 32:9.5.0-27.b2
changelog:
  - removed conditional build with libefence (use -fmudflapth instead)
  - fixed building of DLZ stuff (#432497)
  - do not build Berkeley DB DLZ backend
  - temporary build with --disable-linux-caps and without threads (#433102)
  - update named.ca file to affect IPv6 changes in root zone


author: Adam Tkac <atkac redhat com> 32:9.5.0-30.b3
changelog:
  - 9.5.0b3 release
  - dropped patches (upstream)
    - bind-9.5-transfer-segv.patch
    - bind-9.5-mudflap.patch
    - bind-9.5.0-generate-xml.patch
    - bind-9.5-libcap.patch


author: Adam Tkac <atkac redhat com> 32:9.5.0-32.b3
changelog:
  - reverted "any" patch, upstream says not needed
  - log EDNS failure only when we really switch to plain EDNS (#275091)
  - detect configuration file better


author: Adam Tkac <atkac redhat com> 32:9.5.0-33.rc1
changelog:
  - updated to 9.5.0rc1
  - merged patches
    - bind-9.5-libcap.patch
  - make binaries readable by others (#427826)


author: Adam Tkac <atkac redhat com> 32:9.5.0-36.1
changelog:
  - removed dns-keygen utility in favour of rndc-confgen -a (#449287)
  - some minor sample fixes (#449274)


author: Adam Tkac <atkac redhat com> 32:9.5.1-0.1.b1
changelog:
  - 9.5.1b1 release (CVE-2008-1447)
  - dropped bind-9.5-recv-race.patch because upstream doesn't want it


author: Adam Tkac <atkac redhat com> 32:9.5.1-0.3.b1
changelog:
  - static libraries are no longer supported
  - IP acls weren't merged correctly (#457175)
  - use fPIE on sparcv9/sparc64 (Dennis Gilmore)
  - add sparc64 to list of 64bit arches in spec (Dennis Gilmore)


author: Adam Tkac <atkac redhat com> 32:9.5.1-0.7.b2
changelog:
  - 9.5.1b2 release
  - patches merged
    - bind95-rh454783.patch
    - bind-9.5-edns.patch
    - bind95-rh450995.patch
    - bind95-rh457175.patch


author: Adam Tkac <atkac redhat com> 32:9.6.0-0.1.b1
changelog:
  - 9.6.0b1 release
  - don't build ODBC and Berkeley DB DLZ drivers
  - end of bind-chroot-admin script, copy config files to chroot manually
  - /proc doesn't have to be mounted to chroot
  - temporary use libbind from 9.5 series, noone has been released for 9.6 yet


author: Adam Tkac <atkac redhat com> 32:9.6.0-0.5.rc1
changelog:
  - 9.6.0rc1 release
  - patches merged
    - bind-9.2.0rc3-varrun.patch
    - bind-95-sdlz-include.patch
    - bind-96-libxml2.patch
  - fixed rare use-after-free problem in host utility (#452060)
  - enabled chase of DNSSEC signature chains in dig


author: Adam Tkac <atkac redhat com> 32:9.6.0-11.P1
changelog:
  - fall back to insecure mode when no supported DNSSEC algorithm is found
    instead of SERVFAIL
  - don't fall back to non-EDNS0 queries when DO bit is set


author: Adam Tkac <atkac redhat com> 32:9.6.1-0.1.b1
changelog:
  - 9.6.1b1 release
  - patches merged
    - bind-96-isc_header.patch
    - bind-95-rh469440.patch
    - bind-96-realloc.patch
    - bind9-fedora-0001.diff
  - use -version-number instead of -version-info libtool param


author: Martin Nagy <mnagy redhat com> 32:9.6.1-0.2.b1
changelog:
  - update the patch for dynamic loading of database backends
  - fix dns_db_unregister()
  - useradd now takes "-N" instead of "-n" (atkac, #495726)
  - print nicer error msg when zone file is actually a directory (atkac, #490837)


author: Martin Nagy <mnagy redhat com> 32:9.6.1-0.3.b1
changelog:
  - update the patch for dynamic loading of database backends
  - create %{_libdir}/bind directory
  - copy default named.conf to doc directory, shared with s-c-bind (atkac)


author: Adam Tkac <atkac redhat com> 32:9.6.1-1
changelog:
  - 9.6.1 release
  - simplify chroot maintenance. Important files and directories are mounted into
    chroot (see /etc/sysconfig/named for more info, #504596)
  - fix doc/named.conf.default perms


author: Adam Tkac <atkac redhat com> 32:9.6.1-2
changelog:
  - improved "chroot automount" patches (#504596)
  - host should fail if specified server doesn't respond (#507469)


author: Adam Tkac <atkac redhat com> 32:9.6.1-3
changelog:
  - fix broken symlinks in bind-libs (#509635)
  - fix typos in /etc/sysconfig/named (#509650)
  - add DEBUG option to /etc/sysconfig/named (#510283)


author: Adam Tkac <atkac redhat com> 32:9.6.1-9.P1
changelog:
  - next attempt to fix the postun trigger (#520385)
  - remove obsolete bind-9.3.1rc1-fix_libbind_includedir.patch


author: Adam Tkac <atkac redhat com> 32:9.7.0-0.2.a2
changelog:
  - improve chroot related documentation (#507795)
  - add NetworkManager dispatcher script to reload named when network interface is
    activated/deactivated (#490275)
  - don't set/unset named_write_master_zones SELinux boolean every time in
    initscript, modify it only when it's actually needed


author: Adam Tkac <atkac redhat com> 32:9.7.0-0.6.b1
changelog:
  - update to 9.7.0b1
  - add bind-pkcs11 subpackage to support PKCS11 compatible keystores for DNSSEC
    keys


author: Adam Tkac <atkac redhat com> 32:9.7.0-0.14.rc2
changelog:
  - obsolete dnssec-conf
  - automatically update configuration from old dnssec-conf based
  - improve default configuration; enable DLV by default
  - remove obsolete triggerpostun from bind-libs subpackage


author: Adam Tkac <atkac redhat com> 32:9.7.0-2
changelog:
  - improve automatic DNSSEC reconfiguration trigger
  - initscript now returns 2 in case that action doesn't exist (#523435)
  - enable/disable chroot when bind-chroot is installed/uninstalled


author: Adam Tkac <atkac redhat com> 32:9.7.1-0.1.b1
changelog:
  - update to 9.7.1b1
  - make /var/named/dynamic as a default directory for managed DNSSEC keys
  - add patch to get "managed-keys-directory" option working
  - patches merged
    - bind97-managed-keyfile.patch
    - bind97-rh554316.patch


author: Adam Tkac <atkac redhat com> 32:9.7.1-3.P1
changelog:
  - remove outdated Copyright.caching-nameserver file
  - remove rfc1912.txt, it is already located in %doc/rfc directory
  - move COPYRIGHT to the bind-libs subpkg
  - add COPYRIGHT to the -pkcs11 subpkg


author: Adam Tkac <atkac redhat com> 32:9.7.2-3.P2
changelog:
  - new bind-libs-lite and bind-lite-devel subpkgs which contain
    public version of BIND 9 libraries
  - don't ship devel files for internal version of BIND 9 libraries


author: Adam Tkac <atkac redhat com> 32:9.7.2-5.P2
changelog:
  - move BIND9 internal libs back to %{_libdir}
  - add "-export" suffix to public libraries (-lite subpkg)


author: Adam Tkac <atkac redhat com> 32:9.7.3-0.3.b1
changelog:
  - fix "service named status" when used with named-sdb
  - don't check MD5, size and mtime of sysconfig/named


author: Adam Tkac <atkac redhat com> 32:9.7.3-1
changelog:
  - update to 9.7.3
  - fix dig +trace on dualstack systems (#674334)
  - fix linkage order when building on system with older BIND (#665971)
  - reduce number of gcc warnings


author: Adam Tkac <atkac redhat com> 32:9.8.1-0.1.rc1
changelog:
  - update to 9.8.1rc1
  - patches merged
    - bind97-rh674334.patch
    - bind97-cleanup.patch
    - bind98-includes.patch


author: Adam Tkac <atkac redhat com> 32:9.8.1-0.2.rc1
changelog:
  - fix rare race condition in request.c
  - print "the working directory is not writable" as debug message
  - re-add configtest target to initscript
  - initscript: sybsys name is always named, not named-sdb
  - nsupdate returned zero when target zone didn't exist (#700097)
  - nsupdate could have failed if server has multiple IPs and the first
    was unreachable (#714049)


author: Adam Tkac <atkac redhat com> 32:9.8.1-0.3.rc1
changelog:
  - fix DLZ related compilation issues
  - make /etc/named.{root,iscdlv}.key world-readable
  - add bind-libs versioned requires to bind pkg


author: Adam Tkac <atkac redhat com> 32:9.8.1-1
changelog:
  - update to 9.8.1
  - ship /etc/trusted-key.key (needed by dig)
  - use select instead of epoll in export libs (#735103)


author: Adam Tkac <atkac redhat com> 32:9.9.0-0.3.b2
changelog:
  - update to 9.9.0b2 (CVE-2011-4313)
  - patches merged
    - bind97-rh700097.patch
    - bind99-cinfo.patch


author: Adam Tkac <atkac redhat com> 32:9.9.0-1
changelog:
  - update to 9.9.0
  - load dynamic DBs later (and update dyndb patch)
  - fix memory leak in named during processing of rndc command
  - don't call `rndc-confgen -a` in "post" section
  - fix some packaging bugs in bind-chroot


author: Tomas Hozza <thozza@redhat.com> 32:9.9.1-6.P2
changelog:
  - Fixed bad path to systemctl in /etc/NetworkManager/dispatcher.d/13-named (#844047)
  - Fixed path to libdb.so in config.dlz.in


author: Tomas Hozza <thozza@redhat.com> 32:9.9.1-9.P2
changelog:
  - fixed SPEC file so it comply with new systemd-rpm macros guidelines (#850045)
  - changed %define macros to %global and fixed several rpmlint warnings


author: Adam Tkac <atkac redhat com> 32:9.9.2-1
changelog:
  - update to 9.9.2
  - bind97-rh714049.patch has been dropped
  - patches merged
    - bind98-rh816164.patch


author: Adam Tkac <atkac redhat com> 32:9.9.2-6.P1
changelog:
  - generate /etc/rndc.key during named service startup if doesn't exist
  - increase startup timeout in systemd units to 90sec (default)
  - fix IDN related statement in dig.1 manpage


author: Tomas Hozza <thozza@redhat.com> 32:9.9.2-7.P1
changelog:
  - Corrected IP addresses in named.ca (#901741)
  - mount/umount /var/named in setup-named-chroot.sh as the last one (#904666)


author: Adam Tkac <atkac redhat com> 32:9.9.3-0.1.rc1
changelog:
  - update to 9.9.3rc1
  - bind-96-libtool2.patch has been merged
  - fix bind tmpfiles.d for named.pid /run migration (#920713)


author: Tomas Hozza <thozza@redhat.com> 32:9.9.3-0.5.rc1
changelog:
  - Include recursion Warning in named.conf and named.conf.sample (#740894)
  - Include managed-keys-directory statement in named.conf.sample (#948026)


author: Tomas Hozza <thozza@redhat.com> 32:9.9.3-0.6.rc2
changelog:
  - update to 9.9.3rc2
  - part of bind97-exportlib.patch not needed any more
  - bind-9.9.1-P2-multlib-conflict.patch modified to reflect latest source
  - rl-9.9.3rc1.patch -> rl-9.9.3rc2.patch
  - bind99-opts.patch merged


author: Tomas Hozza <thozza@redhat.com> 32:9.9.3-1
changelog:
  - update to 9.9.3
  - install dns/update.h header
  - update RRL patch to the latest version 9.9.3-rl.150.20


author: Tomas Hozza <thozza@redhat.com> 32:9.9.4-5
changelog:
  - Create symlink /var/named/chroot/var/run -> /var/named/chroot/run
  - Added session-keyfile statement into default named.conf since we use /run/named


author: Tomas Hozza <thozza@redhat.com> 32:9.9.4-10
changelog:
  - Split chroot package for named and named-sdb
  - Extract setting-up/destroying of chroot to a separate systemd service (#997030)


author: Tomas Hozza <thozza@redhat.com> 32:9.9.5-2
changelog:
  - dlz_dlopen driver could return the wrong error leading to a segfault (#1052781)
  - Fix race condition when freeing fetch object (ISC-Bugs #35385)


author: Tomas Hozza <thozza@redhat.com> - 32:9.9.6-1
changelog:
  - Update to 9.9.6
  - drop merged patches and rebase some of existing patches
  - Add architecture specific dependencies.
  - Fix assert in dig when using +sigchase (#985918)


author: Tomas Hozza <thozza@redhat.com> - 32:9.9.6-2
changelog:
  - Added native PKCS#11 functionality (#1097752)
  - bind-sdb now requires bind due to configuration and other utilities
  - bind-pkcs11 now requires bind due to configuration and other utilities


author: Tomas Hozza <thozza@redhat.com> - 32:9.9.6-4
changelog:
  - Fixed systemctl path in logrotate configuration (#1148360)
  - drop engine_pkcs11 dependency, since we use native PKCS#11 implementation


author: Tomas Hozza <thozza@redhat.com> - 32:9.10.2-0.1.rc1
changelog:
  - update to 9.10.2rc1
  - fix nsupdate server auto-detection (#1184151)
  - drop merged patch bind99-rh985918.patch


author: Tomas Hozza <thozza@redhat.com> - 32:9.10.2-1
changelog:
  - update to 9.10.2 stable
  - remove parallel-build patch after discussion with upstream [ISC-Bugs #38739]


author: Tomas Hozza <thozza@redhat.com> - 32:9.10.2-2
changelog:
  - enable tuning for large systems - increases hardcoded internal limits
  - enable GeoIP access control feature


author: Robert Scheck <robert@fedoraproject.org> - 32:9.10.3-8.P2
changelog:
  - Remove unrecognized build options for %configure
  - Own %{_includedir}/bind9 directory in -lite-devel
  - Fixed building without (optional) PKCS#11 support


author: Tomas Hozza <thozza@redhat.com> - 32:9.10.3-9.P2
changelog:
  - Commented out bindkeys-file statement in default configuration (#1223365#c3)
  - Removed unrecognized configure option --enable-developer
  - Added configure option --enable-full-report to get report on enabled features


author: Tomas Hozza <thozza@redhat.com> - 32:9.10.3-13.P4
changelog:
  - Remove NM dispatcher script, since it is not needed any more (#1277257)
  - Replaced After=network-online.target with After=network.target in all unit files


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.0-6.P2
changelog:
  - RTLD_DEEPBIND conflicts with pkcs11 libraries, skip it for dyndb (#1410433)
  - Fix some rpm warnings


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.2-1
changelog:
  - Update to 9.11.2
  - Add recursing and secroots file into default and sample config
  - Fix nsupdate GSSAPI auth against AD server (#1484451)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.2-2
changelog:
  - Build against mariadb-connector-c-devel (#1493615)
  - Include DNSKEY 20326 also in trusted-key.key (#1505476)
  - Fix dynamic symbols conflict with ldap (#1205168)
  - Use hmac-sha256 for new RNDC keys (#1508003)
  - Include protocols and services in chroot


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.2-4
changelog:
  - Enable unit tests with kyua tool (#1532694)
  - Provide internal tool to prepare softhsm token storage
  - Proper fix for python3-bind subpackage directory ownership (#1522944)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.2-11.P1
changelog:
  - Use versioned provides
  - Fix starting of unit tests
  - Forward export libs path to isc-config
  - Rename export devel subpackage to bind-export-devel


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.3-2.b1
changelog:
  - Require openssl-devel and libcap-devel from bind-export-devel
  - Conflict with bind99-devel
  - Change spec globals to rpmbuild --with feature


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.3-15
changelog:
  - Use new config file named-chroot.files for chroot setup (#1429656)
  - Fix chroot devices file verification (#1592873)
  - Prevent errors on bind-chroot uninstall when running (#1600583)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.4-2
changelog:
  - Install generated manual pages
  - Remove system-config-bind from manual
  - Disable GeoIP support (#1609856)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.4-5.P1
changelog:
  - Update to 9.11.4-P1
  - Adds root key sentinel support
  - Large IXFR zone transfers are rejected to prevent journal corruption
  - Fixes CVE-2018-5740


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.4-7.P1
changelog:
  - Fix chroot devices upgrade warning (#1592872)
  - Automatically replace obsoleted ISC DLV key with root key (#1595782)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.4-19.P2
changelog:
  - Add support for OpenSSL provided random data
  - Disable often failing unit test random_test
  - Add /dev/urandom to chroot


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.12-2
changelog:
  - Add GeoLite2 support (#1564443)
  - Add GeoIP to bind-chroot (#1497646)
  - Fix wrong default GeoIP directory (#1768258)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.20-2
changelog:
  - Add manual page for dnssec-importkey-pkcs11 (#1666785)
  - Add versioned depends to all library subpackages


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.20-5
changelog:
  - Fix tsig-request verify (CVE-2020-8622)
  - Prevent PKCS11 daemon crash on crafted packet (CVE-2020-8623)
  - Correct update-policy type subdomain to match documentation (CVE-2020-8624)
  - Include available test


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.25-1
changelog:
  - Update to 9.11.25
  - Require libcap from devel package
  - Fix crash on NTA recheck failure (#1893761)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.26-2
changelog:
  - Add DNSTAP support (#1854148), new dnstap-read tool
  - Add JSON support in statistics-channel (#1899257)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.26-4
changelog:
  - Possible assertion failure on DNAME processing (CVE-2021-25215)
  - Insufficient IXFR checks could lead to assertion failure (CVE-2021-25214)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.36-14
changelog:
  - Speed up parsing of DNS messages with many different names (CVE-2023-4408)
  - Prevent increased CPU consumption in DNSSEC validator (CVE-2023-50387 CVE-2023-50868)
  - Do not use header_prev in expire_lru_headers


author: Liwei Ge <liwei.glw@alibaba-inc.com> - 32:9.11.36-14.0.1
changelog:
  - fix CVE-2023-2828
  - Fix CVE-2023-3341 (Liu Xiaoyang)
  - disable 64bit dlz driver patch on alpha, ia64 and sw_64 (#251298).(Weisson@linux.alibaba.com)
  - Fix CVE-2023-4408 (songkai01@inspur.com)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.36-16.1
changelog:
  - Resolve CVE-2024-1975
  - Resolve CVE-2024-1737
  - Add ability to change runtime limits for max types and records per name


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.36-16.3
changelog:
  - Limit additional section records CPU processing (CVE-2024-11187)
  - Correct ANY queries to not have additional data appended


author: Yara Ahmad <yahmad@redhat.com> - 2.30-121
changelog:
  - Fix an illegal memory access when parsing an ELF file containing corrupt symbol version information.  (#2164700)


author: Xue haolin <xuehaolin@openanolis.org> - 2.30-123.0.1
changelog:
  - Rebrand to Anolis OS.
  - Add loongarch support. (lixing@loongson.cn)
  - Fixup LoongArch wrong debug line. (lixing@loongson.cn)
  - Add LoongArch missing opcode. (lixing@loongson.cn)
  - Fixup gas SIGSEGV for extremely long function name. (lixing@loongson.cn)
  - change loong64 to loongarch64. (lixing@loongson.cn)
  - Add ifunc support. (lixing@loongson.cn)
  - Delete R_LARCH_NONE for eh_frame. (lixing@loongson.cn)
  - Fixup pr21964 bug. (lixing@loongson.cn)
  - Add 3A6000 opcode. (lixing@loongson.cn)
  - Fix some testsuite error. (lixing@loongson.cn)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - upgraded again to 2.8.1.0.28 (at least on alpha now egcs will compile)
  - added info packages handling


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - updated to 2.8.1.0.29 (HJ warned me that this thing is a moving target...
    :-)
  - "fixed" the damn make install command so that all tools get installed


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - added ARM patch from philb
  - version 2.9.1.0.19a
  - added a patch to allow arm* arch to be identified as an ARM


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - version  2.9.1.0.23
  - patch to make texinfo documentation compile
  - auto rebuild in the new build environment (release 2)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - back out very *stupid* sparc patch done by HJLu. People, keep out of
    things you don't understand.
  - add alpha relax patch from rth


author: Jim Kingdon
changelog:
  - No source/spec changes, just rebuilding with egcs-1.1.2-18 because
    the older egcs was miscompling gprof.


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - 2.11.90.0.8
    - some SHF_MERGE suport fixes
  - don't build with tooldir /usrusr instead of /usr (#40937)
  - reserve few .dynamic entries for prelinking


author: Jakub Jelinek <jakub@redhat.com> 2.11.90.0.8-6
changelog:
  - support for -z combreloc
  - remove .dynamic patch, -z combreloc patch does this better
  - set STT_FUNC default symbol sizes in .endp directive on IA-64


author: Jakub Jelinek <jakub@redhat.com> 2.11.90.0.8-8
changelog:
  - on IA-64, put crtend{,S}.o's .IA_64.unwind section last in
    .IA_64.unwind output section (for compatibility with 7.1 eh)


author: Jakub Jelinek <jakub@redhat.com> 2.11.90.0.8-11
changelog:
  - add iplt support for IA-64 (Richard Henderson)
  - switch to new section flags for SHF_MERGE and SHF_STRINGS, put
    in compatibility code
  - "s" section flag for small data sections on IA-64 and Alpha
    (Richard Henderson)
  - fix sparc64 .plt[32768+] handling
  - don't emit .rela.stab on sparc


author: Jakub Jelinek <jakub@redhat.com> 2.11.92.0.5-1
changelog:
  - update to 2.11.92.0.5
    - binutils localization (#45148)
    - fix typo in REPORT_BUGS_TO (#54325)
  - support files bigger than 2GB in strings (#54406)


author: Jakub Jelinek <jakub@redhat.com> 2.11.92.0.12-1
changelog:
  - update to 2.11.92.0.12
    - optimize .dynstr and .shstrtab sections (#55524)
    - fix ld.1 glitch (#55459)
  - turn relocs against SHF_MERGE local symbols with zero addend
    into STT_SECTION + addend
  - remove man pages for programs not included (nlmconv, windres, dlltool;
    - add BuildRequires for texinfo


author: Jakub Jelinek <jakub@redhat.com> 2.11.92.0.12-3
changelog:
  - H.J.'s patch to avoid crash if input files are not ELF
  - don't crash if a SHF_MERGE for some reason could not be merged
  - fix objcopy/strip to preserve SHF_MERGE sh_entsize
  - optimize .eh_frame sections, add PT_GNU_EH_FRAME support
  - support anonymous version tags in version script


author: Jakub Jelinek <jakub@redhat.com> 2.11.92.0.12-7
changelog:
  - as ld is currently not able to shrink input sections to zero size
    during discard_info, build a fake minimal CIE in that case
  - update elf-strtab patch to what was commited


author: Jakub Jelinek <jakub@redhat.com> 2.11.93.0.2-2
changelog:
  - trade one saved runtime page for data segment (=almost always not shared)
    for up to one page of disk space where possible


author: Jakub Jelinek <jakub@redhat.com> 2.11.93.0.2-4
changelog:
  - add DW_EH_PE_absptr -> DW_EH_PE_pcrel optimization for shared libs,
    if DW_EH_PE_absptr cannot be converted that way, don't build the
    .eh_frame_hdr search table


author: Jakub Jelinek <jakub@redhat.com> 2.11.93.0.2-12
changelog:
  - fix .hidden handling on SPARC (Richard Henderson)
  - don't crash when linking -shared non-pic code with SHF_MERGE
  - fix .eh_frame_hdr for DW_EH_PE_aligned
  - correctly adjust DW_EH_PE_pcrel encoded personalities in CIEs


author: Jakub Jelinek <jakub@redhat.com> 2.12.90.0.15-1
changelog:
  - update to 2.12.90.0.15
  - TLS .tbss fix
  - don't use rpm %configure macro, it is broken too often (#69366)


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.2-1
changelog:
  - update to 2.13.90.0.2
    - fix ld TLS assertion failure (#70084)
    - fix readelf --debug-dump= handling to match man page and --help
      (#68997)
  - fix _GLOBAL_OFFSET_TABLE gas handling (#70241)


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.2-3
changelog:
  - allow addends for IA-32 TLS @tpoff, @ntpoff and @dtpoff
  - clear memory at *r_offset of dynamic relocs on PPC
  - avoid ld crash if accessing non-local symbols through LE relocs
  - new IA-32 TLS relocs, bugfixes and testcases
  - use brl insn on IA-64 (Richard Henderson)
  - fix R_IA64_PCREL21{M,F} handling (Richard Henderson)
  - build in separate builddir, so that gasp tests don't fail
  - include localization


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.4-1
changelog:
  - update to 2.13.90.0.4
  - x86-64 TLS support
  - some IA-32 TLS fixes
  - some backported patches from trunk
  - include opcodes, ld, gas and bfd l10n too


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.4-2
changelog:
  - fix orphan .rel and .rela section placement with -z combreloc (Alan Modra)
  - skip incompatible linker scripts when searching for libraries


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.10-1
changelog:
  - update to 2.13.90.0.10
  - add a bi-arch patch for sparc/s390/x86_64
  - add --enable-64-bit-bfd on sparc, s390 and ppc


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.10-3
changelog:
  - fix names and content of alpha non-alloced .rela.* sections (#76583)
  - delete unpackaged files from the buildroot


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.10-4
changelog:
  - pad .rodata.cstNN sections at the end if they aren't sized to multiple
    of sh_entsize
  - temporary patch to make .eh_frame and .gcc_except_table sections
    readonly if possible (should be removed when AUTO_PLACE is implemented)
  - fix .PPC.EMB.apuinfo section flags


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.16-8
changelog:
  - alpha TLS fixes
  - use .debug_line directory table to make the section tiny bit smaller
  - libtool fix from Jens Petersen


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.18-2
changelog:
  - fix SEARCH_DIR on x86_64/s390x
  - fix Alpha --relax
  - create DT_RELA{,SZ,ENT} on s390 even if there is just .rela.plt
    and no .rela.dyn section
  - support IA-32 on IA-64 (#83752)
  - .eh_frame_hdr fix (Andreas Schwab)


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.18-3
changelog:
  - handle .symver x, x@FOO in ld such that relocs against x become
    dynamic relocations against x@FOO (#83325)
  - two PPC64 TLS patches (Alan Modra)


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.18-5
changelog:
  - fix the previous .symver change
  - remove libbfd.so and libopcodes.so symlinks, so that other packages
    link statically, not dynamically against libbfd and libopcodes
    whose ABI is everything but stable


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.18-6
changelog:
  - don't clear elf_link_hash_flags in the .symver patch
  - only use TC_FORCE_RELOCATION in s390's TC_FORCE_RELOCATION_SUB_SAME
    (Alan Modra)


author: Jakub Jelinek <jakub@redhat.com> 2.13.90.0.20-4
changelog:
  - fix ppc32 plt reference counting
  - don't include %{_prefix}/%{_lib}/debug in the non-debuginfo package
    (#87729)


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.4-1
changelog:
  - update to 2.14.90.0.4-1
  - gas CFI updates (Richard Henderson)
  - dynamic executables (Ulrich Drepper)


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.4-2
changelog:
  - rename ld --dynamic option to --pic-executable or --pie
  - fix ld --help output
  - document --pie/--pic-executable in ld.info and ld.1


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.4-7
changelog:
  - some CFI updates/fixes
  - don't create dynamic relocations against symbols defined in PIE
    exported from its .dynsym


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.4-8
changelog:
  - remove some unnecessary provides in ppc64 linker script
    which were causing e.g. empty .ctors/.dtors section creation


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.4-9
changelog:
  - ensure R_PPC64_{RELATIVE,ADDR64} have *r_offset == r_addend
    and the other relocs have *r_offset == 0


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.4-13
changelog:
  - update CFI stuff to 2003-06-18
  - make sure .eh_frame is aligned to 8 bytes on 64-bit arches,
    remove padding within one .eh_frame section


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.4-14
changelog:
  - added support for Intel Prescott instructions
  - fix hint@pause for ia64
  - add workaround for LTP sillyness (#97934)


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.4-16
changelog:
  - fix readelf -d on IA-64
  - build libiberty.a with -fPIC, so that it can be lined into shared
    libraries


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.4-17
changelog:
  - fix ia64 -pie support
  - require no undefined non-weak symbols in PIEs like required for normal
    binaries


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.4-19
changelog:
  - fix -pie support on amd64, s390, s390x and ppc64
  - issue relocation overflow errors for s390/s390x -fpic code when
    accessing .got slots above 4096 bytes from .got start


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.4-22
changelog:
  - fix elfNN_ia64_dynamic_symbol_p (Richard Henderson, #86661)
  - don't access memory beyond what was allocated in readelf
    (Richard Henderson)


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.5-4
changelog:
  - fix ppc64 elfvsb linker tests
  - some more 64-bit cleanliness fixes, give ppc64 fdesc symbols
    type and size (Alan Modra)


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.6-1
changelog:
  - update to 2.14.90.0.6
  - speed up string merging (Lars Knoll, Michael Matz, Alan Modra)
  - speed up IA-64 local symbol handling during linking


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.6-4
changelog:
  - fix assembly parsing of foo=(.-bar)/4 (Alan Modra)
  - fix IA-64 assembly parsing of (p7) hint @pause


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.8-2
changelog:
  - fix testcases on AMD64
  - fix .got's sh_entsize on IA32/AMD64
  - set COMMONPAGESIZE on s390/s390x
  - set COMMONPAGESIZE on ppc32 (Alan Modra)


author: Jakub Jelinek <jakub@redhat.com> 2.14.90.0.8-8
changelog:
  - with -z now without --enable-new-dtags create DT_BIND_NOW
    dynamic entry in addition to DT_FLAGS_1 with DF_1_NOW bit set


author: Jakub Jelinek <jakub@redhat.com> 2.15.90.0.1.1-2
changelog:
  - update to 20040326 CVS
    - fix ppc64 weak .opd symbol handling (Alan Modra, #119086)
  - fix .tbss handling bug introduced


author: Jakub Jelinek <jakub@redhat.com> 2.15.90.0.3-4
changelog:
  - -z relro ppc/ppc64/ia64 fixes
  - change x86-64 .plt symbol st_size handling to match ia32
  - prettify objdump -d output


author: Jakub Jelinek <jakub@redhat.com> 2.15.91.0.2-4
changelog:
  - kill ppc64 dot symbols (Alan Modra)
  - objdump -d support for objects without dot symbols
  - support for overlapping ppc64 .opd entries


author: Jakub Jelinek <jakub@redhat.com> 2.15.91.0.2-5
changelog:
  - various ppc64 make check fixes when using non-dot-syms gcc (Alan Modra)
  - fix --gc-sections
  - on ia64 create empty .gnu.linkonce.ia64unw*.* sections for
    .gnu.linkonce.t.* function doesn't need unwind info


author: Jakub Jelinek <jakub@redhat.com> 2.15.91.0.2-7
changelog:
  - resolve all undefined ppc64 .* syms to the function bodies through
    .opd, not just those used in brach instructions (Alan Modra)


author: Jakub Jelinek <jakub@redhat.com> 2.15.91.0.2-8
changelog:
  - fix linker segfaults on input objects with SHF_LINK_ORDER with
    incorrect sh_link (H.J.Lu, Nick Clifton, #130198, BZ #290)


author: Jakub Jelinek <jakub@redhat.com> 2.15.91.0.2-9
changelog:
  - avoid almost 1MB (sparse) gaps in the middle of -z relro
    libraries on x86-64 (Andreas Schwab)
  - fix -z relro to make sure end of PT_GNU_RELRO segment is always
    COMMONPAGESIZE aligned


author: Jakub Jelinek <jakub@redhat.com> 2.15.92.0.2-3
changelog:
  - revert Sep 09 change to make ppc L second argument e.g. for tlbie
    non-optional
  - fix stripping of prelinked binaries and libraries (#133734)
  - allow strings(1) on 32-bit arches to be used again with > 2GB
    files (#133555)


author: Jakub Jelinek <jakub@redhat.com> 2.15.92.0.2-10
changelog:
  - avoid unnecessary gap with -z relro showing on i686 libc.so
  - ppc64 --emit-relocs fix (Alan Modra)
  - don't crash if STT_SECTION symbol has incorrect st_shndx (e.g. SHN_ABS,
    as created by nasm; #142181)
  - don't try to make absptr LSDAs relative if they don't have relocations
    against them (Alan Modra, #141162)


author: Jakub Jelinek <jakub@redhat.com> 2.15.94.0.2-1
changelog:
  - update to 2.15.94.0.2
  - fix .note.GNU-stack/PT_GNU_STACK computation in linker on ppc64 (#147296)
  - fix stripping of binaries/libraries that have empty sections right before
    .dynamic section (with the same starting address; #144038)
  - handle AS_NEEDED (...) in linker script INPUT/GROUP


author: Jakub Jelinek <jakub@redhat.com> 2.15.94.0.2-3
changelog:
  - fix buffer overflows in readelf (#149506)
  - move c++filt to binutils from gcc-c++, conflict with gcc-c++ < 4.0 (#86333)


author: Jakub Jelinek <jakub@redhat.com> 2.16.90.0.3-1
changelog:
  - update to 2.16.90.0.3
  - update to 20050615 CVS
    - ppc32 secure PLT support (Alan Modra)
  - further bfd/readelf robustification


author: Jakub Jelinek <jakub@redhat.com> 2.16.91.0.1-3
changelog:
  - fix buffer overflow in readelf ia64 unwind printing code
  - use vsnprintf rather than vsprintf in gas diagnostics (Tavis Ormandy)
  - fix ld-cdtest when CFLAGS contains -fexceptions


author: Jakub Jelinek <jakub@redhat.com> 2.16.91.0.2-2
changelog:
  - don't complain about relocs to discarded sections in ppc32
    .got2 sections (Alan Modra, PR target/17828)


author: Jakub Jelinek <jakub@redhat.com> 2.16.91.0.5-1
changelog:
  - update to 2.16.91.0.5
  - don't error about .toc1 references to discarded sectiosn on ppc64
    (#175944)


author: Jakub Jelinek <jakub@redhat.com> 2.16.91.0.6-1
changelog:
  - update to 2.16.91.0.6
    - fix ppc64 --gc-sections
    - disassembler fixes for x86_64 cr/debug regs
    - fix linker search order for DT_NEEDED libs


author: Jakub Jelinek <jakub@redhat.com> 2.16.91.0.6-2
changelog:
  - add MNI support on i?86/x86_64 (#183080)
  - support S signal frame augmentation flag in .eh_frame,
    add .cfi_signal_frame support (#175951, PR other/26208, BZ#300)


author: Jakub Jelinek <jakub@redhat.com> 2.16.91.0.6-6
changelog:
  - fix ld error message formatting, so that collect2 parser can
    parse it again for g++ -frepo (#187142)


author: Jakub Jelinek <jakub@redhat.com> 2.17.50.0.2-1
changelog:
  - update to 2.17.50.0.2
  - update from CVS to 20060601
  - speed up the ELF linker by caching the result of kept section check
    (H.J. Lu)


author: Jakub Jelinek <jakub@redhat.com> 2.17.50.0.2-3
changelog:
  - fix two places in ld that misbehaved with MALLOC_PERTURB_=N
  - fix .tls_common handling in relocatable linking


author: Jakub Jelinek <jakub@redhat.com> 2.17.50.0.2-8
changelog:
  - add support for new AMDFAM10 instructions (#198281, IT#97662)
  - add -march=/-mtune= gas support on x86/x86-64
  - x86/x86-64 nop insn improvements
  - fix DT_GNU_HASH shift count value computation


author: Jakub Jelinek <jakub@redhat.com> 2.17.50.0.6-2
changelog:
  - update to 2.17.50.0.6
    - fix for section relative linker script defined symbols in
      empty sections (#207598, BZ#3267)
    - fix handling of DW_CFA_set_loc in .eh_frame optimizations
    - fix R_PPC_{PLT,GOT{,_TLSGD,_TLSLD,_TPREL,_DTPREL}}16_HA relocation
      handling with weak undefined symbols (Alan Modra, #211094)


author: Jakub Jelinek <jakub@redhat.com> 2.17.50.0.7-1
changelog:
  - update to 2.17.50.0.7
    - .cfi_personality and .cfi_lsda directives, per subsection .cfi_*
      directives, better .eh_frame CIE merging


author: Jakub Jelinek <jakub@redhat.com> 2.17.50.0.12-1
changelog:
  - update to 2.17.50.0.12
  - revert the misdesigned LD_SYMBOLIC{,_FUNCTIONS} env var support,
    only support -Bsymbolic/-Bsymbolic-functions/--dynamic-list*


author: Jakub Jelinek <jakub@redhat.com> 2.17.50.0.12-3
changelog:
  - don't require matching ELF_OSABI for target vecs with ELFOSABI_NONE,
    only prefer specific osabi target vecs over the generic ones
    (H.J.Lu, #230964, BZ#3826)
  - build libbfd.so and libopcodes.so with -Bsymbolic-functions


author: Jakub Jelinek <jakub@redhat.com> 2.17.50.0.17-4
changelog:
  - don't kill the %{_gnu} part of target name on arm
    (Lennert Buytenhek, #243516)
  - create just one PT_NOTE segment header for all consecutive SHT_NOTE
    sections


author: Jakub Jelinek <jakub@redhat.com> 2.17.50.0.18-1
changelog:
  - update to 2.17.50.0.18
    - GPLv3+
    - preserve .note.gnu.build-id in objcopy --only-keep-debug (#251935)
    - fix sparc64/alpha broken by --build-id patch (#252936)
  - update License tag
  - fix ld crash with --build-id and non-ELF output format (Alan Modra, BZ#4923)


author: Jakub Jelinek <jakub@redhat.com> 2.18.50.0.4-2
changelog:
  - revert aranges optimization (Alan Modra, BZ#5303, BZ#5755)
  - fix ld-shared testcase for GCC 4.3 (H.J. Lu)


author: Jan Kratochvil <jan.kratochvil@redhat.com> 2.18.50.0.6-4
changelog:
  - include the `dist' tag in the Release number
  - libbfd.a symbols visibility is now hidden (for #447426, suggested by Jakub)


author: Jan Kratochvil <jan.kratochvil@redhat.com> 2.18.50.0.8-1
changelog:
  - Update to 2.18.50.0.8.
    - Drop the .clmul -> .pclmul renaming backport.
  - Add %{binutils_target} macro to support building cross-binutils.
    (David Woodhouse)
  - Support `--without testsuite' to suppress the testsuite run.
  - Support `--with debug' to build without optimizations.
  - Refresh the patchset with fuzz 0 (for new rpmbuild).
  - Enable the spu target on ppc/ppc64 (BZ 455242).


author: Jan Kratochvil <jan.kratochvil@redhat.com> 2.18.50.0.8-2
changelog:
  - Fix parsing elf64-i386 files for kdump PAE vmcore dumps (BZ 457189).
  - Turn on 64-bit BFD support for i386, globally enable AC_SYS_LARGEFILE.
  - `--with debug' builds now with --disable-shared.
  - Removed a forgotten unused ld/eelf32_spu.c workaround from 2.18.50.0.8-1.


author: Jan Kratochvil <jan.kratochvil@redhat.com> 2.18.50.0.9-1
changelog:
  - Update to 2.18.50.0.9.
    - Drop the ppc-only spu target pre-build stage (BZ 455242).
    - Drop parsing elf64-i386 files for kdump PAE vmcore dumps (BZ 457189).
  - New .spec BuildRequires zlib-devel (/-static) for compressed sections.
  - Update .spec Buildroot to be more unique.


author: Jan Kratochvil <jan.kratochvil@redhat.com> 2.18.50.0.9-2
changelog:
  - Package review, analysed by Jon Ciesla and Patrice Dumas (BZ 225615).
   - build back in the sourcedir without problems as gasp is no longer included.
   - Fix the install-info requirement.
   - Drop the needless gzipping of the info files.
   - Provide Obsoletes versions.
   - Use the %configure macro.


author: Jan Kratochvil <jan.kratochvil@redhat.com> 2.18.50.0.9-3
changelog:
  - Provide libbfd.so and libopcodes.so for automatic dependencies (BZ 463101).
  - Fix .eh_frame_hdr build on C++ files with discarded common groups (BZ 458950).
  - Provide --build and --host to fix `rpmbuild --target' biarch builds.
  - Include %{binutils_target}- filename prefix for binaries for cross builds.
  - Fix multilib conflict on %{_prefix}/include/bfd.h's BFD_HOST_64BIT_LONG_LONG.


author: Jan Kratochvil <jan.kratochvil@redhat.com> 2.18.50.0.9-6
changelog:
  - binutils-devel now requires zlib-devel (BZ 463101 comment 5).
  - Fix complains on .gnu.linkonce.r relocations to their discarded
    .gnu.linkonce.t counterparts.


author: Jan Kratochvil <jan.kratochvil@redhat.com> 2.18.50.0.9-7
changelog:
  - Fix %{_prefix}/include/bfd.h on 32-bit hosts due the 64-bit BFD target
    support from 2.18.50.0.8-2 (BZ 468495).


author: Nick Clifton <nickc@redhat.com> 2.19.50.0.1
changelog:
  - Rebase sources on 2.19.50.0.1 tarball.  Update all patches, trimming
    those that are no longer needed.


author: Nick Clifton <nickc@redhat.com> 2.19.50.0.1-8
changelog:
  - Add build-id patch to ensure that section contents are incorporated
    into a build id.  (BZ 472152)


author: Nick Clifton <nickc@redhat.com> 2.19.51.0.11-28
changelog:
  - Rebase sources on 2.19.51.0.13 tarball.  Remove redundant orphan section placement patch. (BZ 512937)


author: Nick Clifton <nickc@redhat.com> 2.20.51.0.2-1
changelog:
  - Rebase on 2.20 tarball.
  - Remove redundant moxie patch.
  - Remove redundant unique is global patch.
  - Remove redundant cxxfilt java doc patch.


author: Jan Kratochvil <jan.kratochvil@redhat.com> 2.20.51.0.2-2
changelog:
  - Fix rpm --excludedocs (BZ 515922).
  - Fix spurious scriplet errors by `exit 0'. (BZ 517979, Nick Clifton)


author: Nick CLifton <nickc@redhat.com> 2.20.51.0.2-3
changelog:
  - Rename --add-needed to --copy-dt-needed-entries and improve error message about unresolved symbols in DT_NEEDED DSOs.


author: Jakub Jelinek <jakub@redhat.com> 2.20.51.0.2-4
changelog:
  - Fix ld -s with IRELATIVE relocations.  (BZ 533321, PR ld/10911)
  - Add AMD Orochi LWP support, fix FMA4 support.


author: Nick Clifton <nickc@redhat.com> - 2.20.51.0.7-1
changelog:
  - Rebase on 2.20.51.0.7 tarball.
  - Delete redundant patches:
    binutils-2.20.51.0.2-add-needed.patch,
    binutils-2.20.51.0.2-do-not-set-ifunc.patch,
    binutils-2.20.51.0.2-enable-gold.patch,
    binutils-2.20.51.0.2-gas-expr.patch,
    binutils-2.20.51.0.2-ifunc-ld-s.patch,
    binutils-2.20.51.0.2-lwp.patch,
    binutils-2.20.51.0.2-ppc-hidden-plt-relocs.patch,
    binutils-2.20.51.0.2-x86-hash-table.patch,
  - Do not allow unique symbols to be bound locally.  (PR ld/11434)
  - Add support for DWARF4 debug information.


author: Nick Clifton <nickc@redhat.com> - 2.20.51.0.7-4
changelog:
  - Allow GOLD linker to parse "-l<name>" directives inside INPUT statements in linker scripts. (BZ 600553)


author: Nick Clifton <nickc@redhat.com> - 2.20.51.0.7-5
changelog:
  - Rename the binutils-static package to binutils-devel in line with the Fedora packaging guidelines.


author: Nick Clifton <nickc@redhat.com> - 2.21.51.0.5-1
changelog:
  - Rebase on 2.21.51.0.5 tarball.
  - Delete redundant patches.
  - Fix gold+ld configure command line option.


author: Nick Clifton <nickc@redhat.com> - 2.22.52.0.1-1
changelog:
  - Rebase on 2.22.52 release.
  - Remove build-id.patch and gold-casts.patch as they are included in the 2.22.52 sources.


author: Nick Clifton <nickc@redhat.com> - 2.22.52.0.2-1
changelog:
  - Rebase on 2.22.52.0.2 release.  (#816514)
  - Retire binutils-2.22.52.0.1-weakdef.patch, binutils-2.22.52.0.1-ld-13621.patch, binutils-rh797752.patch, binutils-2.22.52.0.1-x86_64-hidden-ifunc.patch, binutils-2.22.52.0.1-tsx.patch and binutils-2.22.52.0.1-hidden-ifunc.patch.
  - Update binutils-2.22.52.0.1-reloc-on-by-default.patch.


author: Nick Clifton <nickc@redhat.com> - 2.23.51.0.1-1
changelog:
  - Rebase on 2.23.51.0.1 release.  (#846433)
  - Retire binutils-2.22.52.0.4-dwz.patch, binutils-2.22.52.0.4-ar-4Gb.patch, binutils-2.22.52.0.4-arm-plt-refcount.patch, binutils-2.22.52.0.4-s390-64bit-archive.patch.


author: Nick Clifton <nickc@redhat.com> - 2.23.51.0.2-1
changelog:
  - Rebase on 2.23.51.0.2 release.  (#856119)
  - Retire binutils-2.23.51.0.1-gold-keep.patch and binutils-rh805974.patch.


author: Nick Clifton <nickc@redhat.com> - 2.23.52.0.1-9
changelog:
  - Enhance opncls.c:find_separate_debug_file() to look in Fedora specific locations.
  - Enhance dwarf2.c:find_line() to work with shared libraries.  (#920542)


author: Nick Clifton <nickc@redhat.com> - 2.23.88.0.1-1
changelog:
  - Switch over to basing sources on the official FSF binutils releases.
  - Retire binutils-2.23.52.0.1-revert-pr15149.patch.
  - Update binutils-2.22.52.0.1-relro-on-by-default.patch and binutils-2.23.52.0.1-as-doc-texinfo-fixes.patch.


author: Nick Clifton <nickc@redhat.com> - 2.23.88.0.1-4
changelog:
  - Import H.J.'s patch to add support for kernel ld -r modules.
  - Fix errors reported by version 5.0 of texinfo when parsing bfd documentation.


author: Nick Clifton <nickc@redhat.com> - 2.23.88.0.1-6
changelog:
  - Fix building of aarch64 targets after applying the patch for kernel ld -r modules.
  - Fix building when "--with debug" is specified.


author: Kyle McMartin <kyle@redhat.com> 2.23.88.0.1-13
changelog:
  - Add the hard-float/soft-float ABI flag as appropriate for
    ET_DYN/ET_EXEC in EABI_VER5.
  - Fix last changelog entry, it was release 12, not 14.


author: Nick Clifton <nickc@redhat.com> - 2.24-1
changelog:
  - Rebase on binutils 2.24 snapshot.
  - Retire: binutils-2.23.52.0.1-64-bit-thin-archives.patch,
  -         binutils-2.23.52.0.1-as-doc-texinfo-fixes.patch,
  -         binutils-2.23.52.0.1-check-regular-ifunc-refs.patch,
  -         binutils-2.23.2-ld-texinfo-fixes.patch,
  -         binutils-2.23.2-bfd-texinfo-fixes.patch,
  -         binutils-2.23.2-dwz-alt-debuginfo.patch
  -         binutils-2.23.2-s390-gas-machinemode.patch
  -         binutils-2.23.2-xtensa.memset.patch
  -         binutils-2.23.2-s390-zEC12.patch
  -         binutils-2.23.2-arm-add-float-abi-to-e_flags.patch
  -         binutils-2.23.51.0.1-readelf-flush-stdout.patch


author: Nick Clifton <nickc@redhat.com> - 2.24-4
changelog:
  - Update binutils 2.24 snapshot.
  - Stop NM from halting if it encounters a file with no symbols when displaying dynamic symbols in multiple files.  (#1022845)


author: Nick Clifton <nickc@redhat.com> - 2.24-5
changelog:
  - Update binutils 2.24 snapshot.
  - Switch to using GIT instead of CVS to access the FSF repository.
  - Retire binutils-2.24-nm-dynsym.patch


author: Kyle McMartin <kyle@redhat.com> - 2.24-16
changelog:
  - Backport a couple LTO testsuite fixes from HEAD.
    Default to -ffat-lto-objects for some ld tests, which was the default in
    gcc 4.8, but changed in 4.9, and resulted in some failures.
  - Add STATIC_TLS flag on ARM when IE relocs are emitted in a shared
    library. Also fix up offsets in the testsuite resulting from the
    addition of the flags.
  - XFail some ld tests on AArch64 to cut some of the spurious testsuite
    failures down.


author: Kyle McMartin <kmcmarti@redhat.com> - 2.24-23
changelog:
  - aarch64: increase common page size to 64KB
  - binutils-HEAD-change-ld-notice-interface.patch: backport fix from HEAD
    that fixes LTO + ifunc when using ld.bfd instead of gold.
  - binutils-2.24-aarch64-fix-gotplt-offset-ifunc.patch
    binutils-2.24-aarch64-fix-static-ifunc.patch, split elfnn-aarch64 patches
    into upstream git commits, to make it easier to figure out what's
    backported already
  - binutils-2.24-aarch64-fix-ie-relax.patch: add fix for gd to ie relaxation
    when target register is >16 (pretty unlikely, but...)


author: Nick Clifton <nickc@redhat.com> - 2.24-24
changelog:
  - Import patch from mainline to fix seg-fault when reading corrupt srec fields.
    Resolves: BZ #1156272


author: Nick Clifton <nickc@redhat.com> - 2.24-25
changelog:
  - Import patch from mainline to fix seg-fault when reading corrupt group headers.
    Resolves: BZ #1157276


author: Nick Clifton <nickc@redhat.com> - 2.24-26
changelog:
  - Import patches for PR/17510 and PR/17512 to fix reading corrupt ELF binaries.
    Resolves: BZ #1157276, #1157277


author: Nick Clifton <nickc@redhat.com> - 2.24-28
changelog:
  - Fix buffer overrun in ihex parser.
  - Fix memory corruption in previous patch.
  - Consoldiate corrupt handling patches into just one patch.
  - Default strings command to using -a.


author: Nick Clifton <nickc@redhat.com> - 2.25-1
changelog:
  - Rebase on FSF binutils 2.25 release.
  - Retire: binutils-2.24-s390-mkopc.patch
  - Retire: binutils-2.24-elfnn-aarch64.patch
  - Retire: binutils-2.24-DW_FORM_ref_addr.patch
  - Retire: binutils-2.24-set-section-macros.patch
  - Retire: binutils-2.24-fake-zlib-sections.patch
  - Retire: binutils-2.24-arm-static-tls.patch
  - Retire: binutils-2.24-fat-lto-objects.patch
  - Retire: binutils-2.24-symbol-warning.patch
  - Retire: binutils-2.24-aarch64-ld-shared-non-PIC-xfail.patch
  - Retire: binutils-2.24-weak-sym-merge.patch
  - Retire: binutils-2.24-indirect-chain.patch
  - Retire: binutils-2.24-aarch64-fix-final_link_relocate.patch
  - Retire: binutils-2.24-aarch64-fix-gotplt-offset-ifunc.patch
  - Retire: binutils-2.24-aarch64-fix-static-ifunc.patch
  - Retire: binutils-2.24-aarch64-fix-ie-relax.patch
  - Retire: binutils-HEAD-change-ld-notice-interface.patch
  - Retire: binutils-2.24-corrupt-binaries.patch
  - Retire: binutils-2.24-strings-default-all.patch
  - Retire: binutils-2.24-corrupt-ar.patch


author: Nick Clifton <nickc@redhat.com> - 2.25-12
changelog:
  - For AArch64 issue an error message when attempting to resolve a
    PC-relative dynamic reloc in a non-PIC object file.
  - Related: 1232499


author: Nick Clifton <nickc@redhat.com> 2.25.1-9
changelog:
  - Prevent an infinite recursion when a plugin tries to claim a file in an unrecognised format.
    (#1174065)


author: Nick Clifton <nickc@redhat.com> 2.26-1
changelog:
  - Rebase on FSF binutils 2.26 release.
  - Retire: binutils-2.25.1-ihex-parsing.patch
  - Retire: binutils-2.25.1-dynamic_list.patch
  - Retire: binutils-2.25.1-aarch64-pr18668.patch
  - Retire: binutils-rh1247126.patch
    (#1271387)


author: Nick Clifton <nickc@redhat.com> 2.26-4
changelog:
  - Drop the kernel patch entirely...
  - Retire: binutils-2.25-kernel-ld-r.patch
  - Retire: binutils-2.25.1-plugin-format-checking.patch


author: Nick Clifton <nickc@redhat.com> 2.26-8
changelog:
  - Fix indentation in bfd/coff-[i386|x86_64].c to avoid compile time warning.
  - Suppress GOLD's dir_caches destructor.
  - Suppress GOLD's Reloc_stub::Key::name function.
  - Suppress unused ARM architecture variations in GAS.


author: Nick Clifton <nickc@redhat.com> 2.26-9
changelog:
  - Fix indentation in bfd/elf64-s390.c, gas/config/tc-ia64.c
    and bfd/pe-mips.c to avoid compile time warnings.


author: Nick Clifton <nickc@redhat.com> 2.26-15
changelog:
  - Import patch to have common symbols in an executable override definitions in shared objects (PR 19579)
    (#1312507)


author: Nick Clifton <nickc@redhat.com> 2.26-20
changelog:
  - Housekeeping: Delete retired patches.  Renumber patches.
  - Increase version number past F24 because F24 update is blocked by a version number comparison.


author: Nick Clifton <nickc@redhat.com> 2.27-1
changelog:
  - Rebase on FSF binutils 2.27 release.
  - Retire: binutils-2.26-formatting.patch
  - Retire: binutils-2.26-Bsymbolic_PIE.patch
  - Retire: binutils-rh1312151.patch
  - Retire: binutils-2.26-fix-GOT-offset-calculation.patch
  - Retire: binutils-2.26-common-definitions.patch
  - Retire: binutils-2.26-x86-PIE-relocations.patch


author: Nick Clifton <nickc@redhat.com> 2.27-3
changelog:
  - Put sections in a monotonically increasing order of file offset.
  - Allow ARM and AArch64 targets to have relro on by default.


author: Nick Clifton <nickc@redhat.com> 2.27-5
changelog:
  - Add support for building the rpm with "--with bootstrap" enabled.
  - Retire: binutils-2.20.51.0.2-ia64-lib64.patch


author: Nick Clifton <nickc@redhat.com> 2.27-6
changelog:
  - Omit building GOLD when bootstrapping.
  - Add a generic build requirement on gcc.
  - Move bison and m4 build requirements to be conditional upon building GOLD.
  - Add --with-sysroot configure option when building native targets.
  - Skip PR14918 linker test for ARM native targets.
    (#1374889)


author: Nick Clifton <nickc@redhat.com> 2.27-7
changelog:
  - Use --with-sysroot=/ for native targets.  This prevents the default
    sysroot of /usr/local/<target>/sys-root from being used, which breaks 
    locating needed shared libaries, but still allows the --sysroot
    linker command line option to be effective.
    (#1374889)
    (#1377803)
    (#1377949)


author: Mark Pryor <pryorm09@gmail.com> 2.27-9
changelog:
  - Fix invocation of /sbin/ldconfig when reinstalling binutils
    in order to prevent warnings from rpm.
    (#1379030)
    (#1379117)


author: Nick Clifton <nickc@redhat.com> 2.28-1
changelog:
  - Rebase on FSF binutils v2.28.
  - Retire: binutils-2.23.52.0.1-addr2line-dynsymtab.patch
  - Retire: binutils-2.27-local-dynsym-count.patch
  - Retire: binutils-2.27-monotonic-section-offsets.patch
  - Retire: binutils-2.27-arm-aarch64-default-relro.patch
  - Retire: binutils-2.28-gold.patch
  - Retire: binutils-2.27-objdump-improvements.patch
  - Retire: binutils-2.27-dwarf-parse-speedup.patch
  - Retire: binutils-2.27-objdump-improvements.2.patch
  - Retire: binutils-2.27-arm-binary-objects.patch
  - Retire: binutils-2.27-ppc-fp-attributes.patch
  - Add patch to sync libiberty with FSF GCC mainline.
    (#1428310)


author: Mark Wielaard <mjw@redhat.com> 2.28-3
changelog:
  - Backport patch to add support for putting name, comp_dir and
    producer strings into the .debug_str section. 
    (#1429389)


author: Nick Clifton <nickc@redhat.com> 2.28-4
changelog:
  - Update GNU BUILD NOTES patch.
  - Import FSF binutils patch to fix an abort with PowerPC dynamic relocs.


author: Nick Clifton <nickc@redhat.com> 2.28-5
changelog:
  - Update GNU BUILD NOTES patch.
  - Import FSF binutils patch to fix running readelf on debug info binaries.
    (#1434050)


author: Nick Clifton <nickc@redhat.com> 2.29-1
changelog:
  - Rebase on FSF binutils 2.29.
  - Retire: binutils-2.20.51.0.10-ppc64-pie.patch
  - Retire: binutils-2.27-ld-buffer-overflow.patch
  - Retire: binutils-2.28-libiberty-bugfixes.patch
  - Retire: binutils-gnu-build-notes.patch
  - Retire: binutils-2.28-gas-comp_dir.patch
  - Retire: binutils-2.28-ppc-dynamic-relocs.patch
  - Retire: binutils-2.28-dynamic-section-warning.patch
  - Retire: binutils-2.28-aarch64-copy-relocs.patch
  - Retire: binutils-2.28-DW_AT_export_symbols.patch


author: Nick Clifton <nickc@redhat.com> 2.29-5
changelog:
  - Update ppc64 localentry0 patch with changes made by Alan Modra to the FSF binutils sources.
    (#1475636)


author: Nick Clifton <nickc@redhat.com> - 2.29-7
changelog:
  - Annotate patches with reason and lifetime expectances.
  - Retire: binutils-2.24-ldforcele.patch
  - Retire: binutils-2.25-set-long-long.patch
  - Retire: binutils-2.25.1-cleansweep.patch
  - Retire: binutils-2.26-fix-compile-warnings.patch
  - Retire: binutils-2.28-ignore-gold-duplicates.patch


author: Nick Clifton <nickc@redhat.com> 2.29-8
changelog:
  - Import fix for PR 21884 which stops a seg-fault in the linker when changing output format to binary during a final link.
    (#1491023)


author: Nick Clifton <nickc@redhat.com> 2.29.1-1
changelog:
  - Rebase on FSF binutils 2.29.1 release.
  - Retire: binutils-2.29-ppc64-plt-localentry0-disable.patch
  - Retire: binutils-2.29-non-elf-orphan-skip.patch


author: Nick Clifton <nickc@redhat.com> 2.29.1-2
changelog:
  - Enable GOLD for PPC64 and s390x. (#1173780)
  - Retire: binutils-2.20.51.0.10-sec-merge-emit.patch.
    (It has been redundant for a long time now...)


author: Nick Clifton <nickc@redhat.com> 2.29.1-3
changelog:
  - Disable PLT elision for x86/x86_64.  (#1452111 and #1333481)
  - Fix the GOLD linkers generation of relocations for start and stop symbols.  (#1500898)


author: Nick Clifton <nickc@redhat.com> 2.29.1-4
changelog:
  - Prevent the PowerPC64 linker from triggering a seg-fault when discarding dynamic sections.  (#1513014)
  - Prevent a seg-fault when attempting to pad a section with a NULL padding pointer.
  - Do not create PLT entries for AARCH64 IFUNC symbols referenced in debug sections.
  - Fix compile time warning messages.


author: Nick Clifton <nickc@redhat.com> 2.29.1-8
changelog:
  - Add standards.info file to documentation distributed with the binutils package.  (#1467390 and #1520899)


author: Nick Clifton <nickc@redhat.com> 2.30-11
changelog:
  - Treat relocs against s390x IFUNC symbols in note sections as relocs against the FUNC symbol instead.  (#1553705)


author: Nick Clifton <nickc@redhat.com> 2.30-12
changelog:
  - Treat relocs against s390x IFUNC symbols in note sections as relocs against the FUNC symbol instead.
  - Combined previous patches into one which covers all ifunc supporting architectures.    (#1553705)
  - Retire binutils-s390-ifunc-relocs-in-notes.patch
  - Retire binutils-x86_64-ifunc-relocs-in-notes.patch


author: Nick Clifton <nickc@redhat.com> 2.30-13
changelog:
  - Do not discard debugobj files created by GCC v8 LTO wrapper.  (#1543912 and RHBZ 84847 and PR 20882)


author: Nick Clifton <nickc@redhat.com> 2.30-14
changelog:
  - Fix the GOLD linker's processing of protected symbols created by the LLVM plugin.  (#1559234 and PR 22868)


author: Nick Clifton <nickc@redhat.com> 2.30-16
changelog:
  - Fix for PR 22887 - crashing objdump by passing it a corrupt AOUT binary.  (#1553115)
  - Fix for PR 22905 - crashing objdump by passing it a corrupt DWARF file.  (#1553122)
  - Fix for PR 22741 - crashing objdump by passing it a corrupt COFF file.  (#1571918)


author: Nick Clifton <nickc@redhat.com> 2.30-18
changelog:
  - Fix a seg-fault parsing corrupt DWARF information.  (#1573360)
  - Fix another seg-fault parsing corrupt DWARF information.  (#1573367)
  - Fix a seg-fault copying a corrupt ELF file.  (#1551788)
  - Fix a seg-fault parsing a large ELF files on a 32-bit host.  (#1539891)
  - Fix a seg-fault running nm on a corrupt ELF file.  (#15343247)
  - Fix a seg-fault running nm on a file containing corrupt DWARF information.  (#1551781)
  - Fix another seg-fault running nm on a file containing corrupt DWARF information.  (#1551763)


author: Nick Clifton <nickc@redhat.com> 2.30-19
changelog:
  - Fix a seg-fault running objcopy on a corrupt PE format file.  (#1574702)
  - Fix a seg-fault running objcopy on a corrupt ELF format file.  (#1574705)


author: Nick Clifton <nickc@redhat.com> 2.30-20
changelog:
  - Have the x86 linker resolve relocations against the _end, _edata and __bss_start symbols locally.  (#1576735)
  - Do not generate GNU build notes for linkonce sections.  (#1576362)


author: Nick Clifton <nickc@redhat.com> 2.30-22
changelog:
  - Fix handling of local versioned symbols by the x86 linker.  (PR 23194)
  - Fix linker testsuite failures.


author: Nick Clifton <nickc@redhat.com> 2.30-24
changelog:
  - When installing both ld.bfd and ld.gold, do not reset the current alternative if upgrading.  (#1592069)


author: Nick Clifton <nickc@redhat.com> 2.30-58
changelog:
  - Stop the BFD library from complaining about sections with multiple sets of relocations.  (#1749084)


author: Nick Clifton <nickc@redhat.com> 2.30-60
changelog:
  - Add support for SVE Vector PCS on AArch64.  (#1726637)
  - Add fixes for coverity test failures.
  - Improve objcopy's ability to merge GNU build attribute notes.


author: Nick Clifton <nickc@redhat.com> 2.30-61
changelog:
  - Enable threading in the GOLD linker.  (#1729225)
  - Add check to readelf in order to prevent an integer overflow.


author: Nick Clifton <nickc@redhat.com> - 2.30-71
changelog:
  - Fix a potential seg-fault in the BFD library when parsing pathalogical debug_info sections.  (#1779245)
  - Fix a potential memory exhaustion in the BFD library when parsing corrupt DWARF debug information.


author: Nick Clifton <nickc@redhat.com> - 2.30-72
changelog:
  - Allow the BFD library to handle the copying of files containing secondary reloc sections.  (#1801879)


author: Nick Clifton <nickc@redhat.com> - 2.30-74
changelog:
  - Stop the BFD library from issueing warning messages about allocated sections being found outside of loadable segments.  (#1630115)
  - Fix linker testsuite failures for the aarch64 and s390x targets.  (#1632775, #1809101)
  - Fix building the binutils with address sanitization enabled.  (#1678323)
  - Add support for the PT_GNU_PROPERTY segment.  (#1721606)
  - Fix an internal error in the GOLD linker.  (#1722715)
  - Fix the generation of corrupt .note.gnu.property notes.  (#1723533)
  - Stop objcopy's --set-section-flags option from setting the 'shared' flag on non-COFF binaries.  (#1807308)
  - Fix a bug in the secondary reloc processing code.  (#1809186)


author: Nick Clifton <nickc@redhat.com> - 2.30-100
changelog:
  - Do not strip the static BFD library.  (For real this time).  (#1924068)
  - Remove support for ARM v8.6 ISA.  (#1875912)


author: Nick Clifton <nickc@redhat.com> - 2.30-101
changelog:
  - Fix excessive memory consumption in the BFD librart when parsing corrupt DWARF information.  (#1947134)


author: Xue haolin <xuehaolin@openanolis.org> - 2.30-125.0.1
changelog:
  - Rebrand to Anolis OS.
  - Add loongarch support. (lixing@loongson.cn)
  - Fixup LoongArch wrong debug line. (lixing@loongson.cn)
  - Add LoongArch missing opcode. (lixing@loongson.cn)
  - Fixup gas SIGSEGV for extremely long function name. (lixing@loongson.cn)
  - change loong64 to loongarch64. (lixing@loongson.cn)
  - Add ifunc support. (lixing@loongson.cn)
  - Delete R_LARCH_NONE for eh_frame. (lixing@loongson.cn)
  - Fixup pr21964 bug. (lixing@loongson.cn)
  - Add 3A6000 opcode. (lixing@loongson.cn)
  - Fix some testsuite error. (lixing@loongson.cn)
  - LoongArch: Always allocate a new pointer for section name. (fanpeng@loongson.cn)
  - LoongArch: binutils Remove ABI_XLP32 related code. (fanpeng@loongson.cn)


author: Iryna Shcherbina <ishcherb@redhat.com> - 1.2.0-2
changelog:
  - Update Python 2 dependency declarations to new packaging standards
    (See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)


author: Tomas Orsava <torsava@redhat.com> - 1.2.0-9
changelog:
  - Switch hardcoded python3 shebangs into the %{__python3} macro
  - Add missing BuildRequires on python3-devel so that %{__python3} macro is
    defined


author: Eric Sandeen <sandeen@redhat.com> - 1.0.1-2
changelog:
  - Upstream respun the release tarball to re-include top-level dir
  - drop exclude of bno_plot.py[co], not getting built now?


author: Gopal Tiwari <gtiwari@redhat.com> - 5.56-1
changelog:
  + bluez-5.56-1
  - Fixing (#1965057)
  - Removing bccmd, enabling hid2hci as upstream removed the support in bluez-5.56


author: - Bastien Nocera <bnocera@redhat.com> - 4.5-1
changelog:
  - Update to 4.5
  - Fix initscript to actually start bluetoothd by hand
  - Add chkconfig information to the initscript


author: - David Woodhouse <David.Woodhouse@intel.com> - 4.5-2
changelog:
  - Change main utils package name to 'bluez'; likewise its subpackages
  - Remove references to obsolete initscripts (hidd,pand,dund)


author: Karsten Hopp <karsten@redhat.com> 4.29-2
changelog:
  - bluez builds fine on s390(x) and the packages are required to build
    other packages, drop ExcludeArch


author: Bastien Nocera <bnocera@redhat.com> 4.47-2
changelog:
  - Remove hid2hci calls, they're in udev now
  - Work-around udev bug, bluetoothd wasn't getting enabled
    on coldplug


author: Bastien Nocera <bnocera@redhat.com> 4.50-2
changelog:
  - Remove obsoleted patches
  - Add another CUPS backend patch
  - Update cable pairing patch for new build system


author: Bastien Nocera <bnocera@redhat.com> 4.57-2
changelog:
  - Move the rfcomm.conf to the compat package, otherwise
    the comments at the top of it are confusing


author: Bastien Nocera <bnocera@redhat.com> 4.61-1
changelog:
  - Update to 4.61
  - Remove Wacom tablet enabler, now in the kernel
  - Fix linking with new DSO rules (#564799)


author: Dan Horák <dan[at]danny.cz> 4.66-3
changelog:
  - don't require the pin helper on s390(x) now, we can disable the whole
    bluetooth stack in the future


author: Orcan Ogetbil <oget[dot]fedora[at]gmail[dot]com> 4.69-3
changelog:
  - Comment out Requires: dbus-bluez-pin-helper for bootstrapping. Otherwise
    it drags in the old blueman, built against python-2.6


author: Lennart Poettering <lpoetter@redhat.com> - 4.94-2
changelog:
  - Enable bluetoothd by default
  - Follow-up on https://bugzilla.redhat.com/show_bug.cgi?id=694519 also fixing upgrades


author: Lennart Poettering <lpoetter@redhat.com> - 4.94-4
changelog:
  - Enable bluetoothd on all upgrades from 4.87-6 and older, in order to fix up broken F15 installations


author: Hans de Goede <hdegoede@redhat.com> 4.96-2
changelog:
  - hid2hci was recently removed from udev and added to bluez in 4.93,
    udev in Fedora-16 no longer has hid2hci -> enable it in our bluez builds.
    This fixes bluetooth not working on machines where the bluetooth hci
    initially shows up as a hid device, such as with many Dell laptops.


author: Hans de Goede <hdegoede@redhat.com> 4.96-3
changelog:
  - Put hid2hci into its own (optional) subpackage, so that people who
    just want to use their HID proxying HCI with the keyboard and mouse
    it came with, will have things working out of the box.
  - Put udev rules in /lib/udev, where package installed udev rules belong


author: Bastien Nocera <bnocera@redhat.com> 4.101-4
changelog:
  - Clean up requires and build requires
  - Use CUPS macro (#772236)
  - Enable audio socket so a2dp works in PulseAudio again (#874015)
  - Fix hid2hci not working with recent kernels (#877998)


author: Don Zickus <dzickus@redhat.com> 5.40-2
changelog:
  - obexd fixes to prevent crashes
  - add /etc/bluetooth/main.conf config file
  - set 'AutoEnable=true' in /etc/bluetooth/main.conf file


author: Peter Robinson <pbrobinson@fedoraproject.org> 5.44-1
changelog:
  - Update to 5.44
  - Enable deprecated option to keep all usual tools
  - Ship btattach tool
  - Minor spec cleanups


author: Bastien Nocera <bnocera@redhat.com> - 5.46-4
changelog:
  + bluez-5.46-4
  - Patches cleanup
  - Add DualShock4 cable pairing support
  - BIND_NOW support for RELRO
  - iCade autopairing support


author: Hans de Goede <hdegoede@redhat.com> - 5.46-5
changelog:
  - Add scripts to automatically btattach serial-port / uart connected
    Broadcom HCIs found on some Atom based x86 hardware


author: Peter Robinson <pbrobinson@fedoraproject.org> 5.47-1
changelog:
  - New upstream 5.47 bugfix release
  - Initial support for Bluetooth LE mesh
  - Blueooth 5 fixes and improvements


author: David Marlin <dmarlin@redhat.com> - 5.63-2
changelog:
  + bluez-5.63-2
  - Change default of ClassicBondedOnly to true to align with HID specification.
  - Resolves: RHEL-18429
  - Fixing CVE-2021-41229


author: Christian Kellner <ckellner@redhat.com> - 0.1-2
changelog:
  - Set database path to /var/lib/boltd, create it during
    installation, which is needed for the service file to work.


author: Christian Kellner <ckellner@redhat.com> - 0.8-1
changelog:
  - bolt 0.8 upstream release with pre-boot ACL and IOMMU support
    D-Bus Configuration moved from sysconfdir to datadir
    Resolves: #1629715


author: Christian Kellner <ckellner@redhat.com> - 0.8-2
changelog:
  - Rebuilt for fixed gating.yaml (remove missing tier1 gate)
  - Unset env NOTIFY_SOCKET for no socket case in test-unix


author: Marian Csontos <mcsontos@redhat.com> 1.3-1
changelog:
  - Check for duplicates consistently in the clone and edit commands.
  - Apply correct command line precedence to --add-opts and --del-opts.
  - Correctly merge multiple --add/del-opts when editing or cloning.
  - Correctly propagate --add/del-opts in boom edit commands.
  - Enhanced logging of --add/del-opts merge logic.
  - The default Python interpreter is now /usr/bin/python.
  - Fixed re-ordering of options modifications when read from disk.
  - Do not set BootParams attributes for anonymous option words.
  - Make lvm_root_lv validation checks more strict.
  - Improve BootParams.from_entry() parameter recovery debug logging.
  - Include sample OsProfile for Fedora 32.
  - Re-set sandbox state in test suite to ensure run-to-run consistency.
  - Improve compatibility with Red Hat BLS implementation.
  - Allow non-boom managed entries to be listed and displayed.
  - Handle quirks in Red Hat's use of the BLS machine_id key.
  - Allow grub2 bootloader variables to be expanded when cloning entries.
  - Simplify clone_entry logic and make consistent with edit_entry.
  - Ensure stable ordering of legacy boot entry configuration.


author: Colin Walters <walters@verbum.org> - 0.1.7-1
changelog:
  - New upstream version;
    https://github.com/projectatomic/bubblewrap/releases/tag/v0.1.7
  - Resolves: #1411814


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - force compilation with egcs to avoid gcc optimization bug (thank God 
    we haven't been beaten by it)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - autoconfed and libtoolized package 
  - fixed Copyright (it's BSD, not GPL)
  - dumped bzless (less works fine with bz2-files)
  - rewrote build and install parts
  - separated main package and devel package


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - FHS packaging to build on solaris2.5.1.
  - remove config.cache from autoconf patch.
  - sparc: use %configure, but not the m4 macros.


author: Trond Eivind Glomsrød <teg@redhat.com> 1.0.1-5
changelog:
  - Don't segfault when infile is a directory and "-f" is used (#56623)
  - Automake is evil. Add workaround


author: Trond Eivind Glomsrød <teg@redhat.com> 1.0.2-1
changelog:
  - 1.0.2
  - Total overhaul of build precedure
  - Add many small helper programs added to 1.0.2
  - drop old patches


author: Jakub Martisko <jamartis@redhat.com> - 1.0.6-28
changelog:
  - The previous fix caused some regressions
  - Use an updated patch that deals with the original issue+the regressions
  Resolves: RHEL-71140


author: Ville Skyttä <ville.skytta at iki.fi> - 1.6.0-3
changelog:
  - Patch to make upstream build system honor our CFLAGS and friends.
  - Don't bother building throwaway static libs.
  - Disable autotools dependency tracking for cleaner build logs and possible
    slight build speedup.
  - Convert docs to UTF-8.
  - Update URLs.


author: Jakub Hrozek <jhrozek@redhat.com> - 1.7.3-1
changelog:
  - Upgrade to new upstream release 1.7.3 (obsoletes search/domain patch)
  - Fix conflict of -devel packages on multilib architectures (#602880)


author: Jakub Hrozek <jhrozek@redhat.com> - 1.7.5-1
changelog:
  - New upstream release 1.7.5
  - Obsoletes patch #2
  - Rebase patch #1 (optflags) to match the 1.7.5 code
  - Fixed Source0 URL to point at the upstream tarball


author: Jakub Hrozek <jhrozek@redhat.com> - 1.9.1-5
changelog:
  - Apply a patch by Stephen Gallagher to patch autoconf, not configure to
    allow optflags to be passed in by build environment
  - Run autoreconf before configure
  - git rm obsolete patches
  - Apply upstream patch to stop overriding AC_CONFIG_MACRO_DIR


author: Jakub Hrozek <jhrozek@redhat.com> - 1.10.1-1
changelog:
  - New upstream release 1.10
  - Obsolete upstreamed patches
  - Amend the multilib patch, there's no need to patch configure since we
    are running autoreconf anyways
  - https://raw.github.com/bagder/c-ares/cares-1_10_0/RELEASE-NOTES


author: Alexey Tikhonov <atikhono@redhat.com> - 1.13.0-6
changelog:
  - Resolves: rhbz#1989425 - CVE-2021-3672 c-ares: missing input validation of host names may lead to Domain Hijacking [rhel-8]


author: Alexey Tikhonov <atikhono@redhat.com> - 1.13.0-7
changelog:
  - Resolves: rhbz#2170867 - c-ares: buffer overflow in config_sortlist() due to missing string length check [rhel-8]


author: Alexey Tikhonov <atikhono@redhat.com> - 1.13.0-9
changelog:
  - Resolves: rhbz#2238293 - CVE-2020-22217 c-ares: read-heap-buffer-overflow in ares_parse_soa_reply [rhel-8] [rhel-8.9.0.z]


author: Bob Relyea <rrelyea@redhat.com> - 2020.2.41-81
changelog:
  - Update to CKBI 2.41 from NSS 3.53.0
  -    Removing:
  -     # Certificate "AddTrust Low-Value Services Root"
  -     # Certificate "AddTrust External Root"
  -     # Certificate "UTN USERFirst Email Root CA"
  -     # Certificate "Certplus Class 2 Primary CA"
  -     # Certificate "Deutsche Telekom Root CA 2"
  -     # Certificate "Staat der Nederlanden Root CA - G2"
  -     # Certificate "Swisscom Root CA 2"
  -     # Certificate "Certinomis - Root CA"
  -    Adding:
  -     # Certificate "Entrust Root Certification Authority - G4"


author: Bob Relyea <rrelyea@redhat.com> - 2021.2.48-81
changelog:
  - Update to CKBI 2.48 from NSS 3.64
  -    Removing:
  -     # Certificate "Verisign Class 3 Public Primary Certification Authority - G3"
  -     # Certificate "GeoTrust Global CA"
  -     # Certificate "GeoTrust Universal CA"
  -     # Certificate "GeoTrust Universal CA 2"
  -     # Certificate "Taiwan GRCA"
  -     # Certificate "GeoTrust Primary Certification Authority"
  -     # Certificate "thawte Primary Root CA"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G5"
  -     # Certificate "GeoTrust Primary Certification Authority - G3"
  -     # Certificate "thawte Primary Root CA - G2"
  -     # Certificate "thawte Primary Root CA - G3"
  -     # Certificate "GeoTrust Primary Certification Authority - G2"
  -     # Certificate "VeriSign Universal Root Certification Authority"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G4"
  -     # Certificate "EE Certification Centre Root CA"
  -     # Certificate "LuxTrust Global Root 2"
  -     # Certificate "Symantec Class 1 Public Primary Certification Authority - G4"
  -     # Certificate "Symantec Class 2 Public Primary Certification Authority - G4"
  -    Adding:
  -     # Certificate "Microsoft ECC Root Certificate Authority 2017"
  -     # Certificate "Microsoft RSA Root Certificate Authority 2017"
  -     # Certificate "e-Szigno Root CA 2017"
  -     # Certificate "certSIGN Root CA G2"
  -     # Certificate "Trustwave Global Certification Authority"
  -     # Certificate "Trustwave Global ECC P256 Certification Authority"
  -     # Certificate "Trustwave Global ECC P384 Certification Authority"
  -     # Certificate "NAVER Global Root Certification Authority"
  -     # Certificate "AC RAIZ FNMT-RCM SERVIDORES SEGUROS"
  -     # Certificate "GlobalSign Secure Mail Root R45"
  -     # Certificate "GlobalSign Secure Mail Root E45"
  -     # Certificate "GlobalSign Root R46"
  -     # Certificate "GlobalSign Root E46"


author: Bob Relyea <rrelyea@redhat.com> - 2021.2.48-82
changelog:
  - Update to CKBI 2.48 from NSS 3.66
  -    Removing:
  -     # Certificate "QuoVadis Root CA"
  -     # Certificate "Sonera Class 2 Root CA"
  -     # Certificate "Trustis FPS Root CA"
  -    Adding:
  -     # Certificate "GLOBALTRUST 2020"
  -     # Certificate "ANF Secure Server Root CA"
  -     # Certificate "Certum EC-384 CA"
  -     # Certificate "Certum Trusted Root CA"


author: Bob Relyea <rrelyea@redhat.com> - 2022.2.54-81
changelog:
  - Update to CKBI 2.54 from NSS 3.79
  -    Removing:
  -     # Certificate "GlobalSign Root CA - R2"
  -     # Certificate "DST Root CA X3"
  -     # Certificate "Cybertrust Global Root"
  -     # Certificate "Explicitly Distrusted DigiNotar PKIoverheid G2"
  -    Adding:
  -     # Certificate "TunTrust Root CA"
  -     # Certificate "HARICA TLS RSA Root CA 2021"
  -     # Certificate "HARICA TLS ECC Root CA 2021"
  -     # Certificate "HARICA Client RSA Root CA 2021"
  -     # Certificate "HARICA Client ECC Root CA 2021"
  -     # Certificate "Autoridad de Certificacion Firmaprofesional CIF A62634068"
  -     # Certificate "vTrus ECC Root CA"
  -     # Certificate "vTrus Root CA"
  -     # Certificate "ISRG Root X2"
  -     # Certificate "HiPKI Root CA - G1"
  -     # Certificate "Telia Root CA v2"
  -     # Certificate "D-TRUST BR Root CA 1 2020"
  -     # Certificate "D-TRUST EV Root CA 1 2020"


author: Bob Relyea <rrelyea@redhat.com> - 2022.2.54-80.0
changelog:
  - Update to CKBI 2.54 from NSS 3.79
  -    Adding:
  -     # Certificate "CAEDICOM Root"
  -     # Certificate "I.CA Root CA/RSA"
  -     # Certificate "MULTICERT Root Certification Authority 01"
  -     # Certificate "Certification Authority of WoSign G2"
  -     # Certificate "CA WoSign ECC Root"
  -     # Certificate "CCA India 2015 SPL"
  -     # Certificate "Swedish Government Root Authority v3"
  -     # Certificate "Swedish Government Root Authority v2"
  -     # Certificate "Tunisian Root Certificate Authority - TunRootCA2"
  -     # Certificate "OpenTrust Root CA G1"
  -     # Certificate "OpenTrust Root CA G2"
  -     # Certificate "OpenTrust Root CA G3"
  -     # Certificate "Certplus Root CA G1"
  -     # Certificate "Certplus Root CA G2"
  -     # Certificate "Government Root Certification Authority"
  -     # Certificate "A-Trust-Qual-02"
  -     # Certificate "Thailand National Root Certification Authority - G1"
  -     # Certificate "TrustCor ECA-1"
  -     # Certificate "TrustCor RootCert CA-2"
  -     # Certificate "TrustCor RootCert CA-1"
  -     # Certificate "Certification Authority of WoSign"
  -     # Certificate "CA 沃通根证书"
  -     # Certificate "SSC GDL CA Root B"
  -     # Certificate "SAPO Class 2 Root CA"
  -     # Certificate "SAPO Class 3 Root CA"
  -     # Certificate "SAPO Class 4 Root CA"
  -     # Certificate "CA Disig Root R1"
  -     # Certificate "Autoridad Certificadora Raíz Nacional de Uruguay"
  -     # Certificate "ApplicationCA2 Root"
  -     # Certificate "GlobalSign"
  -     # Certificate "Symantec Class 3 Public Primary Certification Authority - G6"
  -     # Certificate "Symantec Class 3 Public Primary Certification Authority - G4"
  -     # Certificate "Halcom Root CA"
  -     # Certificate "Swisscom Root EV CA 2"
  -     # Certificate "CFCA GT CA"
  -     # Certificate "Digidentity L3 Root CA - G2"
  -     # Certificate "SITHS Root CA v1"
  -     # Certificate "Macao Post eSignTrust Root Certification Authority (G02)"
  -     # Certificate "Autoridade Certificadora Raiz Brasileira v2"
  -     # Certificate "Swisscom Root CA 2"
  -     # Certificate "IGC/A AC racine Etat francais"
  -     # Certificate "PersonalID Trustworthy RootCA 2011"
  -     # Certificate "Swedish Government Root Authority v1"
  -     # Certificate "Swiss Government Root CA II"
  -     # Certificate "Swiss Government Root CA I"
  -     # Certificate "Network Solutions Certificate Authority"
  -     # Certificate "COMODO Certification Authority"
  -     # Certificate "LuxTrust Global Root"
  -     # Certificate "AC1 RAIZ MTIN"
  -     # Certificate "Microsoft Root Certificate Authority 2011"
  -     # Certificate "CCA India 2011"
  -     # Certificate "ANCERT Certificados Notariales V2"
  -     # Certificate "ANCERT Certificados CGN V2"
  -     # Certificate "EE Certification Centre Root CA"
  -     # Certificate "DigiNotar Root CA G2"
  -     # Certificate "Federal Common Policy CA"
  -     # Certificate "Autoridad de Certificacion Raiz del Estado Venezolano"
  -     # Certificate "Autoridad de Certificacion Raiz del Estado Venezolano"
  -     # Certificate "China Internet Network Information Center EV Certificates Root"
  -     # Certificate "Verizon Global Root CA"
  -     # Certificate "SwissSign Silver Root CA - G3"
  -     # Certificate "SwissSign Platinum Root CA - G3"
  -     # Certificate "SwissSign Gold Root CA - G3"
  -     # Certificate "Microsec e-Szigno Root CA 2009"
  -     # Certificate "SITHS CA v3"
  -     # Certificate "Certinomis - Autorité Racine"
  -     # Certificate "ANF Server CA"
  -     # Certificate "Thawte Premium Server CA"
  -     # Certificate "Thawte Server CA"
  -     # Certificate "TC TrustCenter Universal CA III"
  -     # Certificate "KEYNECTIS ROOT CA"
  -     # Certificate "I.CA - Standard Certification Authority, 09/2009"
  -     # Certificate "I.CA - Qualified Certification Authority, 09/2009"
  -     # Certificate "VI Registru Centras RCSC (RootCA)"
  -     # Certificate "CCA India 2007"
  -     # Certificate "Autoridade Certificadora Raiz Brasileira v1"
  -     # Certificate "ipsCA Global CA Root"
  -     # Certificate "ipsCA Main CA Root"
  -     # Certificate "Actalis Authentication CA G1"
  -     # Certificate "A-Trust-Qual-03"
  -     # Certificate "AddTrust External CA Root"
  -     # Certificate "ECRaizEstado"
  -     # Certificate "Configuration"
  -     # Certificate "FNMT-RCM"
  -     # Certificate "StartCom Certification Authority"
  -     # Certificate "TWCA Root Certification Authority"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G4"
  -     # Certificate "thawte Primary Root CA - G2"
  -     # Certificate "GeoTrust Primary Certification Authority - G2"
  -     # Certificate "VeriSign Universal Root Certification Authority"
  -     # Certificate "thawte Primary Root CA - G3"
  -     # Certificate "GeoTrust Primary Certification Authority - G3"
  -     # Certificate "E-ME SSI (RCA)"
  -     # Certificate "ACEDICOM Root"
  -     # Certificate "Autoridad Certificadora Raiz de la Secretaria de Economia"
  -     # Certificate "Correo Uruguayo - Root CA"
  -     # Certificate "CNNIC ROOT"
  -     # Certificate "Common Policy"
  -     # Certificate "Macao Post eSignTrust Root Certification Authority"
  -     # Certificate "Staat der Nederlanden Root CA - G2"
  -     # Certificate "NetLock Platina (Class Platinum) Főtanúsítvány"
  -     # Certificate "AC Raíz Certicámara S.A."
  -     # Certificate "Cisco Root CA 2048"
  -     # Certificate "CA Disig"
  -     # Certificate "InfoNotary CSP Root"
  -     # Certificate "UCA Global Root"
  -     # Certificate "UCA Root"
  -     # Certificate "DigiNotar Root CA"
  -     # Certificate "Starfield Services Root Certificate Authority"
  -     # Certificate "I.CA - Qualified root certificate"
  -     # Certificate "I.CA - Standard root certificate"
  -     # Certificate "e-Guven Kok Elektronik Sertifika Hizmet Saglayicisi"
  -     # Certificate "Japanese Government"
  -     # Certificate "AdminCA-CD-T01"
  -     # Certificate "Admin-Root-CA"
  -     # Certificate "Izenpe.com"
  -     # Certificate "TÜBİTAK UEKAE Kök Sertifika Hizmet Sağlayıcısı - Sürüm 3"
  -     # Certificate "Halcom CA FO"
  -     # Certificate "Halcom CA PO 2"
  -     # Certificate "Root CA"
  -     # Certificate "GPKIRootCA"
  -     # Certificate "ACNLB"
  -     # Certificate "state-institutions"
  -     # Certificate "state-institutions"
  -     # Certificate "SECOM Trust Systems CO.,LTD."
  -     # Certificate "D-TRUST Qualified Root CA 1 2007:PN"
  -     # Certificate "D-TRUST Root Class 2 CA 2007"
  -     # Certificate "D-TRUST Root Class 3 CA 2007"
  -     # Certificate "SSC Root CA A"
  -     # Certificate "SSC Root CA B"
  -     # Certificate "SSC Root CA C"
  -     # Certificate "Autoridad de Certificacion de la Abogacia"
  -     # Certificate "Root CA Generalitat Valenciana"
  -     # Certificate "VAS Latvijas Pasts SSI(RCA)"
  -     # Certificate "ANCERT Certificados CGN"
  -     # Certificate "ANCERT Certificados Notariales"
  -     # Certificate "ANCERT Corporaciones de Derecho Publico"
  -     # Certificate "GLOBALTRUST"
  -     # Certificate "Certipost E-Trust TOP Root CA"
  -     # Certificate "Certipost E-Trust Primary Qualified CA"
  -     # Certificate "Certipost E-Trust Primary Normalised CA"
  -     # Certificate "Cybertrust Global Root"
  -     # Certificate "GlobalSign"
  -     # Certificate "IGC/A"
  -     # Certificate "S-TRUST Authentication and Encryption Root CA 2005:PN"
  -     # Certificate "TC TrustCenter Universal CA I"
  -     # Certificate "TC TrustCenter Universal CA II"
  -     # Certificate "TC TrustCenter Class 2 CA II"
  -     # Certificate "TC TrustCenter Class 4 CA II"
  -     # Certificate "Swisscom Root CA 1"
  -     # Certificate "Microsec e-Szigno Root CA"
  -     # Certificate "LGPKI"
  -     # Certificate "AC RAIZ DNIE"
  -     # Certificate "Common Policy"
  -     # Certificate "TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı"
  -     # Certificate "A-Trust-nQual-03"
  -     # Certificate "A-Trust-nQual-03"
  -     # Certificate "CertRSA01"
  -     # Certificate "KISA RootCA 1"
  -     # Certificate "KISA RootCA 3"
  -     # Certificate "NetLock Minositett Kozjegyzoi (Class QA) Tanusitvanykiado"
  -     # Certificate "A-CERT ADVANCED"
  -     # Certificate "A-Trust-Qual-01"
  -     # Certificate "A-Trust-nQual-01"
  -     # Certificate "A-Trust-Qual-02"
  -     # Certificate "Staat der Nederlanden Root CA"
  -     # Certificate "Serasa Certificate Authority II"
  -     # Certificate "TDC Internet"
  -     # Certificate "America Online Root Certification Authority 2"
  -     # Certificate "Autoridad de Certificacion Firmaprofesional CIF A62634068"
  -     # Certificate "Government Root Certification Authority"
  -     # Certificate "RSA Security Inc"
  -     # Certificate "Public Notary Root"
  -     # Certificate "GeoTrust Global CA"
  -     # Certificate "GeoTrust Global CA 2"
  -     # Certificate "GeoTrust Universal CA"
  -     # Certificate "GeoTrust Universal CA 2"
  -     # Certificate "QuoVadis Root Certification Authority"
  -     # Certificate "Autoridade Certificadora Raiz Brasileira"
  -     # Certificate "Post.Trust Root CA"
  -     # Certificate "Microsoft Root Authority"
  -     # Certificate "Microsoft Root Certificate Authority"
  -     # Certificate "Microsoft Root Certificate Authority 2010"
  -     # Certificate "Entrust.net Secure Server Certification Authority"
  -     # Certificate "UTN-USERFirst-Object"
  -     # Certificate "BYTE Root Certification Authority 001"
  -     # Certificate "CISRCA1"
  -     # Certificate "ePKI Root Certification Authority - G2"
  -     # Certificate "ePKI EV SSL Certification Authority - G1"
  -     # Certificate "AC Raíz Certicámara S.A."
  -     # Certificate "SSL.com EV Root Certification Authority RSA"
  -     # Certificate "LuxTrust Global Root 2"
  -     # Certificate "ACA ROOT"
  -     # Certificate "Security Communication ECC RootCA1"
  -     # Certificate "Security Communication RootCA3"
  -     # Certificate "CHAMBERS OF COMMERCE ROOT - 2016"
  -     # Certificate "Network Solutions RSA Certificate Authority"
  -     # Certificate "Network Solutions ECC Certificate Authority"
  -     # Certificate "Australian Defence Public Root CA"
  -     # Certificate "SI-TRUST Root"
  -     # Certificate "Halcom Root Certificate Authority"
  -     # Certificate "Application CA G3 Root"
  -     # Certificate "GLOBALTRUST 2015"
  -     # Certificate "Microsoft ECC Product Root Certificate Authority 2018"
  -     # Certificate "emSign Root CA - G2"
  -     # Certificate "emSign Root CA - C2"
  -     # Certificate "Microsoft ECC TS Root Certificate Authority 2018"
  -     # Certificate "DigiCert CS ECC P384 Root G5"
  -     # Certificate "DigiCert CS RSA4096 Root G5"
  -     # Certificate "DigiCert RSA4096 Root G5"
  -     # Certificate "DigiCert ECC P384 Root G5"
  -     # Certificate "HARICA Code Signing RSA Root CA 2021"
  -     # Certificate "HARICA Code Signing ECC Root CA 2021"
  -     # Certificate "Microsoft Identity Verification Root Certificate Authority 2020"


author: Bob Relyea <rrelyea@redhat.com> - 2022.2.54-80.2
changelog:
  - Update to CKBI 2.54 from NSS 3.79
  -    Removing:
  -     # Certificate "TrustCor ECA-1"
  -     # Certificate "TrustCor RootCert CA-2"
  -     # Certificate "TrustCor RootCert CA-1"
  -     # Certificate "Network Solutions Certificate Authority"
  -     # Certificate "COMODO Certification Authority"
  -     # Certificate "Autoridad de Certificacion Raiz del Estado Venezolano"
  -     # Certificate "Microsec e-Szigno Root CA 2009"
  -     # Certificate "TWCA Root Certification Authority"
  -     # Certificate "Izenpe.com"
  -     # Certificate "state-institutions"
  -     # Certificate "GlobalSign"
  -     # Certificate "Common Policy"
  -     # Certificate "A-Trust-nQual-03"
  -     # Certificate "A-Trust-Qual-02"
  -     # Certificate "Autoridad de Certificacion Firmaprofesional CIF A62634068"
  -     # Certificate "Government Root Certification Authority"
  -     # Certificate "AC Raíz Certicámara S.A."


author: Robert Relyea <rrelyea@redhat.com> - 2023.2.60_v7.0.306-80.0
changelog:
  - Update to CKBI 2.60_v7.0.306 from NSS 3.91
  -    Removing:
  -     # Certificate "Camerfirma Global Chambersign Root"
  -     # Certificate "Staat der Nederlanden EV Root CA"
  -     # Certificate "OpenTrust Root CA G1"
  -     # Certificate "Swedish Government Root Authority v1"
  -     # Certificate "DigiNotar Root CA G2"
  -     # Certificate "Federal Common Policy CA"
  -     # Certificate "TC TrustCenter Universal CA III"
  -     # Certificate "CCA India 2007"
  -     # Certificate "ipsCA Global CA Root"
  -     # Certificate "ipsCA Main CA Root"
  -     # Certificate "Macao Post eSignTrust Root Certification Authority"
  -     # Certificate "InfoNotary CSP Root"
  -     # Certificate "DigiNotar Root CA"
  -     # Certificate "Root CA"
  -     # Certificate "GPKIRootCA"
  -     # Certificate "D-TRUST Qualified Root CA 1 2007:PN"
  -     # Certificate "TC TrustCenter Universal CA I"
  -     # Certificate "TC TrustCenter Universal CA II"
  -     # Certificate "TC TrustCenter Class 2 CA II"
  -     # Certificate "TC TrustCenter Class 4 CA II"
  -     # Certificate "TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı"
  -     # Certificate "CertRSA01"
  -     # Certificate "KISA RootCA 3"
  -     # Certificate "A-CERT ADVANCED"
  -     # Certificate "A-Trust-Qual-01"
  -     # Certificate "A-Trust-nQual-01"
  -     # Certificate "Serasa Certificate Authority II"
  -     # Certificate "TDC Internet"
  -     # Certificate "America Online Root Certification Authority 2"
  -     # Certificate "RSA Security Inc"
  -     # Certificate "Public Notary Root"
  -     # Certificate "Autoridade Certificadora Raiz Brasileira"
  -     # Certificate "Post.Trust Root CA"
  -     # Certificate "Entrust.net Secure Server Certification Authority"
  -     # Certificate "ePKI EV SSL Certification Authority - G1"
  -    Adding:
  -     # Certificate "DigiCert TLS ECC P384 Root G5"
  -     # Certificate "DigiCert TLS RSA4096 Root G5"
  -     # Certificate "DigiCert SMIME ECC P384 Root G5"
  -     # Certificate "DigiCert SMIME RSA4096 Root G5"
  -     # Certificate "Certainly Root R1"
  -     # Certificate "Certainly Root E1"
  -     # Certificate "E-Tugra Global Root CA RSA v3"
  -     # Certificate "E-Tugra Global Root CA ECC v3"
  -     # Certificate "DIGITALSIGN GLOBAL ROOT RSA CA"
  -     # Certificate "DIGITALSIGN GLOBAL ROOT ECDSA CA"
  -     # Certificate "BJCA Global Root CA1"
  -     # Certificate "BJCA Global Root CA2"
  -     # Certificate "Symantec Enterprise Mobile Root for Microsoft"
  -     # Certificate "A-Trust-Root-05"
  -     # Certificate "ADOCA02"
  -     # Certificate "StartCom Certification Authority G2"
  -     # Certificate "ATHEX Root CA"
  -     # Certificate "EBG Elektronik Sertifika Hizmet Sağlayıcısı"
  -     # Certificate "GeoTrust Primary Certification Authority"
  -     # Certificate "thawte Primary Root CA"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G5"
  -     # Certificate "America Online Root Certification Authority 1"
  -     # Certificate "Juur-SK"
  -     # Certificate "ComSign CA"
  -     # Certificate "ComSign Secured CA"
  -     # Certificate "ComSign Advanced Security CA"
  -     # Certificate "Global Chambersign Root"
  -     # Certificate "Sonera Class2 CA"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G3"
  -     # Certificate "VeriSign, Inc."
  -     # Certificate "GTE CyberTrust Global Root"
  -     # Certificate "Equifax Secure Global eBusiness CA-1"
  -     # Certificate "Equifax"
  -     # Certificate "Class 1 Primary CA"
  -     # Certificate "Swiss Government Root CA III"
  -     # Certificate "Application CA G4 Root"
  -     # Certificate "SSC GDL CA Root A"
  -     # Certificate "GlobalSign Code Signing Root E45"
  -     # Certificate "GlobalSign Code Signing Root R45"
  -     # Certificate "Entrust Code Signing Root Certification Authority - CSBR1"


author: Joe Orton <jorton@redhat.com> 2008-2
changelog:
  - add (but don't use) mkcabundle.pl
  - tweak description
  - use /usr/bin/keytool directly; BR java-openjdk


author: Joe Orton <jorton@redhat.com> - 2010-2
changelog:
  - fix Java cacert database generation: use Subject rather than Issuer
    for alias name; add diagnostics; fix some alias names.


author: Joe Orton <jorton@redhat.com> - 2010-3
changelog:
  - update to certdata.txt r1.58
  - add /etc/pki/tls/certs/ca-bundle.trust.crt using 'TRUSTED CERTICATE' format
  - exclude ECC certs from the Java cacerts database
  - catch keytool failures
  - fail parsing certdata.txt on finding untrusted but not blacklisted cert


author: Paul Wouters <pwouters@redhat.com> - 2012.86-2
changelog:
  - Updated blacklist with 20 entries (Diginotar, Trustwave, Comodo(?)
  - Fix to certdata2pem.py to also check for CKT_NSS_NOT_TRUSTED


author: Kai Engert <kaie@redhat.com> - 2012.87-2.fc19.1
changelog:
  - Ship trust bundle file in /usr/share/pki/ca-trust-source/, temporarily in addition.
    This location will soon become the only place containing this file.


author: Kai Engert <kaie@redhat.com> - 2012.87-9
changelog:
  - Major rework for the Fedora SharedSystemCertificates feature.
  - Only ship a PEM bundle file using the BEGIN TRUSTED CERTIFICATE file format.
  - Require the p11-kit package that contains tools to automatically create
    other file format bundles.
  - Convert old file locations to symbolic links that point to dynamically
    generated files.
  - Old files, which might have been locally modified, will be saved in backup 
    files with .rpmsave extension.
  - Added a update-ca-certificates script which can be used to regenerate
    the merged trusted output.
  - Refer to the various README files that have been added for more detailed
    explanation of the new system.
  - No longer require rsc for building.
  - Add explanation for the future version numbering scheme,
    because the old numbering scheme was based on upstream using cvs,
    which is no longer true, and therefore can no longer be used.
  - Includes changes from rhbz#873369.


author: Kai Engert <kaie@redhat.com> - 2012.87-11
changelog:
  - adjust to changed and new functionality provided by p11-kit 0.17.3
  - updated READMEs to describe the new directory-specific treatment of files
  - ship a new file that contains certificates with neutral trust
  - ship a new file that contains distrust objects, and also staple a 
    basic constraint extension to one legacy root contained in the
    Mozilla CA list
  - adjust the build script to dynamically produce most of above files
  - add and own the anchors and blacklist subdirectories
  - file generate-cacerts.pl is no longer required


author: Kai Engert <kaie@redhat.com> - 2012.87-12
changelog:
  - Use both label and serial to identify cert during conversion, rhbz#927601
  - Add myself as contributor to certdata2.pem.py and remove use of rcs/ident.
    (thanks to Michael Shuler for suggesting to do so)
  - Update source URLs and comments, add source file for version information.


author: Kai Engert <kaie@redhat.com> - 2013.1.94-14
changelog:
  - added a manual page and related build requirements
  - simplify the README files now that we have a manual page
  - set a certificate alias in trusted bundle (thanks to Ludwig Nussel)


author: Kai Engert <kaie@redhat.com> - 2013.1.94-18
changelog:
  - Update the Entrust root stapled extension for compatibility with 
    p11-kit version 0.19.2, patch by Stef Walter, rhbz#988745


author: Kai Engert <kaie@redhat.com> - 2014.2.1-3
changelog:
  - Temporarily re-enable several legacy root CA certificates because of
    compatibility issues with software based on OpenSSL/GnuTLS,
    see rhbz#1144808


author: Kai Engert <kaie@redhat.com> - 2014.2.1-4
changelog:
  - Introduce the ca-legacy utility and a ca-legacy.conf configuration file.
    By default, legacy roots required for OpenSSL/GnuTLS compatibility
    are kept enabled. Using the ca-legacy utility, the legacy roots can be
    disabled. If disabled, the system will use the trust set as provided
    by the upstream Mozilla CA list. (See also: rhbz#1158197)


author: Kai Engert <kaie@redhat.com> - 2015.2.3-2
changelog:
  - Update to CKBI 2.3 from NSS 3.18 with legacy modifications
  - Fixed a mistake in the legacy handling of the upstream 2.2 release:
    Removed two AOL certificates from the legacy group, because
    upstream didn't remove them as part of phasing out 1024-bit
    certificates, which means it isn't necessary to keep them.
  - Fixed a mistake in the legacy handling of the upstream 2.1 release:
    Moved two NetLock certificates into the legacy group.


author: Kai Engert <kaie@redhat.com> - 2015.2.3-3
changelog:
  - Don't use "enable" as a value for the legacy configuration, instead
    of the value "default", to make it clear that this preference isn't
    a promise to keep certificates enabled, but rather that we only
    keep them enabled as long as it's considered necessary.
  - Changed the configuration file, the ca-legacy utility and filenames
    to use the term "default" (instead of the term "enable").
  - Added a manual page for the ca-legacy utility.
  - Fixed the ca-legacy utility to handle absence of the configuration
    setting and treat absence as the default setting.


author: Kai Engert <kaie@redhat.com> - 2016.2.9-3
changelog:
  - Revert to the unmodified upstream CA list, changing the legacy trust
    to an empty list. Keeping the ca-legacy tool and existing config,
    however, the configuration has no effect after this change.


author: Kai Engert <kaie@redhat.com> - 2017.2.11-4
changelog:
  - Changed the packaged bundle to use the flexible p11-kit-object-v1 file format,
    as a preparation to fix bugs in the interaction between p11-kit-trust and
    Mozilla applications, such as Firefox, Thunderbird etc.
  - Changed update-ca-trust to add comments to extracted PEM format files.
  - Added an utility to help with comparing output of the trust dump command.


author: Kai Engert <kaie@redhat.com> - 2017.2.11-5
changelog:
  - For CAs trusted by Mozilla, set attribute nss-mozilla-ca-policy: true
  - Set attribute modifiable: false
  - Require p11-kit 0.23.4


author: Kai Engert <kaie@redhat.com> - 2017.2.16-2
changelog:
  - Update to (yet unreleased) CKBI 2.16 which is planned for NSS 3.32.
    Mozilla removed all trust bits for code signing.


author: Kai Engert <kaie@redhat.com> - 2017.2.16-4
changelog:
  - Set P11_KIT_NO_USER_CONFIG=1 to prevent p11-kit from reading user
    configuration files (rhbz#1478172).


author: Kai Engert <kaie@redhat.com> - 2017.2.20-6
changelog:
  - Depend on bash, grep, sed. Required for ca-legacy script execution.
  - p11-kit is already required at %post execution time. (rhbz#1537127)


author: Bob Relyea <rrelyea@redhat.com> - 2019.2.32-1
changelog:
  - Update to CKBI 2.32 from NSS 3.44
  -  Removing:
  -   # Certificate "Visa eCommerce Root"
  -   # Certificate "AC Raiz Certicamara S.A."
  -   # Certificate "ComSign CA"
  -   # Certificate "Certplus Root CA G1"
  -   # Certificate "Certplus Root CA G2"
  -   # Certificate "OpenTrust Root CA G1"
  -   # Certificate "OpenTrust Root CA G2"
  -   # Certificate "OpenTrust Root CA G3"
  -  Adding:
  -   # Certificate "GlobalSign Root CA - R6"
  -   # Certificate "OISTE WISeKey Global Root GC CA"
  -   # Certificate "GTS Root R1"
  -   # Certificate "GTS Root R2"
  -   # Certificate "GTS Root R3"
  -   # Certificate "GTS Root R4"
  -   # Certificate "UCA Global G2 Root"
  -   # Certificate "UCA Extended Validation Root"
  -   # Certificate "Certigna Root CA"
  -   # Certificate "emSign Root CA - G1"
  -   # Certificate "emSign ECC Root CA - G3"
  -   # Certificate "emSign Root CA - C1"
  -   # Certificate "emSign ECC Root CA - C3"
  -   # Certificate "Hongkong Post Root CA 3"


author: Frantisek Krenzelok <fkrenzel@redhat.com> - 2024.2.69_v8.0.303-80.0
changelog:
  - Update to CKBI 2.69_v8.0.303 from NSS 3.101.1
  -    Removing:
  -     # Certificate "Verisign Class 1 Public Primary Certification Authority - G3"
  -     # Certificate "Verisign Class 2 Public Primary Certification Authority - G3"
  -     # Certificate "Security Communication Root CA"
  -     # Certificate "Camerfirma Chambers of Commerce Root"
  -     # Certificate "Hongkong Post Root CA 1"
  -     # Certificate "Autoridad de Certificacion Firmaprofesional CIF A62634068"
  -     # Certificate "Symantec Class 1 Public Primary Certification Authority - G6"
  -     # Certificate "Symantec Class 2 Public Primary Certification Authority - G6"
  -     # Certificate "TrustCor RootCert CA-1"
  -     # Certificate "TrustCor RootCert CA-2"
  -     # Certificate "TrustCor ECA-1"
  -     # Certificate "FNMT-RCM"
  -    Adding:
  -     # Certificate "LAWtrust Root CA2 (4096)"
  -     # Certificate "Sectigo Public Email Protection Root E46"
  -     # Certificate "Sectigo Public Email Protection Root R46"
  -     # Certificate "Sectigo Public Server Authentication Root E46"
  -     # Certificate "Sectigo Public Server Authentication Root R46"
  -     # Certificate "SSL.com TLS RSA Root CA 2022"
  -     # Certificate "SSL.com TLS ECC Root CA 2022"
  -     # Certificate "SSL.com Client ECC Root CA 2022"
  -     # Certificate "SSL.com Client RSA Root CA 2022"
  -     # Certificate "Atos TrustedRoot Root CA ECC G2 2020"
  -     # Certificate "Atos TrustedRoot Root CA RSA G2 2020"
  -     # Certificate "Atos TrustedRoot Root CA ECC TLS 2021"
  -     # Certificate "Atos TrustedRoot Root CA RSA TLS 2021"
  -     # Certificate "TrustAsia Global Root CA G3"
  -     # Certificate "TrustAsia Global Root CA G4"
  -     # Certificate "CommScope Public Trust ECC Root-01"
  -     # Certificate "CommScope Public Trust ECC Root-02"
  -     # Certificate "CommScope Public Trust RSA Root-01"
  -     # Certificate "CommScope Public Trust RSA Root-02"
  -     # Certificate "D-Trust SBR Root CA 1 2022"
  -     # Certificate "D-Trust SBR Root CA 2 2022"
  -     # Certificate "Telekom Security SMIME ECC Root 2021"
  -     # Certificate "Telekom Security TLS ECC Root 2020"
  -     # Certificate "Telekom Security SMIME RSA Root 2023"
  -     # Certificate "Telekom Security TLS RSA Root 2023"
  -     # Certificate "FIRMAPROFESIONAL CA ROOT-A WEB"
  -     # Certificate "SECOM Trust.net"
  -     # Certificate "Chambers of Commerce Root"
  -     # Certificate "VeriSign Class 2 Public Primary Certification Authority - G3"
  -     # Certificate "SSL.com Code Signing RSA Root CA 2022"
  -     # Certificate "SSL.com Code Signing ECC Root CA 2022"


author: David Howells <dhowells@redhat.com> 0.10.6-1
changelog:
  - Note the correct licence.
  - Handle malformed kernel status correctly.
  - Permit culling to be disabled on the command line with the -N flag.
  - Suspend culling when cache space is short and cache objects are pinned.


author: David Howells <dhowells@redhat.com> 0.10.8-1
changelog:
  - Use systemd interaction macros in specfile installation sections [RH BZ 850053].
  - Fix the service file to use /usr/sbin/ rather than /sbin/.
  - Turn on RELRO and PIE build hardening in RPM builds.


author: Jan Macku <jamacku@redhat.com> - 1.15-1
changelog:
  - spec: sync specfile with Fedora
  - makefile: Use rpmdev-bumpspec's legacy date option
  - Add feature to generate specfile entry, commit and archive


author: Jan Macku <jamacku@redhat.com> - 1.16-1
changelog:
  - alternatives: add --keep-foreign (#57)
  - Translations update from Weblate
  - ci: Onboard chkconfig to Packit
  - zanata: remove zanata related stuff
  - Use make macros
  - alternatives: use one function for path cleaning
  - CI: specify more closely when to run CI
  - Add basic CI and README
  - spec: sync specfile with Fedora


author: Jan Macku <jamacku@redhat.com> - 1.19.2-1
changelog:
  - alternatives: --keep-foreign incorrectly handles non-existent files
  - alternatives: isLink should return 0 in case of lstat error
  - spec: Replace not working awk command with sed (#63)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.3-2
changelog:
  - move pidfile to /var/run/chrony to allow chronyd to remove it on exit
    (#1584585)
  - avoid blocking in getrandom system call (#1592425)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.3-3
changelog:
  - fix PIDFile in local chronyd.service on upgrades from chrony < 3.3-2
    (#1614800)
  - add workaround for late reload of unit file (#1614751)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.5-1
changelog:
  - update to 3.5 (#1685469 #1677218)
  - fix shellcheck warnings in helper scripts (#1711948)
  - update ntp2chrony script


author: Miroslav Lichvar <mlichvar@redhat.com> 4.1-1
changelog:
  - update to 4.1 (#1895003 #1847853 #1929157)
  - add NetworkManager dispatcher script to add servers from DHCP even without
    dhclient (#1933139)
  - restrict permissions of /var/lib/chrony and /var/log/chrony (#1939295)
  - reset chrony-helper state after stopping chronyd (#1971697)
  - add gcc-c++ and make to build requirements
  - move default paths in /var/run to /run


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2-1
changelog:
  - update to 4.2 (#2062356)
  - fix chrony-helper to delete sources by their original name (#2061660)
  - update ntp2chrony script (#2018045 #2063766)


author: Miroslav Lichvar <mlichvar@redhat.com> 1.23-2.20081106gitbe42b4
changelog:
  - fix info uninstall
  - generate random command key in init script
  - support cyclelogs, online, offline commands in init script
  - add logrotate script


author: Miroslav Lichvar <mlichvar@redhat.com> 1.24-1
changelog:
  - update to 1.24 (#555367, CVE-2010-0292 CVE-2010-0293 CVE-2010-0294)
  - modify default config
    - step clock on start if it is off by more than 100 seconds
    - disable client log
  - build with -fPIE on sparc


author: Miroslav Lichvar <mlichvar@redhat.com> 1.24-4.20100428git73d775
changelog:
  - update to 20100428git73d775
  - replace initstepslew directive with makestep in default config
  - add NetworkManager dispatcher script
  - add dhclient script
  - retry server/peer name resolution at least once to workaround
    NetworkManager race condition on boot
  - don't verify chrony.keys


author: Miroslav Lichvar <mlichvar@redhat.com> 1.25-0.1.pre1
changelog:
  - update to 1.25-pre1
  - use iburst, four pool servers, rtcsync, stratumweight in default config
  - add systemd support
  - drop sysconfig file 
  - suppress install-info errors


author: Miroslav Lichvar <mlichvar@redhat.com> 1.26-0.1.pre1
changelog:
  - update to 1.26-pre1
  - fix service name in %triggerun
  - drop SysV init script
  - add chrony-wait service


author: Miroslav Lichvar <mlichvar@redhat.com> 1.26-3.20110831gitb088b7
changelog:
  - update to git snapshot 20110831gitb088b7
  - on first start generate password with 16 chars
  - change systemd service type to forking
  - add forced-command to chrony-helper (#735821)


author: Miroslav Lichvar <mlichvar@redhat.com> 1.26-5.20110831gitb088b7
changelog:
  - improve chrony-helper to keep track of servers added from DHCP (#787042)
  - fix dhclient script to always return with zero exit code (#767859)


author: Miroslav Lichvar <mlichvar@redhat.com> 1.27-0.5.pre1.git1ca844
changelog:
  - update to git snapshot 1ca844
  - update systemd integration (#846303)
  - use systemd macros if available (#850151)
  - use correct vendor pool.ntp.org zone on RHEL (#845981)
  - don't log output of chrony-wait service


author: Miroslav Lichvar <mlichvar@redhat.com> 1.27-1
changelog:
  - update to 1.27
  - start chrony-wait service with chronyd
  - start chronyd service after sntp
  - remove obsolete macros


author: Miroslav Lichvar <mlichvar@redhat.com> 1.27-2
changelog:
  - suppress error messages from tr when generating key (#907914)
  - fix delta calculation with extreme frequency offsets


author: Miroslav Lichvar <mlichvar@redhat.com> 1.27-3
changelog:
  - disable chrony-wait service by default (#961047)
  - drop old systemd scriptlets
  - don't own ntp-units.d directory
  - move files from /lib
  - remove unncessary dependency on syslog target


author: Miroslav Lichvar <mlichvar@redhat.com> 1.30-0.1.pre1
changelog:
  - update to 1.30-pre1
  - execute test suite
  - avoid calling systemctl in helper script
  - call chronyc directly from logrotate and NM dispatcher scripts
  - add conflict with systemd-timesyncd service


author: Miroslav Lichvar <mlichvar@redhat.com> 1.31-1
changelog:
  - update to 1.31
  - add servers from DHCP with iburst option by default
  - use upstream configuration files and scripts
  - don't package configuration examples
  - compress chrony.txt


author: Miroslav Lichvar <mlichvar@redhat.com> 2.1-1
changelog:
  - update to 2.1
  - extend chrony-helper to allow using servers from DNS SRV records (#1234406)
  - set random seed in testing to get deterministic results


author: Miroslav Lichvar <mlichvar@redhat.com> 2.2-0.1.pre1
changelog:
  - update to 2.2-pre1
  - enable seccomp support
  - use weak dependency for timedatex on Fedora 24 and later


author: Miroslav Lichvar <mlichvar@redhat.com> 3.1-4
changelog:
  - use ID from /etc/os-release to set pool.ntp.org vendor zone (#1443599)
  - fix seccomp filter for new glibc once again
  - don't drop PHC samples with zero delay


author: Miroslav Lichvar <mlichvar@redhat.com> 3.2-2
changelog:
  - fix chronyc getting stuck in infinite loop after clock step
  - don't allow packaging without vendor zone
  - suggest ntp-refclock
  - remove obsolete dependency
  - update description


author: Miroslav Lichvar <mlichvar@redhat.com> 4.5-2.el8_10
changelog:
  - fix crash on reload command during start (RHEL-59112)
  - enable AES-CMAC support using gnutls (RHEL-59032)


author: Weitao Zhou <zhouweitao@openanolis.org> 4.5-2.0.1
changelog:
  - Fix unavailable time server for Anolis OS
  - skip test error for loongarch64 (zhangwenlong@loongson.cn)


author: David King <amigadave@amigadave.com> - 0.16-1
changelog:
  - Update to 0.16 (#1144863)
  - Remove clean section and BuildRoot tag
  - Update URL and Sourc0
  - Use license macro for COPYING
  - Use parallel make flags
  - Preserve timestamps during install


author: Jeff Layton <jlayton@redhat.com> - 6.7-5
changelog:
  - more updates, switch to rst for manpages
  - update mount.cifs manpage to describe defaults better (BZ#1474539)


author: Sachin Prabhu <sprabhu@redhat.com> - 6.8-3
changelog:
  - Add manual gating tests
  - docs: cleanup rst formating
  - mount.cifs.rst: document new (no)handlecache mount option
  - manpage: update mount.cifs manpage with info about rdma option
  - checkopts: add python script to cross check mount options
  - mount.cifs.rst: document missing options, correct wrong ones
  - checkopts: report duplicated options in man page
  - mount.cifs.rst: more cleanups
  - mount.cifs.rst: document vers=3 mount option
  - mount.cifs.rst: document vers=3.02 mount option
  - cifs: Allow DNS resolver key to expire
  - mount.cifs: be more verbose and helpful regarding mount errors
  - Update mount.cifs with vers=default mount option and SMBv3.0.2
  - mount.cifs.rst: update vers=3.1.1 option description
  - getcifsacl: Do not go to parse_sec_desc if getxattr fails.
  - getcifsacl: Improve help usage and add -h option.
  - setcifsacl: fix adding ACE when owner sid in unexpected location
  - cifs.upcall: fix a compiler warning
  - mount.cifs Add various missing parms from the help text
  - mount.cifs: add more options to help message
  - mount.cifs: detect GMT format of snapshot version
  - Update man page for mount.cifs to add new options
  - mount.cifs.rst: mention kernel version for snapshots
  - Fix authors and maintainers


author: Packit <hello@packit.dev> - 297-1
changelog:
  - users: allow administrators to change the user shell
  - Enable Python bridge on Fedora 38 and CentOS/RHEL 9


author: Packit <hello@packit.dev> - 299-1
changelog:
  - Kdump: Show location of kdump to verify the successful configuration test
  - Storage: Support for no-overprovisioning with Stratis
  - Storage: Cockpit can now add caches to encrypted Stratis pools


author: Packit <hello@packit.dev> - 300-1
changelog:
  - Celebrating the Nürnberg life release!
  - Storage: Support for growing block devices of a Stratis pool


author: Patrick Uiterwijk (LOCAL) <puiterwijk@redhat.com> - 0.2-0.3.5e1faadgit
changelog:
  - Fixed license tag
  - Updated to new FSF address upstream
  - Removing libgsystem before build
  - Now claiming specific manpages
  - Made the config files noreplace
  - Removed the test assets
  - Put the web assets in a subpackage


author: Stef Walter <stefw@redhat.com> 0.18-1
changelog:
  - Update to 0.18 release
  - Add glib-networking build requirement
  - Let selinux-policy-targetted distribute selinux policy


author: Stef Walter <stefw@redhat.com> - 0.26-1
changelog:
  - Update to 0.26 release
  - Can see disk usage on storage page rhbz#1142459
  - Better order for lists of block devices rhbz#1142443
  - Setting container memory limit fixed rhbz#1142362
  - Can create storage volume of maximum capacity rhbz#1142259
  - Fix RAID device Bitmap enable/disable error rhbz#1142248
  - Docker page connects to right machine rhbz#1142229
  - Clear the format dialog label correctly rhbz#1142228
  - No 'Drop Privileges' item in menu for root rhbz#1142197
  - Don't flash 'Server has closed Connection on logout rhbz#1142175
  - Non-root users can manipulate user accounts rhbz#1142154
  - Fix strange error message when editing user accounts rhbz#1142154


author: Stef Walter <stefw@redhat.com> - 0.27-1
changelog:
  - Update to 0.27 release
  - Don't create cockpit-*-admin groups rhbz#1145135
  - Fix user management for non-root users rhbz#1140562
  - Fix 'out of memory' error during ssh auth rhbz#1142282


author: Peter <petervo@redhat.com> - 0.49-1
changelog:
  - Update to 0.49 release.
  - cockpitd was renamed to cockpit-wrapper the cockpit-daemon
    package was removed and is now installed with the
    cockpit-bridge package.


author: Peter <petervo@redhat.com> - 0.63-1
changelog:
  - Update to 0.63 release
  - Remove cockpit-docker for armv7hl while docker
    packages are being fixed


author: Stef Walter <stefw@redhat.com> - 0.73-1
changelog:
  - * Kubernetes UI can connect to non-local API server
  - * Automate Web Service container build on Docker Hub
  - * Add validation options to TLS client connections
  - * PAM pam_ssh_add.so module for loading SSH keys based on login password
  - * Build, testing and other fixes


author: Stef Walter <stefw@redhat.com> - 0.74-1
changelog:
  - * Display an intelligent message when password auth is not possible
  - * Correctly start terminal in home directory
  - * NetworkManager code is in a separate package
  - * PCP is an optional build dependency
  - * Lots of bugs, build and testing fixes


author: petervo <petervo@redhat.com> - 0.75-1
changelog:
  - New design for kubernetes listing pages
  - Namespace filter for kubernetes
  - Pretty http error pages
  - Lots of bugs, build and testing fixes


author: Stef Walter <stefw@redhat.com> - 0.76-1
changelog:
  - * Fix displaying of network bonds
  - * Better Kubernetes filter bar, shell access
  - * Show some Openshift related objects
  - * Use patternfly v2.2


author: Stef Walter <stefw@redhat.com> - 0.77-1
changelog:
  - * Work better with multipath storage
  - * Deletion of kubernetes objects
  - * Cleaner URLs in the bookmark bar
  - * Show a warning when adding too many machines
  - * Make authentication work when embedding Cockpit
  - * Complete componentizing Cockpit


author: Marcin Juszkiewicz <mjuszkiewicz@redhat.com> - 0.77-1.1
changelog:
  - disable FMA support to get it pass all tests on secondary architectures
  - removed duplicated "global rel 1"


author: Stef Walter <stefw@redhat.com> - 0.78-1
changelog:
  - * Fix extreme CPU usage issue in 0.77 release
  - * Fix compatibility with older releases
  - * Offer to activate multipathd for multipath disks
  - * Guide now contains insight into feature internals
  - * Lots of other minor bug fixes


author: Stef Walter <stefw@redhat.com> - 0.79-1
changelog:
  - * Vagrant file for Cockpit development
  - * Use libvirt for testing
  - * Display only last lines of Kubernetes container logs


author: Stef Walter <stefw@redhat.com> - 0.80-1
changelog:
  - * UI for loading, viewing, changing Private SSH Keys
  - * Always start an ssh-agent in the cockpit login session
  - * New listing panel designs
  - * Lots of testing and bug fixes


author: Stef Walter <stefw@redhat.com> - 0.81-1
changelog:
  - * Allow configuring NTP servers when used with timesyncd
  - * Fix regression in network configuration switches
  - * Make the various graphs look better
  - * Openshift Routes and Deployment Configs can be removed
  - * Run integration tests using TAP "test anything protocol"
  - * Lots of other bug fixes and cleanup


author: Stef Walter <stefw@redhat.com> - 0.82-1
changelog:
  - * Support certificate chains properly in cockpit-ws
  - * Rename the default self-signed certificate
  - * Implement distributed integration testing


author: Stef Walter <stefw@redhat.com> - 0.83-1
changelog:
  - * Fix NTP server configuration bugs
  - * Kubernetes dashboard topology icons don't leave the view
  - * Kubernetes dashboard uses shared container-terminal component
  - * Fix race when adding machine to Cockpit dashboard
  - * Updated documentation for running new distributed tests
  - * Lots of other bug and testing fixes


author: Stef Walter <stefw@redhat.com> - 0.84-1
changelog:
  - * Add a cockpit manual page
  - * Set correct SELinux context for certificates
  - * Remove custom SELinux policy
  - * Testing and bug fixes


author: Stef Walter <stefw@redhat.com> - 0.86-1
changelog:
  - * SOS report UI page
  - * Simpler way for contributors to build cockpit RPMs
  - * Infrastructure for implementing downloads


author: Stef Walter <stefw@redhat.com> - 0.87-1
changelog:
  - * Fix login on Windows, don't prompt for additional auth
  - * Use the machine host name in the default self-signed certificate
  - * Cockpit release tarballs are now distributed in tar-ustar format
  - * Allow overriding package manifests
  - * Testing and build fixes


author: Stef Walter <stefw@redhat.com> - 0.88-1
changelog:
  - * User interface for OSTree upgrades and rollbacks
  - * General reusable purpose angular kubernetes client code
  - * Allow custom login scripts for handling authentication
  - * A specific dashboards can now be the default destination after login
  - * Kill ssh-agent correctly when launched by cockpit-bridge
  - * Add a new cockpit-stub bridge for non-local access


author: Stef Walter <stefw@redhat.com> - 0.89-1
changelog:
  - * Start routine testing of Cockpit on Debian Unstable
  - * Make the config file case insensitive
  - * Reorder graphs on server summary page
  - * Don't suggest syncing users when adding a machine to dashboard
  - * Enable weak dependencies for F24+
  - * Show correct data in per interface network graphs
  - * Fix the Vagrantfile to pull in latest Cockpit
  - * Add Content-Security-Policy header support


author: Stef Walter <stefw@redhat.com> - 0.90-1
changelog:
  - * Fix Content-Security-Policy which broke loading in certain situations
  - * Deal correctly with failures trying to join unsupported domains
  - * Add documentation about Cockpit startup
  - * Better data in storage usage graphs
  - * Start creating debian source packages


author: Stef Walter <stefw@redhat.com> - 0.91-1
changelog:
  - * Fix computing of graph samples on 32-bit OS
  - * Distribute licenses of included components
  - * Distribute development dependencies
  - * Support 'make clean' properly in the tarball


author: Stef Walter <stefw@redhat.com> - 0.92-1
changelog:
  - * OAuth login support
  - * Update Patternfly
  - * Log to stderr when no journal
  - * Make sosreport work on RHEL and Atomic


author: Stef Walter <stefw@redhat.com> - 0.93-1
changelog:
  - * Set system performance profile via tuned
  - * Support for WebSocket client in cockpit-bridge
  - * Support using Nulecule with Openshift
  - * Actually exit cockpit-ws when it's idle


author: Stef Walter <stefw@redhat.com> - 0.94-1
changelog:
  - * Handle interruptions during cockpit-ws start while reading from /dev/urandom
  - * Remove BIOS display from Server Summary page
  - * Support tuned descriptions
  - * Fix Content-Security-Policy in example manifest.json files


author: Stef Walter <stefw@redhat.com> - 0.95-1
changelog:
  - * iSCSI initiator support on the storage page
  - * Page browser title now uses on operating system name
  - * Better look when Cockpit disconnects from the server
  - * Avoid use of NFS in the Vagrantfile
  - * Expand 'Tools' menu when navigating to one of its items
  - * Set a default $PATH in cockpit-bridge


author: Stef Walter <stefw@redhat.com> - 0.102-1
changelog:
  - * Can configure Docker restart policy for new containers
  - * Use a single dialog for creating logical volumes
  - * Package and test the storage UI on Debian
  - * Don't offer 'Computer OU' when joining IPA domains
  - * Don't distribute jshint build dependency due to its non-free license


author: Stef Walter <stefw@redhat.com> - 0.103-1
changelog:
  - * Strict Content-Security-Policy for subscriptions component
  - * New dialog for Kubernetes connection configuration
  - * Release to a cockpit-project Ubuntu PPA
  - * Remove jQuery usage from cockpit.js
  - * New styling for cluster dashboard
  - * Fix build issue on MIPS


author: Stef Walter <stefw@redhat.com> - 0.104-1
changelog:
  - * Show errors correctly when deleting or modifying user accounts
  - * Add support for iSCSI cluster volumes
  - * Strict Content-Security-Policy in the dashboard, sosreport and realmd code
  - * Better list expansion and navigation behavior across Cockpit
  - * Don't show 'Computer OU' field when leaving a domain
  - * Remove usage of bootstrap-select
  - * Show errors properly in performance profile dialog
  - * Fix Cluster sidebar to react to window size
  - * Allow specifying specific tags in registry image streams
  - * Make registry project access policy more visible


author: Stef Walter <stefw@redhat.com> - 0.105-1
changelog:
  - * Strict Content-Security-Policy in all shipped components of Cockpit
  - * Can now add and remove Openshift users to and from groups
  - * Add timeout setting for Cockpit authentication
  - * Registry interface now has checkbox for mirroring from insecure registries
  - * Kubernetes dashboard now allows deletion of Nodes


author: Stef Walter <stefw@redhat.com> - 0.106-1
changelog:
  - * Add namespaces to cockpit CSS classes
  - * Display container image layers in a simpler graph
  - * Hide actions in Cluster projects listing that are not accessible


author: Stef Walter <stefw@redhat.com> - 0.107-1
changelog:
  - * Display image stream import errors
  - * Add GlusterFS persistent volumes in Cluster dashboard
  - * Show a list of pending persistent volume claims
  - * jQuery Flot library is no longer part of the base1 package
  - * Fix Content-Security-Policy issues with jQuery Flot


author: Stef Walter <stefw@redhat.com> - 0.108-1
changelog:
  - * SELinux troubleshooting alerts can now be dismissed
  - * Show SELinux icon for critical alerts
  - * SELinux enforcing mode can be turned off and on with a switch
  - * Kubernetes Nodes are now include charts about usage data
  - * Fix Debian dependency on Docker
  - * Update the look and feel of the toggle switch
  - * Update ListenStream documentation to include address info


author: Dominik Perpeet <dperpeet@redhat.com> - 0.109-1
changelog:
  - * API stabilization, structural cleanup
  - * SELinux Troubleshooting: documentation, support latest API
  - * Update Patternfly
  - * Use CockpitLang cookie and Accept-Language for localization
  - * Can now click through to perform administration tasks on Nodes on the Cluster dashboard
  - * Cockpit terminal now supports shells like fish


author: Stef Walter <stefw@redhat.com> - 0.111-1
changelog:
  - * Tarball build issue in 0.110 is now fixed
  - * The Containers page layouts have been tweaked
  - * Make the Containers resource limits work again
  - * Registry image now have layers displayed correctly


author: Stef Walter <stefw@redhat.com> - 0.112-1
changelog:
  - * Don't show network interfaces where NM_CONTROLLED=no is set
  - * Add textual fields to container memory and CPU sliders
  - * Display contianer memory and CPU resources on Debian
  - * Disable tuned correctly when clearing a performance profile
  - * Fix SELinux enforcing toggle switch and status


author: Stef Walter <stefw@redhat.com> - 0.113-1
changelog:
  - * Show timer information for systemd timer jobs
  - * Use 'active-backup' as the default for new network bonds
  - * When changing system time check formats properly
  - * Hide the machine asset tag when no asset exists
  - * Disable the network on/off switch for unknown or unmanaged interfaces
  - * Show full string for system hardware info and operating system name


author: Stef Walter <stefw@redhat.com> - 0.114-1
changelog:
  - .104
  - * Network configuration of the Ethernet MTU
  - * Red Hat Subscriptions can now specify activation keys and orgs
  - * Start integration testing on CentOS
  - * SSH Host keys are show on system page
  - * Machine ID is shown on system page
  - * Show intelligent password score error messages


author: Stef Walter <stefw@redhat.com> - 0.115-1
changelog:
  - * Setup Docker container and image storage through the UI
  - * Use Webpack to build Cockpit UI packages
  - * Update the Cockpit Vagrant development box to use Fedora 24


author: Stef Walter <stefw@redhat.com> - 0.116-1
changelog:
  - * Support for volumes when starting a docker container
  - * Support for setting environment variables in a docker container
  - * Fix regressions that broke display of localized text


author: Stef Walter <stefw@redhat.com> - 0.117-1
changelog:
  - * Add support for network teams
  - * Select translations for complex language names
  - * Don't allow formating extended partitions
  - * Can configure Openshift Registry so anonymous users can pull images


author: Stef Walter <stefw@redhat.com> - 118-1
changelog:
  - Support PAM conversations on the Login screen
  - Users can create systemd timer jobs
  - Provide default names for volume groups and logical volumes
  - Make Docker graphs work on Debian
  - Only offer to format disks with supported file systems
  - Show all managed NetworkManager devices
  - Use webpack for building Cockpit javascript
  - Cockpit URLs can be proxied with a configured HTTP path prefix
  - Allow Cockpit packages to require a minimum version of Cockpit
  - Translations fixes


author: petervo <petervo@redhat.com> - 119-1
changelog:
  - Adds basic VM Management and Monitoring
  - MDRaid job improvements
  - Show unmanaged network devices
  - Better errors when formating storage devices
  - Updated VNC example
  - Port subscriptions package to react
  - Allow branding.css to overide shell css


author: Stef Walter <stefw@redhat.com> - 120-1
changelog:
  - New containers page layout
  - Quick filtering of containers and images on the container page
  - Added sidebar for phisical volumes in a volume group
  - Run a separate cockpit-ssh process when making SSH connections
  - Allow connecting to remote machines from the login page
  - Only connect to remote machines already known to Cockpit
  - Fix bugs preventing journal page from working on Firefox 49
  - Add tooltip describing group name in Roles list


author: Stef Walter <stefw@redhat.com> - 121-1
changelog:
  - Network Manager Checkpoints
  - Add Debian Branding
  - Fix GSSAPI login on Debian and Ubuntu
  - Generate map files for debugging Javascript and CSS


author: Stef Walter <stefw@redhat.com> - 122-1
changelog:
  - Works with UDisks in addition to storaged
  - Allow logging into other systems from login page
  - Explicitly specify javascript dependency versions


author: Stef Walter <<stefw@redhat.com>> - 123-1
changelog:
  - Release a second tarball with cached javascript dependencies
  - Start verifying that Cockpit works on Ubuntu 16.04
  - Enable and verify the network functionality on Debian
  - Integration tests now log core dumps for diagnosis


author: Stef Walter <<stefw@redhat.com>> - 124-1
changelog:
  - Build and test on Debian Jessie
  - Deprecate older javascript files
  - Properly terminate user sessions on the Accounts page
  - Fix regression on login screen in older Internet Explorer browsers
  - Fix regression where Date Picker was not shown in System Time dialog


author: Stef Walter <<stefw@redhat.com>> - 125-1
changelog:
  - Cockpit is now properly translatable
  - Display OSTree signatures
  - New expandable views for storage devices
  - No longer offer to format read-only block devices
  - Use stored passphrases for LUKS devices properly
  - Start testing on RHEL 7.3
  - More strict about transport channels a bridge accepts
  - System shutdown can be scheduled by date


author: Stef Walter <<stefw@redhat.com>> - 126-1
changelog:
  - Show security scan information about containers
  - Choose whether password is cached and reused on login screen
  - Allow renaming of active devices in networking interface
  - More clearly indicate when checking network connectivity
  - The remotectl command can now combine certificate and key files
  - Support Openshift's certificate autogeneration when used as a pod
  - The remotectl tool now checks for keys in certificate files
  - Domain join operations can now be properly cancelled
  - Make Kerberos authentication work even if gss-proxy is in use
  - Javascript code can now export DBus interfaces
  - When proxied, support X-Forwarded-Proto
  - Ignore block devices with a zero size in the storage interface


author: Stef Walter <<stefw@redhat.com>> - 129-1
changelog:
  - Diagnostic sosreport feature now works on RHEL Atomic again
  - The configure script has a --disable-ssh option to toggle libssh dep
  - The configure --disable-ws option has been replaced with above.
  - Unit tests have been fixed on recent GLib versions
  - Several Fedora and Debian packaging fixes


author: Stef Walter <<stefw@redhat.com>> - 130-1
changelog:
  - cockpit.file() can read non-memory-mappable file
  - Add kdump configuration user interface
  - Allow container Registry Console user names with '@' sign


author: Stef Walter <<stefw@redhat.com>> - 131-1
changelog:
  - Show session virtual machines on Machines page
  - Fix use of the TAB key on login page
  - Robust naming and detection of network bond master
  - Debian packaging fixes


author: Martin Pitt <<mpitt@redhat.com>> - 132-1
changelog:
  - Make basic SELinux functionality available without setroubleshootd
  - Allow changing the MAC address for ethernet adapters and see them for bonds
  - Hide "autoconnect" checkbox for network devices without settings
  - Support for external providers other than libvirt on Machines page
  - Some tooltip fixes
  - Add option to restrict max read size to the Cockpit file API
  - Relax dependencies on cockpit-bridge package on Debian/Ubuntu
  - Rename cockpit-test-assets package to cockpit-tests
  - When touching patched files handle case of only one file
  - Always build the cockpit-tests subpackage


author: Martin Pitt <<mpitt@redhat.com>> - 133-1
changelog:
  - Remotely managed machines are now configured in /etc/cockpit/machines.d/*.json
  - Fix NetworkManager's "MTU" dialog layout
  - Build the cockpit-tests package for releases too
  - Split translations into individual packages
  - Packages now configure alternate cockpit-bridge's to interact with the system


author: Martin Pitt <<mpitt@redhat.com>> - 134-1
changelog:
  - Show /etc/motd in the "System" task page
  - Drop "System" service actions which are intended for scripts
  - Make login page translatable
  - NetworkManager now activates slave interfaces by itself
  - Add call timeout option to the cockpit.dbus() API
  - The Debian packaging is now able to apply binary patches


author: Martin Pitt <<mpitt@redhat.com>> - 137-1
changelog:
  - Read ~/.ssh/known_hosts for connecting to remote machines with ssh
  - The Storage LVM setup can add unpartitioned free space as a physical volume
  - NetworkManager's Team plugin can be used on architectures other than x86_64
  - Cockpit's web server understands and properly responds to HTTP HEAD requests
  - Allow parameter substitution in manifest when spawning peer bridges


author: Stef Walter <<stefw@redhat.com>> - 138-1
changelog:
  - Only allow mdraid disk removal when it won't destroy data
  - Allow DN style usernames in the Kubernetes dashboard
  - Simplify protocol that cockpit talks to session authentication processes


author: Martin Pitt <<mpitt@redhat.com>> - 139-1
changelog:
  - Show more information about virtual machines, such as boot order
  - Fix enablement of timer systemd units created on Services page
  - Fix Storage crash on multiple iSCSI sessions
  - cockpit-docker is now installable with docker-ce or other alternatives
  - Hide docker push commands on Registry image pages for  "pull" roles


author: Martin Pitt <<martin@piware.de>> - 142-1
changelog:
  - Virtual machines display an interactive console, either in browser, or a popup viewer
  - Fix Virtual Machines operations on non-English locales
  - Add documentation explaining how to grant/restrict access via polkit rules


author: Martin Pitt <<martin@piware.de>> - 143-1
changelog:
  - Add "Software Updates" page for package (rpm/deb) based operating systems
  - Fix cockpit-machines package to make inline VNC console actually work
  - Fix Kubernetes authentication when Kubernetes configured for RBAC
  - Build Docker page for s390x architecture


author: Martin Pitt <martin@piware.de> - 145-1
changelog:
  - Resize the terminal dynamically to use all available space
  - Let the Machines page update immediately after changes
  - Add delete VM functionality to the Machines page
  - Retire support for external Machines provider API
  - Always recommend rebooting after applying Software Updates
  - Group D-Bus channels to avoid hitting connection limits
  - Fix building on Fedora Rawhide/glibc 2.25.90


author: Martin Pitt <martin@piware.de> - 146-1
changelog:
  - Show recent updates and live update log on Software Updates page
  - Improve available Software Updates table layout for small/mobile screens
  - Support OAuth Kubernetes logins to work with Google Compute Engine
  - Fix reporting ABRT crashes that are already known to the server
  - Scroll the virtual machine VNC console into view automatically


author: petervo <petervo@redhat.com> - 149-1
changelog:
  - Support sending non-maskable interrupt to VMs
  - Fix building on fedora 27
  - Add information about non-met conditions for systemd services
  - Clear cockpit cookie on logout


author: Martin Pitt <martin@piware.de> - 150-1
changelog:
  - Automatically enable and start newly created timers on the Services page
  - Support cockpit-dashboard installation into OSTree overlay on Atomic
  - Support Kubernetes basic auth with Google Compute Engine 1.7.x


author: Martin Pitt <martin@piware.de> - 151-1
changelog:
  - Support loading SSH keys from arbitrary paths
  - Support X-Forwarded-Proto HTTP header for Kubernetes
  - Fix Kubernetes connection hangs (regression in version 150)


author: Martin Pitt <martin@piware.de> - 152-1
changelog:
  - Add Applications page
  - Add automatic update configuration for dnf to Software Updates
  - Fix cockpit-bridge crash if /etc/os-release does not exist


author: Martin Pitt <martin@piware.de> - 153-1
changelog:
  - Add cockpit-ovirt package to control oVirt virtual machine clusters
  - Clean up rpmlint/lintian errors in the packages


author: Martin Pitt <martin@piware.de> - 154-1
changelog:
  - Center the "Disconnected" message in the content area
  - Fix two layout regressions on the Cluster page
  - Remove long-obsolete "./configure --branding" option


author: Martin Pitt <martin@piware.de> - 155-1
changelog:
  - Add NFS client support to the Storage page
  - Add "Maintenance" switch for oVirt hosts
  - Fix Terminal rendering issues in Chrome
  - Prevent closing Terminal with Ctrl+W when focused
  - Support the upcoming OpenShift 3.7 release


author: Martin Pitt <martin@piware.de> - 156-1
changelog:
  - Redesign navigation and support mobile browsing
  - Use /etc/cockpit/krb5.keytab if present to support alternate keytabs
  - Add project homepage link to Apps page
  - Maintain issue(5) file with current Cockpit status
  - Use event-driven refresh of oVirt data instead of polling


author: Martin Pitt <martin@piware.de> - 158-1
changelog:
  - Add check boxes for common NFS mount options
  - Clarify Software Update status if only security updates are available
  - Create self-signed certificates with SubjectAltName


author: Martin Pitt <martin@piware.de> - 159-1
changelog:
  - Configure data deduplication with VDO devices on Storage page
  - Add serial console to virtual Machines page and redesign the Consoles tab
  - Show more error message details for failures on virtual Machines page


author: Martin Pitt <martin@piware.de> - 160-1
changelog:
  - Add kubevirt Virtual Machines overview
  - Redesign package list on Software Updates page and show RHEL Errata
  - Install AppStream collection metadata packages on demand on Apps page
  - Add AppStream metadata to cockpit-sosreport for showing up on Apps page
  - Change CPU graphs to use "100%" for a fully loaded multi-processor system
  - Show storage, network, and other numbers with 3 digits of precision
  - Add an example bastion container


author: Martin Pitt <martin@piware.de> - 161-1
changelog:
  - New VMs can be created on Machines page
  - VMs running in Kubernetes can now be deleted
  - Improve LVM volume resizing
  - Add new Hardware Information page
  - Load Application metadata (Appstream) packages on demand on Debian/Ubuntu
  - Rename cockpit-ovirt package to cockpit-machines-ovirt
  - Stop advertising and supporting cockpit-bundled jQuery library


author: Martin Pitt <martin@piware.de> - 163-1
changelog:
  - Drop "Transfer data asynchronously" VDO option on Storage page
  - Hide Docker storage pool reset button when it cannot work properly
  - Update jQuery to version 3.3.1 (deprecated cockpit API!)


author: Martin Pitt <martin@piware.de> - 164-1
changelog:
  - Storage: Move NFS management into new details page
  - System: Show available package updates and missing registration
  - System: Fix inconsistent tooltips
  - Logs: Change severities to officially defined syslog levels
  - Machines: Add error notifications
  - Accessibility improvements
  - Reloading the page in the browser now reloads Cockpit package manifests


author: Martin Pitt <martin@piware.de> - 165-1
changelog:
  - Storage: Show more details of sessions and services that keep NFS busy
  - Machines: Detect if libvirtd is not running
  - Machines: Show virtual machines that are being created


author: Martin Pitt <martin@piware.de> - 166-1
changelog:
  - Kubernetes: Add creation of Virtual Machines
  - Realms: Automatically set up Kerberos keytab for Cockpit web server
  - Numbers now get formatted correctly for the selected language


author: Martin Pitt <martin@piware.de> - 171-1
changelog:
  - Machines: Add virtual CPU configuration
  - Kubernetes: Add KubeVirt pod metrics
  - Docker: Show container volumes
  - Fix broken actions for non-administrators
  - Networking: Handle non-running NetworkManager
  - Accounts: User role improvements
  - Localize times


author: Martin Pitt <martin@piware.de> - 173-2
changelog:
  - Drop firewalld service (moved to firewalld), add corresponding conflict
    rhbz#1609393
  - Fix CI pipeline tests


author: Martin Pitt <martin@piware.de> - 177-1
changelog:
  - Storage: Support LUKS v2
  - Support centrally-managed SSH known hosts
  - Drop support for Internet Explorer


author: Sanne Raymaekers <sanne.raymaekers@gmail.com> - 179-1
changelog:
  - Machines: Detach disk from VM with LibvirtDBus provider
  - Machines: Offer cockpit-machines as Application


author: Marius Vollmer <mvollmer@redhat.com> - 181-1
changelog:
  - Followup fixes related to the switch away from react-lite
  - Graph layout and color improvements
  - Machines: edit network interfaces
  - Update look of lists to match Patternfly


author: Sanne Raymaekers <sanne.raymaekers@gmail.com> - 182-1
changelog:
  - libvirt connection choice during VM creation
  - PackageKit page update severity tooltip
  - PackageKit page display registration status clearly


author: Martin Pitt <martin@piware.de> - 183-1
changelog:
  - Machines: Manage storage pools
  - Kernel Dump: Support non-local targets
  - Respect SSH configuration
  - Never send Content-Length with chunked encoding


author: Martin Pitt <martin@piware.de> - 184-1
changelog:
  - Machines: Dialog and tab layout is now responsive
  - Storage: Filesystem labels are validated upfront
  - Storage: Some mount options are prefilled when needed
  - Integration of Cockpit pages on the desktop


author: Sanne Raymaekers <sanne.raymaekers@gmail.com> - 185-1
changelog:
  - Responsive dialogs on network, kdump and users page
  - Kubernetes containers included in docker graphs


author: Marius Vollmer <mvollmer@redhat.com> - 187-1
changelog:
  - Machines: More operations for Storage Pools
  - Domains: More information about the joined domain
  - Storage: The options for VDO volumes are explained
  - Machines: Support for oVirt will be dropped in the future


author: Martin Pitt <mpitt@redhat.com> - 188-1
changelog:
  - Machines: Show Storage Volume user
  - Machines: Autostart configuration
  - Terminal: Themes and context menu
  - Storage: Responsive dialogs
  - Software Updates: Show three most recent updates


author: Sanne Raymaekers <sanne.raymaekers@gmail.com> - 189-1
changelog:
  - Machines: Import existing image when creating VM
  - Machines: Introduce virtual networks
  - Services: Filtering of services by name, description, and state


author: Katerina Koukiou <kkoukiou@redhat.com> - 190-1
changelog:
  - Logs: Filter log entries by service
  - Machines: Support for Pausing/Resuming VMs
  - Machines: Make Autostart property of a Virtual Network configurable
  - Machines: Support for creating VM with option to boot from PXE
  - Accessibility improvements


author: Marius Vollmer <mvollmer@redhat.com> - 191-1
changelog:
  - Machines: iSCSI Storage pools
  - Machines: better notifications
  - System: CPU security mitigation
  - Network: Ports in the Firewall


author: Martin Pitt <mpitt@redhat.com> - 192-1
changelog:
  - Machines: Auto-detect guest operating system
  - Translation cleanup
  - Allow accounts with non-standard shells


author: Sanne Raymaekers <sanne.raymaekers@gmail.com> - 193-1
changelog:
  - Machines: iSCSI direct storage pools
  - Storage: The "Format" button is no longer hidden
  - Storage: Improve performance with many block devices


author: Martin Pitt <mpitt@redhat.com> - 198-1
changelog:
  - PatternFly4 user interface design
  - SELinux: Show changes
  - Machines: Deletion of Virtual Networks
  - Machines: Support more disk types
  - Docker: Change menu label
  - Web server: More flexible https redirection for proxies


author: Martin Pitt <mpitt@redhat.com> - 199-1
changelog:
  - Redesigned logs all over cockpit
  - Services: Design and accesibility improvements
  - System: Show DIMM information on Hardware Info page
  - Machines: VM creation dialog now shows the recommended memory for the selected OS
  - cockpit-docker: Avoid file dependency (rhbz#1731686)


author: Martin Pitt <mpitt@redhat.com> - 200-1
changelog:
  - Machines: Type-ahead OS selection
  - Machines: LVM storage pools
  - Networking: Show included firewalld services
  - Web server: Split out TLS handling


author: Sanne Raymaekers <sanne.raymaekers@gmail.com> - 201-1
changelog:
  - Machines: VM creation and import dialog changes
  - Machines: Enable interface type "direct" in NIC configuration
  - systemd: Add more actions to services


author: Marius Vollmer <mvollmer@redhat.com> - 203-1
changelog:
  - shell: Display message when websocket fails early
  - machines: Implement adding virtual network interfaces


author: Martin Pitt <mpitt@redhat.com> - 204-1
changelog:
  - System: Highlight failed services
  - Machines: Configure read-only and shareable disks
  - Playground: Add index page


author: Simon Kobyda <skobyda@redhat.com> - 205-1
changelog:
  - Firewall: UI restructuring
  - Machines: Refactor Create VM dialog and introduce a download option
  - Adjust menu to PatternFly's current navigation design
  - Searching with keywords
  - Software Updates: Use notifications for available updates info
  - Web server security hardening


author: Sanne Raymaekers <sanne.raymaekers@gmail.com> - 206-1
changelog:
  - Machines: Network interface deletion
  - login: Enable administration mode by default
  - Firewall: Prevent accidental deletion


author: Katerina Koukiou <kkoukiou@redhat.com> - 207-1
changelog:
  - Web server: Accept EC certificates
  - Storage: List all software devices in a single panel
  - Redesigned notifications


author: Martin Pitt <mpitt@redhat.com> - 208-1
changelog:
  - Storage: Drop “default mount point” concept
  - Machines: Support transient virtual networks and storage pools
  - Machines: Sliders for disk size and memory in VM creation
  - Logs: Improve crash reporting


author: Marius Vollmer <mvollmer@redhat.com> - 209-1
changelog:
  - New overview design
  - Session timeouts
  - Banners on login screen
  - Client certificate authentication
  - Support for Fedora CoreOS
  - Dropped support for pam_rhost


author: Katerina Koukiou <kkoukiou@redhat.com> - 210-1
changelog:
  - Overview: Add CPU utilization to usage card
  - Dashboard: Support SSH identity unlocking when adding new machines
  - SElinux: Introduce an Ansible automation script
  - Machines: Support “bridge” type network interfaces
  - Machines: Support “bus” type disk configuration


author: Martin Pitt <mpitt@redhat.com> - 211-1
changelog:
  - Better support for various TLS certificate formats
  - Switch from Zanata to Weblate
  - Overview layout optimizations


author: Martin Pitt <mpitt@redhat.com> - 211.1-1
changelog:
  - system: Fix graph layout across all browsers (rhbz#1792623)
  - websocket: Fix unaligned access in send_prefixed_message_rfc6455()


author: Marius Vollmer <mvollmer@redhat.com> - 213-1
changelog:
  - Inline documentation
  - Support for transient virtual machines
  - UEFI for virtual machines
  - Unattended virtual machines installation


author: Martin Pitt <mpitt@redhat.com> - 214.1-1
changelog:
  - Updates: Fix unstyled button regression
  - Machines: Fix slow requests when enabling polkit access driver
  - Deprecate cockpit-docker for Fedora, Debian, and Ubuntu development series


author: sanne raymaekers <sanne.raymaekers@gmail.com> - 216-1
changelog:
  - SELinux: Automatic application of solutions that set booleans
  - Machines: Drop virsh backend support
  - Overview: New “last login” banner


author: Martin Pitt <mpitt@redhat.com> - 218-1
changelog:
  - Services: Improved accessibility and mobile support
  - Overview: Add uptime information
  - Disable idle timeout by default
  - Support building without polkit


author: Matej Marusak <mmarusak@redhat.com> - 220-1
changelog:
  - New navigation with integrated switching of hosts
  - Logs: Inline help for filtering
  - Storage: Improve side panel on details page


author: Marius Vollmer <mvollmer@redhat.com> - 221-1
changelog:
  - Support for Cross-Origin-Resource-Policy
  - Accounts: Some buttons are hidden when access is limited
  - Developers: Importing "base1/patternfly.css" is deprecated


author: Martin Pitt <mpitt@redhat.com> - 221.1-1
changelog:
  - Put back missing base1/patternfly.css
  - Services: Don't offer 'Start Service' in Limited Access mode


author: Martin Pitt <mpitt@redhat.com> - 222-1
changelog:
  - Logs: More flexible text filters
  - Services, Dashboard: Hide some buttons when access is limited
  - Webserver: Lock down cockpit.service privileges


author: Katerina Koukiou <kkoukiou@redhat.com> - 223-1
changelog:
  - Webserver: Standard-conformant lifetime of web server Certificate
  - Certificate authentication against Active Directory


author: Matej Marusak <mmarusak@redhat.com> - 225-1
changelog:
  - machines: Add support for VM snapshots
  - developer API: Launch and reattach to a long-running process


author: Katerina Koukiou <kkoukiou@redhat.com> - 228-1
changelog:
  - Accounts: Allow setting weak passwords
  - Changes to remote host logins
  - Machines: Add support for reverting and deleting VM snapshots
  - Drop cockpit-docker code


author: Matej Marusak <mmarusak@redhat.com> - 231-1
changelog:
  - Replace system's graph page with a completely new USE method page
  - Machines: Reimplement the design of the main VMs list
  - Logging of remote IP addresses


author: Marius Vollmer <mvollmer@redhat.com> - 234-1
changelog:
  - machines: Allow editing VM's CPU mode and model
  - machines: Add support for cloning VMs
  - dashboard: So long


author: Matej Marusak <mmarusak@redhat.com> - 237-1
changelog:
  - Restyling updates page in preparation for upcoming features
  - SSH connections to remote machines are only opened when necessary


author: Katerina Koukiou <kkoukiou@redhat.com> - 238-1
changelog:
  - Updates: List outdated software that needs a restart
  - Web server: Preserve permissions of administrator-provided certificates
  - System: Performance page shows busiest CPU cores
  - Machines: VM disk creation supports a custom path


author: Martin Pitt <mpitt@redhat.com> - 238.1-1
changelog:
  - Several UI alignment fixes
  - Updates: Show PackageKit errors properly
  - Re-drop unit tests from built packages
  - Metrics: Don't show swap column when no swap is present
  - Metrics: Don't show duplicate events


author: Martin Pitt <mpitt@redhat.com> - 239-1
changelog:
  - Terminal: Support for changing the font size
  - Machines: Allow editing disk cache mode
  - Logs: Link to related services page
  - SELinux: Restyle to resemble other pages
  - Packaging: Removed ./configure options for distribution specific packages


author: Marius Vollmer <mvollmer@redhat.com> - 240-1
changelog:
  - New localization: Norwegian Bokmål
  - Performance metrics: Journal integration
  - Machines: support authentication against cloud images


author: Martin Pitt <mpitt@redhat.com> - 244.1-1
changelog:
  - storage: use SHA256 for Tang fingerprints
  - testlib: Eliminate dataclass for RHEL/CentOS 8 compatibility


author: Martin Pitt <mpitt@redhat.com> - 245-1
changelog:
  - Metrics: New PCP configuration dialog
  - Storage: Show both SHA256 and SHA1 Tang fingerprints
  - Release: No more cockpit-cache tarball


author: Marius Vollmer <mvollmer@redhat.com> - 246-1
changelog:
  - Improvements to the build system
  - Polish of the Services and Storage pages
  - Updated translations


author: Katerina Koukiou <kkoukiou@redhat.com> - 247-1
changelog:
  - Metrics: Enable Grafana client setup
  - Machines: Share host files with the guest using virtio-fs
  - Machines: Show list of pass-through devices


author: Allison Karlitskaya <allison.karlitskaya@redhat.com> - 248-1
changelog:
  - Metrics: Install missing packages
  - PAM: Deprecate `pam_cockpit_cert` module
  - Build system cleanups


author: Matej Marusak <mmarusak@redhat.com> - 249-1
changelog:
  - storage: Content table improvements
  - common: Add Content-Type for wasm
  - all: Port away from Moment.js


author: Simon Kobyda <skobyda@redhat.com> - 252-1
changelog:
  - Webserver: Drop remotectl utility
  - Shell: Show package version in ‘About web console’ modal
  - Storage: Encryption is presented as a property of a Filesystem


author: Matej Marusak <mmarusak@redhat.com> - 254-1
changelog:
  - Overview: Move last login to Health Card
  - Webserver: Restrict frame embedding to same origin
  - Login: Add Arch Linux branding
  - Users: Add login history


author: Katerina Koukiou <kkoukiou@redhat.com> - 257-1
changelog:
  - Support for reading TLS certificates with any permissions
  - cockpit-ws no longer supports merged certificates
  - Services: Show user-owned systemd units


author: Martin Pitt <mpitt@redhat.com> - 260-1
changelog:
  - Certificate login validation: Action required on updates
  - Client: Show previously used hosts
  - Client: Support port specification
  - bridge: Warning on missing cockpit-system package


author: Packit <hello@packit.dev> - 270-1
changelog:
  - Services: User-created timer deletion
  - System Diagnostics: Working with diagnostic reports has been improved


author: Packit <hello@packit.dev> - 272-1
changelog:
  - Firewall: Edit custom services
  - Services: Pin services as favorites
  - Login: Dark mode
  - Unprivileged cockpit/ws container mode


author: Packit <hello@packit.dev> - 273-1
changelog:
  - Metrics: Display CPU temperature
  - Networking: Suggest netmask and gateway addresses
  - Software Updates: Optionally reboot after updating
  - cockpit/ws container: Support modern SSH keys


author: Packit <hello@packit.dev> - 274-1
changelog:
  - ws: Fix segfault with channel closing (#17492)
  - Services: Fix time picker behaviour in Timer creation dialog
  - Metrics: Improve CPU temperature sensors detection


author: Packit <hello@packit.dev> - 288-1
changelog:
  - Accounts: Show shell and home directory on detail page
  - Accounts: Custom user ID during account creation
  - Overview: Support additional timeservers with chronyd
  - Metrics: Show longer time span by default
  - Storage: Mounting filesystems at boot time
  - Services: Units need to be re-pinned
  - API removal: Remove cockpit.dbus.publish() and .meta()
  - Development: Cockpit now supports the esbuild bundler


author: Packit <hello@packit.dev> - 289-1
changelog:
  - Metrics: Indicate high usage and use colorblind-friendly colors
  - Accounts: Improve password validation


author: Thierry Vignaud <tvignaud@mandrakesoft.com> 4.5.2-1mdk
changelog:
  - initial release (merge fileutils, sh-utils & textutils)
  - obsoletes/provides: sh-utils/fileutils/textutils
  - fileutils stuff go in 1xx range
  - sh-utils stuff go in 7xx range
  - textutils stuff go in 5xx range
  - drop obsoletes patches 1, 2, 10 (somes files're gone but we didn't ship
    most of them)
  - rediff patches 103, 105, 111, 113, 180, 706
  - temporary disable patch 3 & 4
  - fix fileutils url


author: Thierry Vignaud <tvignaud@mandrakesoft.com> 4.5.2-2mdk
changelog:
  - fix build
  - don't chmode two times su
  - build with large file support
  - fix description
  - various spec cleanups
  - fix chroot installation
  - fix missing /bin/env
  - add old fileutils, sh-utils & textutils ChangeLogs


author: Tim Waugh <twaugh@redhat.com> 4.5.3-3
changelog:
  - Adapted for Red Hat Linux.
  - Self-host for help2man.
  - Don't ship readlink just yet (maybe later).
  - Merge patches from fileutils and sh-utils (textutils ones are already
    merged it seems).
  - Keep the binaries where the used to be (in particular, id and stat).


author: Tim Waugh <twaugh@redhat.com> 4.5.3-4
changelog:
  - Fix scriplets.
  - Fix i18n patch so it doesn't break uniq.
  - Fix several other patches to either make the test suite pass or
    not run the relevant tests.
  - Run 'make check'.
  - Fix file list.


author: Tim Waugh <twaugh@redhat.com> 4.5.10-1
changelog:
  - 4.5.10.
  - Update lug, touch_errno, acl, utmp, printf-ll, i18n, test-bugs patches.
  - Drop fr_fix, LC_TIME, preserve, regex patches.


author: Tim Waugh <twaugh@redhat.com> 5.0-5
changelog:
  - Both kon and kterm support colours (bug #83701).
  - Fix 'ls -l' alignment in zh_CN locale (bug #88346).


author: Tim Waugh <twaugh@redhat.com> 5.0-12
changelog:
  - Don't run 'make check' for this build (build environment problem).
  - Another uninitialized variable in i18n (from bug #98683).


author: Tim Waugh <twaugh@redhat.com> 5.0-13
changelog:
  - Made su use pam again (oops).
  - Fixed another i18n bug causing sort --month-sort to fail.
  - Don't run dubious stty test, since it fails when backgrounded
    (bug #102033).
  - Re-enable make check.


author: Tim Waugh <twaugh@redhat.com> 5.0-20
changelog:
  - Restrict ACL support to only those programs needing it (bug #106141).
  - Fix default PATH for LSB (bug #102567).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Stop 'sort -g' leaking memory (i18n patch bug #115620).
  - Don't ship kill, since util-linux already does.
  - Tidy AFS patch.


author: Tim Waugh <twaugh@redhat.com> 5.2.0-6
changelog:
  - Apply Paul Eggert's chown patch (bug #116536).
  - Merged chdir patch into pam patch where it belongs.


author: Tim Waugh <twaugh@redhat.com> 5.2.1-9
changelog:
  - Mention pam in the info for su (bug #122592).
  - Remove wheel group rant again (bug #122886).
  - Change default behaviour for chgrp/chown (bug #123263).  Patch from
    upstream.


author: Tim Waugh <twaugh@redhat.com> 5.2.1-19
changelog:
  - Added 'gnome' TERM to DIR_COLORS (bug #129112).
  - Worked around a bash bug #129128.
  - Fixed an i18n patch bug in cut (bug #129114).


author: Tim Waugh <twaugh@redhat.com> 5.2.1-21
changelog:
  - Apply upstream patch to fix 'cp -a' onto multiply-linked files (bug #128874).
  - SELinux patch fix: don't error out if lgetfilecon() returns ENODATA.


author: Dan Walsh <dwalsh@redhat.com> 5.2.1-53
changelog:
  - Allow id to run even when SELinux security context can not be run
  - Change chcon to use raw functions.


author: Tim Waugh <twaugh@redhat.com> 5.92-0.1
changelog:
  - 5.92.
  - No longer need afs, dircolors, utmp, gcc4, brokentest, dateseconds,
    chown, rmaccess, copy, stale-utmp, no-sign-extend, fchown patches.
  - Updated acl, dateman, pam, langinfo, i18n, getgrouplist, selinux patches.
  - Dropped printf-ll, allow_old_options, jday, zh_CN patches.
  - NOTE: i18n patch not ported for sort(1) yet.


author: Tim Waugh <twaugh@redhat.com> 5.93-2
changelog:
  - Call setsid() in su under some circumstances (bug #173008).
  - Prevent runuser operating when setuid (bug #173113).


